|
|
|
|
|
Purchase of Date |
|
.No Model |
|
ZIP State City, |
|
Address |
|
Name |
|
|
card, warranty complete Please |
||
|
Merchandiser Catalog |
Store Products Music |
at: Purchased |
|
|
|
|
|
.days 10 within |
PYLE this purchasing for you Thank your activate To .product card this mail please warranty, |
||||||||
|
Other |
Contractor/Installer Sound |
|
|
|
|
available) (if # Serial |
|
|
|
|
|
|
AMPLIFIERS PRO PYE |
|
|
return and detach |
|
|
|
|
|
|
|
|
|
registration warranty |
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
Order Mail |
|
|
|
|
|
|
|
|
|
|
|
|
|
card |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Limited Warranty
All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchaser of the amplifier.
Should the unit fail due to factory defects in material or workmanship, your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return Hotline at (718) 236-6948 to obtain a Return Authorization Number. This R.A. # must appear on the outside of your package and on all paperwork relating to your return.
When returning the unit to us for warranty service, it must be carefully packed and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
•A copy of your sales receipt or other proof of purchase
•A brief letter, indicating the problem you are experiencing with the product
•Include in your letter your return address, daytime phone number and R.A. number
•Also include a check or money order for $15.00 for return
shipping, handling and insurance, or provide your Visa/MC number with expiration date.
Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid. This warranty will be considered void if the unit was tampered with, improperly serviced or subject to misuse, neglect or accidental damage.
P T - 2 4 0 0 |
A m p l i f i e r |
P T - 2 8 0 0 |
A m p l i f i e r |
Owner’s Manual |
www.pyleaudio.com |
|
Your New Pyle Pro PT series P.A. |
|||
Amplifier gives you the power and |
|||
versatility you need in a professional |
|||
sound system. |
|
|
|
The amplifier's |
wide frequency |
||
response makes it suitable for |
|||
amplifying music or vocal program |
|||
material. It can be used for live bands, |
|||
office |
paging |
systems, |
public |
announcements, or a variety of other |
|||
installations. |
|
|
TABLE OF CONTENTS
1Features and Controls
2Installation Guidelines
2Input Connections
2Connecting a CD or tape player or tuner
2Connecting an equalizer or signal processor
2Stereo or Mono Inputs
2Speaker connecitons
3Bridged Mode Operation
3 Using headphones
3Connecting to standard AC power
3Mounting the amplifier
3Turning the amplifier on
3Using the power meter
3Using the left and right output level controls
3About the internal clip circuitry
3Using the A/B Speaker Selector Switch
3Caring for your Pyle Pro Amplifier
3Replacing a fuse
4Specifications
5Limited warranty
FEATURES AND CONTROLS
REAR PANEL, PT-2400/ PT-2800
Stereo/Mono Switch
Lets you select bridged mono input mode in combination with a mono signal source plugged into the LEFT input channel, or conventional stereo operation with a stereo input signal.
Speaker Terminals
Permit hook up of two stereo pair of speakers via the wire terminals.
You can choose either Channel A , Channel B, or use both at the same time.
Speaker impedance can range from 4 to 16 Ohms.
Please read this manual throughly before you attempt to set up and use the amplifier. It contains a range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of trouble-free service from this product.
FEATURES AND CONTROLS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FRONT PANEL, PT-2400/ PT-2800 |
Left and Right Power Meters |
|
|
|||
|
Indicate the output signal level for each channel. |
|
|
|||
|
|
|
|
|
|
|
Phone Jack
Lets you connect a pair of stereo headphones for private listening or cueing (monitoring) sound prior to "airing" it.
Left Output Level Controls
Lets you adjust the sound levels of left channel.
In the mono bridged mode, only the left gain control will adjust the output level.
Protection Circuit and Indicator
The indicator will be illuminated when the amplifier is powered on and at turn-on delay status; the indicator will be turned off after internal outputs are connected. The indicator will also be illuminated when the amplifier has abnormal problems, such as overload or excessive heat.
Right Output Level Controls
Lets you adjust the sound levels of right channel.
Clip Circuit and Indicator
This special circuitry protects the amplifier and speaker system from being damaged by overdriving power levels. Indicator lights remind the user to reduce the volume when amplifier output is excessive.
Speaker A/B Selector Switches
Permit you to select speakers attached to terminal set A, set B, or both.
Input Jacks
Let you connect a variety of audio input sources via the balanced (XLR/6.35mm phone jack combinations) or unbalanced (RCA) inputs.
Fan Cooling
Cooling system is automatically activated whenever amplifier is turned on. This forced air cooling system rapidly exhausts interior heat, reducing operating temperature and aiding performance.
Mono Bridged Output
Connect the speaker's positive (+) to the amplifier's LEFT/RED (+) terminal and negative (-) to the amplifeir's RIGHT/RED (+) terminal.
Switched AC Accessory Outlet
There is supplied AC OUTLET (SWITCHED MAX. 300W) which allow the electrical hook up of other units.
Voltage Switch
The amplifier has selectable input voltage from 110V/60Hz which is the standard in USA and CANADA. You can also switch the input voltage to 220V/50Hz for EUROPEAN operation. Please make sure the switch is in the proper position before operating, otherwise severe damage will result not cover by the warranty. Please also replace the fuse with proper rating in this situation (see the SPECIFICATIONS for the fuse rating).
PYLE PRO PT-2400/2800 Amplifier Owner’s Manual |
PYLE PRO PT-2400/2800 Amplifier Owner’s Manual |
– 1 |