Radio Shack PLRDVD7 User Manual

Size:
207.4 Kb
Download

PLRDVD7

OWNER’S MANUAL

Mobile Video System

Digital Audio Out-Coaxial

DVD Player

Multi Color TFT Monitor

Multi-subtitleLanguages Function

Multi-audioLanguages Function

Multi-angleFunction

Parental Control

Remote Control

www.pyleaudio.com

FEATURES

Compatible with PAL DVD (Video CD) and NTSC DVD (Video CD)

This player can play discs recorded in either PAL or NTSC format.

A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder, video D/A converter, and audio decoders.

L/R stereo analog audio outputs for connection to existing head unit aux inputs. Video output is composite video.

Supplied remote handles multi-functionsoftware(multi-languageaudio-track/subtitle,multi-angle,multistory, etc.), plus all basic functions.

USE THIS PRODUCT SAFELY

When Driving

Keep the volume level low enough to be aware of road and traffic conditions.

When Car Washing

Do not expose the product to water or excessive moisture. This could cause electrical shorts, fire or other damage.

When Parked

Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC, negative ground battery system (the regular system in a North American car).

Protect the Disc Mechanism

Avoid inserting any foreign objects into the slot of this player.

Failure to observe this may cause malfunction due to the precise mechanism of this unit.

Use Authorized Service Centres

Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance.

For Installation

The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°.

2

CONTENTS

 

Safety Information ........................................................................................

4

Disc Notes .....................................................................................................

5

The Player ......................................................................................................

6

Installation .....................................................................................................

8

Replacing the Car Demo Lamp ...................................................................

9

Electric Connection ....................................................................................

10

Remote Control...........................................................................................

11

Location and Function of Keys.............................................................................

11

Preparing the Remote Control ..............................................................................

13

Loading/Ejecting a disc..............................................................................

13

Loading a Disc ......................................................................................................

13

Ejecting a Disc ......................................................................................................

13

Operation .....................................................................................................

14

Basic Play .............................................................................................................

14

Menu Function ......................................................................................................

16

On-ScreenDisplay Function.................................................................................

16

Multi-audioLanguage Function............................................................................

17

Title Menu Function ..............................................................................................

18

Multi-SubtitleLanguage Function ........................................................................

18

Multi-angleFunction .............................................................................................

18

MP3 Disc Play.......................................................................................................

18

Setup ............................................................................................................

19

Initial Setup ...........................................................................................................

19

General Setup .......................................................................................................

19

Speaker Setup ......................................................................................................

21

Audio Setup ..........................................................................................................

21

Preferences Setup ................................................................................................

22

Defaults Table .......................................................................................................

24

Trouble Shooting.........................................................................................

25

Specifications..............................................................................................

26

3

SAFETY INFORMATION

CAUTION:

MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Region Management Information

Region Management Information:

This Mobile DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this Mobile DVD Player, this Mobile DVD Player cannot play this disc.

4

DISC NOTES

Disc formats supported by this player

DVD

12 cm disc (Single-sideddisc only)

Video CD

12 cm disc

CD

12 cm disc

MP3

12 cm disc

Discs which cannot be played with this player

DVD-ROM

DVD-R/DVD-RAM

CDV

CD-G

Handling and Cleaning

Dirt, dust, scratches and warping disc will cause misoperation.

Do not place stickers or make scratches on discs.

Do not warp discs.

A disc should always be kept in its case when not in use to prevent from damaging.

Do not place discs in the following places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Disc Cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Note:

A disc may become somewhat scratched (although not enough to make it unusable) depending on your handle it and conditions in the usage environment.

Note these scratches are not an indication of any problem with the player.

Label side up

Do not touch the underside of the disc

Do not bend

Wipe the disc from center toward the outside edge

Preparing New Discs with Rough Spots

A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown below. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc.

Rough spots on outside edge

Ball point pen or pencil

Rough spots on inside edge

5

THE PLAYER

5

3

8

1

4

10 20

11

9

2

7

6

5

22

14

14

15

15

16

17

18 19

6

THE PLAYER

12

13

 

 

 

7 INCH TFT COLOR MONITOR

1.

POWER (

)

15.

Jacks for Earphone

2.

EJECT (

 

)

16.

DC 12V IN

3.

MENU

 

17.

AV IN

4.

MOD

 

18.

AV OUT

5.

Car Dome Lamp

19.

DIGITAL AUDIO

6.

Light Switch

20.

INFRARED TRANSMITTING

7.

VOLUME +

 

WINDOW (For the unit with infrared

8.

VOLUME -

 

transmitting function only)

9.

IR

 

21.

Open button: Press the button to

10.

Indicator Light for DVD

 

eject the screen display from the base

11.

Indicator Light for AV

 

at a little angle.

12.Disc slot

13.7 inch TFT Color Monitor

14.Earphone volume control knob

7

INSTALLATION

Fig. 1

Mounting Bracket

Levers

Tapping Screws (ø4x10)

Slots

DVD Bracket

Mounting Bolts (M3.5x10)

Rubber Caps

Fig. 2

1.Determine the mounting location and drill four mounting holes (See Fig.1).

2.Attach the mounting bracket to the holes with the tapping screws (ø4x10).

3.Let the two levers aim at the slots on the DVD bracket to fix the display unit.

4.Open the monitor to display the five screw holes.

5.Attach the unit to the bracket with the mounting bolts (M 3.5x10).

6.Insert five rubber caps to the screw holes.

7.When the installation has completed, you can also turn the display upward or downward, left or right to adjust the viewing angle. (See the arrowhead symbol in Fig.2).

8

Lamp Cover

REPLACING THE CAR DOME LAMP

Follow the directions shown below for a new lamp changing.

1. Press the open button to eject the screen display and turn it upward. 2. Position light switch to “OFF”.

3. Push back the lamp cover and open it. (Refer to the following figure) 4. Remove and discard the old lamp.

5. Install a new bulb.

6. Close the cover.

Bulb

Light Switch

Bulb Specification

Diameter: ø8mm

Length: 28mm

Voltage Spec.: DC12V, 5W

CAR DOME LAMP WIRING

Line for Car Dome Lamp

Note:

Color

Connection

 

 

Red

Power Supply

 

 

White

Interior Light System

Black

Ground

9

LIGHTER CIGARETTE

IN 12V DC

CONNECTION ELECTRIC

10

VIDEO IN

YELLOW

AUDIO L IN

WHITE

AUDIO R IN

RED

VIDEO OUT

YELLOW

AUDIO L OUT

WHITE

AUDIO R OUT

RED

DIGITAL AUDIO