Pelco DX7008-240, DX7016-180, DX7016-060, DX7016-360, DX7016-240 User Manual

...
0 (0)

®

00961

DX7000 Series

Digital Video Recorder

Installation/

Operation Manual

C682M-E (11/01)

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com

In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150

International Customers: Tel +1(559) 292-1981 • FAX +1(559) 348-1120

CONTENTS

 

IMPORTANT SAFEGUARDS AND WARNINGS ......................................................

5

DESCRIPTION ................................................................................................................

6

MODELS ....................................................................................................................

6

INSTALLATION ..............................................................................................................

7

TWO-WIRE CONTROL SYSTEM INSTALLATION ....................................................

8

PROGRAMMING ............................................................................................................

9

DISPLAY MODE ........................................................................................................

9

DX7000 SYSTEM SETUP ........................................................................................

10

CAMERA SETUP ..............................................................................................

10

COLOR SETUP ................................................................................................

11

SCHEDULE SETUP .........................................................................................

12

SPEED SETUP .................................................................................................

14

MOTION DETECTION SETUP .........................................................................

15

PASSWORD SETUP ........................................................................................

16

PAN & TILT SETUP ...........................................................................................

17

QUIT TO EXPLORER .......................................................................................

17

UPDATE PROGRAM ........................................................................................

17

OPERATION ...................................................................................................................

18

RECORDING STATUS .............................................................................................

18

HDD STORAGE INDICATOR ...................................................................................

18

VIEW .........................................................................................................................

18

PTZ CONTROL MODE .............................................................................................

18

PATTERN ..........................................................................................................

19

PRESETS .........................................................................................................

19

PRESET TOURS ..............................................................................................

20

SEARCH CONTROL MODE .....................................................................................

21

SELECT DATE AND TIME ................................................................................

22

INDEX SEARCH ...............................................................................................

22

BACKUP TO 3.5-INCH DISKETTE ...................................................................

23

PRINT IMAGE ...................................................................................................

23

CD-RW SEARCH ......................................................................................................

23

REMOTE VIEWING ..................................................................................................

23

REMOTE SITE SOFTWARE .......................................................................................

24

DESCRIPTION ...............................................................................................................

24

INSTALLATION .............................................................................................................

24

REGISTERED SITE SETUP .....................................................................................

25

OPERATION ...................................................................................................................

26

VIEW .........................................................................................................................

28

PTZ CONTROL MODE .............................................................................................

28

PATTERN ..........................................................................................................

29

PRESETS .........................................................................................................

29

PRESET TOURS ..............................................................................................

30

SEARCH MODE .......................................................................................................

31

SELECT DATE AND TIME ................................................................................

32

EMERGENCY AGENT SOFTWARE .........................................................................

33

BACKUP VIEWER SOFTWARE .................................................................................

34

BACKUP VIEWER OPERATION ................................................................................

35

WATERMARKING TOOL .............................................................................................

36

WATERMARKING TOOL OPERATION ....................................................................

36

2

Pelco Manual C682M-E (11/01)

INSTALLING THE DX7000CD (CD-RW Drive) ......................................................

38

 

LOADING THE DIRECTCD SOFTWARE .................................................................

41

 

HOW TO OPERATE THE CD-RW ............................................................................

41

 

INITIATE DX7000 COPY BUTTON ...................................................................

41

 

PREPARING CD-RW MEDIA FOR BACKUP ...........................................................

42

 

INITIAL FORMATTING OF CD-RW MEDIA USING THE DX7000 DVR ...........

42

 

BACKUP WINDOW ...................................................................................................

44

 

HOW TO BACKUP (Copy) TO THE CD-RW DRIVE .........................................

45

DX7000EM (External Modem) .................................................................................

46

 

CONNECT THE EXTERNAL MODEM TO THE DX7000 ..........................................

46

 

LOAD THE DRIVER FOR THE MODEM ..................................................................

47

SPECIFICATIONS .........................................................................................................

50

WARRANTY AND RETURN INFORMATION ..........................................................

52

LIST OF ILLUSTRATIONS

 

1

Rear View of Back Panel ...................................................................................

7

2

Two-Wire Control System Installation ................................................................

8

3

PTZ Installation ..................................................................................................

8

4

Power Adapter Plug for the RS-422 Converter Multiple .....................................

8

5

Display Mode .....................................................................................................

9

6

Channel Setup Menu ........................................................................................

10

7

Color Setup Menu .............................................................................................

11

8

Schedule Setup Menu .......................................................................................

