LEARN MORE
Voyager® PRO HD
TAKE A GOOD LOOK
CALL BUTTON
•Take a call or end it (1 tap)
•Redial (2 taps)
•Initiate phone’s voice-dialing
(2-second press until tone heard)
•Reconnect lost connection (1 tap)
•Transfer audio to/from headset
(1-second press while on a call)
•Dial Plantronics VocalystTM voice and text service (3 taps - if outside USA, see Customize section)
POWER BUTTON
•On or off (2-second press)
•Battery level voice alerts (1 tap)
•Activate pairing after initial set up
(press until LED flashes red/blue)
Micro USB Charging Port
•With AC charger:
90 minutes for full charge
•Fully charge before first use
•Best performance when fully charged
VOLUME/MUTE BUTTONS
•Volume: up/down (tap + or – buttons per level change)
•Mute during a call: on/off (1-second press of both + and – buttons)
•Music or audio: pause/play (1-second press of both + and – buttons)
LED
•Charging (solid red)
•Battery status (1-6 hrs left = 1 red flash, low = 2 red flashes, critically low = 3 red flashes)
•Missed call (3 purple flashes, repeats for 5 minutes or until canceled by tapping Call button)
•Pairing mode (repeating blue/red flashes)
Be safe! Please read the safety guide before using your new headset.
CONNECT TO YOUR PHONE
PLT_VoyagerPRO
Simplify the Set Up
If you have an Android™ smartphone, download the Plantronics MyHeadset™ app from the Android Market place and let the app finish the pairing process.
For other phones, simply follow these “Ready, Set, Connect” instructions.
1. READY
First Time, Right Out of the Box:
Turn on the headset. The LED flashes red/blue to indicate pairing mode.
Pair New or Second Phone:
Turn on headset. Press Power button until the LED flashes red/ blue.
2. SET
Activate the Bluetooth feature on your phone, then get phone to add / search / discover new Bluetooth devices.
Phones Have Different Menus to Select From, For Example: iPhone: Settings > General > Bluetooth > On (starts the search for devices)
BlackBerry® smartphone: Settings/ options > Bluetooth: On > Search for devices
Android™: Settings>Wireless & Networks>Bluetooth: On>Scan for devices
3. CONNECT
Select “PLT_VoyagerPro” from the list of Bluetooth devices shown on your phone.
If phone asks for a passcode, enter four zeros (0000). You may see
**** on screen.
Some phones also ask to confirm headset connection after pairing. Headset LED will stop flashing red/ blue once successfully paired/ connected.
You can now make a call using your phone’s keypad or voicedialing feature.