GB
PHILIPS Institutional TV - Instructions for use
Installing the TV
•Place your TV on a stable and strong base.
•Leave at least a free pace of 5 cm on both sides and 10 cm from the top for good ventilation of the set.
•Do not cover the ventilation openings with items such as newspapers, cloths etc.
Connecting the mains
Insert the main plug into the wall socket and switch on. Please refer to the specification at the back of the TV for the correct operating voltage.
Installing the remote control
•Remove the cover at the back of the remote control.
•Insert the correct type and size batteries into the compartment making sure they are the right way around.
•You can secure your batteries by fastening an appropriate screw into the hole of the battery cover.
Tips and Alerts
•Never try repairing the set by yourself, always contact a qualified technician.
•Your TV contains material which can be recycled and reused by specialized companies. Please find out about local regulations on the disposal of your old TV set.
•TV consumes energy in the stand-by mode. Energy consumption contributes to air and water pollution. We advise you to switch off your TV overnight instead of leaving it in stand-by mode.
Accessing the Set-up Menu
Accessing the Set-up Menu, while the set is in the Security High state, can only be done by a T374AH Institutional Setup remote Menu command. While the set is in the Security Standard State the Setup Menu may be accessed with a normal guest cursor remote control by a sequence of numbers (319753MUTE).
•Language
The Language function is shown in the Menu as "LANGUAGE", and its valid states are "ENGLISH", "DEUTSCH", "FRANCAIS", "ITALIANO".
•No. of Programs
This item of the Setup Menu is activated by highlighting the item using the cursor up/down keys, then pressing the cursor right key. Number of TV, Pay TV, Radio and Info programs can be set and stored.
•TV Installation
When this menu is open, all the protections are inactive. To exit any menu press Menu button.
Input
The "Input" menu item selects the desired input source that will be assigned to the program. Possible values are Front End, AV1, and AV2YC (internal interface, for system TVs only).
System
Sets for East regions will have 2 states, WEST EU (PAL/SECAM-BG) and EAST EU (PAL/SECAM-DK).
Sets for West regions will have 3 states, WEST EU (PAL/SECAM-BG), UK (PAL-I), FRANCE (SECAM-L/L').
Manual Search
3 digits can be entered for a frequency in MHz or right cursor for auto search; during frequency entry the not yet entered digits are displayed as dashes "-".
Program no.
The programme type can be selected with the cursor left/right buttons. These buttons will toggle between all available types: "TV", "INFO", "PAY-TV"; if the radio is external (no radio tuner is present in the chassis), "RADIO" is displayed, if the radio is internal there will be a separate radio installation menu. If the program number of a certain type is 0, the corresponding type is not displayed.
1
Store
The present program information, is stored after pressing the cursor left/right button. Press Menu to exit without storing.
Fine Tune
Using the "control left/right" commands starts fine-tuning.
Protection
This bit indicates whether the selected program has a protection or not. With the cursor left/right keys the protection can toggle between "ON" and "OFF".
Label
This menu item will be used to add a label/name for each program. Pressing the left/right buttons you may enter or exit the label field; pressing the up/down cursor you may insert alphanumeric characters.
Teletext Language
This menu enables the user to select the teletext character set to be used for the selected channel. With cursor left/right you can select a letter corresponding to the different language clusters.
Video Blank
This item can change between "ON" and "OFF" to indicate if a picture mute is necessary.
Audio Mute
This item can change between "ON" and "OFF" to indicate if a sound mute is necessary.
Remarks
TV up/down, INFO up/down, PAY-TV up/down and RADIO up/down are active in menu mode and the TV reacts the same way as in TV mode.
•Radio Installation (if radio present)
This menu appears only if an internal radio is installed. The following subset of the TV installation menu items is displayed and has the same functionality: search, program, label, protection, store, exit. The frequency range for internal radio is 87.50 - 108.00 MHz FM. Beside program "RAD XX" appears, where XX is the selected program number; the type is RAD and is not selectable.
Search
The Search function is activated by pressing the "+" or Cursor Right button via the local keyboard or remote control.
Program
The user can cursor down to the "Program" menu item until it is highlighted and select a program number via the Digits, Cursor Right, or Cursor Left commands.
Protection
This menu item will be used to "Protect" or "Lock" each program individually.
Label
This menu item will be used to add a label/name for each program.
Store
This menu item is used to store the information displayed in the Radio installation sub menu.
•Clock Installation (if clock present)
The Clock Installation menu is displayed when the Clock Installation menu item is selected by highlighting the Clock Installation menu item with either Cursor Up or Cursor Down.
Display Standby
This menu item will be used to set the intensity of the display of the clock when the TV is in standby mode.
Display On
This menu item will be used to set the intensity of the display of the clock when the TV is in the On mode.
Time Setting
This menu item will be used to set the time for the clock.
Teletext Downloading
This menu item will be used to activate or deactivate the time downloading function.
Teletext Program
This menu item will be used to select the channel from which to retrieve the correct time from the teletext. When this item is selected the TV set tunes to the selected program.
2
Loading...