Paxar AC Adapter Monarch 6063TM User Manual

Size:
147.84 Kb
Download

A C A D A P T E R O P E R AT I N G

I N S T R U C T I O N S

The Monarch® 6063™ AC Adapter provides continuous power to your Monarch® Pathfinder® Ultra® Silver 6032™ and the Monarch® Pathfinder® Ultra®Platinum 6039™ printers. You can use the adapter instead of a rechargeable battery. The adapter plugs into any standard grounded electrical outlet and allows you to print large volumes of labels without switching or recharging the battery.

 

New Door

Power Supply

Adapter Pack

Power Cord

 

K i t C o n t e n t s

The AC Adapter kit comes with

a new battery compartment door with a notch in it.

a power cord (domestic models only).

an adapter pack.

a power supply.

TC6063OI Rev. AD 1/08 ©2008 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All Rights Reserved.

I n s t a l l i n g t h e A d a p t e r

To install the adapter:

1. Press the button on the battery compartment door (located at the bottom of the printer’s handle) and slide it open, pulling firmly. Pull the door completely off the printer and lay it aside.

2. Pull the battery out of the compartment. Or, place your hand beneath

Battery

Compartment

Door

Button

the printer, turn the printer upright, and catch the battery in your hand as it slides out.

3. Insert the adapter pack (connector end first) into the printer’s battery compartment.

Battery

2 Installing the Adapter

4. Pushing firmly, put the new battery compartment door on the printer. The adapter pack cord should stick out of the notch in the door.

5. Connect the adapter pack and the power supply by lining up the connectors and screwing them together.

Notch

6. Plug the power cord into the power supply.

7. Plug the other end of the power cord into a grounded electrical outlet.

Installing the Adapter 3

Visit www.paxar.com for sales, service, supplies, information, and telephone numbers for our locations throughout the world.

TOLL FREE:

1-800-543-6650(U.S.A.)

1-800-363-7525(Canada)