Pentax MZ-60 User Manual

0 (0)
Pentax MZ-60 User Manual

OPERATING MANUAL

 

 

 

 

 

 

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

16

22

 

 

 

 

 

 

 

 

 

 

1

1

 

3

 

A

 

 

 

 

 

 

 

 

 

 

 

N P

 

 

 

 

 

 

 

 

 

 

5

 

T

E

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

X

 

 

 

 

.

5

 

 

 

 

 

35

 

 

 

 

6

 

 

 

 

 

80

-

 

 

 

 

3

 

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

JIK LMNE FGH JIK

BASIC OPERATION

(PREPARATION)

ABCDE FGH JIKGH JIKGH

BASIC OPERATION

(SHOOTING)

JIKGH JIK LMNE FGH JIK

ADVANCED OPERATIONS

 

ABCDE FGH JIKGH

OTHERS

 

Congratulations on your purchase of this camera and welcome to the exciting world of Pentax autofocus photography! This compact and lightweight camera is an autofocus SLR camera that offers higher levels of sophistication and performance. Incorporating a broad range of advanced technologies and highly accurate automation, this camera will perform superbly for the most exacting photographer.

Read this instruction manual carefully to get a full explanation of operations before use.

Illustrations in this operating manual are the data function.

The camera does not operate when a lens with the following conditions attached.

1.When a lens that does not have the A position on the aperture ring is attached.

2.When an F, FA or A lens is attached with the aperture ring set other than the A position.

3.When any accessory mentioned on page 74 is used between the camera and an F, FA or A lens.

Lenses and accessories produced by other manufacturers are not made to our precise specifications and therefore may cause difficulties with, or actual damage to, your Pentax camera. We do not assume any responsibility or liability for difficulties resulting from the use of lenses and accessories made by other manufacturers.

1

FOR SAFE USE OF YOUR CAMERA

Although we have carefully designed this camera for safe operation, please be sure to follow precautions given on this page.

This mark indicates precautions that, if not WARNING:followed, could result in serious injury to the

person.

CAUTION: This mark indicates precautions that, if not followed, could result in minor or medium

injury to the person or damage to the equipment.

WARNING

The electronic circuits inside the camera contain high voltage working parts. Never attempt to disassemble the camera yourself.

Never touch internal parts of the camera if they become exposed from dropping the camera or for some other reason, as there is danger of an electric shock.

Wrapping the strap around your neck is dangerous. Make sure that small children do not get the strap caught around their neck.

Do not look directly at the sun through the camera, as viewing the sun may damage your eyes, and/or parts of the camera (e.g.: shutter curtains, etc.)

Be sure to store batteries out of the reach of children. Seek medical assistance immediately if accidentally swallowed.

CAUTION

Do not use the flash near anyone's eyes, as it may hurt them. Be particularly careful with the flash around infants.

Never try to disassemble, short or recharge the battery. Also, do not dispose of the battery in fire, as it may explode.

Remove the batteries from the camera immediately if they become hot or begin to smoke. Be careful not to burn yourself during removal.

2

PRECAUTIONS FOR YOUR CAMERA

Your Pentax camera is a high-precision mechanism. Handle it with great care.

Precautions when taking pictures

Do not use the camera where it may come in contact with rain, water, or any other liquid, because the camera is not weather, water, or liquid resistant. Should the camera get wet from rain, splashing water, or any other liquid wipe it off immediately with a dry soft cloth.

Do not drop the camera or allow it to hit solid objects. If the camera suffers a shock or impact, take it to a Pentax service center for inspection.

Be careful not to subject the camera to strong vibrations, shock or pressure. Use a cushion to protect the camera when carrying it in a motorcycle, car, boat, etc.

Condensation on the interior or exterior of the camera may be extremely harmful to the camera mechanism as it may cause rust. Furthermore, if the camera is taken from warm temperature to a subfreezing one or vice versa, the formation of icelets may cause damage. In such a case, put the camera into a case or plastic bag so that any changes in temperature difference is minimized. Do not remove it from the bag until temperature has stabilized.

Regular size color prints may cut off what appears on the extreme edges of the film frame. Compose your picture with a margin of safety at the edges.

Precautions for storage

Avoid leaving the camera for extended periods in places where the humidity and temperature are very high, such as in a car.

