Commercial EFX® Owner’s Manual
EFX® 556
C O M M E R C I A L P R O D U C T S D I V I S I O N
C O M M E R C I A L P R O D U C T S D I V I S I O N
Before You Begin
Thank you for purchasing the Precor EFX556TM. Built to the exacting standards of the health club environment, the EFX556 is intended for commercial use and can withstand the rigors of daily club use with little maintenance.
Before using the Precor EFX556, we urge you to familiarize yourself and your staff with the entire Owner’s Manual. Understanding this manual will help you and your customers use the EFX556 safely and successfully.
ABOUT THIS MANUAL
Inside this manual, you will find instructions for installing and using the EFX556. To maximize the use of the EFX556, please study this manual thoroughly. The manual uses the following conventions for identifying special information:
“Note:” Contains additional information that applies to the preceding text.
“Important:” Indicates information to which you should pay special attention.
“CAUTION:” Indicates steps or information necessary to prevent harm to yourself or damage to the equipment.
“WARNING:” Provides instructions to prevent electrical damage to the equipment and prevent injuries to yourself.
“DANGER:” Indicates steps you must take to prevent electrical shock.
OBTAINING SERVICE
Do not attempt to service the EFX556 yourself except for the maintenance tasks described in this manual. The EFX556 does not contain any user-serviceable parts. For information about product operation or service, contact an authorized Precor Commercial Products Customer Service Representative at 1-888-665-4404.
To help the customer service representative expedite your call, have your serial number available. To locate the serial number, kneel down alongside the EFX and look for a label inside the rear cover.
Model number: EFX556
Unit number: _____ Serial number: ____________________________
Unit number: _____ Serial number: ____________________________
Unit number: _____ Serial number: ____________________________
Unit number: _____ Serial number: ____________________________
Unit number: _____ Serial number: ____________________________
Unit number: _____ Serial number: ____________________________
Unit number: _____ Serial number: ____________________________
If you have any questions regarding the EFX556, use the model and serial numbers whenever you call your Precor dealer or servicer.
page 2
C O M M E R C I A L P R O D U C T S D I V I S I O N
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
•Read all instructions before using the EFX556. These instructions were written to ensure your safety and to protect the unit.
•To ensure the proper use and safety of the EFX556, make sure that all users read this manual. Please make this manual a part of your training program.
Remind the club users that before beginning any fitness program, he or she should obtain a complete physical examination from his or her physician.
Il est conseillé de subir un examen médical complet avant d’entre-pren- dre tout programme d’exercise. Si vous avez des étourdissements ou des faiblesses, arrêtez les exercices immédiatement.
DANGER — To reduce the risk of electrical shock, always unplug the unit from its power source before cleaning or performing any maintenance tasks.
WARNING — To reduce the risk of burns, fire, electric shock, or injury to persons, take the following precautions:
•The EFX556 should never be left unattended when plugged in. Unplug the unit from the outlet when it is not in use, before cleaning it, and before putting on or taking off parts.
•Do not allow children on or near the EFX.
•Use the EFX556 only for its intended use as described in this manual. Do not use accessory attachments that are not recommended by the manufacturer—such attachments might cause injuries.
•Never operate the unit if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped in water. Return the unit to a service center for examination and repair.
•Keep the power cord away from heated surfaces.
•Never drop or insert any object into any opening. Keep hands away from moving parts.
•Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
•Do not use outdoors.
•To disconnect, turn all controls to the OFF (0) position, then remove the power plug from the outlet.
WARNING — Connect the EFX to a properly grounded outlet only. See Grounding Instructions on page 4.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
page 3
C O M M E R C I A L P R O D U C T S D I V I S I O N
GROUNDING INSTRUCTIONS
The EFX556 must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current which reduces the risk of electrical shock. The EFX556 is equipped with a power cord having an equipment-grounding conductor and a grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. If you do not follow these Grounding Instructions, you could void the Precor limited warranty.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the EFX is properly grounded. Do not modify the plug provided with the unit—if it doesn’t fit the outlet, get a proper outlet installed by a qualified technician.
Diagram A
Correct power outlet for U.S. Markets: 20 amp 120-volt and 240-volt plugs.
120-volt grounding plug |
240-volt grounding plug |
120V Units Designated for U.S. Markets
The EFX556 is for use on a nominal 120-volt circuit. The unit’s grounding plug looks like the plug illustrated in Diagram A. The power outlet must have the same configuration as the plug. No adapter should be used with this product.
