Pentax KM Camera User Manual

0 (0)

Pentax KM

Camera Manual

Posted 12-10-'02

For reference use on many Chinon manual focus and metering cameras

This is the full text and images from the manual. This may take 3 full minutes for all images to appear. If they do not all appear. Try clicking the browser "refresh" or "reload button".

This camera manual library is for reference and historical purposes, all rights reserved.

This page is copyright by , M. Butkus, N.J.

This page may not be sold or distributed without the expressed permission of the producer

I have no connection with Chinon Co., Japan

If you find this manual useful, how about a donation of $3 to: M. Butkus, 29 Lake Ave., High Bridge, NJ 08829-1701 and send your E-mail address too so I can thank you.

Most other places would charge you $7.50 for a electronic copy or $18.00 for a hard to read Xerox copy.

This will allow me to continue to buy new manuals and maintain these pages. It'll make you feel better, won't it?

If you use Pay Pal, use the link below. Use the above address for a check, M.O. or cash.

To main Chinon/Ricoh manual site

 

 

 

 

 

 

 

 

 

 

INDEX

 

 

 

 

 

 

 

 

 

Nomenclature ....

1

 

 

 

Flash Synchronization

18

 

 

Specifications

4

 

 

 

 

 

 

 

 

Depth-of-field Preview Button and Guide 20

 

Lens Mounting

6

 

 

 

 

 

 

 

Helpful Hints on Exposure Problems

22

 

Battery

7

 

 

 

 

 

 

 

 

 

Manual Shutter Operation 23 Infra-red Photography

24

Basic Operating Instructions

8

 

 

Multiple Exposure 25

 

 

 

Film Loading and Winding

10

 

 

 

 

 

Range of Light Measurement 26

 

 

Film Reminder Dial

11

 

 

 

 

 

 

Open-aperture or Stop-down Metering

27

 

Setting ASA Film Speed 12

 

 

 

 

 

Using Conventional Screw-mount Takumar Lenses

28

Compose and Focus

13

 

 

 

 

Resistance to Temperature Extremes and Changes ....31

Shutter 14

 

 

 

 

 

 

 

 

 

 

Camera Maintenance

32

 

 

Camera Holding

15

 

 

 

 

 

 

 

 

Warranty Policy ....34

 

 

 

Film Unloading

16

 

 

 

 

 

 

 

 

 

 

 

 

 

Self-timer

....17

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SMC Pentax lenses and Pentax accessories are engineered and produced meticulously to precise Asahi Pentax specifications. Lenses and accessories from other manufacturers are not produced to these precise specifications and, therefore, may cause difficulties with -- or actual damage to -- a Pentax camera. Asahi Pentax cannot assume any responsibility or liability for difficulties resulting from the use of any other brand of lenses or accessories with an Asahi Pentax camera.4www.butkus.org

Pentax KM Camera User Manual

20.Self-timer (Start lever underneath)

21.Focusing ring

22.Strap ring lug

23.X flash terminal

24.FP flash terminal

25.Accessory fitting groove

26.Film guide rail

27.Film rail

28.Viewfinder eyepiece

29.Film chamber

30.Battery chamber4www.butkus.org

31.Tripod receptacle

32.Shutter curtains

33. Film rewind button

34. Sprocket

35. Film take-up spool

36. Film roller

37. Back cover

38. Film pressure plate

SPECIFICATIONS

 

 

Type

35mm SLR with built-in through-the-lens light meter.

Film and Picture Size

35mm film. 24mm x 36mm.

 

Standard Lenses

SMC Pentax 50mm f/i .2, 50mm f/i .4 and 55mm f/i .8 with fully-automatic diaphragm.

 

Filter size: 52mm. Focusing: 0.45m (1.5 ft.) to infinity.

Shutter

Horizontal run, focal-plane shutter of rubberized silk curtains. Speeds: B, 1 to i/l000sec.

Self-timer

Built-in self timer with interrupt function. Releases shutter in 5 -- 13 sec.

Viewfinder

Pentaprism finder with cross-micro prism or split-image focusing screen. 0.87x

 

magnification with 50mm lenses (life-size with 55mm lens). Dioptry --1.0.

Focusing

Turn focusing ring until viewfinder image comes into focus.

Reflex Mirror

Instant-return type with special shock absorbers for minimum vibration.

Lens Mount

Pentax bayonet mount.

