Panasonic PT 52LCX66, PT-61LCX16, PT 56LCX66, PT-56LCX16, PT-61LCX66 User Manual

...
0 (0)
Multimedia Projection HDTV
Operating Instructions
Models No.
PT-52LCX66/PT-56LCX66/PT-61LCX66/ PT-52LCX16/PT-56LCX16/PT-61LCX16
(USA)
For assistance, please call : 1-888-VIEW PTV(843-9788)
or, contact us via the web at: http://www.panasonic.com/contactinfo
(Puerto Rico)
For assistance, please call : 787-750-4300
or visit us at www.panasonicpr.com
Three Important Reasons to Register Your Product Immediately!
1 Protect Your New Investment...
Register your new Projection Display for insurance purposes
in case your new Projection Display is stolen.
2 Product safety notification...
Registering your product can help us to contact you in the
unlikely event a safety notification is required under the Consumer Product Safety Act.
3 Improved Product Development...
Help us continue to design products that meet your needs. Register online at www.panasonic.com/register
* The presence of the DTV certification mark indicates that this product will
successfully receive digital television transmissions that conform to any and all of the
ATSC CERTIFIED *
DIGITAL TELEVISION
This operating instruction book is designed for use with models PT-52LCX66, PT-56LCX66, PT-61LCX66, PT-52LCX16, PT-56LCX16 and PT-61LCX16. Illustrations in this manual show the PT-56LCX16.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
video formats described in the ATSC Digital Television Standard.
As an ENERGY STAR® Partner, Panasonic Corporation of North America has determined that this product or product model meets the
for energy efficiency.
ENERGY STAR
®
guidelines
LSQT1060 B

IMPORTANT SAFETY INSTRUCTIONS

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
The pictorial representation of a hot surface within a triangle is intended to tell the user that parts inside the product are a risk of burns to persons.
Note to CATV System Installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
WARNING
To reduce the risk of electric shock, fire, injury to persons or damage to this product:
1) Read these instructions before using, connecting or adjusting this product.
2) Keep these instructions for future reference.
3) Heed all warnings on the product and in this Operating Instructions manual.
4) Follow all instructions carefully.
5) Do not use this apparatus near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool, and the like. Do not place objects filled with water, such as a vase or the like, on top of this unit.
6) Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Openings in the cabinet are provided for ventilation to ensure reliable operation and to protect it from overheating. Never block openings by placing the product on a bed, sofa or similar surfaces.
8) Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produces heat. Do not install in a built-in installation such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) Because the temperature of the lamp unit is elevated immediately after its use, a direct touch to it may cause burns. Replace the lamp unit only after it has cooled.
2
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
WARNING
AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE THE SD CARD.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH WATER, SUCH AS A VASE OR THE LIKE, ON TOP OF THIS APPARATUS.
CAUTION
(1) This Projection Display is intended to be used with the following TV stand: model TY-52LC66 for the PT-52LCX66
or PT-52LCX16, TY-52LC16 for the PT-52LCX66 or PT-52LCX16, TY-56LC66 for the PT-56LCX66 or PT-56LCX16, TY-56LC16 for the PT-56LCX66 or PT-56LCX16, and TY-61LC66 for the PT-61LCX66 or PT-61LCX16. Use with other stands may result in the Projection Display becoming unstable, possibly causing injury.
(2) This Projection Display should not be exposed to direct sunlight, extreme temperatures or moisture, as this can
result in serious irreparable damage.
(3) This Projection Display has a High Intensity Discharge (HID) lamp that contains a small amount of mercury. It also
contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org.>
The Lamp is a consumable item and has a limited life. The lamp should be changed as soon as possible once the lamp warning message appears. (p. 64) If the lamp is damaged, please contact your nearest dealer.
Getting Start ed
Due to the characteristics and use conditions of in di vid u al lamps, the lamp may cease to light before the stated lamp life. Influences of fre quent light ing, continuous light use for over 24 hours, the number of times lit, the length of time between lightings, etc. may shorten lamp life. (Because of this, we recommend having a replacement lamp on hand.)
Trademarks
• VGA and XGA are trademarks of International Business Machines Corporation.
• Macintosh is a registered trademark of Apple Computer, USA.
• SVGA is trademark of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
• Equipped with -TV Noise Reduction for true MTS reproduction. -TV Noise Reduction is required for good stereo separation and audio fidelity.
HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
SD Logo is a trademark.
License description: To view the license information for software used in this product, press MENU button and select “Setup”“About”“License”. (p. 55)
Note:
• Do not allow a still picture to be displayed for an extended period, as this can cause a permanent afterimage to remain on this unit. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
is a registered trademark, and is licensed by Technology Licensing.
Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
3
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Projection Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and record the serial number of your set in the space provided on the rear cover of these instructions.
Visit our Panasonic Web Site for USA : www.panasonic.com
(USA)
For assistance, please call : 1-888-VIEW PTV(843-9788)
or, contact us via the web at: http://www.panasonic.com/contactinfo
(Puerto Rico)
For assistance, please call : 787-750-4300
or visit us at www.panasonicpr.com
FCC STATEMENT:
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
ANY CHANGES OR MODIFICATIONS TO THIS PTV RECEIVER NOT EXPRESSLY APPROVED BY PANASONIC CORPORATION OF NORTH AMERICA COULD CAUSE HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT.
The Class insulation symbol (square within a square) indicates that this product has been evaluated and tested to comply with Class insulation requirements.
Declaration of Conformity
Models Number: PT-52LCX66/PT-56LCX66/PT-61LCX66/PT-52LCX16/PT-56LCX16/PT-61LCX16 Trade Name: Panasonic Responsible party: Panasonic Corporation of North America Address: One Panasonic Way Secaucus New Jersey 07094 Telephone number: 1-888-VIEW PTV(843-9788) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo

