6CNMKPI"#NCTO"%NQEM
YKVJ"'."$CEMNKIJV"CPF"5PQQ\G
63-991
OWNER’S MANUAL — Please read before using this equipment.
#"+/2146#06"#
If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information.
Rý— Signifies a Warning
. — Signifies a Caution
# — Signifies Important text
ýR"9#40+0)ýR"
Dispose of old batteries promptly and properly. Do not burn or bury them.
."%#76+10".
•Use only fresh batteries of the required size and recommended type.
•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
•Slide the battery compartment cover on the back in the direction of the arrow to remove it.
•If you do not plan to use the clock for a month or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts.
±"016'"±"
•While setting the time, date, and alarm time, if you do not press any key for more than 1 minute, the clock returns to the current time display.
•The clock announces the time and date as they advance on the display.
•The clock uses a 12-hour format. FC appears at the left of the display for a PM hour.
Thank you for purchasing a RadioShack Talking Alarm Clock. Your clock combines a simple design with advanced technology. It is ideal for your bedroom, kitchen, office, or in almost any room. You can set the clock to announce the time, year, date, and alarm time. It even counts up from a set time.
.
ALARM
OFF/ON
TALK/LIGHT/SNOOZE — Press to announce the date and time whenever you like, to light the display for about 3 seconds so you can see the time in the dark, or to turn off the alarm for about 8 minutes so you can get a little more sleep.
SET
UP
MODE
VOLUME HI/LO
Four Daily Alarms — let you set up to four different alarms at once, to remind you of important events.
100-Year Calendar — displays the calendar from 2000 to 2099.
+056#..+0)"$#66'4+'5
Your clock requires two AAA batteries (not supplied) for power. For the best performance and longest battery life, we
recommend RadioShack alkaline batteries.
.#
1.Insert two batteries in the compartment as indicated by the polarity symbols
(+ and -) marked inside. The clock beeps twice. Then 'C, ':, and '(0&& appear.
2. Replace the cover.
If the clock’s sound weakens or the display dims, replace the batteries. Rý.#
5'66+0)"6*'"6+/'.";'#4."/106*."#0&"'
1.Hold down SET for about 3 seconds. The clock announces the date then “time set” and “hour set,” and the hour digits flash.
2.Repeatedly press or hold down UP to set the correct hour.
3.Press SET to store the hour. The clock announces “minute set” and the minute digits flash.
4.Repeat Steps 2 and 3 to set the minutes, year, month, and date.
5.Press MODE to finish setting the clock. The clock beeps once then returns to the time display.
5'66+0)"6*'"#.#4/"6+/'
The clock lets you set up to four daily alarms.
1.Repeatedly press MODE until the clock announces “alarm 1.” 7B$ and ' (the current alarm number) appear.
2.Hold down SET for about 3 seconds. The clock announces “alarm 1 set” and “hour
© 2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
±"016'"±"
•Do not press TALK/LIGHT/SNOOZE to silence the alarm. Pressing TALK/LIGHT/ SNOOZE during the alarm time activates the snooze function.
•If you do not press a key within about 30 seconds after turning on the alarm, the current time automatically appears.
set.” AL.SET appears and the hour digits flash.
3.Repeatedly press or hold down UP to set the correct hour. The clock announces the hour as it advances on the display.
4.Press SET to store the hour. The clock announces “minute set” and the minute digits flash.
5.Repeatedly press or hold down UP to set the correct minute. The clock announces the minute as it advances on the display.
6.Press MODE to finish setting the alarm time. The clock beeps once.
7.Repeat Steps 1–6 to set alarms 2, 3, and 4.
8.Repeatedly press MODE to return to the current time.
75+0)";174"%.1%-
75+0)"81+%'"
#00170%'/'06
To hear the time, press TALK/LIGHT/SNOOZE. The clock announces the current time, and the display lights for about 3 seconds.
To hear the date and see the year, month, and date, press SET once. For example, if you press SET on December 2nd, the clock announces “Today is the second,” and the year, month, and date appear. Press SET again while the clock displays the year, month, and date, the clock announces the current time.
6740+0)"6*'"#.#4/"10"#0&" 1((
1.Repeatedly press MODE until the desired alarm setting appears.
2.Repeatedly press UP to turn the alarm on or off. When the alarm is turned on,
the clock announces “alarm (number) on,” and  (or the currently selected alarm number) appears. When the alarm is turned off, the clock announces “alarm (number) off,” and the selected alarm number disappears.
3.Repeatedly press MODE to return to the current time.
4.Set ALARM OFF/ON to ON. The selected alarm number appears.
5.At the preset alarm time, the clock announces the time. For example, if you set alarm 1 to sound at 10:35 AM, the clock repeatedly announces “Alarm 1, good morning. It is 10:35 AM,” then repeatedly sounds a series of four beeps for about 1 minute. To silence the alarm sooner, press any key.
6.To turn off all the preset alarms so they do not sound again, set ALARM OFF/ON to OFF.
To turn off a specific alarm, repeatedly press MODE until the desired alarm setting appears, press UP to turn off that alarm, then repeatedly press MODE to return to the current time.
6740+0)"6*'"*174.;"6+/'"
#00170%'/'06"10"#0&" 1((
1.To set the clock to announce the time at the beginning of each hour, press UP when the current time appears. The
clock announces “hourly report on,” and U appears. At the beginning of each hour, the clock chimes and announces the time.
2.To turn off the hourly report, press UP again. The clock announces “hourly report off,” and U disappears.
#&,756+0)"6*'"81.7/'
Slide on the back of the clock toward HI to increase the volume, or LO to decrease the volume.
75+0)"5011<'
When the alarm sounds, press TALK/LIGHT/ SNOOZE to silence the alarm for about 8 minutes. The backlight comes on and Æ appears.
After 8 minutes, the alarm sounds for 1 minute then automatically turns off.
To turn the alarm off sooner, press any key except TALK/LIGHT/SNOOZE or slide ALARM
to turn off the snooze.
To cancel the snooze function before it begins, slide ALARM OFF/ON to OFF.
2
Loading...