Panasonic SC-AK14 User Manual

0 (0)
Panasonic SC-AK14 User Manual

CD Stereo System

Operating Instructions

Model No. SC-AK14

Before connecting, operating or adjusting this product, please read these instructions completely.

Please keep this manual for future reference.

 

P

RQT5539-P

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

These operating instructions are applicable to the following system.

 

 

System

SC-AK14

 

 

Main unit

SA-AK14

 

 

 

 

 

 

Speakers

SB-AK18

using

 

 

 

 

 

The model number and serial number of this product can be

Before

 

found on either the back or the bottom of the unit.

 

 

 

 

Please note them in the space provided below and keep for

 

 

future reference.

 

 

MODEL NUMBER

 

 

 

 

 

 

SERIAL NUMBER

 

 

 

 

 

User memo:

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIPPING OR MOISTURE.

2

Table of contents

 

Before using

 

Supplied accessories ..............................................

2

Precautions ..............................................................

4

Placement of speakers ............................................

5

Concerning the remote control ..............................

5

Battery installation ..........................................................

5

Correct method of use ...................................................

5

Connections .............................................................

6

Basic connections (for supplied accessories) .................

6

Optional antenna connections ........................................

7

External unit connection .................................................

7

Front panel controls ................................................

8

Turning the demo function off ..............................

10

ECO mode ..............................................................

10

Auto-off function ....................................................

10

Setting the time ......................................................

11

Convenient functions ............................................

11

Radio operations

 

Presetting radio broadcasts .................................

12

Listening to radio broadcasts ...............................

13

Compact disc operations

 

Concerning compact discs ...................................

14

Listening to compact discs ..................................

15

Direct access play ........................................................

16

Repeat play ..................................................................

16

Random play ................................................................

16

Program play ...............................................................

17

To listen to special CDs and tracks

 

(CD Manager function) ..............................................

18

Cassette deck operations

 

Listening to tapes ..................................................

19

Concerning cassette tapes ...................................

20

Supplied accessories

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when asking for replacement parts.

To order accessories contact 1-800-332-5368 or web site (http://www.panasonic.com).

AC power supply cord . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.

(RJA0065-A)

FM indoor antenna (RSA0006-J) . . . . . . . . . . . . . . . . . . 1 pc.

RQT5539

Recording operations

 

Before recording (Deck 2 only) ............................

21

Tape-to-tape recording ..........................................

21

Recording from radio broadcasts ........................

22

Recording from compact discs ............................

23

To record special CDs and tracks

 

(CD Manager function) .............................................

24

Sound quality/sound field operations

Using the built-in sound quality/

 

sound field settings ..........................................

25

Adding bass ...........................................................

25

Varying the sound quality with the manual

equalizer ............................................................

26

Varying the sound quality with

 

the acoustic image (Al) equalizer ....................

26

Timer operations

 

Using the timer ......................................................

27

Using the play/record timer ..........................................

27

Using the sleep timer ...................................................

29

Reference

 

Using an external unit ...........................................

29

Troubleshooting guide ..........................................

30

Maintenance ...........................................................

31

Specifications .........................................

Back Cover

Product service .......................................

Back Cover

AM loop antenna

 

 

...........Batteries

2 pcs.

.....................(RSA0029)

1 pc.

 

(R6, AA, UM-3)

 

Remote control transmitter (EUR648200) ........................

1 pc.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

¡Reorient or relocate the receiving antenna.

¡Increase the separation between the equipment and receiver.

¡Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

¡Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Before using

3

RQT5539

Before using

PRECAUTIONS

Before using this unit please read these operating instructions carefully. Take special care to follow the warnings indicated on the unit itself as well as the safety suggestions listed below.

Afterwards keep them handy for future reference.

Safety

1.Power Source —The unit should be connected to power supply only of the type described in the operating instructions or as marked on the unit.

2.Polarization—If the unit is equipped with a polarized AC power plug (a plug having one blade wider than the other), that plug will fit into the AC outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

3.Power Cord Protection—AC power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Never take hold of the plug or cord if your hand is wet, and always grasp the plug body when connecting or disconnecting it.

4.Nonuse Periods—When the unit is not used, turn the power off. When left unused for a long period of time, the unit should be unplugged from the household AC outlet.

Installation

Environment

1.Outdoor Antenna Grounding—If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical

Code, ANSI/NFPA No. 70-1990, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure below.

 

ANTENNA LEAD

 

IN WIRE

 

GROUND

 

CLAMP

 

ANTENNA

ELECTRIC

DISCHARGE UNIT

SERVICE

(NEC SECTION 810-20)

EQUIPMENT

 

 

GROUNDING CONDUCTORS

 

(NEC SECTION 810-21)

 

GROUND CLAMPS

 

POWER SERVICE GROUNDING

 

ELECTRODE SYSTEM

 

(NEC ART 250, PART H)

NEC–NATIONAL ELECTRICAL CODE

2.Water and Moisture—Do not use this unit near water—for example, near a bathtub, washbowl, swimming pool, or the like.

