Panasonic HDC-TM80P-PC, HDC-SD80P-PC, HDC-HS80P-PC User Manual

0 (0)

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

Owner’s Manual

High Definition Video Camera

Model No.HDC-SD80P/PC

HDC-TM80P/PC

HDC-HS80P/PC

Before connecting, operating or adjusting this product, please read the instructions completely.

VQT3J15

Things You Should

Know

Thank you for choosing Panasonic!

You have purchased one of the most

sophisticated and reliable products on

the market today. Used properly, we’re

sure it will bring you and your family

years of enjoyment. Pleas e take time to

fill in the information on the right.

The serial number is on the tag loca te d

on the underside of your camera. Be

sure to retain this manual as your

convenient camera informat ion source.

Safety Precautions

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR

SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS

VASES, SHALL BE PLACED ON THE APPARATUS.

≥ USE ONLY THE RECOMMENDED ACCESSORIES.

≥

DO NOT REMOVE T HE C O VER (OR BAC K); THE R E AR E NO U S ER S ERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN

ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO

PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING,

ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE

VENTILATION VENTS.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

VQT3J15

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

THE FOLLOWING APPLIES ONLY IN CANADA.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B dig i tal

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, a nd can radia te radio fr equenc y energy and, if not inst alled and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installa tion. If this equipment does cause harmful interference to radio or

television recept ion, whic h ca n be determin ed b y tur ning th e eq uipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna.

≥ Increase the separation between the equipment and receiver.

≥ Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

≥ Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the at tached installation

instructions and use only shielded interface cables with ferrite

core when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the us er’s authority to operate this equipment.

Declaration of Conform ity

Trade Name: Panasonic

Model No.: HDC-SD80P/HDC-TM80P/HDC-HS80P

Responsible party: Panasonic Corporation of North Amer ica

One Panasonic Way, Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company

1-800-211-PANA (7262)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This dev ice may not c ause harmf ul interfer ence, and (2) this device mus t

accept any interference received, including interference that may cause undesired

operation.

This Class B digital apparatus complies with Canadian ICES-003.

HDC-TM80PHDC-SD80P HDC-HS80P

VQT3J15

∫ Concerning the battery

∫ Product Identification Marking

AC adaptor

This AC adaptor operates on AC between 110 V and 240 V.

But

≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power

supply only.

≥ When connecting to an AC supply out side of th e U.S .A. or Canada , use a plu g ada ptor to

suit the AC outlet configuration.

≥ When connecting to a supply of greater than AC 125V, ensure the cord you use is suited

to the voltage of the AC supply and the rated current of the AC adaptor.

≥ Contact an electrical parts dis tributor for assistance in selecting a s uitable AC plug

adaptor or AC cord set.

The unit should be install ed near an accessible AC power outlet, with the power cord

connected directly to i t.

To completely disconnect power from the unit, unplug the power cord from the AC power

outlet.

Battery pack (Lithium ion battery pack)

≥ Use the specified unit to recharge the battery pack.

≥ Do not use the battery pack with equipment other than the specified unit.

≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals.

≥ Do not touch the plug terminals (i and j) with metal objects.

≥ Do not disassemble, remodel, heat or throw into fire.

If any electrolyte should come int o con tac t wit h yo ur hands or cl othes, wash i t off th oroughly

with water.

If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes

thoroughly with water, and then consult a doctor.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or

incinerate.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer. Dispose of used batteries according

to the manufacturer’s instructions.

Product Location

High Definition Video Camera Battery holder

AC adaptor Bottom

VQT3J15

This product contains a CR Coin Cell Lithium Batte ry which contains Perchlorate Material –

special handling may apply.

See www.dtsc.ca.gov/hazardous waste/perchlorate

A lithium ion/polymer battery that is recyclable powers the product

you have purchased. Please call 1-800-8-BATTERY for information

on how to recycle this battery.

U.S.A./CANADA CONSUMERS: ATTENTION:

VQT3J15

IMPORTANT SAFETY

INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety

instructions on the unit and the applicable safety instructions listed below. Keep these

operating instructions handy for future reference.

1) Read these instructions.

2) Keep these inst ructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilat i on openings.

Install in accordance with the

manufacturer’s instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding-type

plug has two blades and a third

grounding prong. The wide blade or the

third prong are provided fo r your safety.

If the provided plug does not fit into your

outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being

walked on or pinched particularly at

plugs, convenience recept acles, and the

point where they exit fr om the

apparatus.