Do not store the camera in a closet with moth balls or in an area where chemicals are handled. Store it in a place with good dry air circulation to prevent the growth of fungus.

Precautions for proper care

Never touch the shutter curtain or mirror with your finger or any other object.

Use a blower and lens brush to remove dust accumulated on the lens or viewfinder.

Never use solvents such as paint thinner, alcohol or benzene to clean the camera.

Electrical problems may often be caused by water, dirt or dust at points of electrical contact. Also check for battery leakage, traces of dirt or grease, or corrosion due to salinity or gas. If you cannot correct the problems, have your camera inspected at a Pentax service center. Repairs of this nature are not

3

Other precautions

The temperature range at which this camera functions properly is 50°C to -10°C (122F˚ to 14F˚).

A camera which has been submerged in water usually cannot be repaired. If such an accident should occur, it is advisable to contact a Pentax Service Center immediately.

To maintain optimum performance, it is recommended that the camera be inspected every one or two years. If the camera has not been used for an extended period, or is being prepared for an important photographic session, it is recommended that you have the camera inspected or test shoot with it.

Repairs deemed necessary due to usage of this product in an industrial or commercial application may not be covered under the terms of the Pentax warranty.

The PENTAX warranty provides only for the repair of defects in materials or workmanship. Damage of any kind cannot be repaired at any charge under the terms of the warranty. If the difficulty is caused as a direct result of the product being used in conditions as outlined in the "Precautions for Your Camera" section or any other operation contrary to the instructions outlined in this manual, charges will be assessed and a repair quotation will be provided.

PRECAUTIONS FOR BATTERY USAGE

Use two 3V lithium batteries (CR2 type).

Misuse of the battery can cause hazards such as leakage, overheating, explosion, etc. The battery should be inserted correctly with regard to polarity (+ and -) marked on the battery and the camera.

Battery performance may be temporarily hindered in low temperatures, but will recover in normal temperatures.

Keep a spare battery on hand for replacement convenience when shooting outdoors or while traveling.

If the built-in flash is used continuously, the battery may become warm, but it does not mean that the battery is faulty; it is one of the battery's characteristics.

Replace the batteries at the same time. Do not mix battery brands, type or an old battery with a new one. It may cause explosion or overheating.

4

TABLE OF CONTENTS

FOR SAFE USE OF YOUR CAMERA . . . . . . . . . . . . . .1 PRECAUTIONS FOR YOUR CAMERA . . . . . . . . . . . . .2 PRECAUTIONS FOR BATTERY USAGE . . . . . . . . . . .3 TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . .4 NAMES OF WORKING PARTS . . . . . . . . . . . . . . . . . . .6 LCD PANEL INDICATIONS . . . . . . . . . . . . . . . . . . . . . .8 VIEWFINDER INDICATIONS . . . . . . . . . . . . . . . . . . .10 QUICK AND EASY SHOOTING . . . . . . . . . . . . . . . . .11 CAMERA FUNCTIONS AVAILABLE WITH VARIOUS LENSES . .12 HOW TO USE THIS OPERATION MANUAL . . . . . . . .14

BASIC OPERATION (PREPARATION)

17

STEP1. ATTACHING THE CAMERA STRAP . . . . . . . .18 STEP2. LOADING THE BATTERIES . . . . . . . . . . . . . .19

• BATTERY LIFE . . . . . . . . . . . . . . . . . . . . . . . . . .21

• IF THE BATTERY IS EXHAUSTED . . . . . . . . . . .22 STEP3. TURNING ON THE POWER . . . . . . . . . . . . . .23 STEP4. SETTING THE DATA . . . . . . . . . . . . . . . . . . .24 STEP5. ADJUSTING DATE AND TIME . . . . . . . . . . . .26 STEP6. ATTACHING THE LENS . . . . . . . . . . . . . . . . .28 STEP7. FILM LOADING . . . . . . . . . . . . . . . . . . . . . . .30 STEP8. OPERATING THE SHUTTER RELEASE BUTTON .32

5

BASIC OPERATION (SHOOTING)

