Plantronics 903+ User Manual

0 (0)

LEARN MORE

BackBeat903+

Bluetooth® Headphones

Plantronics 903+ User Manual

TAKE A GOOD LOOK

CALL BUTTON

 

• Take a call or end it (1 tap)

 

• Redial (2 taps)

 

• Initiate phone’s voice-dialing (2-second

 

press until tone is heard)

 

• Reconnect lost Bluetooth connection

+

(1 tap if the headphones don’t automatically

-

 

reconnect)

 

Cancel missed call LED (1 tap)

Reject a call (2-second press)

Transfer call to/from phone

(during call, 2-second press)

Enable/disable on-a-call LED (while powered on, 2-second press Call and Volume up buttons)

MICRO USB CHARGING PORT

Use with the AC charger:

1 hour before first use

3 hours (100% charge)

Do not use headphones while charging

VOLUME/TRACKING BUTTONS

Volume up/down (1 tap per level change)

Track forward/back (2-second press per track change)

Enable/disable OpenMic(3-second press Call and Volume down buttons)

LED

Charging (solid red)

Fully charged (brief solid blue flash)

• Low battery (2 red flashes every

15 minutes)

On a call (blue flash every 2 seconds while on a call)

Missed call (3 purple flashes repeating for 5 minutes or until cancelled)

Pairing mode (repeating red/blue flashes)

MUSIC BUTTON

Play/pause (1 tap)

Bass boost (2-second press)

Mute music or call (1 tap)

Use OpenMicto pause music and activate mic (1 tap)

POWER/PAIRING BUTTON

On/off (2-second press to turn on, 4-second press to turn off)

Activate pairing mode after initial set up (press until red/blue LED flashes)

Check battery level (1 tap)

Be safe! Please read the safety guide for important safety, charging, battery and regulatory information before using your new headphones.

2

CONNECT TO YOUR PHONE

PLT_BB903+

“Pairing” connects your headphones to your phone. It is a one-time process unless your phone loses the connection or you want to pair to a new phone.

1. READY

Activate the Bluetooth feature on your device, then get it to add / search for / discover new Bluetooth devices.

Phones have different menus to select from:

iPhone: Settings > General > Bluetooth > On

(starts the search for devices)

BlackBerry® smartphone:

Settings/options > Bluetooth: On > Search for devices

2. SET

First time, right out of the box:

With headphones turned off, activate Bluetooth pairing mode by pressing Power/Pairing button for 2 seconds. The LED flashes red/blue to indicate pairing mode.

Pairing new phone/reconnecting original:

With headphones turned off, press Power/Pairing button until the LED flashes red/blue.

3. CONNECT

Select “PLT_BB903+” from the list of Bluetooth devices shown on your device.

If device asks for a passcode, enter four zeros (0000). You may see

**** on screen.

Some devices also ask to confirm connection after pairing.

The headphones’ LED will stop flashing red/blue once

successfully paired/connected.

You can now make a call using your device’s keypad or voicedialing feature.

3

Loading...
+ 6 hidden pages