|
|
|
|
Amplifier Specifications |
|
|
PT2000 |
|
|
PT1600 |
PT1200 |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Input Impedance |
|
|
|
|
20 k-Ohms |
|
|
20 k-Ohms |
20 k-Ohms |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
Continuous Output Power |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
Stereo Mode |
|
|
|
|
120W x 2 |
|
|
100W x 2 |
70W x 2 |
||||
|
|
|
|
20 Hz to 20 kHz, 8 Ohms |
|
|
|
|
|
||||||||
|
|
|
|
1 kHz, 4 Ohms |
|
|
|
|
175W x 2 |
|
|
140W x 2 |
100W x 2 |
||||
|
|
|
|
Maximum Power, 4 Ohms |
|
|
|
1000W x 2 |
|
|
800W x 2 |
600W x 2 |
|||||
|
|
|
|
Bridged Mode |
|
|
|
|
300W x 1 |
|
|
250W x 1 |
150W x 1 |
||||
|
|
|
|
20 Hz to 20 kHz, 8 Ohms |
|
|
|
|
|
||||||||
|
|
|
|
1 kHz, 4 Ohms |
|
|
|
|
350W x 1 |
|
|
280W x 1 |
200W x 1 |
||||
|
|
|
|
Maximum Power, 4 Ohms |
|
|
|
2000W x 1 |
|
|
1600W x 1 |
1200W x 1 |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
THD at rated output power |
|
0.1% |
|
|
0.1% |
0.1% |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
Frequency Response |
+/– 3 dB |
10 Hz to 50 kHz |
|
|
10 Hz to 50 kHz |
10 Hz to 50 kHz |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
Input Sensitivity for rated output power |
|
0.775V |
|
|
0.775V |
0.775V |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
Signal-to-Noise Ratio |
A-Weighted |
|
|
90 dB |
|
|
90 dB |
90 dB |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Speaker Impedance |
|
|
4-16 Ohms |
|
|
4-16 Ohms |
4-16 Ohms |
||||||
|
|
|
|
A or B only |
|
|
|
|
|
||||||||
|
|
|
|
A plus B |
|
|
|
|
8-16 Ohms |
|
|
8-16 Ohms |
8-16 Ohms |
||||
|
|
|
|
Bridged Mode |
|
|
|
8-16 Ohms |
|
|
8-16 Ohms |
8-16 Ohms |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
Power Requirement |
|
|
120 VAC, 60 Hz |
|
|
120 VAC, 60 Hz |
120 VAC, 60 Hz |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Power Fuse |
|
|
|
|
7A/250V |
|
|
6A/250V |
5A/250V |
||||
|
|
|
|
Dimensions H x W x D, inches |
|
5 1/8 x 19 x 12 |
|
4 15/32 x 18 7/8 x 12 |
4 3/16 x 18 15/16 x 10 3/4 |
||||||||
|
|
|
|
(mm) |
|
|
|
|
(130 x 482 x 305) |
|
|
(114 x 480 x 305) |
(100 x 482 x 273) |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
Weight, lbs (kg) |
|
|
|
28.19 (12.8) |
|
|
24.67 (11.2) |
19.82 (9.0) |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MerchandiserCatalog |
at:Purchased StoreProductsMusic |
|
PurchaseofDate |
.NoModel |
ZIPStateCity, |
Address |
Name |
PYLEthispurchasingforyouThank youractivateTo.product cardthismailpleasewarranty, .days10within |
card,warrantycompletePlease |
Limited Warranty |
|
|
||||
|
|
All PYLE PRO products are carefully constructed and tested before |
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
shipment. Units purchased in the USA are warranted to be free of |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
defects in material and workmanship for two (2) years from the date |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
of purchase. This warranty is limited to the original retail purchaser |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
of the amplifier. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Should the unit fail due to factory defects in material or workmanship, |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
your unit will be repaired or replaced at the sole discretion of PYLE. |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To obtain warranty service, you must first call our Consumer Return |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hotline at (718) 236-6948 to obtain a Return Authorization Number. |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This R.A. # must appear on the outside of your package and on all |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
paperwork relating to your return. |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When returning the unit to us for warranty service, it must be carefully |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
packed and shipped, prepaid, to: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
returnand detach |
|
|
R.A.#: _____________ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PYLE PRO Service Center |
|
|
|
|
|
|
|
|
|
|
|
AMPLIFIERSPROPYE |
|
|
|
|
|
1600 63rd Street |
|
|
|
Other |
Contractor/InstallerSound |
|
|
|
available)(if# Serial |
|
|
|
|
|
|
|
Brooklyn, NY 11204 |
|
||
|
|
|
|
|
|
|
|
|
You must also include the following items with your return: |
|
|||||||
|
|
|
|
|
|
|
registrationwarranty |
|
|||||||||
|
|
|
|
|
|
|
|
serviced or subject to misuse, neglect or accidental damage. |
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
A copy of your sales receipt or other proof of purchase |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
A brief letter, indicating the problem you are experiencing |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
with the product |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
Include in your letter your return address, daytime phone |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
number and R.A. number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• |
Also include a check or money order for $15.00 for return |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
shipping, handling and insurance, or provide your Visa/MC |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
number with expiration date. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our obligation under this warranty is limited to the repair or replacement |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
of the defective unit when it is returned to us prepaid. This warranty |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
will be considered void if the unit was tampered with, improperly |
|
||
|
|
Order Mail |
|
|
|
|
|
|
|
|
card |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P T 2 0 0 0 |
A m p l i f i e r |
P T 1 6 0 0 |
A m p l i f i e r |
P T 1 2 0 0 |
A m p l i f i e r |
Owner’s Manual
Your new Pyle Pro PT Series P.A. Amplifier gives you the power and versatility you need in a professional sound system. The amplifier’s wide frequency response makes it suitable for amplifying music or vocal program material. It can be used for live bands, office paging systems, public annoucement systems, or a variety of other installations.