33

Step 1. SET THE STANDARD PROGRAM MODE . . . .34 Step 2. SET THE AUTO POP-UP FLASH . . . . . . . . . .35 Step 3. SET THE SINGLE FRAME DRIVE MODE . . . .36 Step 4. SET THE AUTO FOCUS MODE TO AF . . . . . .37 Step 5. USING THE ZOOM LENS . . . . . . . . . . . . . . . .38 Step 6. HOLDING THE CAMERA . . . . . . . . . . . . . . . .39 Step 7. TAKING A PICTURE . . . . . . . . . . . . . . . . . . . .40 Step 8. UNLODING A FILM . . . . . . . . . . . . . . . . . . . . .42 Step 9. REWINDING A FILM IN MID-ROLL . . . . . . . . .43

ADVANCED OPERATIONS

XX

SELECTING A DRIVE MODE . . . . . . . . . . . . . . . .

45-50

CONSECUTIVE-FRAME DRIVE MODE . . . . .

. . .46

SELF-TIMER MODE . . . . . . . . . . . . . . . . . . . .

. . .47

AUTO BRACKET EXPOSURE MODE . . . . . . .

. . .49

SELECTING 6 PICTURE MODES . . . . . . . . . . . . .

51-58

STANDARD PROGRAM MODE . . . . . . . .

. . .53

PORTRAIT PROGRAM MODE . . . . . . . .

. . .54

LANDSCAPE PROGRAM MODE . . . . . . .

. . .55

ACTION PROGRAM MODE . . . . . . . . . . .

. . .56

CLOSE-UP PROGRAM MODE . . . . . . . .

. . .57

NIGHT-SCENE PROGRAM MODE . . . . .

.5859

EFFECT OF APERTURE AND SHUTTER SPEED .

. . 61

6

TABLE OF CONTENTS

SELECTING ANOTHER EXPOSURE MODES . . . .61-69 APERTUREPRIORITY AE MODE . . . . . . . . . . . .61 SHUTTERPRIORITY AE MODE . . . . . . . . . . . . .63 METERED MANUAL MODE . . . . . . . . . . . . . . . . .65 AE LOCK FNCTION . . . . . . . . . . . . . . . . . . . . . . . . . .70 MANUAL FOCUSING . . . . . . . . . . . . . . . . . . . . . . . . .71 HARD-TO-AUTOFOFUS SUBJECTS . . . . . . . . . . . . .73 SETTING THE FILM SPEED (ISO) MANUALLY . . . . .87 USING BUILT-IN FLASH . . . . . . . . . . . . . . . . . . . . . . .74

SELECTING THE VARIOUS BUILT-IN FLASH MODES RED-EYE REDUCTION FLASH FUNCTION . . . . .76 ABOUT RED-EYE PHENOMENON . . . . . . . . . . . .76 FLASH EFFECTIVE RANGE FOR THE PICTURE MODE WITH ISO 100 (400) FILM USED . . . . . . . .77

MANUAL POP UP THE BUILT-IN FLASH . . . . . . . . . .78 FLASH OFF MODE . . . . . . . . . . . . . . . . . . . . . . . . . .80 DAYLIGHT-SYNC SHOOTING . . . . . . . . . . . . . . . . . . .81 ADVANCED OPERATION FOR BUILT-IN FLASH . . . .82 COMPATIBILITY OF F AND FA LENSES WITH

THE BUILT-IN FLASH . . . . . . . . . . . . . . . . . . . . . . . . .85 OVERVIEW OF FLASH FUNCTION . . . . . . . . . . . . . .88 USING PENTAX DEDICATED AUTO FLASH . . . . . . . .90 SLOW-SPED=SYNC SHOOTING . . . . . . . . . . . . . . . .94

7

OTHERS

XX

ACCESSORIES (OPTIONAL) . . . . . . . . . . . . . . . . . . .XX TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . .XX PROGRAM LINES . . . . . . . . . . . . . . . . . . . . . . . . . . .XX STANDARD PROGRAM MODE

NIGHT-SCENE PROGRAM MODE WITHOUT FLASH PORTRAIT ROGRAM MODE

LANDSCAPE PROGRAM MODE

CLOSE-UP PROGRAM MODE ACTION PROGRAM MODE

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .XX WARRANTY POLICY . . . . . . . . . . . . . . . . . . . . . . . . .XX

8

NAMES OF WORKING PARTS

Main switch (p.16)

