Pioneer RMS-V5011, RMS-V4011, RMF-V4011R, RM-V4000V User Manual

0 (0)
1
R
Notes:
• Pioneer will not be liable for any loss caused by defects
of the parts supplied other than by Pioneer.
• An damage during shipping will be compensated for
only in the case where Pioneer's specific packing mate-
rials for shipping are used.
the assembly and adjustment described in this technical
manual and the adjustment described by the system
manual of RM-V2000 have been carried out.
MULTI PROJECTION UNIT
RM-V4000V/
V5000V
PROJECTION SCREEN KIT
RMS-V4011/
V5011
PROJECTION FRAME
RMF-V4011/
V5011
PROJECTION CABINET
RMF-V4011R
Caution
This symbol refers to a hazard or unsafe
practice which can result in personal injury
or property damage.
TECHNICAL MANUAL (Ver.2.0)
PIONEER RM-V4000 / 5000
MANUAL.
This Acrobat (IE: a PDF file) version of the Pioneer RM-V4000 / 5000 manual was made from
the original digital document and scanning an existing manual. Because of this, there are many
less then perfect pages and hand written comments.
As Pioneer is constantly working towards providing the best possible documentation for our
products, there may be an improved version of this document available. Please contact your
Pioneer representative for additional information.
Josh Kairoff
Pioneer New Media Technology.
October 27, 1997.
2
CHAPTER 1. FEATURES OF PROJECTION CUBE SYSTEM .............................................................. 4
1. FEATURES OF SYSTEM ........................................................................................................................................... 4
2. FEATURES OF MULTI PROJECTION UNIT (RM-V4000V/V5000V) ........................................................................ 4
3. FEATURES OF FRAME TYPE ................................................................................................................................... 5
4. FEATURES OF CABINET TYPE ................................................................................................................................ 5
CHAPTER 2 . GENERAL SPECIFICATIONS ......................................................................................... 6
1. SPECIFICATIONS ...................................................................................................................................................... 6
(1) Multi Projection Unit (RM-V4000V/V5000V) ................................................................................................... 6
(2) Projection Screen Kit(RMS-V4011/V5011)Product Weight:11.0kg/14.0kg .................................................. 13
(3) Projection Frame (RMF-V4011/V5011)Product Weight:26.8kg/28.8kg ........................................................ 14
(4) Projection Cabinet(RMF-V4011R) .................................................................................................................. 15
(5) Projection Install Table (RM-V112/RMA-V5010) ........................................................................................... 16
(6) Munting Unit (RMA-V2050/2060) ................................................................................................................... 17
(7) Multi Video Processor(RMD-V3216/3109,RMD-V2170) ................................................................................ 18
(8) Adjustment Control Unit (RU-V107)*Option ................................................................................................ 20
(9) Projection Cabinet (RMF-V4011R) Accessories ............................................................................................ 21
2. SYSTEM DIMENSIONS .......................................................................................................................................... 22
(1) 160-inch (40-inch 4×4screens)…For RMF-V4011 ......................................................................................... 22
(2) 150-inch (50-inch 3×3screens)…For RMF-V5011 ......................................................................................... 23
(3) 160-inch (40-inch 4×4 screens)…For RMF-V4011R...................................................................................... 24
CHAPTER 3. INSTALLATION AND ASSEMBLY ............................................................................... 25
1. INSTALLATION CONDITIONS ............................................................................................................................... 25
(1) Installing Ground ............................................................................................................................................ 25
(2) Ceiling .............................................................................................................................................................. 26
(3) Front Space ..................................................................................................................................................... 26
(4) Rear Space ...................................................................................................................................................... 26
(5) Number of Units Stacked Up ......................................................................................................................... 26
(6) Prevention of Tilting ....................................................................................................................................... 26
(7) Calculating the Heat Quantity ........................................................................................................................ 27
(8) Temperature and Humidity ............................................................................................................................ 27
(9) Condensation .................................................................................................................................................. 27
(10) Visible Angle ................................................................................................................................................. 28
(11) Lighting .......................................................................................................................................................... 31
(12) Effects of Earth Magnetism .......................................................................................................................... 31
(13) Connection with a Power Supply ................................................................................................................ 32