240V Units Designated for U.S. Markets
The EFX556 is for use on a nominal 240-volt circuit. The unit is factory-equipped with a specific power supply cord to permit connection to a proper electric circuit. Make sure that the EFX is connected to an outlet having the same configurations as the plug. See Diagram A. No adapter should be used with this product. If the EFX must be reconnected for use on a different type of electrical circuit, the reconnection must be made by qualified service personnel.
SAFETY APPROVAL
When identified with the ETL-c logo, the EFX has been tested and conforms to the requirements of CAN/CSA-E-335-1/2-94, Safety of Household and Similar Electrical Appliances.
page 4
C O M M E R C I A L P R O D U C T S D I V I S I O N
RFI — RADIO FREQUENCY INTERFERENCE
Federal Communications Commission Part 15
The EFX has been tested and found to comply with,
•the IEC EMC Directive (international electromagnetic compatibility certification)
•the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. The EFX generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the owner’s manual instructions, may cause harmful interference to radio communications. Operation of the EFX in a residential area is likely to cause harmful interference. If this occurs, the user will be required to correct the interference at his or her own expense.
CAUTION — Per FCC rules, changes or modifications to the
EFX not expressly approved by Precor, could void the user’s authority to operate the equipment.
Canadian Department of Communications
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioéélectriques dépassant les limites applicables aux appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministére des Communications du Canada.
EUROPEAN APPLICATIONS
This product conforms to the requirements of the European Council Directive 89/336/ EEC, Electromagnetic Compatibility and has been tested to the following standards:
EN55022, Limits & Methods of Measurement of Radio Interference, Information Technology Equipment (Class A).
EN50082-1, Generic Immunity Standard for Residential, Commercial and Light Industrial Products (Class A).
This product additionally conforms to the requirements of the European Council Directive 73/23/EEC, LowVoltage Directive and has been tested to the following standard:
IEC 335-1, Safety of Household and similar Electrical Appliances.
European Applications - 240 Volt Units Only
This product has been tested to the requirements of EN55022, “Limits & Methods of Measurement of Radio Interference, Information Technology Equipment.” Per that standard, the EFX556 is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user is responsible to take adequate measures to alleviate the interference.
page 5
C O M M E R C I A L P R O D U C T S D I V I S I O N
PERSONAL SAFETY
When using the EFX, take the following precautions:
•Do not allow children on or near the EFX. Do not leave children unsupervised around the EFX.
•Completely assemble the EFX556 before using it. Check the unit before each use. Do not continue to operate the EFX556 when it is not working properly and return the unit to a service center for examination and repair.
•Keep all electrical components, such as the power cable and I/O switch, away from liquids to prevent shock. Do not set anything on the casing, handrails, or display console. Place liquids only in the appropriate receptacles.
•Assemble and operate the EFX on a solid, level surface. Locate the EFX a few feet from walls or furniture. Keep the area behind the EFX clear.
•Maintain the EFX in good working condition. (See the Maintenance section).
Run through a check list prior to each use. Verify that all fasteners are secure.
•Wear proper exercise clothing and shoes during a workout—no loose cloth-
ing. Tie long hair back. Keep towels away from moving parts.
•Use care when getting on or off the EFX. Use the stationary handrail(s) whenever possible. Keep your body and head facing forward. Never attempt to turn around on the EFX.
Diagram B Avoid injury from the roller arm mechanism.
Front cover
Roller arm
•Never place your hand(s) or feet in the path of the roller arm because injury may occur to you or damage may occur to the equipment. Refer to Diagram B.
•Do not use accessory attachments that are not recommended by the manu- facturer—such attachments might cause injury.
•Do not rock the unit. Do not stand on the display console or casing.
•Do not attempt to service the EFX yourself other than the assembly and maintenance instructions found in this manual. Refer to Obtaining Service.
•Do not overexert yourself or work to exhaustion.If you feel any pain or abnormal symptoms, stop your workout immediately and consult your physician.