12

9

Speed Setup Menu ...........................................................................................

14

10

Motion Detection Setup Menu ...........................................................................

15

11

Password Setup Menu ......................................................................................

16

12

Pan and Tilt Protocol Menu ...............................................................................

17

13

PTZ Controls .....................................................................................................

18

14

PTZ Menus .......................................................................................................

20

15

Search Control Menu ........................................................................................

21

16

Playback Control Buttons ..................................................................................

22

17

DX7000 Series Remote User Software Installation Menu ................................

24

18

Setup Screen ....................................................................................................

25

19

Online Mode ......................................................................................................

26

20

PTZ Controls .....................................................................................................

28

21

Pattern and Preset Bars ....................................................................................

30

22

Search Mode .....................................................................................................

31

23

Playback Control Buttons ..................................................................................

32

24

Emergency Agent Window ................................................................................

33

25

Backup Viewer ..................................................................................................

35

26

The Image Has Not Been Altered .....................................................................

36

27

The Image Has Been Altered ............................................................................

37

28

How to Connect the CD-RW Drive to the DX7000 DVR ...................................

38

29

Backup (COPY) Window ...................................................................................

44

30

Storage Indicator is now Labeled BACKUP ......................................................

45

31

How to Connect the External Modem to the DX7000 DVR ...............................

46

LIST OF TABLES

 

A

Video Coaxial Cable Requirements ...................................................................

7

Pelco Manual C682M-E (11/01)

3

(This page intentionally left blank.)

4

Pelco Manual C682M-E (11/01)

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1.Installation and servicing should only be done by qualified service personnel and conform to all local codes.

2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture.

3.The installation method and materials should be capable of supporting four times the weight of the unit and equipment.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

C A U T I O N :

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

NOTE: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Connecting Power source to System Using 110V power source. Make sure power select switch set to 115V(110V use)

Using 220V power source Make sure power select switch set to 230V(220V use)

NOTICE: For U.S.A and Canada regions; use only UL listed CSA labeled detachable power cord, 3-conductor, 18 AWG, SVT or SJT type, plug rounding typeparallel blade, cord connector body-IEC 320 style to mate with appliance inlet on product.

To reduce the risk of fire, use only No.26 AWG or larger telecommunications line cord.

IMPORTANT The only way to disconnect power completely is to unplug the power cord. Make sure at least one end of the power cord is within easy reach so that you can unplug the computer when you need to.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES ACCORD-

ING TO THE MANUFACTURER’S INSTRUCTIONS.

ATTENTION: IL Y A DANGER D’EXPLOSION S’IL Y A REMPLACEMENT INCORRECT

DE LA BATTERIE. REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU MENE TYPE OU D’UN TYPE RECOMMANDE PAR LE CONSTRUCTEUR. METTRE AU REBUT LES

BATTERIES USAGEES CONFORMENENT AUX INSTRUCTIONS DU FABRICANT.

Pelco Manual C682M-E (11/01)

5

DESCRIPTION

The DX7000 Series are high-quality digital video recorders (DVR) that combine the functions of a recorder and multiplexer into a product with versatile recording and playback functions. The units are capable of dual operation and can record and play back video at the same time. All models have an input signal of 120/230 VAC and are NTSC/PAL compatible.

MODELS

DX7008-030 Eight-channel digital video recorder, 30 GB hard drive space DX7008-060 Eight-channel digital video recorder, 60 GB hard drive space DX7008-120 Eight-channel digital video recorder, 120 GB hard drive space

DX7008-180 Eight-channel digital video recorder, 180 GB hard drive space

DX7008-240 Eight-channel digital video recorder, 240 GB hard drive space DX7008-300 Eight-channel digital video recorder, 300 GB hard drive space DX7008-360 Eight-channel digital video recorder, 360 GB hard drive space DX7008-420 Eight-channel digital video recorder, 420 GB hard drive space

DX7008-480 Eight-channel digital video recorder, 480 GB hard drive space

DX7016-060 Sixteen-channel digital video recorder, 60 GB hard drive space DX7016-120 Sixteen-channel digital video recorder, 120 GB hard drive space DX7016-180 Sixteen-channel digital video recorder, 180 GB hard drive space

DX7016-240 Sixteen-channel digital video recorder, 240 GB hard drive space

DX7016-300 Sixteen-channel digital video recorder, 300 GB hard drive space DX7016-360 Sixteen-channel digital video recorder, 360 GB hard drive space DX7016-420 Sixteen-channel digital video recorder, 420 GB hard drive space

DX7016-480 Sixteen-channel digital video recorder, 480 GB hard drive space

The following accessories are supplied with the DX7000 Series DVR:

Qty

Description

1

Keyboard

1

Mouse

1RS-422 communication converter, includes power adapter

19-pin to 25-pin adapter

2Power cables (1 USA standard and 1 European standard)

2Keys for front panel

1Microsoft Windows® 98 CD

1DX7000 Remote Site Software CD

4Mounting screws

WARNING

This product is factory set to operate on 115 VAC.

