Radio Shack 63-987 User Manual

Size:
108.94 Kb
Download

#VQOKE"2TQLGEVKQP"%NQEM

63-987 OWNER’S MANUAL — Please read before using this equipment.

Your RadioShack Atomic Projection Clock

2. Place the batteries in the compartment

$#5+%"12'4#6+10

combines a simple design with advanced

as indicated by the polarity symbols (+

 

 

 

 

((SNOOZE))

 

 

 

 

technology. You can set the clock to project

and –)marked inside.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the current time on a wall or the ceiling for

3. Replace the cover.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

easy nighttime viewing.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can also set the clock to automatically

When the display dims, the clock stops

 

 

 

 

 

 

 

 

 

 

 

 

 

 

operating properly, or ô (low battery icon)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

set the time and date, using a 60 kHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appears, replace the batteries.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

longwave radio signal from radio station

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WWVB. The clock checks the radio signal

Warning: Dispose of old batteries promptly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

several times each day and automatically

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and properly. Do not burn or bury them.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

updates the time and date, providing the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

most accurate time possible. Or, if you are

Caution: If you do not plan to use the clock

 

 

 

 

 

 

 

 

 

 

 

 

 

 

unable to receive the time-settingsignal, you

with batteries for a month or more, remove

 

 

 

 

 

 

 

 

 

 

 

 

 

 

can set the clock manually.

the batteries. Batteries can leak chemicals

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Large Liquid Crystal Display — makes the

that can destroy electronic parts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

clock easy to read. The current time and

Note: Installing batteries resets the clock.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

alarm time, the time zone you are in, and the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

date and day of the week appear on the

75+0)"#%"219'4

 

 

 

 

8 9

 

ALARM

ZONE

display.

 

CLOCK

 

 

 

 

Adjustable Projector —

lets you project the

You can save battery power by using the

As soon as you install the batteries, all

time on a wall or ceiling, rotate the image to

supplied 3V, 200 mA AC adapter to power

display segments briefly appear. 7Cý'(0&&,

the desired angle, and focus the image for

the projector. Be sure to install batteries to

the seconds, 'Cý': (January 1), and the

clarity.

 

power the clock, as the AC adapter does not

current indoor temperature appear.

 

Three Languages — lets you review the day

power the clock.

For about 3 minutes after you connect power,

Cautions:

 

of the week in English, French, or Spanish.

 

the clock scans for a radio signal and ÷

Display Backlight — lets you see all the

 

You must use a Class 2 power

flashes. When the clock receives a strong

!

signal, it automatically sets the time and date.

information on the screen, even in the dark.

source that supplies 3V DC

The clock checks the radio signal six times a

 

 

and delivers at least 200 mA.

Indoor Thermometer —

lets you monitor the

 

day, at about 2:00 AM, 3:00 AM, 4:00 AM,

Its center tip must be set to positive and

9:00 AM, 3:00 PM, and 9:00 PM (as shown

room’s temperature.

 

its plug must fit the clock's DC 3V jack.

 

on the clock).

 

 

 

 

 

 

The supplied adapter meets these

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+056#..+0)"

 

specifications. Using an adapter that

Notes:

 

 

 

 

 

 

 

 

 

 

 

does not meet these specifications could

 

 

 

 

 

 

 

 

 

 

 

 

 

 

$#66'4+'5

 

damage the clock or the adapter.

• On very cloudy and stormy days, the

 

 

signal might not be strong enough to

Your clock requires 2 AA batteries (not

• Always connect the AC adapter to the

 

 

reset the clock. If the clock does not

clock before you connect it to AC power.

 

supplied) for power. For the best

 

receive a strong radio signal, you can set

When you finish, disconnect the adapter

 

performance and longest life, we recommend

 

the time and date manually. (See

from AC power before you disconnect it

 

RadioShack alkaline batteries.

 

“Manually Setting the Time, Date, and

from the clock.

 

 

 

 

Language” on Page 2.)

 

Cautions:

 

 

 

 

 

 

1. Plug the AC adapter’s tip into the clock’s

• If the clock does not receive a strong

 

 

 

 

DC 3V jack (in the recess on the bottom

• Use only fresh batteries of the required

 

signal within about 2 minutes, it stops

of the clock).

 

size and recommended type.

 

scanning and looks for a signal again at

 

 

 

• Do not mix old and new batteries,

2. Route the adapter’s cord through the slot

 

the next preprogrammed time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

different types of batteries (standard,

marked DC 3V on the back of the clock.

The time zone F (Pacific),C (Mountain),9

alkaline, or rechargeable), or

3. Plug the AC adapter’s other end into a

(Central), or ; (Eastern) appears in the map

rechargeable batteries of different

on the right of the screen. While the clock is

standard AC outlet.

capacities.

 

scanning for a signal, repeatedly press ZONE

 

 

 

1. Place your finger in the recess above the

until the desired time zone is highlighted.

 

battery compartment cover and lift off the

Your clock measures and displays the indoor

cover.

temperature between 23° and 122°F (–5°to

 

 

50°C). If the temperature goes above or

© 2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.

below that range, the highest or lowest temperature flashes.

To change the display language, see “Manually Setting the Time, Date, and Language” on Page 2.

To display either the seconds or the day of the week, press CLOCK.

To view the time in another time zone, press ZONE until the desired time zone is highlighted.

%*'%-+0)"6*'"5+)0#."56#675

The clock displays these symbols to indicate the current or last status of radio signal reception.