Damp basements should also be avoided.

3.Heat—The unit should be situated away from heat sources such as radiators and the like.

It also should not be placed in temperatures less than 5°C (41°F) or greater than 35°C (95°F).

4.Condensation—Moisture may form on the lens in the following conditions...

immediately after a heater has been turned on.

in a steamy or very humid room.

when the unit is suddenly moved from a cold environment to a warm one.

If moisture forms inside this unit, it may not operate properly. To correct this problem, turn on the power and wait about one hour for the moisture to evaporate.

Placement

1.Ventilation—The unit should be situated so that its location or position does not interfere with its proper ventilation. Allow 10 cm (4" ) clearance from the rear of the unit.

2.Foreign Material—Care should be taken so that objects do not fall into and liquids are not spilled into the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration, or shock.

3.Magnetism—The unit should be situated away from equipment or devices that generate strong magnetic fields.

4.Stacking—Do not place heavy objects, other than system components, on top of the unit.

5.Surface—Place the unit on a flat, level surface.

6.Carts and Stands—The unit should be used only with a cart or stand that is recommended by the manufacturer.

The unit and cart combination should be moved with care. Quick stops, excessive force, and un-

even surfaces may cause the unit and cart combination to overturn.

7.Wall or Ceiling Mounting—The unit should not be mounted to a wall or ceiling, unless specified in this operating instructions.

Maintenance

(See page 31 for details.)

Clean the cabinet, panel and controls with a soft cloth lightly moistened with mild detergent solution.

Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

Service

1.Damage Requiring Service —The unit should be serviced by qualified service personnel when:

(a)The AC power supply cord or the plug has been damaged; or

(b)Objects have fallen or liquid has been spilled into the unit; or

(c)The unit has been exposed to rain; or

(d)The unit does not appear to operate normally or exhibits a marked change in performance; or

(e)The unit has been dropped, or the enclosure damaged.

2.Servicing —The user should not attempt to service the unit beyond that described in the operating instructions. All other servicing should be referred to an authorized service personnel.

For the address of an authorized servicenter: In the U.S.A. 1-800-211-7262 or web site (http://www.panasonic.com)

4

RQT5539

 

 

Concerning the remote control

 

 

 

Listening caution

 

Battery installation

 

 

 

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing.

We recommend you to avoid prolonged exposure to excessive noise.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

Start your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

Once you have established a comfortable sound level:

Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.

Placement of speakers

channel

R6, AA, UM-3

1

2

Insert the batteries observing the correct polarities (e, d).

Use of batteries

Align the poles (+ and –) properly when inserting the batteries.

Do not mix old and new batteries or different types of batteries.

Do not recharge ordinary dry cell batteries.

Do not heat or disassemble the batteries. Do not allow them to contact flame or water.

Remove the batteries if the unit is not to be used for a long time.

Do not keep together with metallic objects such as necklaces.

Do not use batteries if the covering has been peeled off.

Do not use rechargeable type batteries.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any part of your body.

Correct method of use

Remote control signal sensor

30°

30°

Transmission

 

window

About 7 meters in front of

the signal sensor

 

Operation notes

 

 

 

 

system

for

 

place

 

them near televisions, personal computers or other devices easily

 

influenced by magnetism.

To avoid damage to the speakers, do not touch the speakers cones if you have taken the nets off.

Do not place obstacles between the remote control signal sensor and remote control unit.

Do not expose the remote control signal sensor to direct sunlight or to the bright light of a fluorescent light.

Take care to keep the remote control signal sensor and end of the remote control unit free from dust.

If this system is installed in a rack with glass doors, the glass doors’ thickness or color might make it necessary to use the remote control a shorter distance from the system.

To prevent damage

Never place heavy items on top of the unit.

Do not disassemble or reconstruct the unit.

Do not spill water or other liquids into the unit.

Before using

5

RQT5539

 

 

Connections

 

 

Basic connections (for supplied accessories)

 

 

Plug the AC power cord into a household AC outlet only after all

 

1

other connections have been made.

 

To prepare the antenna wires and speaker cords, twist the vinyl

 

 

2

cover tip and pull off.

 

 

 

using

 

3

 

 

Before

 

 

Connect the FM indoor antenna.

 

 

 

 

 

 

Tape the antenna to a wall or column, in a position where radio

 

 

 

signals are received with the least amount of interference.

 

 

4

 

Note

 

 

For best reception sound quality:

 

 

 

1

 

 

An FM outdoor antenna is recommended. (See page 7.)