11) Only use attachments/a c cessories

specified by the manufacturer.

12) Use only with the

cart, stand, tripod,

bracket, or table

specified by the

manufacturer, or

sold with the

apparatus. When a

cart is used, use caution when moving

the cart/apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14) Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damage d in any

way, s uc h as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus,

the apparatus has been exp osed to rain

or moisture, does not operate normally,

or has been dropped.

VQT3J15

Precautions

USE & LOCATION

≥ TO AVOID SHOCK HAZARD ... Your

camera and power supply shoul d not be

exposed to rain or moisture. Do not

connect the power supply or operate your

camera if it gets wet. Your camera has

been designed for outdoor use, howeve r it

is not designed to sust ain direct exposure

to water, rain, sleet, snow, sand, dust, or a

direct splashing fro m a pool or even a cup

of coffee. This action could permanently

damage the internal parts of your camera.

Do not attempt to disassemble this unit.

There are no user serviceable parts

inside. Unplug your camera from the

power supply before cleaning.

≥ AS WITH ANY SMALL OBJECT, SD

CARDS CAN BE SWALLOWED BY

YOUNG CHILDREN. DO NOT ALLOW

CHILDREN TO HANDLE THE SD CARD.

≥ DO NOT AIM YOUR CAMERA AT THE

SUN OR OTHER BRIGHT OBJECTS

≥ DO NOT EXPOSE YOUR CAMERA TO

EXTENDED HIGH TEMPERATURE ...

Such as, in direct sunlight, inside a closed

car, ne xt to a heater, etc... This action

could permanently damage the i nternal

parts of your camera.

≥ AVOID SUDDEN CHANGES IN

TEMPERATURE ... If the unit is suddenly

moved from a cold place to a warm place,

moisture may form on the SD card and

inside the unit.

≥ DO NOT LEAVE YOUR CAMERA OR

THE POWER SUPPLY TURNED ON

WHEN NOT IN USE.

≥ STORAGE OF YOUR CAMERA ... Store

and handle your camera in a manner tha t

will not subject it to unnecessary

movement (avoid shaking and striking).

Y our camera contains a sensitive pick-up

device which could be damaged by

improper handling or storage.

CARE

≥ TO CLEAN YOUR CAMERA ... Do not

use strong or abrasive detergents when

cleaning your camera body.

≥ TO PROTECT THE LENS ... Do not touch

the surface of the lens with your hand.

Use a commercial camera lens solution

and lens paper when cleaning the lens.

Improper cleaning can scratch the lens

coating.

≥ TO PROTECT THE FINISH OF YOUR

CAMERA ... Before handling your

camera, make sure your hands and face

are free from any chemical prod ucts , su ch

as suntan lotion, as it may damage the

finish.

-If you see this symbol-

WARNING

CAUTION

Information on Dispos a l in other

Countries outside the European

Union

This symbol is only

valid in the European

Union.

If you wish to discard

this product, please

contact your local

authorities or dealer

and ask for the correct

method of disposal.

VQT3J15

∫ About the recording format for

recording motion pictures

Y ou can s elect f rom either AVCHD or iFrame

recording formats to record motion pictures

using this unit. (l 61)

AVCHD:

Y ou can record high defi nition qua lity images

with this format. It is suitab le for viewing on a

large format TV or for saving to disc.

iFrame:

This is a recording format suitable for

viewing and editing with a Mac (iMovie’11).

When using the iMovie’11, you can import

motion pictures in iFrame format quicker

than with AVCHD. You can also make the

file size of the imported motion picture

smaller than when importing AVCHD.

≥ It is not compatible with motion picture

recorded in AVCHD format.

∫ Indemnity about recorded

content

Panasonic does not accept any

responsibility for damages directly or

indirectly due to any type of problems that

result in loss of recording or edited content,

and does not guarantee any cont ent if

recording or editing does not work properly.

Likewise, the above also applies in a case

where any type of repair is made to the unit

(including any other non-built-in memory/

HDD related component).

∫ Handling of built-in memory

[HDC-TM80]

This unit is equipped with the built-in

memory. When using this component, pay

attention to the following points.

Back up data periodically.

