26” HD Widescreen LCD TV/DVD Combo
TDX-02610B
Questions? Need some help?
This manual should help you understand your new product. If you have questions, call our toll-free number found on the insert with this icon:
Or visit www.polaroid.com.
©2007 by |
. All rights reserved. |
“Polaroid” and “Polaroid and Pixel” are trademarks of Polaroid Corporation.
Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.
For service, support and warranty information, visit www.polaroid.com.
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To find out how to properly dispose of this product, please go to www.polaroid.com and click on “Company“ or call the customer service number for your country listed in the instruction manual.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc. All rights reserved.
This TV incorporates High-Definition Multimedia Interface (HDMITM) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
FCC
Federal Communications
Commission Statement
This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1.Reorient/Relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into an outlet on a circuit which is different from what the receiver is connected to.
4.Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user authority to operate the equipment.
1
ENGLISH
Warnings and Precautions
Warnings and Precautions
To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment.
Before operating this equipment, please read this manual completely, and keep it nearby for future reference.
This symbol is intended to alert the user to avoid the risk of electric shock.
This equipment must not be disassembled by anyone except qualified service personnel.
WARNING
This symbol is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the appliance.
CAUTION
To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
▪TO REDUCE THE RISK OF ELECTRIC SHOCK,
▪DO NOT REMOVE COVER (OR BACK).
▪NO USER-SERVICEABLE PARTS INSIDE.
▪REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Important Safety Instructions
This symbol indicates caution points.
This symbol indicates actions that should not be done.
This symbol indicates actions that must be performed.
▪Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc. The equipment may fall, causing serious injury to children or adults and serious damage to the equipment itself.
▪ Use only a cart or stand recommended by the manufacturer. This equipment and recommended cart or stand should be handled with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart/stand to overturn.
▪ Do not disable the 3-wire grounding type plug. The grounding pin on the 3-prong plug is an important feature. Removing the grounding pin will increase the risk of damaging the equipment.
▪If you can not fit the plug into the electrical outlet, contact an electrician to install a grounding outlet.
▪Always operate this equipment from the type of power source indicated on the rear of the serial/model plate.
▪Never overload wall outlets and extensions.
2
Warnings and Precautions
▪ Use and handle the power cord with care. Do not place any heavy objects on the AC
power cord. |
|
|||
▪ Do not pull the AC power cord. Do not handle the AC power cord with a wet hand. |
ENGLISH |
|||
▪ Do not touch the power cord and antenna cable during lightning. |
||||
|
||||
▪ Remove the plug from the wall outlet, if the equipment will not be used for a long period |
|
|||
of time. |
|
|||
▪ Do not place, use or handle this equipment near water. |
|
|||
▪ Never expose the equipment to liquid, rain, or moisture. |
|
|||
Seek for service if any of the above is spilled into the equipment. |
|
|||
▪ Do not expose the equipment to extreme temperature or to direct sunlight, as the |
|
|||
equipment may heat up and suffer damage. |
|
|||
▪ Do not install the equipment near any heat sources such as radiators, heat registers, |
|
|||
stoves, or any other apparatus that might produce heat. |
|
|||
▪ Do not attempt to service the equipment yourself. |
|
|||
▪ Opening and removing the covers may expose you to dangerous voltage or other |
|
|||
hazards and may void your warranty. Refer service to qualified personnel. |
|
|||
▪ Do not place or drop any other objects on top. |
|
|||
▪ Do not insert anything into the ventilation holes of your equipment. |
|
|||
Inserting any metal or flammable objects may result to fire or electric shock. |
|
|||
▪ Protect the power cord from being walked on or pinchrd particularly at plugs ,convenience |
|
|||
receptacles, and the point where they exit from the apparatus. |
|
|||
▪ Do not place the equipment on uneven or unstable carts, stands, tables, shelves etc. The |
|
|||
equipment may fall, causing serious injury to children or adults and serious damage to |
|
|||
the equipment itself. |
|
|||
Always place the equipment on the floor or on a surface that is sturdy, level, stable and |
|
|||
strong enough to support the weight of the equipment. |
|
|||
▪ Do not block any ventilating openings. Leave an open space around the equipment. |
|
|||
Never place the equipment : |
|
|||
on a bed, sofa, rug, or any other similar surfaces; too close to drapes/curtains/walls, in a |
|
|||
bookcase, built-in cabinet, or any other similar places that may cause poor ventilation. |
|
|||
▪ Unplug this apparatus during lightning storms or when unused for long periods of time. |
|
|||
▪ Refer all servicing to qualified service personnel. Servicing is required when the |
|
|||
apparatus has been damaged in any way, such as power-supply cord or plug is |
|
|||
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus |
|
|||
has been exposed to rain or moisture, does not operate normally, or has been dropped. |
|
|||
|
|
|||
▪ Always remove the power cord from the outlet before cleaning the equipment. |
|
|||
▪ Never use liquid or aerosol cleaners on the equipment. |
|
|||
Clean only with a soft dry cloth. |
|
|||
|
|
|||
▪ Only use attachments/accessories specified by the manufacturer. |
|
|||
|
3 |
|
|
|
|
|
|
||
Warnings and Precautions
Outdoor Antenna Safety Instructions
If an outdoor antenna is connected, follow the precautions below:
▪ An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits.
