UGuide
Bl |
® Headset with Digitally Enhanced S |
lear C |
rsations |
||
|
|
|
|
|
|
|
|
|
|
|
|
72448-01 (4/06)
TABLE OF CONTENTS
Package Contents & Features |
3 |
Charging |
4 |
|
|
Pairing |
6 |
Powering |
7 |
|
|
Adjusting Fit |
8 |
Using Your Headset |
9 |
|
|
Indicator Lights |
11 |
Optional Accessories |
12 |
|
|
Troubleshooting |
13 |
Product Specifications |
13 |
|
|
Technical Assistance |
14 |
Warranty |
14 |
|
|
Regulatory Notices |
15 |
|
|
WELCOME
Thank you for purchasing a Plantronics headset.
Let us provide you with the best possible service and technical support. After you review this user guide, if you need additional assistance or have any product questions, please contact:
•Plantronics Technical Assistance Center at 866-363-BLUE (2583)
•www.plantronics.com/support
REGISTER YOUR PRODUCT ONLINE
Visit www.plantronics.com/productregistration to register your product online so we can provide you with the best possible service and technical support.
PACKAGE CONTENTS & FEATURES
PLANTRONICS DISCOVERYTM 655AND665
Ind
Call control button (on/off)
Volu |
te buttons |
|
|
Mi |
|
Ear l op |
|
Soft gel ear tips |
|
|
|
small |
He |
t |
|
med |
|||
c |
ging |
||
|
|||
l |
p |
et |
DI 55ACCESSORIES
AAA battery
|
AC c ger |
M |
USB |
M |
USB-to-USB |
AAA |
c |
ger |
c |
ging cable |
|
b |
ery |
|
|
|
|
c |
ger |
|
|
|
|
DI ACCESSORIES
V |
cle |
USB charge cable |
c |
ging |
|
a |
er |
|
3
CHARGING
PLANTRONICS DISCOVERY 655
Before using, you must first charge your headset.
1 hour = minimum charge |
3 hours = full charge |
|
Option A: Using the included AC charger |
|
|
The indicator light flashes red while charging and |
A |
|
turns off when fully charged. |
|
|
1. Plug the AC charger into the base of the charging pocket and connect it to your power source.
2. Insert the headset into the charging pocket.
Option B: Using a AAA battery
One AAA battery recharges the headset to full capacity up to three times.
1. |
Twist the bottom of the AAA battery charger |
B |
|
counter-clockwise and release the battery holder. |
|
2. |
Insert the battery into the AAA battery holder. |
|
3. |
Slide the battery holder back into the battery |
|
|
charger and turn clockwise. |
|
4. |
Snap battery charger to charging pocket. |
|
|
Ensure that the indentation on the battery |
|
|
charger connector aligns with the shirt clip on |
|
|
the charging pocket. |
|
5. |
Insert the headset into the charging pocket. |
|
CAUTION
Only replace with a non-rechargeable AAA battery.
DISCONNECTING COMPONENTS
To separate components, grasp both the battery charger and the charging pocket with the shirt clip facing you. Bend the components back and they will snap apart.
NOTE Do not twist the components apart.
4
CHARGING
Option C: Using the Mini USB-to-USB |
C |
|
charging cable |
|
|
1. |
Snap the mini USB charger to |
|
|
the charging pocket. |
|
2. |
Use the mini USB-to-USB charging |
|
|
cable to connect the headset to your |
|
|
computer or laptop. |
|
3. |
Turn your computer or laptop on. |
|
Mini USB charger
PLANTRONICS DISCOVERY 665
Before using, you must first charge your headset.
1 hour = minimum charge |
3 hours = full charge |
Option A: Using the vehicle charging adapter. |
|
1. Snap the headset charging pocket onto the |
1. |
vehicle charging adapter as shown. |
|
2.Plug the vehicle charging adapter into vehicle power socket and adjust the charging pocket angle so that the headset is within easy reach.
CAUTION Select a mounting option that does not interfere with car controls.
3.Dock the headset into the charging pocket as shown. If power is available to the vehicle power socket, the charging pocket will flash when the headset is docked.
NOTE The headset charges only when power is supplied to the vehicle power socket.
The green indicator on the vehicle charging adapter lights when power is supplied.
Option B: Using USB charging cable
1.Use the USB charging cable to connect the headset charging pocket to your computer or laptop.
2.Turn your computer or laptop on.
2.
12Volts
3.
12 Volts
5