Table of Contents

To
Start !
Use
Now !
IMPORTANT SAFETY INSTRUCTIONS ...............................................2
Before Using ..............................................................................................6
Location of Controls .................................................................................9
Installation ................................................................................................12
Power ON / OFF .......................................................................................24
Basic Menu Navigation ...........................................................................26
Tuning channels ......................................................................................28
Projection Display operation ..................................................................32
ASPECT Controls ....................................................................................36
Getting Start ed
Basic Operation InformationAdvanced Op er a tionGetting Start ed
Enjoy
More !
Other Information !
Picture Adjustments................................................................................37
Audio Adjustments ..................................................................................40
Sleep Timer Feature ................................................................................42
Lock Feature ............................................................................................43
Photo Viewer ............................................................................................47
Setup Features ........................................................................................52
Operating Peripheral Equipment ...........................................................58
Remote Control Operation/Code List ....................................................59
Warning Indicators ..................................................................................63
Replacing the lamp unit ..........................................................................64
Troubleshooting ......................................................................................66
Specifications ..........................................................................................68
Cleaning ...................................................................................................69
Customer Services Directory .................................................................70
Limited Warranty .....................................................................................71
Other Information ....................................................................................72
Index .........................................................................................................79
5

Before Using

Receiver Location
This Projection Display is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce Remote Control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video / Audio connection between components can be made with shielded video and audio cables. For best performance, video cables should utilize 75 Ω coaxial shielded cables. Cables are available from your dealer or electronic supply house. Before you purchase any cables, be sure you know what type of output and input connectors your various com po nents require. Also determine the length of cable you’ll need.
Accessories
1. Remote Control (EUR7613ZH0)
2. Batteries 2 “AA”
Viewing position
To optimize your viewing comfort, please follow the viewing guidelines shown in the diagrams below. If viewing for an extended period of time, sit as far back from the screen as possible.
<Top view>
70º
Safety Precaution
Please take safety precautions to prevent the unit from falling over.
WARNING
The unit may tip or fall if not situated on a stable surface, if pushed or during an earthquake. Use a strong rope or chain (not included) to fasten the Projection Display firmly to a strong wall support.
70º
At least 1.8 m (PT-52LCX66/PT-52LCX16) / 2.0 m (PT-56LCX66/PT-56LCX16) / 2.2 m (PT-61LCX66/ PT-61LCX16).
<Side view>
30º
30º
At least 1.8 m (PT-52LCX66/PT-52LCX16) / 2.0 m (PT-56LCX66/PT-56LCX16) / 2.2 m (PT-61LCX66/ PT-61LCX16).
6
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Remote Control Battery Installation
Requires two AA batteries (supplied).
1. Slide the battery cover in direction of arrow.
2. Install batteries in the battery compartment.
• Battery polarity (+) and (-) must match the markings inside the compartment.
Two AA size
Helpful Hints:
(1) Frequent Remote Control users, choose
long-lasting Alkaline batteries as replacements.
(2) Whenever batteries are removed, you may need
to reset Remote Control infrared codes.
We suggest making a note of the codes on page 58 prior to setting up the remote.
Getting Start ed
3. Slide the battery cover until it snaps shut.
CAUTION
Incorrect battery installation can cause the batteries to leak, leading to personal injury and/or damage to the Remote Control.
Observe the following precautions:
1. Always replace batteries with a pair of new ones.
2. Do not combine a new battery with an old one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when the Remote Control acts sporadically or stops operating the Projection Display set.
Reset All Memory Functions
Use when moving unit to a new location, or when First Time Setup needs to be done over.
Press together the VOL- button on the unit and OK button on the Remote Control for more than 3 seconds. Unit shuts itself off when reset is done.
• POWER indicator flashes red. After flashing stops, unplug the unit then plug it back in and turn power ON.
Note:
• When using “Control with HDMI (HDAVI Control)”, with the device connected, set “Ctrl with HDMI” first to “Off” and then “On” using the Setup Menu. (p. 56)
7
Before Using (continued)
Glossary and Acronyms
CC (Closed Caption)
OSD (On-Screen Display)
MSO (Multiple system owner/operator)
Dolby Digital
This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be multichannel audio. A large amount of audio information can be recorded on one disc using this method.
PCM (pulse code modulation)
These are uncompressed digital signals, similar to those found on CDs.
DTV (Digital Television)
Name of the process whereby television picture and sound signals are changed to digital code for receiving and transmitting.
HDTV (High Definition Television)
Television with improved picture quality by increasing vertical and horizontal resolution.
ATSC (Advanced Television Systems Committee)
Standardization body that developed the Digital Television Terrestrial formats.
HDMI (High Definition Multimedia Interface)
Interface that supports every uncompressed digital format as well as all existing multi-channel audio format on a single cable.
JPEG (Joint Photographic Experts Group)
A system used for compressing/decoding color still pictures.
MPAA (Motion Picture Association of America)
Guild governing rating assignments to movies.
NTSC (National Television Systems Committee)
Standardization body that developed the Analog Television Terrestrial formats.
Password
A four (4) digit code a user must provide in order to perform a function.
8
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo

