LEARN MORE
M100™ Bluetooth® Headset
TAKE A GOOD LOOK
CALL BUTTON
•Take a call or end it (1 tap)
•Redial (2 taps)
•Initiate phone’s voice-dialing
(2-seccond press until tone heard)
•Reconnect lost connection (1 tap)
•Activate pairing after initial set up
(press until LED flashes red/blue)
•Activate multipoint (press while powering on)
•Transfer a call to/from headset
(1-second press while on a call)
POWER SWITCH
•On (slide to reveal black)
•Off (slide to reveal red)
MICRO USB CHARGING PORT
•With AC charger:
30 minutes (2 hours talk time)
90 minutes (full charge)
•Best performance when fully charged
VOLUME/MUTE BUTTON
• Min-Lo-Med-Hi-Max
(1 tap per level change)
• Mute: on/off (1-second press)
LED
•Charging (solid red)
•Fully charged (solid blue)
• Low battery (2 red flashes, 2 tones)
•Critically low (3 red flashes, 3 tones)
•Multipoint (on=2 blue flashes, and off=1 blue flash)
Be safe! Please read the safety guide before using your new headset.
CONNECT TO YOUR PHONE
“Pairing” connects your headset to your phone. “Multipoint” lets you use this headset with two phones. (Activate this feature before pairing your second phone.)
1. READY
Activate the Bluetooth feature on your phone, then use the phone’s settings to add/search/discover new Bluetooth devices.
iPhone: Settings > General > Bluetooth>On
(starts the search for devices)
BlackBerry® smartphone: Settings/ options > Bluetooth: On >
Search for devices
VIDEO TUTORIAL IN USA: www.plantronics.com/pairing
2. SET
First Time:
With headset turned off, activate Bluetooth pairing mode by sliding Power switch on. The LED flashes red/blue to indicate pairing mode.
Activate Multipoint:
While pressing the Call button, turn on the headset and keep pressing the Call button until LED flashes blue twice. (Repeat to deactivate.)
Pairing New Phone/
Reconnecting Original:
Turn on the headset then press and hold the Call button until the LED flashes red/blue.
3. CONNECT
Select “1xxPlantronics” from the list of Bluetooth devices shown on your phone.
If phone asks for a passcode, enter four zeros (0000). You may see
**** on screen.
Some phones also ask to confirm headset connection after pairing.
Headset LED will stop flashing red/ blue once your phone and headset are successfully paired/connected.