Built-in flash

Select dial

AV button

Focus mode

switch (p.27,58)

Shutter release button

Lens mount

Lens unlock

Mirror

Lens information

AF coupler

index

 

button (p.14)

 

contacts

 

 

 

 

Strap lug (p.11)

Back cover

Film information window

Battery chamber cover (p.12)

Battery cover

screw (p.12)

Back cover release lever (p.18)

Tripod socket

9

Hot shoe

LCD panel

Drive mode button

AE lock

(p.38,40)

 

button

 

(p.57)

Flash mode

button (p.25) Flash pop up button

Exposure mode button

Date mode button

?????????????????????????????

 

?????

?????

 

?????

 

 

 

?????

?????

?????

• ?????

 

 

• ?????

10

LCD PANEL INDICATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

: Flash status information

 

 

 

 

 

: Date mode

 

(p. 25, 36)

 

 

 

 

 

: Exposure mode/

 

: Flash off information

 

 

 

 

 

 

AV,TV select pointer

 

(p. 26)

 

 

 

 

 

: Self-timer

 

: Red-eye reduction flash

 

 

 

 

 

 

(p.38)

 

indication (p. 32)

 

 

 

 

 

: 2 seconds self-timer

 

: Automatic flash

 

 

 

 

 

: Aperture value

 

information (p. 25)

 

 

 

 

 

: Auto bracket exposure

 

: Manual-set film speed

 

 

 

 

 

 

(p.55)

 

 

(p. 64)

 

 

 

 

 

: Film status information

 

: Shutter speed

 

 

 

 

 

 

(p.20,21)

 

: Battery exhaustion

 

 

 

 

 

: Exposure counter

 

warning (p.13)

 

 

 

 

 

: Day/time

 

: Consecutive shooting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(p.38)

 

 

 

 

 

 

 

 

 

 

 

 

 

All indications will not actually appear simultaneously as shown.

LCD (Liquid-Crystal Display)

When the LCD is exposed to high temperatures over approximately 60!, it may blacken, but when the temperature normalizes, it should return to normal.

11

VIEWFINDER INDICATION

: AF frame (p. 30)

: Flash status information (p. 32, 36)

: AE lock (p. 57)

: Focus indicator (p. 59)

: Over exposure

: Correct exposure : Under exposure

12

QUICK AND EASY SHOOTING

1

2

Loading the

Open the two CR2

See page xx

Set the date and time

You can skip this step if you do not imprint the data at this time. The date and time should be adjusted after loading the batteries. See page xx

3

4

Attaching the lens

Align the red dots on the camera and lens mounts. Turn the lens to clockwise until it clicks in place.

See page xx

Set the lens aperture ring to

position

This camera does not work other

than

position. See page xx

5 Turn the power switch ON.

Depress the main switch button.

See page xx

13

6

7

8

9

10

Set the exposure Standard program

Move the select lever to pointer to while depressing the exposure button. See page xx

Loading the film.

See page xx

Set to the Autofocus

Set the focus mode switch to in down position.

See page xx

Compose the subject by turning the zoom ring.

See page xx

Adjust the focus and take a picture.

Frame the subject in the focus frame and depress the shutter release button. Auto flash pops up automatically if it necessary. See page xx

14

CAMERA FUNCTIONS AVAILABLE WITH VARIOUS LENSES

Function

Lens

FA lens

F lens

 

[Mount type]

[KAF2] *1

[KAF] *1

Autofocus (Lens only)

 

 

 

Manual focus (with FI) *2

 

*3

*3

 

(with Matte field)

 

 

Power zoom

 

 

 

Image size tracking

 

 

 

Zoom clip

 

 

 

Auto zoom effect

 

 

 

Picture Mode

 

 

 

Aperture-Priority AE

 

 

 

Shutter-Priority AE

 

 

 

Metered Manual

 

 

 

Auto-popup built-in flash mode *4

 

 

 

Programmed TTL Auto Flash

 

 

 

TTL Auto Flash

 

 

 

???????????????

 

 

 

Notes:

*1. As an F/FA 85mm f/2.8 Soft lenses and FA 28mm f/2.8 soft lens do not have the

position on the aperture ring, the shutter cannot be released. *2. Manual focusing using the focus indicator (FI) in the viewfinder. *3. Lenses with a maximum aperture of f/5.6 or larger.