Location of Controls

Illuminated Remote Control
1
2
3
4
5 6
7
8
9
10 11
12
1
POWER Press to turn ON and OFF.
TV
2
VCR, DBS/CBL, DVD
3
VOL -+ / ◄►
4
MENU Press to display Main Menu.
5
TV/VIDEO Changes Input source.
6
RECALL
Sets the remote to control television or digital television.
Sets the remote to control other devices.
Press to adjust TV sound and to navigate menus.
Press to display or delete Channel banner.
13
14
15 16 17 18
19
20
21 22
23 24
SLEEP
9
REW
PLAY
10
SD
11
PAUSE
TV/VCR Press to switch to TV or VCR.
12
ASPECT Changes display aspect ratio.
13
SAP
14
OK
RETURN
15
EXIT Press to exit menus.
16
CH ▲▼
17
FAVORITE
18
MUTE Press to mute sound.
19
PROG
20
FF
21
REC
22
STOP
23
VCR/DBS CH
24
VCR/DBS CH
Sets unit to shut itself off after a preselected amount of time.
While remote is in VCR or DVD mode, press to rewind.
While remote is in VCR or DVD mode, press to play.
Accesses the Photo Viewer feature.
While remote is in VCR or DVD mode, press to pause.
In analog mode, press to access audio modes (Stereo, SAP or Mono). In digital mode, press to access next audio track.
Press to select menu and sub-menu items.
Press to return one step backward in menus.
Press to change channels and to navigate menus.
Press to operate the Favorite channel list function.
Press after entering a digital channel to enter a sub-channel.
While remote is in VCR or DVD mode, press to fast forward.
While remote is in VCR mode, press to record.
While remote is in VCR or DVD mode, press to stop.
<
While remote is in VCR or DBS mode, press to change VCR or
>
DBS channels.
Getting Start ed
7
NUMBER
8
R-TUNE
Press numeric keypad to select any channel or to make alpha-numeric entries in menus.
Press to switch to previously viewed channel or input modes.
9
Location of Controls (continued)
Controls and Terminals on the Projection Display
Front View <Model PT-56LCX16 unit shown>
12 34
POWER
1
button
POWER
2
indicator
TEMP
3
indicator
LAMP
4
indicator
Press to turn ON and OFF. (p. 63, 66)
Lights up green when power is ON. (p. 24, 63)
Flashes when unit internal temperature is abnormal. (p. 63)
Lights up or flashes when the lamp unit is malfunctioning. (p. 63)
Open Door:
Press position 1, and slide Door open as shown by arrow.
Close Door:
Press position 2, and slide Door closed as shown by arrow.
1234 56 87 9
Open
Door
21
Remote Control Sensor
Close
10
10
1
SD CARD Slot Insert SD Card.
S-Video Input
2
Connector 3
Video Input
3
Connector 3
Audio Input
4
Connector 3
5
MENU*
* Buttons listed above operate the same as Remote Control buttons of the same name.
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Connect from other component. (Video 3)
Connect from other component. (Video 3)
Connect from other component. (Video 3)
Press to display Main Menu.
6
OK*
7
TV/VIDEO* Changes Input source.
8
VOL -+ / ◄►*
>
9
10
<
CH
/ ▼▲*
Remote Control Sensor
Press to select menu and sub-menu items.
Press to adjust TV sound and to navigate menus.
Press to change channels and to navigate menus.
Receives infrared signal from Remote Control.
Rear View <Model PT-56LCX16 unit shown>
13 5 7 9 11 1214
Getting Start ed
17
Vent
S-Video/Video Input
1
Connector 1
Audio Input
2
Connector 1
S-Video/Video Input
3
Connector 2
Audio Input
4
Connector 2
Video Out
5
Connector
Audio Out
6
Connector
Component Video
7
Input Connector 1
Audio Input
8
Connector 1
Component Video
9
Input Connector 2
Vent
Connect from other component. (Video 1)
Connect from other component. (Video 1)
Connect from other component. (Video 2)
Connect from other component. (Video 2)
Output video signal.
Output audio signal. (Analog)
Connect from other component. (Component 1)
Connect from other component. (Component 1)
Connect from other component. (Component 2)
2 4 6 8 10 15 16 1813
Audio Input
10
Connector 2
11
HDMI Input Terminal 1
12
13
HDMI Input Terminal 2*
14
PC (RGB) Input
15
Connector
Audio Input
16
Connector
17
VHF/UHF Cable In
DIGITAL AUDIO
18
OUT
* For models PT-52LCX16/PT-56LCX16/PT-61LCX16
Audio 1
Audio/ Video 1
Audio 2
Audio/ Video 2
Connect from other component. (Component 2)
Connect from other component. (HDMI 1)
Connect from other component. (HDMI 1)
Connect from other component. (HDMI 2)
Connect from other component. (HDMI 2)
Connect from PC. (PC)
Connect from PC. (PC)
Input terminal for an antenna or cable box signal.
Output audio signal (Digital)
Notes:
• Make sure the vents are not blocked. (This could cause damage.)
• Indication on the back panel may change without notice.
11