For 230 VAC operation, move the switch to the 230 VAC position before applying power to the unit.

01204

6

Pelco Manual C682M-E (11/01)

INSTALLATION

NOTE: Set the PAL/NTSC Switch to the proper setting for your application. Refer to

7 .

NOTE: An UPS (Uninterrupted Power Supply) is not supplied with the DVR.

If required, Pelco recommends a device with the following specifications:

Capacity –

350 VA, 210 watts Output voltage –

115 V ± 8% (on battery) Frequency range –

47 Hz to 63 Hz

Place the DVR on any flat surface (desk or table) or install in any standard 19-inch (48.26 cm) wide console or rack configuration.

00589

Figure 1. Rear View of Back Panel

1Camera Inputs – Refer to Table A for video coaxial cable distances.

2Alarm Inputs

3Analog Monitor Output

4Relay Outputs

5PC Monitor Output

6LAN Port (Internet or TCP/IP)

7NTSC/PAL Selection Switches – Setting must correspond with the software setup for NTSC/PAL. Refer to Figure 6, item 2 .

8Joystick Port (Not used)

9Microphone Jack (Not used)

10Audio IN/OUT (Not used)

11COM 2 Serial Port – Connection for optional external modem.

12Printer Port

13COM 1 Serial Port – RS-422 two-wire control output; refer to Figure 2.

14USB Connection – For optional USB device (CD-RW).

15Keyboard (PS/2)

16Mouse (PS/2)

17AC Power Output

18115/230 VAC Power Switch

19AC Power Input

Table A. Video Coaxial Cable Requirements

Cable Type*

Maximum Distance

 

 

RG59/U

750 ft (229 m)

 

 

RG6/U

1,000 ft (305 m)

 

 

RG11/U

1,500 ft (457 m)

 

 

*Minimum cable requirements:

75 ohms impedance All-copper center conductor

All-copper braided shield with 95% braid coverage

Pelco Manual C682M-E (11/01)

7

TWO-WIRE CONTROL SYSTEM INSTALLATION

NOTE: The PTZ must be set to accept ‘D’ protocol control. For information on setting the receiver address for D-type control, refer to the documentation supplied with the PTZ equipment.

1.Connect the control wires from the receiver to the RS-422 converter. The DX7000 can support up to 16 PTZ devices. To connect more than one PTZ to the system, refer to

Figure 3.

RS-422 Converter

Receiver

 

 

TX+

RX+

 

 

TX-

RX-

 

 

2.Set the DTE/DCE switch located on the bottom of the converter to DCE.

3.Plug the RS-422 converter into the 9-pin to 25-pin adapter.

4.Plug the pin converter into the COM 1 Port.

5.Attach the power adapter to the RS-422 converter.

6.Plug power adapter into a power source. The standard European plug is attached to the power adapter. To convert the adapter to the USA standard loosen the Phillips head screw and remove the European plug (refer to Figure 4).

BACK OF DX7000

COM 1 PORT

PIN CONVERTER

RS-422 ADAPTER

POWER ADAPTER

01194

Figure 2. Two-Wire Control System Installation

PHILLIPS HEAD SCREW

EUROPEAN STANDARD

ADAPTOR

USA STANDARD

PTZ

PTZ

PTZ

THE LAST PTZ

 

 

TERMINATE

RXRXTX TX

RX RXTX TX

RXRXTX TX

+ - + -

+ - + -

+ - + -

SUPPORTS UP TO 16 PTZ

 

 

MAXIMUM: 4,000 FEET (1,219 M)

01198

00963

Figure 3. Multiple PTZ Installation

 

Figure 4. Power Adapter Plug for the RS-422 Converter

8

Pelco Manual C682M-E (11/01)

Pelco DX7008-240, DX7016-180, DX7016-060, DX7016-360, DX7016-240 User Manual

PROGRAMMING

Turn the system power ON; the Main Screen (DISPLAY mode) appears.