▪When installing an outdoor antenna system, extreme caution should be taken to prevent contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs.
Section 810 of National Electrical Code (NEC) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
|
Antenna lead-in wire |
Ground clamps |
|
|
Antenna discharge unit |
|
(NEC section 810-20) |
Electric service |
|
equipment |
Grounding conductors |
|
(NEC section 810-20) |
|
Ground clamps |
|
Power service grounding |
|
(NEC Art250 part H) |
NEC : National Electrical code
EXAMPLE OF OUTDOOR ANTENNA GROUNDING
4
TABLE OF CONTENTS |
|
Federal Communications Commission Statement .......................... |
1 |
Warnings and Precautions |
|
Important Safety Instructions....................................................................................... |
2 |
Antenna Safety Instructions......................................................................................... |
4 |
Chapter 1 Introducing the LCD TV |
|
Key Features ............................................................................................................... |
6 |
Package Contents ....................................................................................................... |
7 |
Setting Your LCD TV.................................................................................................... |
8 |
Your LCD TV............................................................................................................... |
11 |
Your Remote Control ................................................................................................. |
14 |
Chapter 2 Installing the LCD TV |
|
Connecting a TV Cable or an Antenna ...................................................................... |
18 |
Connecting a VCR..................................................................................................... |
23 |
Connecting a Video Camera or Game Console ........................................................ |
24 |
Connecting a DVD Player.......................................................................................... |
26 |
Connecting a Digital TV Cable Box or Digital Satellite Receiver ............................... |
27 |
Connecting an AV Equipment with HDMI Connector................................................. |
28 |
Connecting an AV Equipment with DVI Connector .................................................... |
29 |
Connecting a PC........................................................................................................ |
30 |
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System........................ |
31 |
Chapter 3 USING THE FEATURES |
|
Using The Built-in DVD.................................................................................... |
32 |
Using The USB Storage and SD Card Reader................................................... |
34 |
Wide Screen Viewing ...................................................................................... |
37 |
Using the Program Guide ................................................................................ |
38 |
Operating the Menu........................................................................................ |
39 |
Customizing the VIDEO Settings ...................................................................... |
41 |
Customizing the AUDIO Settings ..................................................................... |
43 |
Customizing the TV Settings ........................................................................... |
45 |
Customizing the SETUP Settings...................................................................... |
47 |
Using the Program Block Settings..................................................................... |
50 |
Specifications ........................................................................................................ |
55 |
Programming your Remote Control......................................................... |
56 |
5
ENGLISH
Chapter 1 Introducing the LCD TV
Chapter 1
Introducing the LCD TV
Key Features
Various Audio/Video terminals for external equipment connection
▪2 sets of composite A/V input terminals
▪1 set of S-VIDEO terminals
▪2 sets of component Video input terminals
▪1 VGA/ Audio input terminals
▪2 HDMI/Audio input terminals
▪1 set of Audio(L/R) output terminals
▪1 Headphone terminal
Built-In Slot-type DVD Player
▪ Supports DVD/SVCD/VCD/CD compatibility.
Built-in SD Card Reader
▪ Allows access to digital content stored on a SD card.
Built-In USB Connector
The built-in TV tuner to receive HD ATSC
▪This function allows the reception of HD broadcasting without the addition of a set top box.
High Definition Multimedia Interface (HDMI)
▪High Definition Multimedia Interface (HDMI) is a small, user-friendly interconnect that can carry up to 5 Gbps of combined video and audio in a single cable. This system eliminates the cost, complexity and confusion of multiple cables used to connect current A/V systems.
