Loading...Polar IrDA USB 2.0 Adapter and Bridge Driver
User Manual
1. General
Polar IrDA Adapter is designed for infrarred data transfer between Polar heart rate monitors and other infrared products. No other use is intended or implied.
To use the Polar IrDA 2.0 Adapter and IrDA 2.0 Bridge Driver you need Windows® 98, Windows® ME, Windows® 2000 or Windows® XP Operations System on your computer. Make sure you have also updated to the latest Service Pack of Microsoft Windows®.
2. Driver Installation
We recommend you start by installing the USB 2.0 IrDA Bridge Driver.
The Driver installation will start automatically when you select OK.
However, if it does not, open the CD Driver IR721 and select Autorun. On Windows Operation System, select folder WinDriver and setup.exe file.
The instructions from here on only work under Windows Operation System.
In automatic installation the following popup screen appears briefly indicating the installation has started:
2. Driver Installation
Click Next to continue:
2. Driver Installation
To select a folder where setup will install files click Browse or to accept the suggested folder, click
Next:
2. Driver Installation
USB 2.0 IrDA Bridge Driver is being installed:
2. Driver Installation
If you are using the Windows XP Operating System, a warning sign will pop up indicating that the software has not passed Windows Logo testing. Click Continue Anyway to proceed:
2. Driver Installation
Click Finish to complete USB 2.0 IrDA Bridge Driver installation:
2. Driver Installation
3. Hardware Installation
Plug in the Polar IRDA USB 2.0 Adapter to the USB port of your computer. You will either
a) see a few pop-up screens momentarily as the device is being recognized (no user intervention required) OR
Loading...