PRECOR HEART RATE OPTIONS—SAFETY GUIDELINES
The Precor Heart Rate Options are created and designed exclusively for Precor products. The equipment is very sensitive—you should use the heart rate options with this in mind and take time to read the guidelines found in this owner’s manual. If you purchased the POLAR® chest strap, review the guidelines found in the
Precor Heart Rate Option Owner’s Manual that is supplied with that option.
page 6
C O M M E R C I A L |
P R O D U C T S |
D I V I S I O N |
Table of Contents |
|
|
Before You Begin .............................................................. |
|
2 |
About this Manual .................................................................. |
|
2 |
Obtaining Service .................................................................. |
|
2 |
Important Safety Instructions ................................................ |
3 |
|
Grounding Instructions .......................................................... |
|
4 |
Safety Approval ..................................................................... |
|
4 |
RFI — Radio Frequency Interference .................................... |
5 |
|
European Applications .......................................................... |
|
5 |
Personal Safety ..................................................................... |
|
6 |
Precor Heart Rate Option - Safety Guidelines ...................... |
6 |
|
Unpacking the EFX ........................................................... |
|
9 |
Standard Equipment .............................................................. |
|
9 |
Optional Equipment ............................................................... |
|
9 |
Hardware Kit ......................................................................... |
|
10 |
Acquire the Appropriate Tools ............................................... |
10 |
|
Setting Up the EFX ......................................................... |
|
11 |
Installation Requirements ...................................................... |
|
11 |
Assembly Instructions .......................................................... |
|
11 |
Turning the EFX556 ON and OFF .......................................... |
15 |
|
Club Information ............................................................ |
|
16 |
Changing the Club Settings ................................................... |
|
16 |
Selecting the Language ......................................................... |
|
17 |
Determining the Units of Measure ........................................ |
17 |
|
Setting a Workout Time Limit ................................................ |
18 |
|
Setting a Pause Time Limit .................................................... |
|
18 |
Viewing the Odometer, Hours of Use, |
|
|
Software Version, and Error Log ........................................... |
18 |
|
Using CSAFE Standard Equipment ....................................... |
19 |
|
The EFX556 Display ....................................................... |
|
20 |
Features on the Display Console .......................................... |
20 |
|
Top Display Windows ............................................................ |
|
21 |
Center Display Window ......................................................... |
|
21 |
Elongated Center Display ...................................................... |
|
21 |
Keys on the Display Console ................................................ |
23 |
|
Keypad Tips ........................................................................... |
|
23 |
page 7
C O M M E R C I A L |
P R O D U C T S |
D I V I S I O N |
|
Table of Contents |
|
|
|
Exercising on the EFX ................................................... |
|
|
26 |
Using the Handlebars ............................................................ |
|
|
26 |
Using the Stationary Handrails ............................................. |
|
26 |
|
Pause, Cool Down and Exit Features .................................... |
|
26 |
|
Workout Tips ......................................................................... |
|
|
28 |
Quick Steps to Working Out |
.................................................. |
|
28 |
Cooling Down After a Workout .............................................. |
|
29 |
|
Courses ........................................................................... |
|
|
30 |
The Heart Rate Feature ......................................................... |
|
|
30 |
Utilizing the Smart Rate®Feature .......................................... |
|
30 |
|
Manual Mode and the Quick Start Key ................................. |
|
31 |
|
Cross Training Course ........................................................... |
|
|
32 |
Cross Country and Hill Climb Courses ................................. |
|
32 |
|
Interval Course ..................................................................... |
|
|
32 |
Weight Loss Course .............................................................. |
|
|
33 |
Maintenance.................................................................... |
|
|
34 |
Cleaning the Equipment ........................................................ |
|
|
34 |
Storing the POLAR® Chest Strap .......................................... |
|
34 |
|
Servicing the EFX ................................................................. |
|
|
34 |
Long Term Storage ................................................................ |
|
|
34 |
Workout Statistics Log .................................................. |
|
|
35 |
Warranty Card ....................................................................... |
|
|
39 |
Specifications ............................................................ |
|
back cover |
|
page 8
C O M M E R C I A L P R O D U C T S D I V I S I O N
Unpacking the EFX
Your EFX556 is carefully inspected before shipment so it should arrive in good operating condition. Precor ships the unit in the following pieces:
base frame assembly
upper column support with display console
handlebars (left and right)
upper column support clamp covers (2 pieces with rubber grommet)
hardware kit, power cord, Owner’s Manual
CAUTION: This unit weighs over 200 pounds (90 kilograms).To avoid back strain and ensure the safety of the unit and yourself, we suggest that you get assistance before removing the unit from the pallet. To remove the EFX from the wood pallet, be sure to ask for assistance from more than one adult.
If any items are missing, contact your Precor Commercial Products Service Representative at 1-888-665-4404.