5[ODQN

&GUETKRVKQP

 

 

øý

The clock received a radio signal

strong enough to set the date and time

 

within the last 72 hours.

 

 

 

The clock has not received a radio

 

signal strong enough to set the date

 

and time within the last 72 hours.

öý

Reposition the clock before the

 

designated signal check time, or set

 

the date and time manually.

 

Or, the displayed time has been

 

manually set.

No

Automatic time setting is turned off.

Hold down 8until÷ appears, or

Indicator

 

reset the clock.

-

The clock is receiving the radio signal

and the time/date sets shortly.

ùý

The clock is receiving a signal, but

reception is not strong enough to set

 

the clock.

 

 

/#07#..;"5'66+0)"6*'" 6+/'."&#6'."#0&".#0)7#)'

Important: A strong radio signal overrides the manual setting. If you do not want this to happen, hold downZONE until the time icon disappears to turn off the automatic time setting. To turn the automatic time setting back on, hold down8 for about 2 seconds until ÷ appears, or reset the clock.

Note: If you do not press a button for about 1 minute, the clock returns to the currently set time display.

1.Repeatedly press ZONE to select the desired time zone.

2.Hold down CLOCK until the hour digits flash.

3.Repeatedly press (or hold down) 8 or9to select the desired hour setting.7C orFC appears.

4.Press CLOCK. The minutes digits flash.

5.Repeat Steps 3 and 4 to set the minutes, year, month, date, and language.

6.Press CLOCK to store your setting. Then repeatedly pressCLOCK to select the weekday or second display.

4'5'66+0)"6*'"%.1%-

Press RESET on the back of the clock with a pointed object such as a straightened paper clip to reset the clock. All display segments briefly appear, then the clock scans for a radio signal.

75+0)"6*'" 241,'%6+10".+)*6

You can use the clock’s projection light to project the time on a wall or ceiling.

Projection

RESET

Light

IMAGE

Battery

ROTATION

Compartment

Cover

FOCUS

DC 3V

Adapter

 

Cord Slot

180°

PROJECTION

ROTATION

LIGHT ON

To project the time, place the clock at least 18 inches from the desired surface and adjust the projection arm to the desired angle. Then slide PROJECTION LIGHT ON on the back of the clock in the direction of the arrow to turn on the light.

Caution: The projection arm moves about 90 degrees in either direction. Do not force it further.

Note: PROJECTION LIGHT ON only operates when the clock is connected to AC power.

To focus the image, adjust FOCUS on the side of the projection arm.

To rotate the image, turn IMAGE ROTATION on the back of the clock.

To flip the image 180° ,press 180° ROTATION .

To turn off the projection light, slide

PROJECTION LIGHT ON toward the projection arm.

With the projection light off (or when powering the clock using batteries only), you can project the time by pressing SNOOZE. The projector lights for about 5 seconds then automatically turns off.

75+0)"6*'"#.#4/

5'66+0)"6*'"#.#4/"6+/'

Note: If you do not press a button for about 30 seconds, the clock exits the alarm setup mode. Start over at Step 1.

1.Hold down ALARM until the alarm hour flashes. é (alarm on) and û (alarm time) appear.

2.Repeatedly press or hold down 8 or 9 to select the alarm hour.

3.Press ALARM. The alarm minutes flash.

4.Repeatedly press or hold down 8 or 9 to select the alarm minutes.

5.Press ALARM to store the alarm setting. The alarm time remains on the display.

To view the alarm display at any time, press ALARM. To return to the calendar display, pressCLOCK.

6740+0)"6*'"#.#4/"101 1((

1.Press ALARM to turn on the alarm. éý appears.

At the preset alarm time, é flashes on the display and the alarm beeps softly every 2 seconds.

If you do not silence the alarm, after 20 seconds, two quick beeps sound every 2 seconds and the alarm volume increases. After 20 more seconds, three quick beeps sound every 2 seconds and the volume increases to its maximum level. After another 20 seconds, the alarm beeps continuously (about four beeps per second) for about 1 minute.

After 2 minutes, the alarm turns off automatically. The first time this

happens, the snooze feature activates and é continues flashing. In about 8 minutes, the alarm sounds again. If the

alarm turns off automatically a second time, é remains on the display and the alarm sounds again the next day at the set alarm time.

2

2.Press ALARM to turn off the alarm. é disappears.

75+0)"5011<'

When the alarm sounds, press SNOOZE to silence the alarm for about 8 minutes. é flashes. After 8 minutes, the alarm sounds again.

%#4'

Keep the clock dry; if it gets wet, wipe it dry immediately. Use and store the clock only in normal temperature environments. Handle the clock carefully; do not drop it. Keep the clock away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the clock’s internal components can cause a malfunction and might invalidate its warranty. If your clock is not performing as it should, take it to your local RadioShack store for assistance.

52'%+(+%#6+105

Batteries ....................................

Two AA Batteries

AC Adapter ................................................

3V DC

Operating Temperature . 23° – 122°F (–5°– 50°C)

Snooze Time ...............................

About 8 minutes

Accuracy ..................................

± 0.5 Second/Day

Dimensions ......................

4.57 × 5.91× 1.65 inch

 

(116 × 150× 42mm)

Weight (without batteries) ...............

8.47oz (240g)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

Limited One-YearWarranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack com- pany-ownedstores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility;

(c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-upservice adjustment or reinstallation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

12/99

RadioShack Corporation

63-987

10A01

Fort Worth, Texas 76102

Printed in China