(14) Cabes Used ................................................................................................................................................... 33
(15) Semi-outdoor Installation ............................................................................................................................ 33
(16) Precautions for Use of User-Obtained Parts .............................................................................................. 33
2. INSTALLATION AND ASSEMBLY ......................................................................................................................... 34
(1) Confirmation ................................................................................................................................................... 34
(2) Opening the Packaging .................................................................................................................................. 34
(3) Carrying the Units After Opening Packaging ............................................................................................... 39
3. PRECAUTIONS FOR TRANSPORTATION ............................................................................................................. 39
4. ASSEMBLING THE SYSTEM ................................................................................................................................. 41
(1) Assembling the Projection Frame (RMF-V4011/V5011) ............................................................................... 41
(2) Assembling the System ................................................................................................................................. 42
5. SPECIAL INSTALLATION ....................................................................................................................................... 53
(1) Wall inset ......................................................................................................................................................... 53
(2) Diagonal installation ....................................................................................................................................... 53
(3) Architrave processing .................................................................................................................................... 53
(4) Upside down installation ............................................................................................................................... 53
(5) Hanging from ceiling ...................................................................................................................................... 53
CHAPTER 4. ADJUSTMENTS ............................................................................................................ 54
1. ADJUSTMENT PREPARATIONS ........................................................................................................................... 54
(1) Wiring .............................................................................................................................................................. 54
(2) Wiring Handling .............................................................................................................................................. 54
(3) Aging ............................................................................................................................................................... 54
CONTENTS
7
Dimensions
GENERAL SPECIFICATIONS
(Fig.2-1)
9
Type
BNC connector
BNC connector
BNC connector
BNC connector
BNC connector
Slide switch
Tact switch
Tact switch
Tact switch
Tact switch
Tact switch
Tact switch
D-sub 25 PIN (Female)
Mini jack
DIN 6PIN
DIN 6PIN
D-sub 9PIN (Male)
Slide switch
BNC connector
BNC connector
BNC connector
BNC connector
BNC connector
Name
Control input terminal
Y (Luminance) input terminal
C (Color) input terminal
Video input terminal
Video output terminal
TERMINATE switch
COMBINATION switch
MULTI switch
COLOR MODE switch
INPUT switch
POWER switch
STATUS switch
RS-232C port
emote control connection ter
minal
Linked output terminal
Linked input terminal
RGB input terminal
RGB input select switch
RGB input terminal (R)
RGB input terminal
(G/composite sync)
RGB input terminal (B)
RGB input terminal
(Horizontal sync/composite
sync)
RGB input terminal (Vertical
sync)
No.
1
2
3
4
5
6
7
8
9
0
-
=
~
!
@
#
$
%
^
&
*
(
)
Function
Video input and Y/C input external switching control signal in-
put terminal
Luminance signal input terminal
Color signal input terminal
Video signal input terminal
Video input terminal 4 through-out terminal
Terminates the video input terminal 4 at 75 ohm
Turns on when linked to ABL
Turns on when used on multi screen
Switches the color temperature. 1:Normal use. 2:Re-exposure
Switches VIDEO input, Y/C input, RGB input.
Switches VIDEO input and Y/C input with the external control
signal 1 at VIDEO position
Power OFF:STANDBY (Red LED) lights up
Power ON:ON (Green LED) lights up
Accumulated duty time:Switch which displays setting states of
each switch on the screen.
RS-232C communication connector
Connected to adjusting remote control (optional)
Output terminal of ABL signal, remote control signal, and RS-
232C signal
Input terminal of ABL signal, remote control signal and RS-
232C signal
RGB signal input terminal
Switches RGB signal input terminal type
RGB signal R input terminal
RGB signal G and composite sync (Input signal G on sync) input
terminal
RGB signal B input terminal
RGB signal horizontal sync and composite sync (Only for input
signal H/V sync) input terminal
RGB signal vertical sync input terminal
GENERAL SPECIFICATIONS
• To turn off the power, use the POWER switch - of the unit, the RS-232C control, or wired remote control (optional). (If turned
off using the main POWER switch or by disconnecting the power cable from the outlet, the settings of the above 7 to -
switches and the state of the TV SYSTEM and convergence memory will not be recorded on the memory.)
Consequently when starting up or stopping the whole system by AC ON/OFF in setup conditions for a demonstration, it is
necessary to turn off the power using the above method to record each setting in the memory.
*: Counts only when the power is ON and signal has been input to the input function selected. If the main POWER switch is
turned off or the power cable is pulled out of the outlet while the power is on before one hour has passed, errors will occur
in the count.