The built-in memory is temporary storag e. In

order to avoid erasing dat a due to static

electricity, electromagnetic waves,

breakage, and fa ilures, b ack up the da ta t o a

PC or DVD disc. (l 100, 110 )

≥ Access lamp [ACCESS] (l 18)

illuminates while the SD card or built-in

memory is being accessed (initialization,

recording, playback, de leting etc.). Do not

perform the following ope rati ons whe n th e

lamp illuminates. It may damage the built-

in memory or cause a malfunction in the

unit.

jTurn the unit off (remove the batt e ry )

jInsert and remove the USB cable

jExpose th e un i t to vibrations or sho c k

≥ About disposing of or giving a way this unit .

(l 135)

∫ Handling of HDD [HDC-HS80]

This unit is equipped with the built-in HDD.

While the HDD is capable of storing a large

amount of data, there are a few things to

look out for. When using this component,

pay attention to the following points.

Do not expose the HDD to vibrations and

shocks.

Due to the environment and handling

conditions, the HDD may be subject to

partial damages or may not be able to read,

record, and play back data. Do not expose

the unit to vibrations or shock, and do not

turn off the unit dur ing re cordin g or p layba ck.

If the unit is used in a plac e with loud

sounds, such as a club or similar venue,

the recording may stop due to sound

vibrations. Recording data on an SD card

is recommended in these pl aces.

Back up data periodically.

The HDD is temporary storage. In order to

avoid erasing data due t o static electricity,

electromagnetic waves, breakage, and

failures, back up the data to a PC or DVD

disc. (l 100, 110)

If the HDD experiences any abnormality,

back up data immediately.

Failure in the HDD may produce continuous

noise or choppy sound during recording or

playing back. Continuous use will cause

further deterioration, and may eventually

disable the HDD. If these phenomena are

observed, copy the data on the HDD to a PC,

a DVD disc etc. immediately and contact

consumer support. (

152, 153)

Once the HDD is out of order, data cannot

be restored.

VQT3J15

Operation may stop in hot or cold

environments.

The unit is disabled in order to pr otect the

HDD.

Do not use the unit in low atmospheric

pressures.

The HDD may fail if it is used at altitudes of

3000 m (9800 feet) or higher above sea

level.

Transportation

When the unit is trans porte d, turn of f the unit

and be careful not to shake, drop, or cause

impact to the unit.

Falling detection

[ ] is indicated on the screen when it

detects a falling state (a weightless state). If

the falling state is detected repeatedly, the

unit may stop the recording or playb ac k

operation in order to protect the HDD.

≥ HDD access lamp [ACCESS HDD] (l 19)

illuminates while the HDD is being

accessed (initialization, rec ording,

playback, deleting etc.). Do not perform

the following operations when the lamp

illuminates. It may damage the HDD or

cause a malfunction in the unit.

jTurn the unit off (re m ove the battery )

jInsert and remove the USB cable

jExpose the unit to vibrations or shock

≥ About disposing of or giving awa y this unit.

(l 135)

∫ Cards that you can use with

this unit

SD Memory Card, SDHC Memor y Card

and SDXC Memory Card

≥ 4 GB or more Memory Cards that do not

have the SDHC logo or 48 GB or more

Memory Cards that do not have t he SDXC

logo are not based on SD Memory Card

Specifications.

≥ Refer to page 24 for more details on SD

cards.

∫ For the purposes of this

owner’s manual

≥ SD Memory Card, SDHC Memory Card

and SDXC Memory Card are referred to

as the “SD card”.

≥ Functions that can be used for Motion

Picture Recording Mode:

Functions that can be used for Still Picture

Recording Mode:

≥ Functions that can be used for Motion

Picture Playback Mode:

Functions that can be used for Still Picture

Playback Mode:

≥ Pages for reference are indicated by an

arrow, for example: l 00

This owner’s manual is designed for use

with models ,

and . Pictures may be

slightly different from the original.

≥ The illustrations used in this owner’s

manual show model ,

however, parts of the explanation refer

to different models.

≥ Depending on the model, some

functions are not available.

≥ Features may vary, so please read

carefully.

≥ Not all models may be available

depending on the region of purc hase.

