Pioneer GEX-6100TV User Manual

Size:
1 Mb
Download

Hide-awayTV tuner

Syntoniseur de télévision déporté

Owner’s Manual

GEX-6100TV

Mode d’emploi

ESPAÑOL FRANÇAIS ENGLISH

Contents

Dear Customer ............................................

2

Connecting the Units ..............................

11

Before Using This Product

3

The Booster Switch ........................................

11

Installation

13

About This Product ..........................................

3

About This Manual ............................................

4

Installing the unit ............................................

13

Important ..........................................................

4

Setting the Antenna unit ..................................

14

Precaution ..........................................................

5

- Mounting Location

 

- After-sales Service for Pioneer Products

 

Installing the Antenna unit ..............................

16

Basic Operation ........................................

6

Specifications ..........................................

17

Basic Operation of TV Tuner ............................

6

 

 

Preset Tuning ....................................................

8

 

 

BSSM (Best Station Sequential Memory) ........

8

 

 

Confirming Current Channel and

 

 

 

Other Settings ............................................

9

 

 

Manual Preset Channel Setting ........................

9

 

 

1

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion—and,most importantly, without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

Start your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

Once you have established a comfortable sound level:

Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection.

Decibel

Level Example

30 Quiet library, soft whispers

40 Living room, refrigerator, bedroom away from traffic

50 Light traffic, normal conversation, quiet office

60 Air conditioner at 20 feet, sewing machine

70 Vacuum cleaner, hair dryer, noisy restaurant

80 Average city traffic, garbage disposals, alarm clock at two feet.

THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE

90 Subway, motorcycle, truck traffic, lawn mower

100 Garbage truck, chain saw, pneumatic drill

120 Rock band concert in front of speakers, thunderclap

140 Gunshot blast, jet plane

180 Rocket launching pad

Information courtesy of the Deafness Research Foundation.

NEDERLANDS ITALIANO FRANÇAIS DEUTSCH ESPAÑOL ENGLISH

2

Before Using This Product

Information to User

Alternation or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

[For Canadian model]

This Class B digital apparatus complies with Canadian ICES-003.

About This Product

This product is a TV tuner for reception of TV broadcasts. Combining it with a separately sold Over Head display AVR-W6100lets you enjoy TV entertainment. The tuner frequencies on this product are allocated for use in Western and Eastern Europe. Use in other areas may result in improper reception. (This product is not compatible with channels in France.)

WARNING

Do not place the display in a position where it will impede the driver’s visibility or affect the operation of your vehicle’s airbags.

The driver should not operate this product, which should be installed in a location where the driver cannot see it.

3

About This Manual

In this manual, the remote control is explained on the AVR-W6100’sOwner’s Manual. This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are notself-explanatory.This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment.

We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. It is especially important that you read and observe the “Precaution” on next page and in other sections.

When using with a Pioneer Over Head Display AVR-W6100,please read the Over Head display’s Owner’s Manual.

Important

The serial number of this device is located on the bottom of this product. For your own security and convenience, be sure to record this number on the enclosed warranty card.

NEDERLANDS ITALIANO FRANÇAIS DEUTSCH ESPAÑOL ENGLISH

4

Before Using This Product

Precaution

Keep this manual handy as a reference for operating procedures and precautions.

Always keep the volume low enough for outside sounds to be audible.

Protect this product from moisture.

If the battery is disconnected, the preset memory will be erased and must be reprogrammed.

After-salesService for Pioneer Products

Please contact the dealer or distributor from where you purchased the product for its aftersales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below:

Please do not ship your product to the companies at the addresses listed below for repair without advance contact.

7U.S.A.

7CANADA

Pioneer Electronics (U.S.A.), Inc.

Pioneer Electronics of Canada, Inc.

CUSTOMER SUPPORT

CUSTOMER SATISFACTION

DIVISION

DEPARTMENT

P.O. Box 1760

300 Allstate Parkway,

Long Beach, CA 90801-1760

Markham, Ontario L3R OP2

800-421-1404

(905) 479-4411

 

1-877-283-5901

For warranty information please see the Limited Warranty sheet included with your product.

5

Basic Operation

When using with a Pioneer Over Head Display AVR-W6100,please read the Over Head display’s Owner’s Manual.

Basic Operation of TV Tuner

1.Select the TV source on the Over Head Display.

For details, refer to the connected unit’s manual.

TV 4ch

Each press changes the Source ...

Source

Channel

2. Select the desired band.

 

 

 

 

 

4

 

 

 

 

 

TV1

2

3

4

5

8

12

21

30

38

45

56

69

 

 

 

 

 

 

TV1 = TV2

NEDERLANDS ITALIANO FRANÇAIS DEUTSCH ESPAÑOL ENGLISH

6

Basic Operation

3. Select the desired channel.

4

TV1

SEEK

This product’s lets you select the tuning by changing the length of the time you press the button.

Manual Tuning (step by step)

0.5 seconds or less

Seek Tuning

0.5 seconds or more

Note:

If you continue pressing the button for longer than 0.5 seconds, you can skip broadcasting stations. Seek Tuning starts as soon as you stop pressing the button.

To select channels with the AVR-W6100’smain unit, first switch the selection mode to MANUAL/SEEK. Each time you simultaneously press the2/3 CH button, the mode switches between MANUAL/SEEK and PRESET. Next, switch channels with a CH button.

4.Turn off the system.

7

Preset Tuning

Up to 12 stations can be memorized in 1 Band.

In regions where reception of no more than 12 station is possible, previously memorized stations may remain in memory.

• Select the desired preset channel.

4

TV1 P12

PRESET

Band Preset Number

Selection mode

Note:

To select channels with the AVR-W6100’smain unit, first switch the selection mode to MANUAL/SEEK. Each time you simultaneously press the2/3 CH button, the mode switches between MANUAL/SEEK and PRESET. Next, switch channels with a CH button.

BSSM (Best Station Sequential Memory)

The BSSM function automatically memorizes strongly transmitted broadcast stations in order from the lowest channel up.

• To switch the BSSM ON, press the CH CALL button for 2 seconds.

B S S M

JUST A MOMENT PLEASE.

Each press changes the Mode ...

To cancel the process, press the CH CALL button for 2 seconds again before memorization is complete.

NEDERLANDS ITALIANO FRANÇAIS DEUTSCH ESPAÑOL ENGLISH

8

Basic Operation

Confirming Current Channel and Other Settings

If the current audio source is TV, reception information such as the channel and band is displayed. You can also display to the preset channel list.

• Select the desired mode in the following order:

(CH CALL)

4

TV1

Each press changes the Mode ...

Channel Recall = Preset channel list= Indication OFF

(Preset channel list)

 

 

 

 

 

4

 

 

 

 

 

TV1

2

3

4

5

8

12

21

30

38

45

56

69

 

 

 

 

 

 

Channels memorized (preset) in that Band

Note:

• Recalled indications are displayed for 8 seconds.

Manual Preset Channel Setting

You can preset up to 12 channels per band manually.

1.Display a menu screen and select [PRESET CHANNEL SETTING] menu. (Refer to the connected unit’s manual.)

2.Choose [PRESET NO.].

C O U N T R Y S E T T I N G

PRESET NO .

1 [ 2ch]

9