00582

Figure 5. Display Mode

DISPLAY MODE

1Date and Time Indicator – Displays current date and time.

2SEARCH Button – Plays back and search recordings by date and time.

3SETUP Button – Programs camera settings, customize a recording schedule, set up multiple password levels, and establish pan and tilt protocol.

4PTZ Control Button – Controls pan, tilt, and zoom functions. Sets patterns, tours, and presets.

5Copy Button (Backup) – Only appears if CD-RW software and CD-RW drive are installed.

6Exit – Closes DX7000 program.

7HDD Storage Indicator – Displays percentage of used hard disk storage space.

8Activate Relay – Turns connected relay ON/OFF.

9Alarm Status Display – Turns button color yellow when an alarm has been activated.

10Motion Detection Status – Turns button color blue, indicating motion is detected.

11Screen Division

Single camera display

Quad display, cameras 1-4

Quad display, cameras 5-8

Quad display, cameras 9-12

Quad display, cameras 13-16

Displays cameras 1-9

Displays cameras 10-16

Displays all 16 cameras

Sequencing mode – Sequence using single, four, or nine camera displays.

Full-screen display – Removes menu bars from display. Click the right mouse button to return to previous screen display.

Pelco Manual C682M-E (11/01)

9

DX7000 SYSTEM SETUP

To setup the DX7000 Digital Video Recorder use the left mouse button and click on the SETUP button located in the DISPLAY mode.

CAMERA SETUP

1

2

3

4

01177

Figure 6. Channel Setup Menu

1CAMERA NAME Box

2SIGNAL TYPE – Selection must correspond with the NTSC/PAL selection switch setting. Refer to Figure 1, item 7 .

3CAMERA ENABLE Button

4CAMERA SELECTION Button

Use the following steps to set up a camera site.

1.Click the CAMERA ENABLE button to enable a camera for setup.

2.Click the CAMERA SELECTION button (located above the CAMERA ENABLE button); the camera scene appears in the Camera Viewing Window.

3.Enter the location of the camera in the CAMERA NAME box.

10

Pelco Manual C682M-E (11/01)

COLOR SETUP

1 2

3 4

5

7

6

00959

 

 

Figure 7. Color Setup Menu

1CON – Adjusts the CONTRAST of the viewed and recorded scene.

2BRI – Adjusts the BRIGHTNESS of the viewed and recorded scene.

3RED – Adjusts the RED level of the viewed and recorded scene.

4GREEN – Adjusts the GREEN level of the viewed and recorded scene.

5BLUE – Adjusts the BLUE level of the viewed and recorded scene.

6DEFAULT COLOR – Return all level settings to their defaults.

7Image Alignment Buttons – Moves the image up, down, left, and right within a channel frame to align multi-screen images.

If required, adjust the level settings of the picture.

1.Select a camera by scrolling through the selections in the CHANNEL box.

2.Adjust the viewed image using the level settings.

3.Align image in the image frame using the Image Alignment buttons.

Pelco Manual C682M-E (11/01)

11

SCHEDULE SETUP

1 2

3

9

4

5

6

8

7

01201

Figure 8. Schedule Setup Menu

1GROUP (01-24)Selects group to be scheduled.

2Sets START TIME and END TIME for recording group.

3Schedule Selection Buttons

CLEAR ALL SCHEDULE – Clears all GROUP (1-24) schedules.

FULL RECORD – Adds all cameras and days to GROUP 1.

SENSOR TO CAMERA – Automatically selects the camera sensor for a GROUP in a one-to-one ratio (Camera 1, Sensor 1, Group 1).

4DAY OF WEEK – Selects the days of the week a selected GROUP will record.

5CAMERA, MOTION, SENSOR, AND ALARM Buttons – Selects the camera, recording triggers, and relay outputs for the selected GROUP.

6REMOTE ALARM – Notifies remote site if alarm is triggered.

7TARGET IP ADDRESS – Inputs address of remote site. Use with Emergency Agent software.

8AUTO REBOOT – Sets the day and time system will reboot.

9GROUP INFORMATION – Lists schedule conflicts between groups.

12

Pelco Manual C682M-E (11/01)

Evaluate the flow of motion at the surveillance site before programming a schedule. A recording schedule can consist of one of the following modes and/or a combination of all modes:

NORMAL – Continuous recording recommended for surveillance areas with a lot of movement.

MOTION – Saves disk space; records only when motion is detected. SENSOR – Saves disk space; records only when an alarm is activated.