Installation

Notes on con nec tions
• Turn off the power supply for all com po nents before making any connections.
• If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned.
• Read the instruction manual for each system component care ful ly before connecting it.
• If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker. In this case, it will be necessary to connect a TBC (time base corrector).
CAUTION
When using “Nut type” RF coaxial cable, tighten with fingers only. Overtightening may damage terminal.
Connecting the Antenna / Cable to the RF IN Terminal
Antenna Connection
For proper reception of digital and analog VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is recommended.
VHF Antenna UHF Antenna
Mixer
VHF/UHF Cable In terminal on the back of the Projection Display
RF Coaxial Cable
12
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Cable Connection
For proper reception of analog or digital cable channels, a cable service connection is required.
Use this confi guration when connecting the projection display to a cable TV system.
Cable Box
Terminal on the back of the Cable Box
In from cable
Connect the cable from the antenna or cable system to the VHF/UHF Cable In terminal on the back of the Projection Display.
Getting Start ed
In from cable
Notes:
• Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local cable company for its compatibility requirements.
• For reception of cable channels, connect the cable supplied by your local cable company.
Or
13
Installation (continued)
How to connect the “1, 2, 3” Input Terminals
Input 3 is located on the front of the unit. (p. 10)
Connect a VCR or other peripheral equipment
(S-VHS VCR)
S-VIDEO
AUDIO
Similar connections are available at the INPUT 1, 2, 3 input terminals. (p. 10-11)
(VHS VCR)
VIDEO
AUDIO
Similar connections are available at the INPUT 1, 2, 3 input terminals. (p. 10-11)
14
Notes:
• Select the desired VIDEO input position by pressing the TV/VIDEO button. (p. 32)
• When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video input terminal are connected at the same time.
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
How to con nect the COMPONENT VIDEO Input Terminals
Because each Y, PB, and PR signal is input independently, the Component signal allows for more accurate color reproduction. The Component signal output terminal indication will differ according to the output device (Y, PB, PR). Please read the operating instructions included with the output device.
Connecting a DVD Player to COMPONENT VIDEO IN
DVD Player
COMPONENT VIDEO
Getting Start ed
AUDIO
Similar connections are available at the COMPONENT VIDEO INPUT 1-2 Terminals. (p. 11)
Notes:
• Select the desired COMPONENT VIDEO INPUT position by pressing the TV/VIDEO button. (p. 32)
• Component video signals that will be recognized are 480i, 480p, 720p, and 1080i.
Component Signals (Y, PB, PR) that can be Input
Signal data
Mode type
480i 720 × 480 59.94/60.00 480i
480p 720 × 480 59.94/60.00 480p
Signals
DTV Format
Note:
• Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
720p 1 280 × 720 59.94/60.00 720p
* 1080i 1 920 × 1 080 59.94/60.00 1080i
No. of dots
(H × V)
Vertical frequency
(Hz)
Information menu
display
15
Installation (continued)
How to connect the AV OUT Terminals
You can connect a VCR to the AV OUT terminal to record the program you are viewing on-screen. An external monitor can also be connected to the AV OUT terminals. Connect the VCR as shown below.
Recording Equipment (S-VHS /VHS VCR)
VIDEO
AUDIO
Notes:
• This unit contains Video and Audio Outputs for the purpose of recording television programming to VCR. Due to license restrictions, if a device (STB, DVD, etc.) is connected to the HDMI input of the unit, no video or audio output is allowed.
• AV OUT signal is available when receiving digital channel. However, all formats will be down converted to NTSC.
• Never connect the VIDEO IN and OUT terminals to the same video recorder, as this could cause incorrect operation.
• AV terminals will not output Y, PB, PR, PC/HDMI IN or SD card signals.
16
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
How to connect the Amplifier
Analog Audio Out
To listen to the audio through a separate stereo system, connect an external audio amplifier to AUDIO OUT on back of unit.
Stereo System (A Stereo Amplifier and Speakers)
AUDIO
Getting Start ed
Audio Adjustments
• Select Speakers Off in Other adjust menu under Audio menu. (p. 41)