HDTV Component Video Inputs
▪Offers the best video quality for DVD (1080i, 720p) and digital set-top-box (1080i, 720p) connections.
3D Digital Noise Reduction
▪ This function can digitally reduce image noise to provide better picture quality.
Film-Mode Detection (3:2 Reverse Pull Down)
▪This function can automatically detect content derived from film and adjust the interlacer’s frame matching to provide a more natural-looking, clearer image of the moving picture.
6
|
|
|
Chapter 1 Introducing the LCD TV |
Package Contents |
|
||
|
|
||
|
|
|
|
Make sure all of the following contents are included. |
|
|
|
|
LCD TV |
Bottom Stand / |
|
|
|
Screw Driver and Screws (4) |
|
ENGLISH
Remote Control/ |
VIDEO Cable |
Component Cable |
||
AAA Batteries x 2 |
|
|
||
SET UP |
|
|
|
|
TV |
CAB/ |
|
|
|
SAT DVD AUX |
|
|
||
|
SLEEP |
|
|
|
|
DVDMENU |
|
|
|
VOL |
|
CH |
|
|
MUTE |
ASPECT |
LAST |
|
|
|
LIVE TV |
|
|
|
GUIDE |
PIP |
MENU |
|
|
|
OK |
|
|
|
INFO |
CC |
EXIT |
|
|
|
DVR |
|
|
|
1 |
2 |
3 |
|
|
4 |
5 |
6 |
|
|
7 |
8 |
9 |
|
|
INPUT |
0 |
ENTER |
|
|
Power Cord |
|
|
AUDIO Cable |
Warranty Card |
User’s Manual |
Quick Start Guide |
Stand Assembly Guide |
These items are all you need to set up and operate the LCD TV in its basic configuration.
Make sure all of the above contents are included in the package. If you are missing any items, please contact the Polaroid customer service department.
7
Chapter 1 Introducing the LCD TV
Setting Up Your LCD TV
How to install the TV Stand
Read all instructions before continuing with the stand installation.
Attach the Stand the TV with the bottom foam packaging material still attached.
a.Lift foam packaging material from the top of the LCD out of the box.
b.Lift LCD out of the box, with the bottom foam packaging material still attached, and place onto a stable surface.
a |
|
b |
|
Stand |
Shipping box |
Protective bag |
|
Table |
|||
|
|
c.Remove protective bag from LCD unit, but DO NOT remove the bottom foam packaging material from the TV.
d.Locate the place on the back of the TV to attach the stand. Secure the stand to the LCD with all six screws.
c |
Unit |
|
Table |
Stand
Packaging material
d
Unit
Table
Screws
Stand
Packaging material
8
Chapter 1 Introducing the LCD TV
How to remove the TV Stand
If you prefer to mount your new Polaroid TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (sold separately).
Verify your TV’s model and be sure to use the wall mounting kit specified for your TV model only. Contact your technician for assistance when installing the wall mounting kit.
To prevent damaging the surface of the LCD TV, place the TV on a soft cloth.
Soft cloth
Remove the screws of the table stand and detach the table stand from the TV.
Soft cloth
Table stand
Align the holes on the wall mounting hook units with the corresponding holes on the rear of the TV and fasten four screws.
4 screws (supplied with the wall mount kit)
Wall mounting hook unit (supplied with the wall mount kit)
Soft cloth
9
ENGLISH
Chapter 1 Introducing the LCD TV
How to setup the TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer to page18-22).
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert the 2 batteries supplied in remote control.
Step1 Slide the back cover up to open the battery compartment of the remote control.
Step2 Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner etc.) on the remote, as it may suffer damage.
Connect other an external AV device (refer to page23-31).
10
Chapter 1 Introducing the LCD TV
Your LCD TV
Front/Right Side View and Controls
LED
The LED light indicates when the LCD TV is activated.
IR
Infrared
Receiver
VOLUME+-
Adjusts the volume up and down. Selects the mainmenu item and change values for items when in the OSD mode.
CHANNEL▲▼
Scans up and down through channels. Selects submenu item when in the OSD mode.
MENU
Press once to display the OSD (on screen display), press again to turn the OSD off.
INPUT
Chooses from different input signal sources.
Turns the LCD TV on and into standby mode.