TABLE OF CONTENTS
1Features and controls, PT2000 and PT1600
2Features and controls, PT1200
3Installation Guidelines
3 |
Input Connections |
3Connecting a CD or tape player or tuner
3Connecting an additional CD sound source
3Connecting an equalizer or signal processor
3Connecting microphones
3Speaker connections
3Connector options
4Bridged Mode Operation
4 |
Using headphones |
4Connecting to AC power
4Mounting the amplifier
4Turning the amplifier on
4Using the power meter (PT2000 and PT1600 only)
4Using the meter range selector (PT2000 and PT1600 only)
5Using the left and right output level controls
5About the internal clip circuitry
5Using the A/B Speaker Selector
5Caring for your Pyle Pro Amplifier
5Replacing a fuse
6Specifications
6 |
Limited warranty |
Please read this manual thoroughly before you attempt to set up and use the amplifier. It contains a range of |
|
installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of |
|
trouble-free service from this product. |
|
FEATURES AND CONTROLS |
Meter Range Switch |
|
|
|
Controls the sensitivity |
|
of the power meter |
FRONT PANEL, PT2000
Left and Right Power Meters Indicates the output signal level for each channel
Clip Circuit and Indicator This special circuitry protects the amplifier and speaker system from being damaged by overdriving power levels. Indicator lights remind the user to reduce the volume when amplifier output is excessive.
Power On/Off |
|
Phone Jack |
Left and Right Output Level Controls |
Lets you connect a pair of stereo headphones |
Lets you adjust the sound levels for each channel |
for private listening or cueing (monitoring) |
|
sound prior to “airing” it. |
|
Speaker A/B Selector Switches |
|
Permits you to select speakers |
|
attached to terminal set A, set B or |
|
both. |
|
FEATURES AND CONTROLS |
Meter Range Switch |
|
|
|
Controls the sensitivity |
Left and Right Power Meters |
of the power meter |
|
|
Indicates the output signal level |
|
for each channel |
|
FRONT PANEL, PT1600 |
|
Power On/Off
Left and Right Output Level Controls Lets you adjust the sound levels for each channel
REAR PANEL, PT2000 and PT1600
Clip Circuit and Indicator This special circuitry protects the amplifier and speaker system from being damaged by overdriving power levels. Indicator lights remind the user to reduce the volume when amplifier output is excessive.
Phone Jack Lets you connect a pair of stereo headphones for private listening or cueing (monitoring) sound prior to “airing” it.
Speaker A/B Selector Switches Permits you to select speakers attached to terminal set A, set B or both.
STEREO |
INPUT |
|
R |
L |
|
|
|
1 |
MONO |
|
MONO |
|
|
|
GND |
|
|
|
|
2 |
|
R |
L |
Stereo/Mono Selector Lets you select bridged mono input mode in combination with a mono signal source plugged into the Left channel, or conventional stereo operation with a stereo input signal.
Input Jacks Lets you connect a variety of audio input sources via the balanced (XLR/6.35mm phone jack combinations) or unbalanced (RCA) inputs.
R |
|
|
L |
FUSE |
|
|
|
||
RIGHT |
LEFT |
VOLTAGE |
||
A |
|
|
|
|
– |
|
MONO |
+ |
|
B |
|
|
|
|
+ |
– |
– |
+ |
|
|
SPEAKER |
|
AC OUTLET |
|
|
|
|
|
|
Speaker terminals |
AC Outlet |
|||
Permits hookup of two |
This switched outlet allows |
|||
stereo pairs of speakers |
the electrical hookup of |
|||
via the wire terminals. |
other units, with maximum |
|||
Speaker pair A can also |
load of 300W. |
|||
be connected via the |
|
|||
6.35 mm phone jacks |
|
|||
provided. |
|
|
||
Fan Cooling |
|
|
||
Cooling system is automatically activated whenever amplifier |
||||
is turned on. This forced air cooling system rapidly exhausts |
||||
interior heat, reducing operating temperature and aiding |
||||
performance. |
|
|
PYLE PRO PT2000/1600/1200 Amplifier Owner’s Manual |
PYLE PRO PT2000/1600/1200 Amplifier Owner’s Manual |
– 1 |