WELCOME
CS60 DECT™ Wireless
Headset System
User Guide
Thank you for selecting the
CS60 DECT™ Wireless Headset
System from Plantronics.
The CS60 offers wireless, hands-free headset convenience and long range workspace mobility.
This user guide provides instructions on the installation and usage of your system.
www.plantronics.com
1
DIAGRAM KEY
7
9
8
1
11
17
10
HEADSET
23
22
21
19
20
25
24
DIAGRAMS
BASE UNIT
12
13
15
3
16
4
5
INSTALLING A REPLACEMENT BATTERY
3
UK USAGE INSTRUCTIONS
DIAGRAM KEY
BASE UNIT |
HEADSET |
||
1 |
Tx Slide Switch (A-D) |
18 |
Microphone |
2 |
Rx Slide Switch (1-4) |
19 |
Speaker |
3 |
Speak Volume Adjust UP |
20 |
Talk Button |
4 |
Speak Volume Adjust DOWN |
21 |
Listen Volume Adjust UP/DOWN |
5 |
IntelliStandTM Switch ON/OFF |
22 |
Headset Mute Switch |
6 |
Configuration Dial |
23 |
On-line Indicator |
7 |
AC Power Adapter |
24 |
Charge contacts |
8 |
AC Power Adapter Port |
25 |
Battery Door |
9Handset Cable Port
10Telephone Cable Port
11Accessory Port
12Headset Docking Cradle
13Charge contacts
14Charge Indicator
15Talk Indicator
16Power Indicator
17Handset Lifter (Optional)
IMPORTANT SAFETY INFORMATION
Please read the following instructions before use:
General:
•Operating temperature +4C to +49C
•Storage temperature +4C to +49C
•The product is suitable for indoor use only
•To reduce the risk of electric shock, explosion or fire:
•Use only the AC power adapter supplied – part number 61634-02 (Euro) or 61635-02 (UK)
•Ensure that the voltage rating (e.g. 230V 50Hz) corresponds to the local mains supply you intend to use
•Use only the correct battery type – part number – 62346-01
•Do not disassemble the product
•Keep all products, cords and cables away from operating machinery
•Avoid contact with liquids
•Connect the base unit only to a host terminal port explicitly designated for use with handsets or headsets. Connection through other ports, such as data ports or line ports, may damage the product and could constitute a fire hazard. If in doubt, please contact your supplier or the supplier of the host equipment
•If mains power fails, the base unit will switch to handset mode
Battery Safety:
•Please observe these precautions to ensure continued safety. Misuse or mistreatment may result in fire, explosion or the release of corrosive chemicals
•Battery storage temperature +4C to +49C
•Battery operating temperature +4C to +49C
4
UK
•Charge the headset battery as described in the Quickstart Guide and User Guide. Do not charge with any other AC power adapter or charger
•Do not incinerate, disassemble, bend, crush or short-circuit the battery
•Dispose of spent battery promptly and safely in accordance with local regulations. Keep battery away from children
•Exercise care when handling the battery, AC power adapter, the base and the headset. Do not short the metal contacts (on the plastic casing) with electrically conducting materials such as rings, bracelets, keys etc
•If liquid from the battery comes in contact with the eyes, skin or any other part of the body, immediately flush with fresh water and seek medical advice
•For battery replacement please refer to the diagrams on page 3 or the Quickstart Guide supplied with the product
INSTALLATION
Please install the CS60 DECT™ Wireless Headset System in accordance with the instructions detailed in the Quick Start Guide.
HEADSET/HANDSET SELECTION
Pressing the Talk Button (20) on the Headset selects Headset mode. The Talk Indicator (15) on the base unit will illuminate and the On-Line Indicator (23) on the headset will flash when in Headset mode. Both of the indicators are extinguished when in Handset mode.
PLACING A CALL USING YOUR HEADSET
To place a call using the headset, the system must be in Headset mode. Take the handset off the hook and dial in the normal way. You will then be able to talk through your headset. When the call is complete, return the telephone handset to the cradle.
Tip: By selecting Handset mode after completing your call, you will conserve the headset battery power and extend the remaining available talktime. You can achieve this by pressing the Talk Button (20) immediately on conclusion of the call.
Note: If you have installed a Plantronics Handset Lifter (17) please refer to the section “Making a call using the Lifter” on page 7.
RECEIVING A CALL USING YOUR HEADSET
When your telephone rings take the handset off the hook. Ensure that your CS60 DECT™ Wireless Headset System is already in Headset mode. You will then be able to talk through your headset. When the call is complete, return the telephone handset to the cradle.
Note: If you have installed a Plantronics Handset Lifter (17) please refer to the section “Receiving a call using the lifter” on page 7.
5