Radio Shack 21-549 User Manual

Size:
53.07 Kb
Download

%0$0"'ZVGPUKQP"5RGCMGT

21-549C

OWNER’S MANUAL — Please read before using this equipment.

 

 

Limited Ninety-DayWarranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-ownedstores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries;

(d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-upservice adjustment or reinstallation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

12/99

."%#76+10".

Avoid mounting in direct sunlight or high temperature areas.

Avoid running the wire across sharp metal edges or moving parts.

Don't mount where it will block air conditioning or heating vents.

Your CB Extension Speaker is designed for use with any CB Transceiver which has an External Speaker jack, and for either mobile or base station application. It is acoustically designed to cover the range of speech frequencies, and thus greatly enhances voice intelligibility (even under high-noisemobile conditions).

Speed Nuts

Bracket

Tapping Screws

Thumb Screw

Speaker

+056#..#6+10

Carefully consider a convenient location where your speaker will not get in the way, and yet project sound to the best advantage. You can mount it above or below a dashboard, on a rear deck or any other location. For mobile installations, keep in mind the safety and convenience of vehicle operation.

1.Use the mounting bracket as a template and mark holes for drilling.

2.Drill two 3/16" (4.5 mm) holes. Take care that you don't drill into existing wiring or trim.

3.Mount the bracket with two tapping screws and speed nuts.

4.Fasten the speaker between the bracket using the two thumb screws. Swivel the Speaker as desired and tighten the thumb screws securely.

5.Insert the speaker's plug into the Transceiver's External Speaker (or Remote Speaker) jack. Secure the wire out of the way (use clamps or ties as required).

© 2002 RadioShack Corporation. All Rights Reserved.

RadioShack and RadioShack.com are trademarks used by RadioShack Corp.

01A02

21-549C