 

Film Advance

Ratchet-type rapid-wind lever. 100 pre advance angle and 160° advance angle "Cocked"

 

indicator alongside shutter release button.

Exposure Counter

Automatic re-set.

 

Film Rewind

Rapid-rewind crank for speedy film take-up

Flash

X contact hot shoe for cordless flash connection. FP + X contacts for conventional flash cord

Synchronization

connection. X synchronization at 1/60 sec

 

S meter measures the average brightness of the ground glass at full aperture, and couples

Exposure Meter

directly to aperture, shutter and film speed settings. Center needle for correct exposures. Film

speed from 20 to 3200 ASA. EV3-- 18 for ASA 100 film with 50mm lens. Powered with one

 

 

1 .5V silver oxide battery. Meter on-off by extra CdS cell in body.

Loaded Film Indicator

Reminder dial below film rewind knob, with settings for 20 or 36 (exposures), for daylight

or tungsten color , or

black and white film.4www.butkus.org

 

Dimensions

With50mm f/1.4 lens: width 143mm (5.6") x height 91 .4mm (3.6") x depth 94mm (3.7").

Weight

887g(31 ozs.) with 50mm f/1 .4 lens. 622g(21.8 ozs.) with no lens.

LENS MOUNTING

1.Remove the rear lens and body caps.

2.Match the red dot (A) on the camera body with the red dot (B) on the lens. Insert the lens into the body and turn it clockwise until the lens locks with a click.

3.In the dark, when the red dots are difficult to see, align the white plastic bump (C) on the lens barrel with the lens release lever (D) by touch. Then turn and lock as above.

4.To detach, hold the camera with your left hand. Depress the lens release lever (D) while turning the lens counterclockwise with your right hand.

CAUTION

If you have to put the lens down without the rear lens cap, place it only on its front end, never on the rear. When changing lenses outdoors with film in the camera, avoid direct sunlight.4www.butkus.org

A sliver oxide battery is packed separately. Be sure to insert it into the battery chamber before operating the camera.

BATTERY INSERTION

Open the battery chamber cover with a coin. Insert the battery with (+) side facing out. For replacement, use Eveready S76E or Mallory MS76H or equivalent.

CAUTION

The battery is like a phonograph record. It can be damaged by skin acids. Handle by the edges with a dry cloth only. Be sure the battery is cleaned with the cloth before insertion into the camera. The battery is not rechargeable. Do not throw dead battery into a fire, as it may explode. Also, keep it beyond the reach of small children. When not actually measuring the light, be sure that the lens is covered at all times. Leaving the lens cap off for an extended period will exhaust the battery.

Set the shutter speed dial to B (bulb) position. Turn the ASA dial to ASA 100. Look at the meter needle through the viewfinder. If the needle is in "up" position and remains steady, the battery is good: if it does not, replace the battery. Check the battery frequently. And take spares with you when traveling.4www.butkus.org

BASIC OPERATING INSTRUCTIONS

1.TURN ON LIGHT METER

Remove the lens cap and the meter circuit is on. The CdS cells measure the light coming through the lens for correct exposure.

2.SET FILM SPEED

Lift the outer ring of the shutter speed dial and turn it until the same number as the ASA number of the film you're using appears next to the small oragne index alongside the figure 1.

3.SET SHUTTER SPEED

Turn the shutter speed dial and set the speed you wish to use to the index. Generally, you should use the fastest possible shutter speed to avoid blurred pictures caused by camera movement. Try starting with 1/125 sec. outdoors in daylight and 1/60 sec. indoors.

4.COMPOSE AND FOCUS

While viewing through the viewfinder, turn the focusing ring until your subject comes into sharp focus.

5.ROTATE DIAPHRAGM RING

The needle moves as you turn the diaphragm ring. When the needle on the right side of the viewfinder image is at the center, you will get correct exposure. If the needle does not come to the center no matter how far you turn the diaphragm ring, change the shutter speed. When the needle is close to the

(+) mark, you will get an over-exposure; change the shutter speed to a faster setting. If the needle is closer to the (-) mark, you will get an under-exposure; change the shutter speed to a slower setting.

6.RELEASE SHUTTER

Cock the rapid-wind lever. Hold your camera firmly and trip the shutter. Then cock the rapid-wind lever for the next picture. (When taking a series of pictures under the same lighting conditions, it is not necessary to repeat instruction 5.

Loading...
+ 12 hidden pages