• Set amplifier volume to the preferred level.
Notes:
• AUDIO OUT terminals cannot be connected directly to external speakers.
• AV terminals will not output Component Video, PC/HDMI IN or SD card signals.
17
Installation (continued)
Digital Audio Out
Use the diagram below to connect the Digital Audio Output of your Projection Display to a Dolby Digital decoder.
Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete full-bandwidth channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency Effect) subwoofer channel, For a full Home Theater sound experience, an external Dolby Digital decoder and a multichannel amplifier must be connected to the Digital Audio Out jack on the unit.
Procedure
Connect the Digital Audio cable from the Digital Audio Out jack on the unit to the Digital Audio In connection on the Dolby Digital decoder.
Notes:
• When ATSC channel is selected, the output from the Digital Audio Out jack will be Dolby Digital. But, if NTSC channel is selected, the output will be PCM.
• Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output.
OPTICAL
Firmly connect the cable to the connector.
Amplifier with built in Dolby Digital decoders.
Speakers (example)
Connect three or more speakers for surround sound.
18
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
How to connect the HDMI input terminal
Recommended HDMI Connections
Getting Start ed
Follow the connection diagrams below for HDMI control of a single AV equipment such as a Panasonic DIGA-DVD recorder, RAM Theater or Player Theater system. Refer to page 56 for Setup Menu settings and additional control information.
• Optional HDMI and/or optical cables are not provided.
If connection (or setting) of equipment compatible with HDMI control is changed, switch the power of this unit Off then On again while the power of all equipment is On (to this unit to correctly recognize the connected equipment) and check that DIGA, RAM theater and Player theater playback operates.
Connecting this unit to a DVD recorder, RAM theater or Player theater
• For DIGA:
- Connect with HDMI cable (HDMI
HDMI
• For RAM theater and Player theater:
- Always connect to the HDMI 1
- Connect with HDMI cable and audio
- Connect this unit’s AUDIO OUT
1 is recommended (For models PT-52LCX16/PT-56LCX16/ PT-61LCX16)).
terminal (For models PT-52LCX16/ PT-56LCX16/PT-61LCX16).
cable.
(L&R) to listen to the TV program through the theater system.
AUDIO
HDMI OUT HDMI OUT
AUDIO IN
Or
DIGA (Panasonic DVD Recorder)
Setting this unit after connections
After making connections as shown above, set “Ctrl with HDMI” (under “Other adjust”) first to “Off” and then “On” using the Setup Menu. (p. 56)
Panasonic RAM theater/ Panasonic Player theater
19
Installation (continued)
Connecting this unit to a DVD recorder and AV amp
When using an “Control with HDMI” audio-video amplifier and a compatible DIGA recorder, use a daisy chain connection as shown below.
• One AV amp and one DIGA can be operated with this unit.
• Be sure to connect the AV amp between this unit and the DIGA.
• Always connect to the HDMI1 terminal (For models PT-52LCX16/PT-56LCX16/PT-61LCX16).
HDMI
Optic fiber
HDMI OUT HDMI IN HDMI OUT
(Panasonic AV amp)
OPTICAL
DIGA (Panasonic DVD Recorder)
Setting this unit after connections
After making connections as shown above, set “Ctrl with HDMI” (under “Other adjust”) first to “Off” and then “On” using the Setup Menu. (p. 56)
Notes:
• Individual HDMI devices may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
• When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio. (When connected to an AV amp via HDMI, you will enjoy higher sound quality.) (Current as of March 2006)
• We recommend using Panasonic HDMI cables RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc. (Product numbers correct as of January 2006.)
20
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Procedure
1 Connect the HDMI output on the DVD Recorder or Set Top Box, etc., to the HDMI input on the back of the unit.
• If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal.
2 Press TV/VIDEO to select HDMI input.
By inputting a High-bandwidth Digital Content Protection high-definition picture source to the HDMI IN terminal of this Projection Display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for use with HDMI equipped DVD players, Set top boxes and D-VHS machines.)
Notes:
• Select the HDMI input position by pressing the TV/VIDEO button. (p. 32)
