LEARN MORE
BackBeat™ 903+
Bluetooth® Headphones
TAKE A GOOD LOOK
CALL BUTTON |
|
• Take a call or end it (1 tap) |
|
• Redial (2 taps) |
|
• Initiate phone’s voice-dialing (2-second |
|
press until tone is heard) |
|
• Reconnect lost Bluetooth connection |
+ |
(1 tap if the headphones don’t automatically |
- |
|
|
reconnect) |
|
•Cancel missed call LED (1 tap)
•Reject a call (2-second press)
•Transfer call to/from phone
(during call, 2-second press)
•Enable/disable Online Indicator (while powered on, 2-second press Call and Volume Up buttons)
MICRO USB CHARGING PORT
•Use with the AC wall charger:
1 hour before first use
3 hours (100% charge)
•Do not use headphones while charging
VOLUME/TRACKING BUTTONS
•Volume Up/Down (1 tap per level change)
•Track Forward/Back (2-second press per track change)
•Enable/Disable OpenMic™ (3-second press Call and Volume Down buttons)
LED
•Charging (solid red)
•Fully charged (brief solid blue flash)
• Low battery (2 red flashes every
15 minutes)
•On a call (blue flash every 2 seconds)
•Missed call (3 purple flashes repeating for 5 minutes or until cancelled)
•Pairing mode (repeating red/blue flashes)
MUSIC BUTTON
•Play/Pause (1 tap)
•Bass Boost (2-second press)
•Mute Music or Call (1 tap)
•Use OpenMic™ to pause music and activate mic (1 tap)
POWER/PAIRING BUTTON
•On/Off (2-second press to turn on, 4-second press to turn off)
•Activate pairing mode after initial set up (press until red/blue LED flashes)
•Check battery level (1 tap)
Be safe! Please read the safety guide before using your new headphones.
CONNECT TO YOUR PHONE
PLT_BB903+
Pairing is a one-time process unless your phone loses the connection or you want to pair to a new phone.
1. READY
Activate the Bluetooth feature on your device, then get it to add / search for / discover new Bluetooth devices.
Phones have different menus to select from:
iPhone: Settings > General > Bluetooth > On
(starts the search for devices)
BlackBerry® smartphone:
Settings/options > Bluetooth: On > Search for devices
VIDEO TUTORIAL IN USA: www.plantronics.com/pairing
2. SET
First time, right out of the box:
With headphones turned off, activate Bluetooth pairing mode by pressing Power/Pairing button on. The LED flashes red/blue to indicate pairing mode.
Pairing new phone/reconnecting original:
With headphones turned off, press Power/Pairing button until the LED flashes red/blue.
3. CONNECT
Select “PLT_BB903+” from the list of Bluetooth devices shown on your device.
If device asks for a passcode, enter four zeros (0000). You may see
**** on screen.
Some devices also ask to confirm connection after pairing.
The headphone’s LED will stop flashing red/blue once successfully paired/connected.
You can now make a call using your device’s keypad or voicedialing feature.