Plantronics W710A, W720A User Manual

0 (0)
Plantronics W710A, W720A User Manual

Savi® W710A

Savi® W720A

Multi-Device Wireless

Headset System

LYNSTART

Kurzanleitung

Guía de inicio rápido

quick start guide

VIDEO GUIDE http://docs.plantronics.com/savi-700

1 Headset

Customise and charge

1 Attach charging cradle to base.

2Plug one end of power supply into power jack on back of the base and other end into working power outlet.

3 To charge, dock headset in base, minimum of 20 minutes.

2 Desk phone

Connect and call

1Choose desk phone setup A, B or C and connect cables.

A Desk phone (standard)

USE

BDesk phone + HL10 lifter (sold separately)

See user guide at plantronics.com/accessories

USE

CDesk phone + EHS cable (sold separately)

See user guide at plantronics.com/accessories

USE

2While wearing headset, short press base desk phone button.

REMARQUENOTE If you don’tIf youhavedon'tremotehave remotecall controlcall contthrolthrougha liftera lifter(HL10)(HL10)or orcablecable(EHS),(EHS),manuallyremovedeskphonehandset beforeeachcall. .

3If you do not hear a dial tone, open side panel and adjust middle configuration switch (A–G) until you do. Default setting A works for majority of desk phones.

Mobile

Computer

3 Connect and call

4 Connect and call

1 Press down and hold Bluetooth pairing button (4 seconds) on Savi

1 Connect USB cable.

base until indicator LED flashes red and blue.

 

2 Place Bluetooth mobile phone into search mode. Select SAVI 7xx from

the list of found devices.

2 Load Plantronics software by visiting plantronics.com/software and

click on download button.

 

 

3 While wearing headset, short press base computer button.

3If prompted by mobile phone, type 0000 as passcode.

Bluetooth indicator LED on base will turn solid blue when base has an

active connection with mobile phone.

4

Dial test call from computer softphone.

 

5

End call by pressing headset call control button.

4While wearing headset, short press base mobile button.

5Dial test call from mobile phone.

6End call by pressing headset call control button.

1 Decrease volume

Short press –

2 Answer/end call

Short press

3 Mute Short press

4 Increase volume

Short press +

5 Flash While on call, long press volume up + or volume down – for 1.5 seconds, will put call on hold and answer another.

WARNINGS For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss.

Always listen at moderate levels. For more information on headsets and hearing, visit plantronics.com/healthandsafety.

Please refer to the separate safety instructions for important product safety information prior to installation or use of the product.

Savii W710A/W720A710/W720 hashas aWO2WO2AbasebaseandandWH300A//WH350a

WH350A headset.

86106-02 (04.11)

headset.

 

 

 

 

 

 

 

 

 

 

4Dial test call from desk phone.

5End call by pressing headset call control button.

NEED MORE HELP?

Technical support plantronics.com/support

Online user guide http://docs.plantronics.com/savi-700

NEED MORE HELP?

Product support

plantronics.com/support

Online user guide

http://docs.plantronics.com/savi-700

Loading...