• The HDMI IN terminal can only be used with 1080i, 720p, 480p and 480i picture signals.
• If there is no audio, check if the source equipment has PCM output. If not, please use analog connections.
• Be sure HDMI is securely connected. If not, picture noise and/or incorrect picture display may result.
• With HDMI connection, depending on the signal, the picture may be displayed with unnatural colors (as if red and blue are reversed). Refer to “Color corr.” on page 39.
• If the external device has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable*1.
• When the DVI to HDMI adaptor cable*1 is used, connect the audio cable to the audio input terminal.
*1 Enquire at your local digital device retailer shop.
Compatible formats
Video Signal: The Projection Display is compatible with following formats. Please set the connected device to following one of the formats.
Getting Start ed
Display mode No. of dots
1080i 1920 × 1080 59.94 / 60 1080i
720p 1280 × 720 59.94 / 60 720p
480p
480i 720 × 480 59.94 / 60 480i
720 × 480 640 × 480
Vertical scanning frequency
(Hz)
59.94 / 60
59.94 / 60
Information menu display
480p
Audio signal ( PCM)
When digital audio is included in the HDMI connection, the compatible sampling frequencies are 48 kHz/44.1 kHz/ 32 kHz. Refer to “HDMI in” (PT-52LCX66/PT-56LCX66/PT-61LCX66) / “HDMI1 in” or “HDMI2 in” (PT-52LCX16/ PT-56LCX16/PT-61LCX16) on page 41.
About HDMI
HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standards, enhanced and high definition video formats as well as all existing multi-channel audio formats. One jack supports both video and audio information. The HDMI/HDCP* consumer electronic device, such as a set top box or DVD player equipped with a HDMI output connection. By inputting a High-bandwidth Digital Content Protection (HDCP) high definition picture source to the HDMI terminal of this unit, high definition pictures can be displayed on the screen in their digital form. The HDMI input terminal is not intended to be used with personal computers. This unit is compatible with 1080i, 720p, 480p and 480i formats. Select the output of the connected device to match that of the unit.
Notes:
*1 HDMI/HDCP = High Definition Multimedia Interface / High-Bandwidth Digital Copy Protection. *2 EIA/CEA-861/861B Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth
digital content protection.
1
input can be connected to an EIA/CEA 861/861B*2 compliant
21
Installation (continued)
How to connect the PC IN Terminals
Connecting a PC to PC IN
COMPUTER
AUDIO OUT
PC IN Terminal (D-SUB 15P) Pin Layouts
RGB OUT
Conversion adaptor (If necessary)
RGB cable (D-SUB 15P) (Not included)
Connect a cable which matches the audio output terminal on the computer.
PC audio cable (M3 stereo mini pin)
22
45
2
10
15 14 13 12 11
Connection port view
Pin No. Signal name
1
67839
1R 2G 3B 4NC 5NC 6 Ground for R 7 Ground for G 8 Ground for B
Pin No. Signal name
9NC 10 Ground 11 NC 12 NC 13 HD/CSYNC 14 VD 15 NC
NC: Not connected
Notes:
• Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) (Not included) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible D-SUB 15P terminal.
• The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not supplied with this set.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.
• Select the desired PC input position by pressing the TV/VIDEO button. (p. 32)
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
RGB signals that can be input
The table below lists the different types of RGB signals that can be input. If a signal which differs greatly from the types listed below is input, the picture may not be displayed correctly, or a black background may be displayed.
Signal data
Mode type
VGA400 (70 Hz) 640 × 400 31.47 70.08
VGA480 (60 Hz) 640 × 480 31.47 59.94
Macintosh 13˝ 640 × 480 35.00 66.67
VGA480 (75 Hz) 640 × 480 37.50 75.00
SVGA (60 Hz) 800 × 600 37.88 60.32
SVGA (75 Hz) 800 × 600 46.88 75.00
SVGA (85 Hz) 800 × 600 53.67 85.06
Macintosh 16˝ 832 × 624 49.73 74.55
No. of dots
(H × V)
Horizontal frequency
(kHz)
Vertical frequency
(Hz)
Getting Start ed
Personal Computer Signals
* XGA (60 Hz) 1 024 × 768 48.36 60.00
* XGA (70 Hz) 1 024 × 768 56.48 70.07
* XGA (75 Hz) 1 024 × 768 60.02 75.03
* XGA (85 Hz) 1 024 × 768 68.67 85.00
* Macintosh 21˝ 1 152 × 870 68.68 75.06
Notes:
• Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
• The D-SUB 15P connector can accept RGB (H-V sync separate).
• When an external video processor/scaler is used, it must have RGB (H-V sync separate) output.
23

