Owner's Manual
RBC-1003BK
BILL counter
With UV, IR and Magnetic Counterfeit Detection
Página en Español |
13 |
Page en Français |
25 |
Please read and retain these instructions
To register your product, please go to
www.royalsovereign.com -customer supportregistration.
www.royalsovereign.com
Royal Sovereign International, Inc.
Bill counter
With UV, IR and Magnetic Counterfeit Detection
RBC-1003BK
SAFETY INSTRUCTIONS
Warning
When using this machine follow these basic safety precautions to reduce risk of fire, electric shock or injury.
Do not place the machine in area where it may be exposed to water or other liquids.
Before cleaning the machine always unplug the machine from the wall. Do not use liquid or aerosol cleaners on the machine.
To reduce the risk of electrical shock, do not take apart the machine. When service or repair work is needed bring it to a qualified service repair technician.
Only use the power cord that comes with the machine. Using a different power cord may result in electric shock, fire or cause serious damage to machine.
Do not use the machine in areas with high temperature or high humidity. This may result in the machine not working properly.
Caution
When unplugging the power plug, grip the plug to pull it out. Pulling the cord may result in electric shock, fire or damage to the machine.
Do not use the machine if the power cord is damaged. This may result in electric shock, fire or other hazards.
Do not place objects on the power cord and do not bend it excessively. This may result in electric shock, fire or other hazards.
When not using the machine for long periods of time, unplug the power cord from the outlet.
3
CONTENTS
Box Contents∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5
Parts∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5
Controls∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6
Features∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7
Operation∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9~10
Error Code Displays∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11
Specifications∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11
Warranty∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12
Contact Information∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12
Página en Español∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 13 Page en Français∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 25
4
BOX CONTENTS
Bill Counter, Power Cord, Cleaning Brush
PARTS
RBC-1003BK
adjustable bill guides
hopper control panel
bill-receiving vanes
stacker
bill thickness adjuster
handle
power switch power socket
fuse
5
CONTROLS
Count display |
|
|
|
|
|
|
|
Key pad |
MG sensitivity level adjuster |
|
|
|
|
|
|
|
Clear |
Preset display |
|
|
|
|
|
|
|
Batch mode |
LEVEL |
L |
M |
G |
7 |
8 |
9 |
0 |
BATCH |
|
|
|
|
|||||
|
|
|
|
4 |
5 |
6 |
C |
|
|
|
|
|
1 |
2 |
3 |
SET |
RESTART |
|
|
|
|
|
||||
MNL |
ADD |
DD |
MG |
UV |
|
|
|
|
Manual start mode |
|
|
|
|
|
|
|
|
ADD mode |
|
|
|
|
|
|
|
Restart |
Dimension counterfeit detection |
|
|
|
|
|
|
|
Set |
Magnetic counterfeit detection |
|
|
|
|
|
|
|
Ultraviolet counterfeit |
|
|
|
|
|
|
|
|
detection |
6
RBC-1003BK
FEATURES
Front Loading
The sophisticated front loading system provides easy access to hopper, allows larger hopper capacity, and is more durable than a back loading system.
Automatic Self-Test
The machine will automatically perform a self-test when it is turned on. If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAYS.)
Auto and Manual Start Modes
The machine is preset to automatically start counting bills once placed into the hopper. To change to the manual start mode, press MNL, insert the bills into the hopper, and press RESTART.
UV Counterfeit Detection
Counterfeit bills often use white or bleached paper, which will glow under ultraviolet light. To use ultraviolet counterfeit detection, press UV. When the UV detector finds a counterfeit bill, the machine will stop counting to allow removal of the counterfeit bill and display the error code on the preset display. To resume counting, simply press RESTART.
Magnetic Counterfeit Detection
If the magnetic detector does not find the presence of magnetic components that are standard in authentic bills, the machine will stop counting to allow removal of the counterfeit bill and display the error code on the preset display. To use magnetic counterfeit detection, press MG. To adjust magnetic sensitivity level, press LEVEL for low, medium, and high. To resume counting, simply press RESTART.
Dimension Detection
The dimension detector measures the width of the center of each bill by using infrared light. If the detector finds an oddsized bill, the machine will stop counting to allow removal of the bill and display the error code on the preset display. To use dimension counterfeit detection, press DD. The dimension (DD) counterfeit detection sensitivity level is preset on level 1 (highest level).To adjust width sensitivity level, press SET and select 1-5, 1 for highest, 5 for lowest.
To adjust width sensitivity level, press SET and select 1-5, 1 for lowest, 5 for highest.
7
Common and Batch Counting Modes
The machine is preset to common counting mode, which automatically counts all bills placed into the hopper. To count bills in batches, press BATCH. Batching is preset to 100 bills. To change batch amount, press C to clear, and use the keypad to enter a batch number between 1 and 999. Press SET to save the setting.
Add Mode
The ADD mode displays cumulative total of all bills counted. To turn ADD mode on, press ADD.
Memory Settings
The machine will save counterfeit detection and counting mode settings when power is turned off and on.
The machine will save counterfeit detection settings, manual, and add mode settings when power is turned off and on.
Bill Counting Mode
This machine is preset to stop counting when a counterfeit or irregular bill is detected and include these bills in the master count (shown on the count display). This preset setting is type 2, which can be accessed by pressing SET twice (preset display will show “F” and count display will show “2”). This setting is ideal for a user who does not require counterfeit detection and is sitting nearby to push RESTART as necessary.
