RTS XCP-48-RJ45 User Manual

Size:
83.76 Kb
Download

XCP-48-RJ45

Breakout Panel Technical Guide

38110509 Rev F

8/2008

PROPRIETARYNOTICE

The product information and design disclosed herein were originated by and are the property of Telex Communications, Inc. Telex reserves all patent, proprietary design, manufacturing, reproduction, use and sales rights thereto, and to any article disclosed therein, except to the extent rights are expressly granted to others.

COPYRIGHTNOTICE

Copyright 2008 by Telex Communications, Inc. All rights reserved. Reproduction, in whole or in part, without prior written permission from Telex is prohibited.

WARRANTYNOTICE

See the enclosed warranty card for further details.

CUSTOMERSUPPORT

Technical questions should be directed to:

Customer Service Department

RTS/Telex Communications, Inc.

12000 Portland Avenue South

Burnsville, MN 55337 USA

Telephone: 800-392-3497

Fax: 800-323-0498

RETURNSHIPPINGINSTRUCTIONS

Customer Service Department

Telex Communications, Inc. (Lincoln, NE) Telephone: 402-467-5321

Fax: 402-467-3279

Factory Service: 800-553-5992

Please include a note in the box which supplies the company name, address, phone number, a person to contact regarding the repair, the type and quantity of equipment, a description of the problem and the serial number(s).

SHIPPING TO THEMANUFACTURER

All shipments of product should be made via UPS Ground, prepaid (you may request from Factory Service a different shipment method). Any shipment upgrades will be paid by the customer. The equipment should be shipped in the original packing carton. If the original carton is not available, use any suitable container that is rigid and of adequate size. If a substitute container is used, the equipment should be wrapped in paper and surrounded with at least four (4) inches of excelsior or similar shock-absorbingmaterial. All shipments must be sent to the following address and must include the Proof of Purchase for warranty repair. Upon completion of any repair the equipment will be returned via United Parcel Service or specified shipper, collect.

Factory Service Department

Telex Communications, Inc.

8601 East Cornhusker Hwy.

Lincoln, NE 68507 U.S.A.

Attn: Service

This package should include the following:

CHAPTER 1

XCP-48-RJ459000-7809-000

Ports

Ports

Ports

Ports

Ports

Ports

1-8

9-16

17-24

25-32

33-40

41-48

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

XCP-48-RJ45

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

6

7

8

5

6

7

8

5

6

7

8

5

6

7

8

5

6

7

8

5

6

7

8

 

 

 

 

 

TELEX COMMUNICATIONS, INC.

 

 

 

 

 

MADE IN U.S.A.

J1

J2

J3

J4

J5

J6

FIGURE 1. XCP-48-RJ45

The XCP-48-RJ45is the newly created48-portRJ-45breakout panel with MDR connector for theAIO-16and Cronus. It allow you to expand the number ofRJ-45ports on the Intercom system.

NOTE:

When using the 48-portRJ-45breakout panel,

 

 

you MUST use the MDR backcard for both the

 

 

AIO-16and Cronus.

 

 

 

 

 

 

RJ-45

 

 

 

 

 

Pin 1

 

N/A

 

 

 

 

 

Pin 2

 

Keypanel Data -

 

 

 

 

 

Pin 3

 

Audio Out +

 

 

 

 

 

Pin 4

 

Audio In +

 

 

 

 

 

Pin 5

 

Audio In -

 

 

 

 

 

Pin 6

 

Audio Out -

 

 

 

 

 

Pin 7

 

Keypanel Data +

 

 

 

 

 

Pin 8

 

N/A

 

 

 

 

MDR Connector

Pin Number

Port

Function

 

 

 

8

1

Data +

 

 

 

33

1

Data -

 

 

 

24

1

Audio To Matrix +

 

 

 

49

1

Audio To Matrix -

 

 

 

25

1

Audio From Matrix +

 

 

 

50

1

Audio From Matrix -

 

 

 

 

 

 

7

2

Data +

 

 

 

32

2

Data -

 

 

 

22

2

Audio To Matrix +

 

 

 

47

2

Audio To Matrix -

 

 

 

23

2

Audio From Matrix +

 

 

 

48

2

Audio From Matrix -

 

 

 

3

MDR Connector

Pin Number

Port

Function

 

 

 

 

 

 

6

3

Data +

 

 

 

31

3

Data -

 

 

 

20

3

Audio To Matrix +

 

 

 

45

3

Audio To Matrix -

 

 

 

21

3

Audio From Matrix +

 

 

 

46

3

Audio From Matrix -

 

 

 

 

 

 

5

4

Data +

 

 

 

30

4

Data -

 

 

 

18

4

Audio To Matrix +

 

 

 

43

4

Audio To Matrix -

 

 

 

19

4

Audio From Matrix +

 

 

 

44

4

Audio From Matrix -

 

 

 

 

 

 

4

5

Data +

 

 

 

29

5

Data -

 

 

 

16

5

Audio To Matrix +

 

 

 

41

5

Audio To Matrix -

 

 

 

17

5

Audio From Matrix +

 

 

 

42

5

Audio From Matrix -

 

 

 

 

 

 

3

6

Data +

 

 

 

28

6

Data -

 

 

 

14

6

Audio To Matrix +

 

 

 

39

6

Audio To Matrix -

 

 

 

15

6

Audio From Matrix +

 

 

 

40

6

Audio From Matrix -

 

 

 

 

 

 

2

7

Data +

 

 

 

27

7

Data -

 

 

 

12

7

Audio To Matrix +

 

 

 

37

7

Audio To Matrix -

 

 

 

13

7

Audio From Matrix +

 

 

 

38

7

Audio From Matrix -

 

 

 

 

 

 

1

8

Data +

 

 

 

26

8

Data -

 

 

 

10

8

Audio To Matrix +

 

 

 

35

8

Audio To Matrix -

 

 

 

MDR Connector

Pin Number

Port

Function

 

 

 

11

8

Audio From Matrix +

 

 

 

36

8

Audio From Matrix -

 

 

 

NOTE: There are 6 MDR connectors on theXCP-48RJ-45Breakout panel.

MDR Connector

Port

 

 

J1

41-48

 

 

J2

33-40

 

 

J3

25-32

 

 

J4

17-24

 

 

J5

9-16

 

 

J6

1-8

 

 

4

Notes

5