11
ENGLISH
Chapter 1 Introducing the LCD TV
Right Side View and Controls
VIDEO
L
R
VIDEO1 IN
VIDEO1 IN
Connects to the composite Video and Audio output jacks on external video equipment.
HEADPHONE
Connects to the external headphone for private listening.
USB
Allows access to digital content stored on a USB storage : MP4/JPEG
BUILT-IN SD CARD READER
Allows access to digital content stored on a
SD card : JPEG/MPEG1/MPEG2/MPEG4
/ 
PLAY/PAUSE
/
STOP/EJECT
SLOT-TYPE DVD PLAYER
Any of the following disc types can
be played on the DVD player: DVD/VCD/CD/CD- R/CD-RW/JPEG/KODAK PICTURE CD/WMA/ DVD+R/RW/DVD-R/RW/MPEG-4
.
12
Chapter 1 Introducing the LCD TV
Rear View and Jacks
ENGLISH
VIDEO2 IN
Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment.
HDMI1 IN/HDMI2 IN
Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced, high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for DVI connection.
S-VIDEO IN
Connects to the S-VIDEO and AUDIO(L/R) output jacks on external video equipment.
VGA IN
Connects the PC, or other AV equipment with VGA and AUDIO(L/R) output jacks.
YPbPr1 IN/YPbPr2 IN
Connects to the DVD player, Digital Set-Top-Box, or other AV equipment with component(YPbPr) video and audio output jacks.
AUDIO OUT-STEREO
Connects to the AUDIO(L/R) input jacks on AV equipment.
AUDIO OUT-DIGITAL-OPTICAL/COAXIAL
Connects to the DIGITAL AUDIO jack on the digital/standard 5.1 audio system.
HDTV/TV AIR/CABLE
Connects RF input from VHF/UHF antenna or cable to receive high/standard definition television.
AC IN
Connects to the AC power cord.
13
Chapter 1 Introducing the LCD TV
Your Remote Control
This package includes a Polaroid remote that enables control of up to four devices.
To select a device, simply select one of the following device mode controls: TV, CBL/SAT, DVD/VCR, or AUDIO.
2
3
5
6
8
9
11
SET UP |
|
|
1 |
TV |
CAB/ |
DVD |
AUX |
SAT |
|||
|
SLEEP |
4 |
|
|
DVDMENU |
|
|
VOL |
|
CH PAGE |
7 |
MUTE |
ASPECT |
LAST |
10 |
|
LIVE TV |
|
|
GUIDE |
PIP |
MENU |
|
|
OK |
|
|
INFO |
CC |
EXIT |
|
|
DVR |
|
|
1 |
2 |
3 |
|
|
ABC |
DEF |
|
4 |
5 |
6 |
|
GHI |
JKL |
MNO |
|
7 |
8 |
9 |
|
PQRS |
TUV |
WXYZ |
|
INPUT |
0 |
ENTER |
|
. |
|
1 |
|
|
|
Turns the LCD TV on and off |
|
SET UP |
|||||
2 |
Remote control universal code setup. |
||||
|
|
|
|
For more information on setting up your |
|
|
|
|
|
remote control, please see the |
|
|
|
|
|
“Programming Your Remote Control” |
|
|
|
|
|
section (refer to page 56) |
|
3 |
TV |
Controls the LCD TV/Built-in DVD/USB / |
|||
|
|
|
|
SD card reader. |
|
|
CAB/SAT |
Controls Cable Converter or Satellite |
|||
|
|
|
|
Receiver |
|
|
DVD |
Controls DVD player or Video player |
|||
|
AUX |
Controls Audio Amplifier |
|||
24 |
SLEEP |
Cycles through the LCD TV sleep time: |
|||
|
|
|
|
OFF/10/20/30/40/50/60/90/120 mins |
|
5► Other device function keys
6VOL+- Increases and decreases volume
7CH▲▼ Change channel up and down
8ASPECT Cycles through Wide mode settings: NORMAL/FULL/WIDE/ZOOM
9MUTE Pressing once mutes audio. Pressing again restores audio
10 LAST Returns to previously selected channel
11 GUIDE In TV mode, pressing GUIDE displays the Program Guide on the screen
14
