43-980.fm Page 1 Monday, August 16, 1999 4:44 PM
Cat. No. 43-980
OWNER’S MANUAL
Please read before using this equipment.
System 360
Caller ID with Callback
43-980.fm Page 2 Monday, August 16, 1999 4:44 PM
Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
|
CAUTION |
! |
|
|
|
|
RISK OF ELECTRIC SHOCK. |
|
|
|
|
|
DO NOT OPEN. |
|
|
|
|
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.
This symbol is intended to inform you that important oper-
!ating and maintenance instructions are included in the literature accompanying this product.
© 1997 Tandy Corporation.
All Rights Reserved.
RadioShack is a trademark used by Tandy Corporation.
2
43-980.fm Page 3 Monday, August 16, 1999 4:44 PM
FEATURES
Your RadioShack System 360 Caller ID with Callback is the latest in telephone technology. The system displays the caller’s telephone number (and name, if available in your area) and the current date and time, as provided by your local phone company to Caller ID service subscribers. The system’s callback feature lets you dial a caller’s number with the press of a single button.
The system stores and displays up to 64 single (number only) or multiple (name and number) Caller ID records.
Your System 360 includes these features:
VIP Call — lets you mark up to 32 stored names and phone numbers as important callers. Then, when those callers call, the system sounds a distinctive tone.
New Call Counter — displays the number of new calls you have received.
DELETE Button — lets you erase Caller ID records one at a time or all at once.
3
43-980.fm Page 4 Monday, August 16, 1999 4:44 PM
Time and Date Display — displays the current time and date as provided to Caller ID service subscribers by your local telephone company.
Message Waiting Indicator — appears when you have received a voice mail message (if you subscribe to the message waiting service from your local phone company).
Large Liquid Crystal Display — makes it easy to see caller information and the current time and date.
Contrast Control — lets you adjust the display’s contrast for your own particular preference.
REVIEW Buttons — let you easily scroll through all Caller ID records stored in memory.
Easy Installation — the system easily connects to your telephone line so you can quickly begin using it.
Mounting Options — you can place the system on a desk, shelf, or table, or mount it on a wall.
4
43-980.fm Page 5 Monday, August 16, 1999 4:44 PM
Note: You need four AAA batteries (not supplied) to power the System 360.
This system has been tested and found to comply with all applicable UL and FCC standards.
We recommend you record the system’s serial number here. The number is on the system’s bottom panel.
Serial Number: _________________________
Important Information:
•To use this system, you must be in an area where Caller ID service is available, and you must subscribe to the service.
•Your system displays the caller’s name only if this feature is available in your area and you subscribe to it.
5
43-980.fm Page 6 Monday, August 16, 1999 4:44 PM
FCC INFORMATION
We have designed your System 360 to conform to federal regulations, and you can connect it to most telephone lines. However, each Caller ID system (and each device, such as a telephone or answering machine) that you connect to the telephone line draws power from the line. We refer to this power draw as the system’s ringer equivalence number or REN. The REN is shown on the bottom of the system.
If you use more than one telephone or other device on the line, add up all of the RENs. If the total is more than five, your telephone might not ring. In rural areas, a total REN of three might impair ringer operation. If ringer operation is impaired, remove a device from the line.
Your system complies with Part 68 of FCC Rules. You must, upon request, provide the Federal Communications Commission (FCC) registration number and the REN to your telephone company. Both numbers are shown on the bottom of the system.
6
43-980.fm Page 7 Monday, August 16, 1999 4:44 PM
Note: You must not connect your System 360 to:
•Coin-operated systems
•Party-line systems
•Most electronic key telephone systems
In the unlikely event that your System 360 causes problems on the phone line, the phone company can temporarily disconnect your service. If this happens, the phone company attempts to notify you in advance. If advance notice is not practical, the phone company notifies you as soon as possible and advises you of your right to file a complaint with the FCC.
Also, the phone company can make changes to its lines, equipment, operations, or procedures that could affect the operation of this system. The phone company notifies you of these changes in advance, so you can take the necessary steps to prevent interruption of your telephone service.
7
43-980.fm Page 8 Monday, August 16, 1999 4:44 PM
This system complies with the limits for a Class B device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, your System 360 might cause TV or radio interference even when it is operating properly.
To eliminate interference, you can try one or more of the following:
•Reorient or relocate the radio or TV receiving antenna
•Increase the distance between the System 360 and the radio or TV
•Use outlets on different electrical circuits for the System 360 and the radio or TV
Contact your local RadioShack store if the problem continues.
8
43-980.fm Page 9 Monday, August 16, 1999 4:44 PM
CONTENTS |
|
Preparation ..................................................................... |
11 |
Installing Batteries/Setup .......................................... |
11 |
Adjusting the Display Contrast ................................. |
17 |
Connecting the System ............................................ |
18 |
Connecting to a Phone ..................................... |
18 |
Connecting to an Answering Machine .............. |
19 |
Mounting the System ............................................... |
20 |
Operation ....................................................................... |
22 |
Receiving Calls ........................................................ |
22 |
Reviewing Call Records ........................................... |
24 |
Displayed Call Information ................................ |
26 |
Deleting Call Records .............................................. |
28 |
Deleting a Single Call ....................................... |
28 |
Deleting All Calls .............................................. |
29 |
Using Callback ......................................................... |
29 |
Calling the Last Reviewed Number .................. |
31 |
Using VIP Calls ........................................................ |
31 |
Marking a Call Record as a VIP Call Record .... |
32 |
Unmarking a VIP Call Record ........................... |
33 |
|
9 |
43-980.fm Page 10 Monday, August 16, 1999 4:44 PM
Troubleshooting.............................................................. |
34 |
Care and Maintenance.................................................... |
35 |
Lightning .................................................................... |
37 |
10
43-980.fm Page 11 Monday, August 16, 1999 4:44 PM
PREPARATION
INSTALLING BATTERIES/SETUP
You need four AAA batteries (not supplied) to power the system. For the longest operation and best performance, we recommend alkaline batteries, such as RadioShack Cat. No.
23-558. |
(illustration) |
Cautions: |
|
•Always use fresh batteries of the required size and type.
•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
(illustration)
Follow these steps to install batteries and program the system.
Note: When replacing the batteries, install the new ones within 1 minute, or the system’s date and time will be lost. (The Caller ID information, however, stays stored in the system’s memory.)
11
43-980.fm Page 12 Monday, August 16, 1999 4:44 PM
1.If you are replacing the batteries, unplug the phone line and the phone’s cord from the system.
2.Use a Phillips screwdriver to remove the battery com-
partment screw on the bottom of the system, then slide the cover off in the direction of the arrow on the cover’s door.
3.Insert four fresh AAA batteries into the compartment as indicated by the polarity symbols (+ and –) marked inside the compartment.
(illustration)
(illustration)
12
Loading...