Radio Shack Projection 12-591 User Manual

Size:
560.24 Kb
Download

12-591User’s Guide

Daytime/Nighttime • Atomic-Controlled

Projection Clock Radio

Thank you for purchasing your Projection Clock Radio from RadioShack. Please read this user’s guide before installing, setting up, and using your new Projection Clock Radio.

Contents

 

Important Safety Instructions..............................................................................

3

Package contents ..........................................................................................................

5

Features.........................................................................................................................

5

Setup...................................................................................................................

6

Power Your Radio...........................................................................................................

6

Setting Time.................................................................................................................

10

Setting Alarms..............................................................................................................

11

Using the alarm........................................................................................................

11

Operation..........................................................................................................

12

Tune to a Frequency....................................................................................................

12

Preset Memory.............................................................................................................

12

Find a Preset Station................................................................................................

13

Sleep Timer..................................................................................................................

13

Connecting Auxiliary Audio Equipment......................................................................

13

Using the Projector......................................................................................................

14

Additional Information......................................................................................

15

Specifications...............................................................................................................

15

FCC Information...........................................................................................................

16

Limited Warranty..........................................................................................................

17

 

CAUTION

 

of fire or shock hazard, do not

 

 

 

!

WARNING: To reduce the risk

RISK OF ELECTRIC SHOCK

expose this product to rain or

 

DO NOT OPEN

 

moisture.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK. NOUSER-SERVICEABLEPARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

The lightning symbol is intended to alert you to the presence of uninsulated, dangerous voltage within this product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.

The exclamation symbol is intended to inform you that important

! operating and maintenance instructions are included in the literature accompanying this product.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Unplug this product from the wall outlet before cleaning. Do not liquid cleaners or aerosol cleaners. Clean only with dry cloth.

6.Do not use this product near water. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

7.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

8.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

9.Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect if from overheating. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

10. This product is equipped with a polarized AC line plug (a plug having one blade wider than the other).

This plug will fit in the power outlet only one way. This is a safety feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug still doesn’t fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If you need an extension cord, use a polarized cord.

11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

12. The mains plug of the apparatus should not be obstructed OR should be easily accessed during intended use.

13. To completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Only use attachments/accessories specified by the manufacturer.

15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supplycord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

16. The rating plate is located on the bottom of the apparatus.

Package contents

Radio

User’s Guide

Quick Start

Features

Projects time on the ceiling or wall

Automatically adjusts the brightness of the beam based on ambient lighting conditions

Time synchronizes with the U.S. government’s atomic clock, sets itself, and stays accurate

Dual alarms with snooze function

AM/FM radio with six memory presets

Setup

Setup

Setup

Power Your Radio

Connect the AC plug to a standard wall outlet.

Install batteries for backup power. In the event of a power interruption, the backup batteries will retain your radio presets, the clock and alarm times in the memory only (normal clock, display and radio operation excluded):

1.Remove the battery cover.

2.Insert 2 AAA batteries (not supplied) matching the polarity symbols (+ and –)marked inside.

3.Replace the battery cover.

bBattery Notes:

Dispose of batteries promptly and properly. Do not burn or bury them.

Do not expose batteries to excessive sunlight, fire or heat.

Use only fresh batteries of the required size and type.

Do not mix old and new batteries, different types of batteries (alkaline, or rechargeable), or rechargeable batteries of different capacities.

A AA

A A A

Image Rotate

Adjust the projection angle.

TIME ZONE

Select your time zone.

Projection Focus

Adjust the image focus.

PROJECTOR HI/MED/ AUTO/OFF

Turn projector on/off

Select brightness level

DST AUTO/OFF

Turn daylight savings on/off.

LOCK TIME/DATE

Slide to TIME/DATE to set time manually. Slide to LOCK to save.

12/24

Select 12 or 24 hour format.

RESET

Restore to factory settings and clear all time and radio presets.

Setup

Setup

Light sensor

Helps to detect light levels to automatically adjust projector brightness. See page 14,

Using the projector.

M 1/ M2

Turn on or stop alarm 1 or alarm 2.

WAVE

Hold down about 10 seconds to turn on/off the atomic clock function. Press to search for the atomic clock signal, e flashes.

SET

Set time and alarm.



Change settings.

+ VOLUME –

Adjust volume.

SNOOZE/LIGHT

Stop the alarm for 10 minutes when the alarm sounds.

Briefly turn on the backlight /projector image.

Press and hold for 3 seconds to change backlight brightness level.

G

Turn on/off the radio.

FM/AM/AUX

Select the desired frequency.

SLEEP

Select a sleep timer in 60, 30, 15 minute increments.

MEMORY

Hold down to store frequencies.

Press to recall the saved frequencies.

AUX” (3.5mm) jack

Connect auxiliary audio equipment.

Setup

Setup

If you do not plan to use the radio for a long time, remove the batteries. Batteries can leak chemicals that can damage electronic parts.

Setting Time

Your clock attempts to synchronize with the atomic time signal automatically when you first turn it on and whenever you press RESET. The reception icon e flashes while it is searching for a signal.

After your clock displays the time, set the TIME ZONE switch to the local zone (Eastern, Central, Mountain, or Pacific).

If the clock does not find the atomic time signal or when you are out of

 

the local zone, set the time manually:

RESET

 

1.Slide LOCK TIME/DATE to TIME/DATE.

2.The current time flashes. Press orto select the time or hold downorto quick search in 10 minute increments.

3.Press SET to confirm and enter calendar mode. The month flashes.

4.Press orto select the month.

5.Press SET. The day flashes.

6.Press orto select the date.

10