Example Schedule 1

Record 4 cameras with motion detection from Monday to Friday,

8:00 AM - 6:00 PM; Saturday 8:00 AM - 2:00 PM; and no recording on Sunday.

1.Select GROUP 01 and set START TIME to 8:00 and END TIME to 18:00.

2.Check MON, TUE, WED, THU, and FRI in the DAY OF WEEK section.

3.Select 01, 02, 03, and 04 in the CAMERA section.

4.Select 01, 02, 03, and 04 in MOTION section.

5.Select GROUP 02 and set the START TIME to 8:00 and END TIME to 14:00.

6.Check SAT in the DAY OF WEEK section.

7.Select 01, 02, 03, and 04 in CAMERA section.

8.Select 01, 02, 03, and 04 in MOTION section.

9.Select GROUP 03 and set END TIME at 8:00.

Example Schedule 2

Record continuously all week. When a signal input is received from sensor 1, camera 1 starts recording and relay 1 starts operating. A signal input from sensor 2 starts cameras 2 and 3 recording.

1.Select GROUP 01 and set START TIME to 0:00 and END TIME to 0:00.

2.Check SUN, MON, TUE, WED, THU, FRI, and SAT in the DAY OF WEEK

3.Select 01 in CAMERA and 01 in SENSOR and 01 in RELAY.

4.Select GROUP 02 and set START TIME to 0:00 and END TIME to 0:00.

5.Check SUN, MON, TUE, WED, THU, FRI, and SAT in the DAY OF WEEK.

6.Select 02 and 03 in CAMERA and 02 in SENSOR

Pelco Manual C682M-E (11/01)

13

SPEED SETUP

1

11

2

 

3

10

4

5

 

6

9

8

7

01203

Figure 9. Speed Setup Menu

1RECORDING SPEED MODE

a.NORMAL – Sets recording speed for continuous recording.

b.MOTION – Sets motion detection and pre-alarm recording speeds.

c.SENSOR – Sets sensor detection and pre-alarm recording speeds.

2IMAGE QUALITY – Sets the compression size of the recorded image.

3MOTION EXT. DURATION – Records time after motion is detected.

4SENSOR EXT. DURATION – Records time after a sensor is triggered.

5SWITCH SPEED – Sets the sequencing time between cameras connected to monitor output.

6WRITE INTERVAL – Determines how long images are stored in the buffer before written to the hard drive.

7BACKUP – Only available when backup device is installed.

8DUPLEX MODE – Records and plays back recordings at the same time.

9USE MODEM – Only available if modem is recognized.

10 RECORDING AND PRE-ALARM FUNCTION SPEEDS

a.Recording Speed: Controls the recording rate of each camera separately by adjusting the control bar for each individual camera. The total available fps for all cameras varies per mode setup.

In Duplex Mode the maximum recording speed is 60 fps.

In Simplex Mode the maximum recording speed is 160 fps.

b.PreAlarm Function: You can program the pre-alarm function for motion and sensor recording modes. When event (motion or sensor) is detected, images are recorded for the specific duration (5 seconds maximum per camera) before an event happens.

11A – Average recording rate for all cameras (1 through 16). All cameras record at the same fps.

14

Pelco Manual C682M-E (11/01)

MOTION DETECTION SETUP

1

2 3

4

01192

 

Figure 10. Motion Detection Setup Menu

1BEEP – Beeps when motion is detected.

2SENSITIVITY – Adjusts the sensitivity of the detection areas.

3CLEAR ALL BLOCK – Deletes all motion detection area blocks.

4Motion Detection Area – To select a detection area move the pointer to the desired area. Hold down the left mouse button and drag over the area. Release the left mouse button to end selection. A maximum of 10 detection areas can be set per camera.

Pelco Manual C682M-E (11/01)

15

PASSWORD SETUP

1

2

3

4

5

01195

Figure 11. Password Setup Menu

1SELECT LEVEL – Levels include Administrator, Search User, PTZ/Backup User, and Client User.

2INPUT AREA – Password input window.

3NUMBER BUTTONS – Use number buttons to input password.

4ENTER – Select to apply password to level.

5CLEAR – Clears password input area.

To set a password:

1.Select the level.

2.Press the number buttons to input a password.

3.Click the ENTER button to apply the password input.

To clear a password:

1.Select the level.

2.Press the CLEAR button.

3.Click the ENTER button to apply the password input.

16

Pelco Manual C682M-E (11/01)

Loading...
+ 36 hidden pages