SET UP
TV |
CAB/ |
DVD |
AUX |
SAT |
SLEEP
DVDMENU
VOL |
|
CH PAGE |
MUTE |
ASPECT |
LAST |
|
LIVE TV |
|
GUIDE |
PIP |
MENU |
14 |
|
OK |
|
15 |
INFO |
CC |
EXIT |
|
|||
16 |
|
DVR |
|
|
|
|
|
|
1 |
2 |
3 |
|
|
ABC |
DEF |
18 |
4 |
5 |
6 |
GHI |
JKL |
MNO |
|
|
7 |
8 |
9 |
|
PQRS |
TUV |
WXYZ |
19 |
INPUT |
0 |
ENTER |
. |
|
|
|
|
Chapter 1 Introducing the LCD TV |
|
|
|
|
|
|
|
|
|
|
12 |
PIP |
Other device function key |
||
13 |
MENU |
Displays the OSD menu on the |
||
|
|
|
|
screen. |
14 |
◄ ►▲▼,OK |
Cycles through OSD options and selects |
||
|
|
|
|
individual menu items. OK confirms option |
|
|
|
|
settings |
|
|
OK |
In TV mode, pressing OK to display a |
|
|
|
|
|
channel list |
15 |
INFO |
Displays information on the LCD TV |
||
|
|
|
|
screen such as input source, channel, |
|
|
|
|
program title. |
12 |
|
CC |
|
|
16 |
Cycles through the Closed Caption: |
|||
13 |
|
|
|
Analog Closed Caption:OFF/CC1/ |
|
|
|
|
CC2/CC3/CC4/Text1/Text2/Text3/ |
|
|
|
|
Test4 |
|
|
|
|
Digital Closed Caption: |
|
|
|
|
Allow to set the digital closed caption |
17 |
EXIT |
Exits the OSD menu |
||
17 |
|
|
|
|
18 |
0-9/ENTER Pressing a number selects a channel. |
|||
|
|
|
|
Following selection, pressing ENTER |
|
|
|
|
activates the channel, or channel |
|
|
|
|
activates automatically in 3 seconds |
19 |
INPUT |
Pressing INPUT to display a source |
||
|
|
|
|
list, use ▲▼ to select the video |
|
|
|
|
equipment connected to the video |
|
|
|
|
inputs of your LCD TV: |
Input Source
TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
DVD
USB
CARD READER
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)
▪In TV mode, use with 0-9 and ENTER buttons to select a digital channels.
Effective range:
The remote can control the LCD TV from up to 5m away, if pointed directly at the receiver.
15
ENGLISH
Chapter 1 Introducing the LCD TV
Controlling The Built-in DVD
Press the TV button once to activate the built-in DVD control keys, the following functions are preset to operate the built-in DVD:
|
|
|
|
|
|
|
1 |
DVD MENU |
|
SET UP |
|
|
|
|
|
|
|
|
TV |
CAB/ |
DVD |
AUX |
|
2 |
|
|
|
SAT |
|
1 |
|
||||
|
|
SLEEP |
|
|
|
|||
2 |
|
|
|
|
|
|||
|
DVDMENU |
|
|
3 |
|
|||
|
|
|
|
|
|
4 |
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
|
|
7 |
VOL |
|
|
CH PAGE |
|
5 |
|
|
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
9 |
MUTE |
ASPECT |
LAST |
|
6 |
|
||
|
|
LIVE TV |
|
|
|
|
||
10 |
GUIDE |
|
|
PIP |
MENU |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 |
VOL+- |
11 |
|
|
OK |
|
|
8 |
ASPECT |
|
12 |
|
|
|
|
|
|
9 |
MUTE |
INFO |
|
|
CC |
EXIT |
13 |
|
|
|
|
|
|
|
|
||||
DVR
Press to display the menu of a DVD disc.
While playing, press to jump to the previous/next chapter or track.
Pressing this button during playback advances/reviews playback; speed increases with each pressing: 2x/4x/8x/16x/32x
Normal playback.
While playing, press this button to stop playing.
While playing, press this button once to pause playing, press once again to resume playing.
Increases and decreases volume.
Cycles through Wide mode settings: NORMAL/FULL/WIDE/ZOOM
Pressing once mutes audio. Pressing again restores audio.