 

 

Connect the AM loop antenna.

 

 

 

After attaching the antenna, turn on the system and tune in a

 

 

Adhesive tape

broadcast station. Then, turn the antenna to the angle of best

 

 

 

reception and least interference.

 

 

FM indoor antenna

Connect the speaker cables.

FM

)

Connect each end of the speaker cables to the terminal lever of

(

ANT

 

 

 

 

 

the same color.

1

GND

 

 

 

 

 

 

 

 

Caution

 

2

 

Use only the supplied speakers.

 

 

 

 

 

 

 

The combination of the main unit and speakers provide the

 

 

 

 

best sound. Using other speakers can damage the unit and

2

 

 

 

sound quality will be negatively affected.

 

 

To prevent damage to circuitry, never short-circuit positive (+)

 

 

 

and negative (–) speaker wires.

 

 

 

 

Caution

 

 

AM loop

 

Use the speakers only with the re-

AM

ANT

 

commended system.

 

 

LOOP

antenna

 

Failure to do so may lead to damage to the

 

EXT

 

 

 

 

 

amplifier and/or the speakers, and may result

 

 

 

 

 

 

 

 

in the risk of fire.

 

 

 

 

Consult a qualified service person if damage

 

 

 

 

has occurred or if you experience a sudden

3

 

 

 

change in performance.

 

 

 

Do not attach these speakers to walls or

 

 

 

ceilings.

 

 

 

Connect the AC power cord.

 

 

Red (+)

 

Note

 

 

 

The included AC power supply cord is for use with this unit

 

 

 

only. Do not use it with other equipment.

 

 

Black (–)

 

 

6

RQT5539

A

FM outdoor antenna

(not included)

75 Ω coaxial cable (not included)

 

 

1

FM

ANT

30 mm

)

(

 

(1 3/16˝)

 

GND

 

2

 

 

Shield braid

15 mm (19/32˝)

3

Core wire

B

AM outdoor antenna (not included)

 

 

5

-12 m

 

 

(16

– 40 ft.)

AM

ANT

 

 

 

 

 

 

LOOP

 

AM loop antenna

 

EXT

 

 

 

 

(included)

C

Analog player (not included)

Connections

Optional antenna connections

You may need an outdoor antenna if you use this system in a mountainous region or inside a reinforced-concrete building, etc.

FM outdoor antenna A

Disconnect the FM indoor antenna if an FM outdoor antenna is installed.

1 Remove a piece of the outer vinyl insulator.

2 Twist the shield braid.

3 Expose the core wire.

Note

An outdoor antenna should be installed by a qualified technician only.

AM outdoor antenna B

Connect the outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a window or other convenient location.

Note

When the unit is not in use, disconnect the outdoor antenna to prevent possible damage that may be caused by lightning. Never use an outdoor antenna during an electrical storm.

External unit connection

C

 

 

 

An analog player with a built-in phono equalizer can be connected.

For details, refer to the instruction manual of the units which are to be connected.

When units other than those described above are to be connected, please consult with your audio dealer.

Before using

(R) (L)

R L

Rear panel of this unit

7

RQT5539

 

A

 

 

 

 

1

8

 

 

9

 

 

2

 

 

 

 

 

3

10

using

 

11

 

4

 

12

 

 

 

 

5

Before

 

15

 

 

 

13

 

6

 

14

 

 

 

 

 

 

16

 

7

 

17

B

18 19 20 21

22

23

24

25

26

27

28

8

Front panel controls

 

Main unit A

 

No.

Name

Ref. page

1

MODE button (NORMAL/ECO) (MODE)

................... 10

2

Standby/on switch (f/I, POWER) .............................

10

 

Press to switch the unit from on to standby mode or vice versa.

 

In standby mode, the unit is still consuming a small amount of

 

power.

 

3AC supply indicator (AC IN)

This indicator lights when the unit is connected to the AC mains supply.

4Play timer/record timer button and indicator

 

(rPLAY/rREC) ..........................................................

27

5

Clock/timer button

 

 

(CLOCK/TIMER) ..............................................

11, 27, 28

6

Display

 

7

Deck 1 cassette holder ..............................................

19

8

Disc direct play, open/close buttons and indicators

 

(CD 1 ~ CD 5, c) ........................................................

15

9

CD manager button

 

 

(CD MANAGER) ...................................................

18, 24

! Random play button (RANDOM) ..............................

16

 

Disc tray

 

# Display select/demonstration button

 

 

(-DISP/–DEMO) ....................................................

10, 11

$ V.BASS on/off button (V.BASS) ...............................

25

% Volume control (VOLUME) .......................................

13

& 3D AI EQ button (3D AI EQ) .....................................

26

( Headphone jack (PHONES) ......................................

29

) Deck 2 cassette holder ..............................................

