Plantronics CS60 User Manual

0 (0)

WELCOME

CS60 DECT™ Wireless

Headset System

User Guide

Thank you for selecting the

CS60 DECT™ Wireless Headset

System from Plantronics.

The CS60 offers wireless, hands-free headset convenience and long range workspace mobility.

This user guide provides instructions on the installation and usage of your system.

www.plantronics.com

1

Plantronics CS60 User Manual

DIAGRAM KEY

7

9

8

1

11

17

10

HEADSET

23

22

21

19

20

25

24

DIAGRAMS

BASE UNIT

12

13

15

3

16

4

5

INSTALLING A REPLACEMENT BATTERY

3

UK USAGE INSTRUCTIONS

DIAGRAM KEY

BASE UNIT

HEADSET

1

Tx Slide Switch (A-D)

18

Microphone

2

Rx Slide Switch (1-4)

19

Speaker

3

Speak Volume Adjust UP

20

Talk Button

4

Speak Volume Adjust DOWN

21

Listen Volume Adjust UP/DOWN

5

IntelliStandTM Switch ON/OFF

22

Headset Mute Switch

6

Configuration Dial

23

On-line Indicator

7

AC Power Adapter

24

Charge contacts

8

AC Power Adapter Port

25

Battery Door

9Handset Cable Port

10Telephone Cable Port

11Accessory Port

12Headset Docking Cradle

13Charge contacts

14Charge Indicator

15Talk Indicator

16Power Indicator

17Handset Lifter (Optional)

IMPORTANT SAFETY INFORMATION

Please read the following instructions before use:

General:

Operating temperature +4C to +49C

Storage temperature +4C to +49C

The product is suitable for indoor use only

To reduce the risk of electric shock, explosion or fire:

Use only the AC power adapter supplied – part number 61634-02 (Euro) or 61635-02 (UK)

Ensure that the voltage rating (e.g. 230V 50Hz) corresponds to the local mains supply you intend to use

Use only the correct battery type – part number – 62346-01

Do not disassemble the product

Keep all products, cords and cables away from operating machinery

Avoid contact with liquids

Connect the base unit only to a host terminal port explicitly designated for use with handsets or headsets. Connection through other ports, such as data ports or line ports, may damage the product and could constitute a fire hazard. If in doubt, please contact your supplier or the supplier of the host equipment

If mains power fails, the base unit will switch to handset mode

Battery Safety:

Please observe these precautions to ensure continued safety. Misuse or mistreatment may result in fire, explosion or the release of corrosive chemicals

Battery storage temperature +4C to +49C

Battery operating temperature +4C to +49C

4

UK

Charge the headset battery as described in the Quickstart Guide and User Guide. Do not charge with any other AC power adapter or charger

Do not incinerate, disassemble, bend, crush or short-circuit the battery

Dispose of spent battery promptly and safely in accordance with local regulations. Keep battery away from children

Exercise care when handling the battery, AC power adapter, the base and the headset. Do not short the metal contacts (on the plastic casing) with electrically conducting materials such as rings, bracelets, keys etc

If liquid from the battery comes in contact with the eyes, skin or any other part of the body, immediately flush with fresh water and seek medical advice

For battery replacement please refer to the diagrams on page 3 or the Quickstart Guide supplied with the product

INSTALLATION

Please install the CS60 DECT™ Wireless Headset System in accordance with the instructions detailed in the Quick Start Guide.

HEADSET/HANDSET SELECTION

Pressing the Talk Button (20) on the Headset selects Headset mode. The Talk Indicator (15) on the base unit will illuminate and the On-Line Indicator (23) on the headset will flash when in Headset mode. Both of the indicators are extinguished when in Handset mode.

PLACING A CALL USING YOUR HEADSET

To place a call using the headset, the system must be in Headset mode. Take the handset off the hook and dial in the normal way. You will then be able to talk through your headset. When the call is complete, return the telephone handset to the cradle.

Tip: By selecting Handset mode after completing your call, you will conserve the headset battery power and extend the remaining available talktime. You can achieve this by pressing the Talk Button (20) immediately on conclusion of the call.

Note: If you have installed a Plantronics Handset Lifter (17) please refer to the section “Making a call using the Lifter” on page 7.

RECEIVING A CALL USING YOUR HEADSET

When your telephone rings take the handset off the hook. Ensure that your CS60 DECT™ Wireless Headset System is already in Headset mode. You will then be able to talk through your headset. When the call is complete, return the telephone handset to the cradle.

Note: If you have installed a Plantronics Handset Lifter (17) please refer to the section “Receiving a call using the lifter” on page 7.

5

Loading...
+ 10 hidden pages