1 |
2 |
3 |
|
ABC |
DEF |
4 |
5 |
6 |
GHI |
JKL |
MNO |
7 |
8 |
9 |
PQRS |
TUV |
WXYZ |
INPUT |
0 |
ENTER |
. |
10 |
GUIDE |
Displays the Built-in DVD Setup Menu |
|
|
on the screen. |
11 |
◄ ►▲▼,OK |
Cycles through Built-in DVD OSD |
|
|
options and selects individual menu |
|
|
items. OK confirms option settings |
12 |
INFO |
Displays current information on screen |
|
|
during playback. |
13 |
EXIT |
Press this button to eject the disc. |
16
Chapter 1 Introducing the LCD TV
Controlling The USB Storage and SD Card Reader
Press the TV button once to activate the built-in USB and SD Card Reader control keys, the following functions are preset to operate the USB Storage and SD Card: For more information on setting up your USB storagnd adn card reader, please see the “Using the USB Storage and SD Card Reader” section.
2
4
5
6
7
8
9
SET UP
TV |
CAB/ |
DVD |
AUX |
SAT |
|||
|
SLEEP |
1 |
|
|
|
||
|
DVDMENU |
|
|
|
|
|
3 |
|
VOL |
|
CH PAGE |
MUTE |
ASPECT |
LAST |
|
LIVE TV |
|
GUIDE |
PIP |
MENU |
|
OK |
|
INFO |
CC |
EXIT |
|
DVR |
|
1 |
2 |
3 |
|
ABC |
DEF |
4 |
5 |
6 |
GHI |
JKL |
MNO |
7 |
8 |
9 |
PQRS |
TUV |
WXYZ |
INPUT |
0 |
ENTER |
. |
1DVD MENU
2
3
4
5
Press to display FILE MENU.
Press to go to the next or previous image.
Normal playback.
Press to display the thumbnail album.
While Slide show, press this button once to pause playing, press once again to resume playing.
6 |
VOL+- |
Increases and decreases volume. |
7 |
ASPECT |
Cycles through Wide mode settings: |
|
|
NORMAL/FULL/WIDE/ZOOM |
8 |
MUTE |
Pressing once mutes audio. Pressing |
|
|
again restores audio. |
9 |
◄ ►▲▼,OK |
In FILE MENU and thumbnail album, |
|
|
Press to move the highlight bar to a file, |
|
|
then press OK to confirm the selected |
|
|
file. |
|
►▼ |
While image displaying, press to rotate |
|
|
an image 90 degrees in a clockwise or |
|
|
counterclockwise. |
17
ENGLISH
Chapter 2 Installing the LCD TV
Chapter 2
Installing the LCD TV
Refer to the owner’s manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed.
Connecting a TV Cable or an Antenna
Antenna Connection
The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connection that is provided with the various antenna systems.
■A 75-ohm system is generally a round cable (not included) with F- type connector that can easily be attached to a terminal without tools.
F-type connector
75-ohm coaxial cable (round)
■A 300-ohm system is a flat twin-lead cable (not included) that can be attached to a 75-ohm terminal through a 300-75-ohm adapter (not included).
300-ohm twin-lead cable (flat)
18
Chapter 2 Installing the LCD TV
Use one of the following two diagrams when connecting an outdoor antenna.
A:Shows how to use a VHF/UHF combination outdoor antenna.
B:Shows how to use a separate VHF and/or UHF outdoor antenna.
A. Combination VHF/UHF antenna
VHF/UHF
Antenna
300/75-ohm adapter
(not included)
VHF/UHF
Antenna 300-ohm twin-
lead cable
75-ohm coaxial cable
B. Separate VHF and/or UHF antennas
|
|
UHF |
|
|
Antenna |
Combiner |
300-ohm twin- |
|
(not included) |
|
|
lead cable |
|
|
OUT IN |
75-ohm |
|
|
VHF |
|
|
coaxial cable |
Antenna |
|
300-ohm twin- |
|
|
lead cable |
|
19
ENGLISH
Chapter 2 Installing the LCD TV
Cable TV (CATV) Connection
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible. Use of this TV for other than private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcast/cable company, and/ or program owner.
■A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, connect the 75ohm cable into the ANT. terminal.
■Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company. One possible method of connecting the converter/descrambler provided by your cable TV company is shown in the diagram below.
RF switch (not included)
|
A |
2 set signal |
|
|
|
splitter |
|
||
OUT |
IN |
Cable TV Line |
||
(not included) |
||||
|
B |
|
|
Cable TV converter/ |
VHF/UHF IN |
descrambler |
(not included) |
■ The RF switch (not included) is required to provide two inputs (A and B). Setting the RF switch to position A allows viewing of all unscrambled channels by using the TV channel keys.
■Setting the RF switch to position B allows viewing of all scrambled channels via the converter/descrambler by using the converter channel keys.
20
Loading...