LEARN MORE
Savor™ M1100™
Bluetooth® Headset
TAKE A GOOD LOOK
CALL BUTTON
•Take a call or end it (1 tap)
•Redial (2 taps)
•Reconnect lost connection (1 tap)
•Activate pairing after initial set up
(press until LED flashes blue/red)
•Transfer a call to/from headset
(1-second press during call)
POWER SWITCH
•On (slide to reveal black)
•Off (slide to reveal red)
VOICE RECOGNITION BUTTON
•Voice Recognition (VR) commands
(Tap VR button, say a command within 10 seconds. See Voice Commands for commands list.)
•Initiate phone’s voice-dialing
(2-taps then tone heard)
MICRO USB CHARGING PORT
• With AC charger:
20 minutes (1 hour talk time) Less than 2 hours (full charge)
• Best performance when fully charged
VOLUME/MUTE BUTTON
• Volume up/down (1 tap per level change)
• Mute: on/off (1-second press)
LED
• Charging (Solid red. No light when fully charged)
• Low battery (2 red flashes, 2 tones and voice alert)
• Critically low (3 red flashes, 3 tones and voice alert)
Be safe! Please read the safety guide before using your new headset.
CONNECT TO YOUR PHONE
“Pairing” connects your headset to your phone. “Multipoint” technology lets you use this headset with two phones.
1. READY
Activate the Bluetooth feature on your phone, then use the phone’s settings to add/search/discover new Bluetooth devices.
iPhone:
Settings > General > Bluetooth > On
(starts the search for devices)
BlackBerry® smartphone:
Settings/options > Bluetooth: On > Search for devices
VIDEO TUTORIAL IN USA: www.plantronics.com/pairing
2. SET
First Time:
With headset turned off, activate Bluetooth pairing mode by sliding Power switch on. The LED flashes blue/red to indicate pairing mode.
Pairing New Phone/
Reconnecting Original:
Turn on the headset then press and hold the Call button until the LED flashes blue/red.
PLT_M1100
3. CONNECT
Select “PLT_M1100” from the list of Bluetooth devices shown on your phone.
If phone asks for a passcode, enter four zeros (0000). You may see
**** on screen.
Some phones also ask to confirm headset connection after pairing.
Headset LED will stop flashing blue/red once your phone and headset are successfully paired/ connected.
FIND YOUR GROOVE
The loop of the gel eartip tucks into the back curve of your ear for a stable fit.
Try on the headset. The eartip is positioned to suit most people, but you may want to rotate it to best fit your left or right ear.
The gel eartip and speaker click into matching grooves so the eartip doesn’t move out of place during use.
The loop on the gel eartip should point away from the headset. (Do not rotate the eartip too far.)
For Left Ear
For Right Ear