*4. Only works when the picture mode is selected.

15

MEMO

KAF2 and KAF mount lenses are designed to work with the Autofocus SLR camera.

The A, F, and FA lenses have the (auto) position on the lens aperture ring.

The camera will not operate when a lens with following condition.

1.When a lens, which does not have the position on the aperture ring is attached.

2.When an F, FA or A lens is attached with aperture ring set other than the position.

3.The accessories for close-up photography are attached.

16

HOW TO USE THIS

MANUAL

This manual is organized into the

 

 

 

 

 

 

 

 

If you like to begin taking

 

 

 

 

 

pictures with this new camera as

 

 

soon as possible, read section

 

 

1and 2, "BASIC

 

 

OPERATION(PREPARATION)"

 

 

and " BASIC OPERATION

 

 

(SHOOTING)".

 

 

These sections introduce only

 

 

the basic functions of this

 

 

camera.

 

 

 

 

Advanced Operations

More detailed information can

 

—>Page xx

be found in the section 3 and

 

the section 4.

 

 

 

 

 

 

Other information

 

 

—>Page xx

 

BASIC OPERATION (PREPARATION)

Step 1 PATTACHING THE CAMERA STRAP . . . . . .18 Step 2 LOADING THE BATTERIES . . . . . . . . . . . . .19 Step 3 TURNING ON THE POWER . . . . . . . . . . . . .18 Step 4 SETTING THE DATA BACK . . . . . . . . . . . . .18 Step 5 IMPRINTING THE DATA . . . . . . . . . . . . . . . .18 Step 6 ATTACHING THE LENS . . . . . . . . . . . . . . . .18 Step 7 FILM LOADING . . . . . . . . . . . . . . . . . . . . . .18 Step 8 OPRATING THE SHUTTER RELEASE

BUTTON . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

BASIC OPERATION

(PREPARATION)

BASIC OPERATION

(SHOOTING)

ADVANCED OPERATIONS

 

OTHERS

 

18 Step 1

ATTACHING THE CAMERA STRAP

1

2

Pass

the from

Follow the same procedure to attach the other end of the strap to the other strap lug.

MEMO

The strap has pockets that can store the viewfinder cap, hot shoe cover or any other small accessory as illustrated.

Step 2

LOADING THE BATTERIES

1 Open the battery cover by turning counterclockwise coin, etc. as illustration.

2 Load two 3V lithium batteries (CR2) or equivalent into the battery chamber with positive (+) contacts of the batteries pointing up as shown in the illustration.

3 Push in the battery chamber cover firmly and use a coin to turn the cover clockwise to lock securely.

4 If the batteries are removed, date indicates [-----] that no data will be imprinted.

See page xx for setting the date and time.

MEMO

The camera memorizes only the exposure number and date when the batteries were removed.

19

BASIC OPERATION

(PREPARATION)

BASIC OPERATION

(SHOOTING)

ADVANCED OPERATIONS

 

OTHERS

 

20

LOADING THE BATTERIES

MEMO

Be sure to use two Lithium batteries CR2 or equivalents.

Both the camera function and the data imprinting function to keep constant track of time use the batteries.

The optional "AA-Battery Pack FG" is also available for this camera instead of using the lithium batteries.

Replace the batteries at the same time. Do not mix battery brands, type or an old battery with a new one.

When the batteries were replaced, date mode will be re-set and the following camera settings will take effect.

All other settings will remain unchanged

Red-Eye-Reduction

Auto pop up flash

Self-timer Drive mode

flash

 

 

 

 

 

Off

On

Single frame

 

 

 

Keep a spare battery on hand for replacement convenience when shooting outdoors or while traveling.

Battery Life

using 24-exposure film rolls

???????????

20ºC

–10ºC

General existing light photography

Approx. 120 rolls

Approx. 30 rolls

 

 

 

Flash photography (using flash 50% of the times)

Approx. 20 rolls

Approx. 15 rolls

 

 

 

Flash photography (using flash 100% of the times)

Approx. 12 rolls

Approx. 5 rolls

 

 

 

MEMO

CR2 batteries were used under Pentax testing conditions.