STANDARD EQUIPMENT
The EFX556 incorporates the Precor Smart Rate® and Heart Rate features into it’s display console. Devices, such as FitLinxxTM, that are CSAFETM compatible, can also be attached.
Note: An optional POLAR®chest strap must be worn to transmit a user’s heart rate to the display console’s receiver. A factory-installed option, the Precor “touch” heart rate can be purchased (at point of sale) and provides electrode strips on the center handrails. When a user places his or her hands over the strips and grasps the handrail(s), a heart rate is transmitted to the receiver.
OPTIONAL EQUIPMENT
Optional equipment available through your dealer includes:
•POLAR® Heart Rate Option — chest strap.
•Precor Heart Rate “touch” Option — This option requires special handrails that must be factory installed and purchased at the time of the sale. It is not an accessory item that can be purchased once the unit is assembled.
•the CSAFE option (Stores personal workout statistics in a computer file. Operation requires cable connection to a separate computer.)
If you are interested in obtaining Precor option kits for your unit, check with your dealer. To locate the dealer nearest you, call 1-888-665-4404. For customer service, see Obtaining Service on page 2.
page 9
C O M M E R C I A L P R O D U C T S D I V I S I O N
HARDWARE KIT
Carefully unpack the parts from the shipping container. Open the Hardware kit and make sure that you have the following items as shown in Diagram 1:
(A) four socket hex screws—upper column assembly
(B) four washers—upper column assembly
(C) four buttonhead hex screws—covers for upright assembly
(D) eight buttonhead hex screws—handlebars
(E) 5/32" hex key—screws on bracket covers
(F) 7/32" hex key—screws on the handlebars ( Note: A hex torque wrench is also required, although it isn’t supplied.)
(G) 1/4” hex key— upper column assembly ( Note: A hex torque wrench is also required, although it isn’t supplied.)
Rubber grommet, upper and lower bracket covers (not shown in Diagram 1)
Diagram 1 EFX556
Hardware kit
A
C
D
B
E
F
G
If any items are missing, contact your dealer. For the Precor authorized dealer or servicer nearest you, call 1-888-665-4404.
Note: After assembling the EFX, be sure to store the hex keys in a secure place. The tools are used for maintenance procedures that are described in this manual.
ACQUIRE THE APPROPRIATE TOOLS
Obtain the following tools before assembling the EFX.
Wire cutter
SAE Standard socket set with a ratchet or 8” crescent wrench
Hex torque wrench
page 10
C O M M E R C I A L P R O D U C T S D I V I S I O N
Setting Up the EFX
You do not need any special knowledge or experience to set up the EFX. However, you will need assistance. Because of the size and weight of the EFX, it is recommended that at least three adult persons assemble it.
INSTALLATION REQUIREMENTS
Follow these installation requirements when installing the EFX. If you do not install the EFX according to the following guidelines, you could void the Precor limited warranty.
•Set up the EFX on a solid, flat surface. Unpack and assemble the EFX close to where you’ll use it. Make sure that the flat surface under the unit is smooth and level. A level unit is required for the user’s safety and for proper operation.
•Provide ample space around the unit. Open space around the unit makes for a safer mount and dismount.
•Fill out and mail the limited warranty card. Be sure that the EFX is turned OFF. To locate the serial number, kneel down alongside the EFX and look for a label inside the rear cover. Write the serial number onto the Precor limited warranty card found on the back cover of this manual. Refer to Obtaining Service on page 2 and write the number(s) there as well.
•Use the appropriate voltage, dedicated circuit, and grounding as specified on the EFX556. The EFX556 is available in a 120-volt and a 240-volt model. Refer to the identification label next to the ON/OFF (I/O) switch to determine the voltage, power cord, and plug that your EFX556 requires. Make sure that the EFX556 is connected to a power outlet that has the same configuration as the plug.
CAUTION: Use the appropriate power cord and plug for your unit. Do not use a non-grounded outlet. Electrical damage can occur if the EFX556 is connected to an improper power source.
ASSEMBLY INSTRUCTIONS
You do not need any special knowledge or experience to set up an EFX556, however you will need assistance and certain tools. Because of its weight and size, ask for several assistants to help you assemble the EFX556.
To assist you in the assembly, the items in the hardware kit, shown in Diagram 1, correspond to a particular letter in the alphabet.These letters appear throughout the assembly instructions. Refer to Diagram 1, as needed.