19

Center console B

 

No.

Name

Ref. page

~ Tape/deck select button (TAPE, DECK 1/2) ............

19

+ CD button (CD) ...........................................................

18

, Tuner/band select button (TUNER, BAND) .............

12

- AUX button (AUX) ......................................................

29

. Deck 1 open button (c DECK 1 OPEN) ..................

19

/ Basic operating buttons

 

 

Functions change according to the source.

 

: Tape edit button (TAPE EDIT) ..................................

21

; Recording start/stop button (a REC/STOP) ............

22

< Reverse mode select button (REV MODE) ..............

19

= Deck 2 open button (c DECK 2 OPEN) ..................

19

> Sound equalizer control (SOUND EQ) .....................

25

RQT5539

2

29

30

31

32

18

19

33

15

13

34

14

35

36

37

10

38

21

20

39

40

41

Front panel controls

Remote control

Buttons such as 2 functions in exactly the same way as the buttons on the main unit.

No.

Name

Ref. page

 

 

2

Standby/on button (f) ...............................................

10

 

 

 

? Auto off button (AUTO OFF)

10

 

 

 

using

@ Numeric buttons (10, 1–0)

13, 16

 

 

 

 

[ Program button (PROGRAM) ...................................

17

 

 

Before

\ Cancel button (CANCEL)

17

 

 

 

 

 

~ Tape/deck select button (TAPE) ..............................

19

 

 

 

...........................................................+ CD button (CD)

18

 

 

 

] EQ select button (EQ) ................................................

25

 

 

 

& 3D AI EQ select button (3D AI) ................................

26

 

 

 

...............................$ V.BASS on/off button (V.BASS)

25

 

 

 

^ Reverse side playback/preset channel

 

 

 

 

 

.............................................select button (//3)

13, 19

 

 

 

% Volume buttons (– VOLUME +) ................................

13

 

 

 

_ Sleep button (SLEEP) ................................................

29

 

 

 

...........................................{ Muting button (MUTING)

11

 

 

 

| Disc button (DISC) .....................................................

16

 

 

 

! Random button (RANDOM) ......................................

16

 

 

 

} Repeat button (REPEAT) ...........................................

16

 

 

 

- AUX button (AUX) ......................................................

29

 

 

 

, Tuner/band select button (TUNER) .........................

12

 

 

 

V Skip/search buttons (g/(, )/f) ........

15, 20

 

 

 

0 Play/pause/preset channel select

 

 

 

 

 

button (-/J/4) ..............................................

13, 15, 19

 

 

 

1 Stop button (L) ....................................................

15, 19

 

 

 

 

 

 

 

 

 

9

RQT5539

A

Before using

B

Turning the demo function off A

If the clock has not been set, a demonstration of the display is shown when the unit is switched to standby.

This function is set to on at the time of purchase.

Turn this function off to get the most from the eco mode (see below).

Press and hold [-DISP/–DEMO] until “NO DEMO” is displayed.

The display changes each time the button is held down. NO DEMO (off) ↔ DEMO (on)

ECO mode B

When this mode is used, the display remains blank when the unit is switched to standby mode and the power consumed is reduced to

0.25 W from a maximum of 18 W.

The mode is set to on at the time of purchase.

 

 

 

 

 

Condition in standby

Display

Power consumption

 

 

 

 

 

ECO mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

off

clock

18 W

 

 

 

 

 

 

 

 

 

 

 

 

 

on

blank

0.25 W

 

 

 

 

 

 

 

 

Note

To get the most from this mode, turn the demo function off or set the clock.

Turning ECO on and off

Press [f/7, POWER] to turn the unit on.

Press [MODE].

The current ECO mode is displayed. Press again to change the mode.

The display changes each time the button is pressed.

NORMAL (off) ↔ ECO (on)

The eco mode can be turned on if the unit is in standby but it cannot be turned off.

Conserving Power

The unit consumes 0.25W even when it is turned off with [f/7, POWER] or Auto-off function and ECO mode is turned on. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. Remember to reset the radio stations and any other memory items before using the unit again.

C

10

Auto-off function C

by remote control only

When CD or tape is selected as the source

To save power, the unit turns off if it is left unused for four minutes.

Note

This function does not work if the source is tuner or AUX.

Press [AUTO OFF].

“AUTO OFF” is shown on the display.

To cancel

Press [AUTO OFF] again to clear “AUTO OFF” from the display.

For your reference

The setting is maintained even if the unit is turned off. When the unit is turned on again, “AUTO OFF” is displayed and the unit functions as described above.

“AUTO OFF” disappears from the display if either tuner or AUX is selected as the source but continues to function normally.

“AUTO OFF” remains displayed if CD or tape is selected as the source.

RQT5539

Loading...
+ 22 hidden pages