Power ON / OFF

The Power Indicator
LED ACTION
Off Power – OFF
Red (blinking) Power – OFF (Now cooling)
Green Power – ON
Green (blinking) Power – ON (Preparing to light lamp)
Notes:
• If the POWER button is accidentally turned off during use, after power is turned back on, it may take a short period before the lamp automatically comes on.
• After the unit is turned on, maximum picture brightness will be achieved in 5-10 minutes. This is normal.
• This unit consumes approx. 0.4 W in OFF condition when plugged into an AC outlet.
Power ON
Turning the Power ON and OFF
Always be sure to follow the procedure given below to turn the Projection Display power ON and OFF.
• The lamp cooling fan will continue to operate for approximately 1 minute after the power is turned off. During this time, the POWER indicator will blink Red.
Do not disconnect the power cord from the outlet and do not open the circuit breaker (unless necessary) while the cooling fan is still operating. Do not disconnect the power cord from the power outlet while the power indicator blinks Red.
POWER button/ POWER indicator
Press POWER on Projection Display or Remote Control to turn power on.
The Power Indicator blinks Green for about 20 seconds and then turns solid Green.
Power OFF
Press POWER on Projection Display or Remote Control to turn power off.
Power shuts off after a Black Screen is displayed for a few seconds.
Note:
• If the POWER button is pressed during the Black Screen display, Power is turned back on.
The Power Indicator blinks Red for about 1 minute and then LED turns off.
Note:
• When the power cord is disconnected, the internal cooling fan stops op er at ing. In this case, the lamp will be insufficiently cooled and will take a while to turn ON again.
24
Auto shut off
To conserve lamp life, if there is no signal to the set’s tuner for 5 minutes, the lamp will shut off automatically.
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Loading...
+ 56 hidden pages