1.Unpack the EFX556. Remove the packing materials and loose contents (upper console assembly with electronic console, hardware kit, bracket covers, handrails, and power cord) from inside the cardboard pockets and from around the base frame assembly.
2.Pull the large cardboard piece away from the base frame assembly. Ask for assistance to move the EFX556 off the shipping pallet.You may need to cut the tie wraps that hold the base frame and roller arms to the pallet.
3.Move the unit to the location where you plan to use it. Make sure that the EFX556 is unplugged and turned OFF. Do not assemble the EFX556 if it is plugged into a power outlet.
page 11
C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 2 |
Attach the |
|
|
handlebars to the |
|
|
base assembly. |
|
|
Handlebar |
|
|
Base frame |
|
|
Align curved edge |
|
|
on base assembly |
|
|
with handlebar’s |
1 |
|
curved edge. |
|
|
|
2 |
4.Attach a handlebar to one side. Diagram 2. Take the following steps:
a.Remove the 8 handlebar screws (D) from the Hardware kit.
b.Pick up a handlebar and place it onto the base. See Diagram 2, #1.
c.Align the mounting holes and insert 4 screws (D).
d.Securely tighten the screws with the hex key provided. See Diagram 2, #2.
e.Perform steps b. through d. on the opposite side.
Important: Once the handlebars are secured, use a hex torque wrench to tighten all 8 bolts to 25 ft-lbs (300 in-lbs).
Diagram 3 Position the console assembly over the base frame and connect the cable.
Upright support tube
RJ45 Cable receptacle
Base frame support
RJ45 Cable connector 
5.Position the console assembly over the base support. Diagram 3. Remove any tape that secures the RJ45 cable. Have an assistant hold the upper support tube over the base frame support (display console must face the foot pedals) while you connect the cable and align the bolt holes.
CAUTION: Do not stretch, crimp, or damage the cable. Excess cable may be gently pushed into the upper support tube. Cables damaged by improper installation will not be covered by the Precor limited warranty.
6.Connect the cables. Diagram 3. Insert the cable into it's receptacle. Just like a telephone connection, a definite "click" is heard when a good connection is made. If you do not hear a "click," try reinserting the cable again. Place the excess cable inside the upright support tube.
page 12
C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 4 Secure the console assembly to the base frame.
Upright support tube
Screws (A) and washers (B)
Upper and lower brackets
Base support
7.Secure the console assembly to the base frame support. Diagram 4. Place a washer (B) on each of 4 screws (A). Align the mounting holes and insert the screws through the upper and lower bracket. Use the hex key provided to alternately tighten each screws until all four screws are secure.
Important: Once the upper console assembly is secured, use a hex torque wrench to tighten all 4 bolts to 140 in-lbs.
Diagram 5 Installing the covers.
Upright support tube
Split rubber grommet 
Rear bracket cover Center tube
RJ45 cable
Front bracket cover
1
2 |
8.Install the bracket covers. Diagram 5. Remove the 2 bracket covers, the split rubber grommet and 4 screws (C) from the Hardware kit. Then, take the following steps:
a.Use 2 screws (C) to attach the rear bracket cover to the center tube. See Diagram 5, #1. Tighten the screws with the hex key provided.
b.Position the split rubber grommet around the upright support tube. Slide the grommet against the rear bracket cover to help secure it in place.
c.Use the remaining 2 screws to install the front bracket cover. Align the mounting holes and tighten the screws. See Diagram 5, #2.
CAUTION: Do not overtighten the screws or you may inadvertently crack the plastic covers.
page 13
C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 6 |
Level the unit. |
|
Rear casing |
|
Rear crossbar |
|
Adjustable rear foot |
Note: You have completed the assembly of the EFX556. To level the unit and connect it to a power source, continue with the steps below.
9.If you need to move the EFX, ask for assistance. The EFX weighs over 200 pounds (90 kilograms). A hand cart may be useful to help move the unit.
CAUTION: A fully-assembled EFX556 is very heavy. To avoid possible injury, Precor recommends that more than one person move the EFX556 to its final location.
10.Level the unit. Diagram 6. The unit has adjustable rear feet that can help level the unit ± 1/4". To rotate the adjustable rear feet, have an assistant stand in front of the display console and face the rear feet. Ask the assistant to grasp the small handrails near the display console and pull toward him or her. The rear feet should lift off the floor which will allow you to rotate the rubber feet in the necessary direction.
page 14
Loading...