13
148
845
(148)(1031)
(769)
630
GENERAL SPECIFICATIONS
(2) Projection Screen Kit (RMS-V4011/V5011) Product Weight : 11.0 kg/14.0kg
(Fig.2-2)
Unit:mm
The number in parentheses is
the dimentsion for RMS-V5011
Accessory
Screw rivet ........................................................................................................................... 6
14
630
(769)
845(1031)
GENERAL SPECIFICATIONS
(3) Projection Frame (RMF-V4011/V5011) Product Weight : 26.8kg/28.8kg
1201(1352)
(Fig.2-3)
Unit:mm
The number in parentheses is
the dimension for RMS-V5011
Accessories
Metal fixture (R) ................................................................................................................... 1
Metal fixture (L) .................................................................................................................... 1
Stopper ................................................................................................................................. 2
Screw M5x10 .................................................................................................................. 38+2
Screw M5x35 ........................................................................................................................ 6
Screw M5x50 ........................................................................................................................ 4
Hexagon head bolt (with washer) M8x45 .......................................................................... 8
Shield .................................................................................................................................... 1
Rivet ...................................................................................................................................... 2
18
0
0
299
15
430
314
19
16
420
GENERAL SPECIFICATIONS
Rear View
Side View
Front View
(7) Multi Video Processor (RMD-V3216/V3109, RMD-V2170)
1 Multi Video Processor (RMD-V3216/V3109)
Main Specifications of Multi Video Processor
(RMD-V3216/V3109)
Input signal
Input video signal (Can be expanded up to four systems)
2-line (RMD-V3216), 1-line (RMD-V3109) ... BNC terminal
1 Composite video signal ...........................................
....................................... 1.0 Vp-p (75ohm terminated)
2 Y/C separation signal
Y (With sync) ................................1.0Vp-p (75ohm)
C burst level ............................0.286 Vp-p (75ohm)
*1 or 2 signal format can be selected
*Only 1 has a terminate switch, throughout
Input standard sync signal .......................... BNC terminal
1 Composite sync signal ................ 0.286 to 4.0 Vp-p
2 Composite video signal
Video level ....................... 0 to 0.714 Vp-p (75ohm)
Single level ..............................0.286 Vp-p (75ohm)
*Terminate switch, throughout
RS-232C control input 25-pin D-SUB
Output signal
Output video signal
16-line (RMD-V3216), 9-line (RMD-V3109) .. BNC terminal
1 Composite sync signal ................. 1.0 Vp-p (75ohm)
2 Y/C separation signal
Y (With sync) ................................. 1.0Vp-p (75ohm)
C (With burst) Burst level ........ 0.286 Vp-p (75ohm)
*1 and 2 signal formats are output simultaneously.
(Fig.2-7)
MULTI VIDEO PROCESSOR RMD-V3216
POWER
ON
OFF
D
482.6
3 RGB signal
Green (Sync on Green) ............................... 1.0 Vp-p
SYNC ............................................................ 0.3 Vp-p
B.R ................................................................ 0.7 Vp-p
Output reference composite sync signal BNC terminal
TTL level
(Or input reference sync signal throughout)
Others
Power supply .............................. AC100 to 120V (50/60 Hz)
Power consumption .............................................................
........................... (RMD-V3216, RMD-V3109) 350W, 700VA
Operating temperature and humidity range ......................
.......................................................................... 5 °C to 35 °C
Below 85% (No condensation)
External dimensions (RMD-V3216, RMD-V3109) ...............
.................. 482.6 (Width)x420 (Depth)x314 (Height) (mm)
(Excluding handle)
Weight
RMD-V3216 ............................................................... 22.5 kg
RMD-V3109 ............................................................... 22.0 kg
Accessories
Rack mounting screw M5 .................................................. 8
Rack mounting washer ...................................................... 8
19
GENERAL SPECIFICATIONS
(Fig.2-8)
Front View
Side View
Rear View
Main Specifications of Multi Video Processor (RMD-V2170)
Input video signal ..........................................NTSC format
Input signal band ...................................... Above 4.2 MHz
Input
Video input
Input signal ...............................................................
...................... NTSC composite video signal (BNC)
Input system ................................................... 4-line
Standard input level ................... 1Vp-p (75 load)
Y/C separation
Input signal ..... NTSC Y/C separation signal (BNC)
Input system ................................................... 4-line
Standard input level ............... Y:1 Vp-p (75 load)
..................... C:286 mVp-p (75 load burst signal)
*The video input or Y/C separation input is to be
selected by the switch on the rear panel.
Reference sync signal input
Input signal ..............................Composite sync (BNC)
Standard input level .....................................................
...................................... Composite sync 0.3 to 4 Vp-p
Control input
Input signal ..... Conforms to RS-232C (25-pin, D-sub)
Output
Video output
Output signal.............................................................
....................... NTSC composite video signal (BNC)
Output system................................................16-line
Standard output level .................. 1Vp-p (75 load)
Y/C separation output
Output signal... NTSC Y/C separation signal (BNC)
Output system................................................16-line
Standard output level ............... Y1 Vp-p (75 load)
....................... C286 mVp-p (75 load, burst signal)
Test signal output
Output signal ..................................................................