This preset counting mode may be changed to:
1.not count counterfeit or irregular bills and stop counting to allow removal of bill(s) in question, and allow re-insertion of all bills into hopper to restart counting from zero. To set counting mode to this type, press SET twice. Preset display will show “F”. Use the keypad to select “1”, then press SET to save the setting. This setting is ideal for a user who requires counterfeit bills be excluded from the master count.
2.count counterfeit or irregular bills and continue counting, unless there is a jam error (either EA2, two or more bills
counted as one, or EA3, part of one bill overlapping another bill), in which case the count may be inaccurate. In this case, bill(s) in question are counted, and the machine will stop to allow re-insertion of all bills into hopper to restart counting from zero. To set counting mode to this type, press SET twice. Preset display will show “F”. Use the keypad to select “3”, then press SET to save the setting. This setting is ideal for a user who does not require counterfeit detection and is requires fully automated, hands-free counting.
8
RBC-1003BK
OPERATION
1.Plug in power cable and turn power switch on.
2.Select counterfeit detection mode.
To use ultraviolet (UV), magnetic (MG), and/or dimension (DD) counterfeit detection while counting, press the corresponding buttons on the control panel.
The dimension (DD) counterfeit detection sensitivity level is preset on level 1 (highest level). To adjust the sensitivity level, press SET. Preset display window will display “SE”. Use the keypad to select a level from 1-5, 1-highest, 5-lowest. Press SET to store the setting.
3.Select bill counting settings.
Bill Counting Mode
The bill counting mode is preset on type 2. To adjust the counting mode, press SET twice. Preset display window will display “F”. Use the keypad to select a type 1-3. Type 1 will not count counterfeit or irregular bills and stop counting to allow removal of bill(s) in question, and allow re-insertion of all bills into hopper to restart counting from zero. Type 2 will stop counting when a counterfeit or irregular bill is detected and include these bills in the master count (shown on the count display). Type 3 will count counterfeit or irregular bills and continue counting, unless there is a jam error (either EA2, two or more bills counted as one, or EA3, part of one bill overlapping another bill), in which case the count may be inaccurate. In this case, bill(s) in question are counted, and the machine will stop to allow re-insertion of all bills into hopper to restart counting from zero.
Add Mode
To continuously add totals for a cumulative total when counting several batches of bills, press ADD. The ADD indicator light will turn on.
Batching Mode
The machine is preset to common counting mode, which automatically counts all bills placed into the hopper. To count bills in batches, press BATCH. Batching is preset to 100 bills. To change batch amount, press C to clear, and use the keypad to enter a batch number between 1 and 999. Press set to save the setting.
Auto/Manual Start Modes
The machine is preset to automatically start counting bills once placed into the hopper. To change to the manual start mode, press MNL, insert the bills into the hopper, and press RESTART.
9
4. Test Run
Test the machine to set it to count your currency. Prepare at least five bills to test the machine. Place the bills on the hopper and run the machine. If the machine counts the bills and there are no errors, it is ready to accept your currency.
If:
1.The bills are deformed
2.The machine is considerably slow
3.Error message is lit frequently
The hopper tension is too tight. To loosen this tension, please turn the Bill Thickness Adjuster one notch to the right (+). Place the bills back into the hopper to test the machine again. If errors occur, adjust as necessary.
If:
1.The bills are flying out
2.The display shows a miscount
3.Error message is lit frequently
The hopper tension is too loose. To tighten this tension, please turn the Bill Thickness Adjuster one notch to the left (-). Place he bills back into the hopper to test the machine again. If errors occur, adjust as necessary.
When the machine is running without any errors, it is ready to accept your currency.
5. Insert bills into the hopper to begin counting.
10
RBC-1003BK
Error Code Display
When an error code appears in the preset display window and the machine stops, please refer to the following chart for an explanation.
Error code |
Reason |
|
E01 |
Left counting sensor |
|
E02 |
Right counting sensor |
|
E03 |
Left double-notes sensor |
|
E04 |
Right double-notes sensor |
|
E05 |
Note-receiving sensor |
|
E06 |
Note-feeding sensor |
|
E07 |
Width sensor |
|
E08 |
UV sensor |
|
EA0 |
Half sheet. Eliminate the note. Press RESTART and count continuously. |
|
EA1 |
Different width or different version notes. Press RESTART and count continuously. |
|
EA2 |
Double-notes. Put the notes from the stacker onto the hopper again, press RESTART to count |
|
again. If EA2 often appears, please adjust the position of the bill thickness adjuster. |
||
|
||
EA3 |
Joined notes. Put the notes from the stacker onto the hopper again, press RESTART to count again. |
|
EC4 |
UV Fake note or questionable note. Eliminate this note, press RESTART and count continuously. |
If you are receiving error codes E01-E08 check the machine for dust. If you continue to receive error codes, please contact Royal Sovereign’s Service Center at 1-800-397-1025.
SPECIFICATIONS
Model |
RBC-1003BK |
Power |
single-phase 100~240V 50/60Hz(1±5%) |
Power consumption |
<50W |
Surroundings temperature of usage |
32~104°F / 0~40°C |
Counting speed |
1200pcs/min. |
Note-feeding size |
4.3˝× 2.0˝~9.8˝×7.7˝/110×50~185×90(mm) |
Display range |
four digits counting display, three digits preset display |
Cubage |
10.6˝× 9.8”˝× 7.7”/270×250×195(mm) |
Net Weight |
10.1 lbs / 4.6kg |
11