RFG-1000
GPS Receiver
User Manual
RFG-1000 Ver1.5,
Jan/21/03’
1
Contents |
|
WHAT IS RFG-1000 ? ............................................................................................................. |
3 |
RFG-1000 ARCHITECTURE................................................................................................. |
3 |
WHAT IS INSIDE ? ................................................................................................................. |
4 |
WHAT IS GPS ? ....................................................................................................................... |
4 |
WHAT’S INSIDE THE PACKAGE? ..................................................................................... |
4 |
START-UP FOR RFG-1000( RS-232 & USB)? ..................................................................... |
6 |
START-UP FOR RFG-1000( PDA)? ...................................................................................... |
7 |
USB DRIVER INSTALLATION FOR WINDOWS OPERATION SYSTEM?................ |
8 |
USB DRIVER UN-INSTALLATION FOR WINDOWS OPERATION SYSTEM?......... |
9 |
ROYALTEK GPS DRIVER INSTALLATION( PC AND PDA VERSION) .................... |
10 |
ROYALTEK GPS DRIVER OPERATION(FOR PDA VERSION) .................................. |
11 |
ROYALTEK GPS DRIVER USER GUIDE(PC VERSION) ............................................. |
13 |
HOW TO TEST RFG-1000(PDA VERSION ONLY) ......................................................... |
15 |
HOW TO TEST RFG-1000(PC VERSION ONLY)............................................................ |
17 |
ROYALTEK GPS DRIVER UN-INSTALLATION (FOR PDA VERSION).................... |
18 |
ROYALTEK GPS DRIVER UN-INSTALLATION (FOR PC VERSION) ...................... |
18 |
SPECIFICATIONS ................................................................................................................ |
19 |
SOFTWARE DATA................................................................................................................ |
21 |
TROUBLESHOOTING......................................................................................................... |
25 |
APPENDIX : CONNECTOR INTERFACE........................................................................ |
26 |
LIMITED WARRANTY........................................................................................................ |
27 |
2
What is RFG-1000 ?
RFG-1000 introduces a First GPS module in G-mouse type.
The RFG-1000 provides a GPS measurement platform that performs the processor-intensive GPS tracking and processing tasks and FirstGPS software. It enables the host CPU–based software to calculate the actual position, velocity and time (PVT) solutions at its own pace, without burdening the other applications running on the device.
RFG-1000 Architecture
RFG-1000
ROYALTEK GPS
DRIVER
NMEA Output
GPS port
Navigation Program
3
What Is Inside ?
Before you start up, make sure that your package includes the following items. If any items are missing or damaged, contact RoyalTek immediately. Please refer to the contact information on the last page of this manual.
GPS Receiver Cable(RS-232 , USB, or PDA adaptor)
RFG-1000 install CD Disc
What Is GPS ?
In 1974 the USA Department of Defense set about developing a Global Positioning System (GPS), a constellation of 24 satellites that Orbits 12,000 miles above the Earth. Using triangulation of signals from four of the satellites, a receiving unit on earth can pinpoint its current location to within a few meters. A GPS device receive the data, then convert the longitude, latitude, and altitude (LLA) data into a location point. Position and navigation information is vital to a wide range of professional and recreational activities covering surveying, search and rescue, tracking, hiking, navigating, and so forth.
What’s Inside the Package?
Before you start up, make sure your package includes the following items. If any item is missing or damaged, contact your dealer immediately. Please refer to the contact information on the last page of this manual.
GPS Receiver Application CD
Cable for RS232 , USB , or PDA adaptor(depending on what you buy)
4
RFG-1000
IPAQ 36xx/37xx/38xx Series
HP Jornada 565
RS-232/PS2 USB
Car cigarette adaptor 12V
5
Start-Up for RFG-1000( RS-232 & USB)?
Getting Started
Step 1: Plug-in RS-232 or USB cable to your laptop or desktop PC.
Step 2:Install USB driver if you use USB cable to connect RFG-1000 to your PC.(for detail , please go to USB driver installation for Windows Operation System)
PS2
RS-232
Step 3:Install & run RoyalTek GPS Driver program.(for detail, please refer
RoyalTek GPS Driver installation and RoyalTek GPS Driver operation )
Step 4:Choose the correct COM port and baud rate (4800bps) for map or navigation
software.
Notice:
(1)For safety reason, please do not install RFG-1000 while driving.
(2)The formats of NMEA messages are illustrated on Software Data section.
(3)It is strongly recommend that user doesn’t plug and unplug this connector frequently.
6
Start-Up for RFG-1000( PDA)?
Getting Started
Step 1: Plug-in PDA connector to your PDA.
Step 2: Connect the car cigarette adaptor to your car.
Step 3 Run RoyalTek GPS Driver program.(for detail, please refer RoyalTek GPS Driver installation and RoyalTek GPS Driver operation )
Step 4:Choose the correct COM port and baud rate (4800bps) for map or navigation software.
7
USB Driver Installation for Windows Operation System?
Getting Started
Step 1:Plug USB connector to USB port of your laptop or desktop PC.
Step 2: After plugging in RFG-1000, it will automatically detect hardware .
Step 3: Insert RFG-1000 CD, system will automatically search and find the correct USB driver.
Caution: During USB driver installation, a message box “Driver is not certificated by Microsoft” may pop-up. Please crick “Continue” to continue the USB driver installation.
Step 4:Please go to Control Panel>System>Universal Serial Bus Controllers to check USB driver is successfully installed or not!
Step5. You can check COM port number of RFG-1000 from System properties now. The default COM port is COM3 in this example.
8
Step 6:Place RFG-1000 on the roof of your vehicle with magnetic base.
Step 7:Choose the correct COM port and baud rate (4800bps) for map or navigation software.
Caution: Sometimes, USB driver can’t work properly after recovering from power-saving mode. To solve this problem, please restart your PC and disable power-saving function.
USB Driver Un-Installation for Windows Operation System?
To completely remove the USB-driver , please run “DRemover98_2K.exe” in RFG-1000 CD.
9
Loading...