Actual battery life and performance may vary drastically depending on usage of autofocus, built-in flash and external conditions such as temperature and freshness of the battery.

Battery performance may be temporarily hindered in low temperatures, but it will recover in normal temperature.

21

BASIC OPERATION

(PREPARATION)

BASIC OPERATION

(SHOOTING)

ADVANCED OPERATIONS

 

OTHERS

 

22

LOADING THE BATTERIES

Low Battery Warning

When the batteries are exhausted, the battery appears on the LCD to warn you. Replace the batteries as soon as

MEMO

See page 19 for loading the batteries

Even if the low-battery symbol appears, exposure shutter can be released. It is recommended to possible.

When the low battery warning starts blinking, and no indication in the viewfinder.

Step 3

TURNING ON THE POWER

1 Turn the Push the to turn ON

2 Turn the power OFF

Push the main switch button again to turn OFF.

MEMO

Be sure to turn the main switch OFF to prevent accidental battery drain when not in used.

If the camera is ON and left unused for over 3 minutes, the power is tuned OFF automatically.

23

BASIC OPERATION

(PREPARATION)

BASIC OPERATION

(SHOOTING)

ADVANCED OPERATIONS

 

OTHERS

 

24 Step 4

ADJUSTING THE DATE AND TIME

1 Turn the power ON and the [DATE] button to date mode on the LCD

2

3

Keep depressing the [DATE] button for 3 seconds on the date mode display, the "year" digits will start to blink.

Each time the [DATE] button is depressed, the blinking digits change in the following order: Year-Month-Day-Hour-Minute-: . Select the desired digits.

4 Move the Select dial to right or left to change the digits that

you wish to change the blinking digits.

The digits increase by one each time the select dial is moved to

right and the digits decreased by it’s moved to left.

Holding the select dial for about one second will change the digits rapidly.

5 After the data has been changed, depress the [DATE] button each time until blinking stops.

6 Depress the [DATE] button to select your date mode that you wish to imprint on your pictures.

MEMO

Depress the [DATE] button in synchronize with a time signal to set the second to zero while ( : ) is blinking.

Operational precautions

The working temperature for data printing is 0°C – 50°C (32F – 122F).

Use DX-coded films with ISO rating from 25 – 5000.

If high-speed film with an ISO rating of1000 or faster is used, the imprinted characters may blur.

If film with ISO rating of 50 or slower is used, the printed characters may be dark or dim.

If you release the shutter while the blinking data is being corrected, the data cannot be imprinted.

25

OTHERS ADVANCED OPERATIONS BASIC OPERATION (SHOOTING) (PREPARATION)

26 Step 5

SETTING THE DATA BACK

The DATE model records date information on your pictures clearly on each frame that you expose.

Selecting the date mode

1

2

At each depress of the [DATE] button, the

on the LCD panel as follows. (Av/Tv)mode)(Av/Tv)

While the date mode is displayed, at each depress of the [DATE] button as shown in the illustration, the date mode on the LCD panel of the data changes as indicated in the chart.

27

(Year Month Day)

(Day Hour Minute)

(No data imprinted)

(Month Day Year)

(Day Month Year)

MEMO

[ M ] on the LCD indicates "Month".

Year 2000 will imprint " 00 " on pictures.

[ -- -- -- ] indicates that no data will be imprinted.

If there is a white or yellow object in the left bottom corner of the picture where the data is imprinting, the data may be difficult to read. When composing your picture, try to avoid brightly colored subject in that corner.

The data operates on power for the 6V lithium battery camera. If the camera batteries were removed or replaced, data setting will be initialized to "[ -- -- -- ] no data imprinted ", need to adjust the date and time.

BASIC OPERATION

(PREPARATION)

BASIC OPERATION

(SHOOTING)

ADVANCED OPERATIONS

 

OTHERS

 

28 Step 6

ATTACHING THE LENS

1

2

Remove the body 1 and rear lens cap

Align the red dots on the lens and camera while mounting the lens to the camera body, then turn the lens clockwise until it clicks in place.

3

4

To remove the front lens cap, squeeze the tabs on both sides in the direction of the arrow.

To remove the lens, hold down the lens unlock button and turn the lens counterclockwise.

Loading...
+ 88 hidden pages