LEARN MORE
K100™ Bluetooth® In-car Speakerphone
TAKE A GOOD LOOK
MULTI-FUNCTION BUTTON
•Power on or off (3- to 4-second press)
•Take a call or end it (1 tap)
•Redial (2 taps)
•Transfer audio to or from phone during call (3-second press)
•Reject a call (press and hold until you hear a single tone)
•Initiate phone’s voice-dialing
(2-second press until second tone is heard)
•Activate manual pairing (with power off, press and hold until LED flashes red/blue)
•Reconnect (1 tap)
•Enable/Disable Missed Call Indicator (1 tap)
FM BUTTON
•FM transmit on or off (1 tap)
•Find FM channel (press and hold until station option is announced)
MICROPHONES
- +
LED
•Charging (solid red)
•Powering on or off (2 blue or red flashes)
•FM transmission (2 purple flashes)
•Missed call (1 purple flash)
•Pairing mode (red/blue flashes)
VOLUME WHEEL
•Increase volume (rotate clockwise)
•Decrease volume (rotate counterclockwise)
MUTE BUTTON
•Mute on or off (1 tap)
•Night mode: LED on or off
(2-second press until tone is heard)
MICRO USB CHARGING PORT
•With micro USB or car charger:
2.5 hours (100% charge)
•Best performance when fully charged
Be safe! Please read the safety guide before using your new speakerphone.
CONNECT TO YOUR PHONE
“Pairing” is the process that connects the speakerphone to your phone. You can pair more phones but can have only one active connection at a time.
1. READY
Activate the Bluetooth feature on your phone, then use the phone’s settings to add/search/discover new Bluetooth devices.
iPhone: Settings > General > Bluetooth > On
(starts the search for devices)
BlackBerry® smartphone:
Settings/options > Bluetooth: On > Search for devices
VIDEO TUTORIAL FOR USA: www.plantronics.com/pairing
2. SET
First Time:
With speakerphone turned off, activate Bluetooth pairing mode by pressing and holding the Multifunction button to turn on speakerphone. The LED flashes red/blue to indicate pairing mode.
3. CONNECT
Select “PLT_K100” from the list of Bluetooth devices shown on your phone.
If the phone asks for a passcode, enter four zeros (0000). You may see **** on screen.
Some phones also ask to confirm the connection after pairing.
The speakerphone LED will stop flashing red/blue once your phone is successfully paired/connected.