|
1 |
Headset |
||
Savi® W740-M |
Customize and Charge |
|||
1 |
Connect battery. |
|||
|
Multi-Device Wireless
Headset System
2 Choose headset wearing style and use fit kit to assemble.
Over-the-ear OR Over-the-head OR Behind-the-head 3 Attach charge cradle to base.
Guía de inicio rápido
Guide de démarrage rapide
Guia de Início Rápido
quick start guide
VIDEO GUIDE http://docs.plantronics.com/savi-700
4Plug one end of power supply into power jack on back of the base and other end into working power outlet.
1 Volume/mute/flash button
Increase volume |
Short press up* |
|
Decrease volume |
Short press down* |
|
Mute |
Short press in |
|
Flash |
While on call, long press (1.5 seconds) up or down, will put |
|
call on hold and answer another. |
||
|
|
|
2 Call control button |
|
|
Answer/end call |
Short press |
NOTE * If headset is worn on left, do opposite.
CAUTION For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit plantronics.com/healthandsafety.
Please refer to the separate safety instructions for important product safety information prior to installation or use of the product.
Savi W740 has a WO2 base and a WH500 headset. |
||
Savi W740/W740S has a WO2/WO2S base and a WH500/ |
||
WH500S headset. |
86111-05 (04.11) |
|
|
||
|
|
|
|
|
|
|
|
|
5 To charge, dock headset in base, minimum of 20 minutes.
NOTE This product has a replaceable battery. Use only the battery type supplied by Plantronics.
2 Desk Phone
Connect and Call
1Choose desk phone setup A, B, or C and connect cables.
A Desk phone (standard)
USE
BDesk phone + HL10 lifter (sold separately)
See user guide at plantronics.com/accessories
USE
CDesk phone + EHS cable (sold separately)
See user guide at plantronics.com/accessories
USE
2While wearing headset, short press base desk phone button.
NOTE If you don't have remote call control through a lifter (HL10) or cable (EHS), manually remove desk phone handset before each call.
3If you do not hear a dial tone, open side panel and adjust middle configuration switch (A–G) until you do. Default setting A works for majority of desk phones.
4Dial test call from desk phone.
5End call by pressing headset call control button.
3 Mobile
Connect and Call
1Press down and hold Bluetooth pairing button (4 seconds) on Savi base until indicator LED flashes red and blue.
2Place Bluetooth mobile phone into search mode. Select SAVI 7xx from the list of found devices.
3If prompted by mobile phone, type 0000 as passcode.
Bluetooth indicator LED on base will turn solid blue when base has an active connection with mobile phone.
4 Computer
Connect and Call
1 Connect USB cable.
2While wearing headset, short press base computer talk button.
3Dial test call from computer softphone.
4End call by pressing headset call control button.
4While wearing headset, short press base mobile button.
5Dial test call from mobile phone.
6End call by pressing headset call control button.
NEED MORE HELP?
Technical support plantronics.com/support
Online user guide http://docs.plantronics.com/savi-700
Online user guide
http://docs.plantronics.com/savi-700