............................ NTSC composite video signal (BNC)
Standard output level ....................... 1Vp-p (75 load)
Sync signal output ...............................TTL level (BNC)
Power supply voltage ...................... 100 to 120V, 50/60 Hz
Power consumption ....................................... 300W/500VA
External dimensions ........... 483 (W)x314 (H)x469 (D) mm
Weight .......................................................................... 33 kg
2 Multi Video Processor (RMD-V2170)
*Line up series of RMD-V2110 with 9 OUTPUT CIRCUITS.
20
POWER
INPUT SEL
DISP CALL
MAIN MENU
ADJ OUT
0
13
5
79
ABC
DEF
RGB
ADJ ADJ ADJ
ON/OFF ON/OFF ON/OFF
2//3
–+
46
8
2
ADJ IN
D
Î
ADJUSTMENT CONTROL UNIT
RU-V107
29
187
84
GENERAL SPECIFICATIONS
(7) Adjustment Control Unit (RU-V107)*Option
(Fig.2-9)
Accessories
AA dry battery (IEC R6P) ..................................................................................................... 2
Cable (5m) ............................................................................................................................ 3
21
GENERAL SPECIFICATIONS
(8) Projection Cabinet (RMF-V4011R) Accessories
To attach the multi-projection unit (RM-V4000V) to the conventional RM-V2000A, the RMF-V4011R accessories (metal fixtures)
are required. The following lists the required parts. For details of attaching the multi-projection unit, refer to Chapter 3. "4-
(2)Assembling the System".
Frame R (BNG1207) ...................................................................................................... 1
Frame L (BNG1208) ....................................................................................................... 1
Holder (R) (BNG1150) ................................................................................................... 1
Holder (L) (BNG1151) .................................................................................................... 1
Attachment (R) (BNG1173) ........................................................................................... 2
Attachment (L) (BNG1174) ........................................................................................... 2
Rear holder R (BNG1205) ............................................................................................. 1
Rear holder L (BNG1206) .............................................................................................. 1
Rear panel R (upper) (BMR1069) ................................................................................. 1
Rear panel L (upper) (BMR1070) .................................................................................. 1
Rear panel R (lower) (BMR1071) .................................................................................. 1
Rear panel L (lower) (BMR1072) .................................................................................. 1
Cushion A (BMR1106) ................................................................................................... 1
Cushion B (BMR1107) ................................................................................................... 2
Hinder panel (BMR1075) ............................................................................................... 2
Adjuster (BEF1011) ........................................................................................................ 2
Cover (BNE1012) ........................................................................................................... 1
Screw (M5x15) (PMB50P150FZB) .............................................................. 18 (Spare 2)
Screw (M5x50) (PMB50P500FZB) ................................................................................ 4
Screw (M6x20) (PMB60P200FZB) ................................................................................ 4
Screw (3x12) (ABA1167) ............................................................................................... 4
Screw (3x8) (BBZ30P080FZK) ..................................................................................... 10
Nut (M8) (NA80FZK) ...................................................................................................... 2
25
(1) Installing Ground
1 Ground
The ground must be flat and horizontal. It should be able to bear the weight of the system.
For wooden floors, if the part receiving the weight of the system lies at the center between the reinforcement beams below the
floor, the floor may become deformed or may curve inwards. In such cases, lay a more than 12 mm thick board below the
system to distribute the weight of the system on the floor.
For concrete floors, it may not be possible to install the system horizontally due to the roughness of the floor. In such cases, do
the same as above.
When installing the system on a installation table, always place the screen unit and cabinet on the same level of the installa-
tion table. The screen should also be more than 15 mm inside the edges of the installation table.
1. INSTALLATION CONDITIONS
The bottom of the screen is
not on the installation table.
More than 15 mm
(Fig.3-1)
2 How to culculate weight
Example : 40-inch Cube × 16screens
RM-V4000V (Multi-Projection Unit) 50kg × 16 = 800kg
RMS-V4011 (Projection Screen Kit) 11kg × 16 = 176kg
RMF-V4011 (Projection Frame) 27kg × 16 = 432kg
RMS-V112 (Projectin Install Table) 54kg × 4 = 216kg
Total : 1744 kg + α (screw, others)
Note) Other than the above weights, the weight of the person installing the system are also added.
For 16 screens, about 3 to 4 persons=240 kg (15% of total weight).
CHAPTER 3. INSTALLATION AND ASSEMBLY
Loading...
+ 106 hidden pages