VQT3J15

Accessories.............................................12

Quick Guide....... ... .. ... ................. ... ... .. .....13

Preparation

Parts identificat ion and handling ..... ... ..17

Power supply.. ... ... ................................. ..20

Inserting/removing the battery........... 20

Charging the battery ......................... 21

Charging and reco rdi n g tim e.... ... ...... 22

Recording to a card ................................24

Cards that you can use with

this unit.............. ... ... ... ................. .. ... . 24

Inserting/removing an SD card.......... 25

Turning the unit on/off............................26

Turning the unit on and off with the

power button ..................................... 26

Turning the unit on and off with the

LCD monitor...................................... 26

Selecting a mode ....................................27

How to use the touch screen.................27

About the Touch Menu.. .. ................. . 28

Setting date and time..............................29

Basic

Before recording.....................................30

Selecting a media to record

[HDC-TM80/HDC-HS80] ..........................31

Recording motion pictures ....................32

Recording still pictures..........................34

Recording still pictures in

Motion Picture Recording Mode........ 35

Intelligent Auto Mode .............................36

Motion picture/Still picture playback ....38

Using the menu scre e n ................ ..........41

Using the Setup M enu .... ... .. ...................42

Advanced (Recording)

Zoom in/out function..............................49

Extra Optical Zoom ...... ... ... ............... 49

Image Stabilizer Function...................... 50

Recording with the Touch function.......51

Touch function icons ......................... 51

Recording functions of

operation icons .................... ................... 54

Operation icons................................. 54

Recording functions of menus.............. 60

Manual recording.................................... 72

White balance ................................... 73

Manual shutter speed/

iris adjustment................................... 74

Manual focus adju stme n t.................. 75

Advanced (Playback)

Playback Operatio ns....... ................. ......76

Motion picture playback us ing

operation icon ................. ... ............... 76

Creating still picture from

motion picture ................................... 77

Highlight & Time frame index............ 78

Repeat playba ck .......... ... ... ............... 78

Resuming the previous playback...... 79

Zooming in on a still picture during

playback (Playbac k zoom )................ 79

Various playback function s ........ ... ... .....80

Playing back motion pictures/

still pictures by date .......................... 80

Highlight Playback ............................ 81

Changing the playback settings and

playing back the slide show.............. 83

Deleting scene s/ stil l p ic t ure s ................ 85

Dividing a scene (AVCHD)................ 86

Dividing a scene to partially delete

(iFrame) .... ........................................ 87

Deleting personal information........... 88

Protecting scenes/still pictures ......... 88

DPOF setting.................. ... ... ... ................ 89

Relay scene combining

[HDC-TM80].............................................90

Contents

VQT3J15

PreparationBasicAdvanced

(Recording)

Copy/DubbingWith a PCOthers Advanced

(Playback)

Watching Video/Pictures on your TV....92

Connecting with a HDMI mini

cable ................................................. 95

Connecting with the AV multi

cable ................................................. 95

Playback using VIERALink

™

................96

Copy/Dubbing

Copying between SD card and Built-in

Memory/HDD

[HDC-TM80/HDC-HS80] ..........................98

Connecting a DVD burner to copy to/

play back a disc........................... .........100

Preparing for copying/

playing back .................................... 100

Copying to discs.............................. 102

Playing back the copied disc........... 104

Managing the copie d disc ............... 105

Dubbing with a Blu-ray disc recorder,

video, etc. . ... ..........................................106

With a PC

What you can do with a PC ..................110

End User License Agreement......... 112

Operating environment ........................ 113

Installation ............................................. 116

Connecting to a PC............................... 118

About the PC displa y .... ................ .. 120

Starting HD Writer AE 3.0.. ................ ... 121

Reading the operating instructions

of the software applica tio n s............. 121

If using Mac ...........................................122

Others

Indications............................................. 123

Messages ..............................................126

About recovery................................ 127

Troubleshooting ...................................128

Cautions for use ...................................134

About copyright....................................140

Recording modes/approximate

recordable time .....................................141

Approximate number of recordable

pictures..................................................142

Specifications ....................................... 143

Optional accessories ...........................148

Accessory Order Form

(For USA and Puerto Rico

Customers) ..................................... 150

Limited Warranty (ONL Y FOR U.S.A.

AND PUERTO RICO).............................151

Warranty

(For Canadian Cust o me rs ) .. ... ... ........... 153

Index ...................................................... 154

Spanish Quick Use Guide/

Guía española para el uso rápido ....... 156

VQT3J15

Check the accessories before using this unit.

Keep the accessories out of reach of children to prevent swallowing.

Product numbers correc t as of Dec. 2010. These may be subject to change.

Accessories

Battery pack

VW-VBK180

AC adaptor

VSK0711

AC cable

K2CA2CA00025

AV multi cable

K1HY12YY0008

USB cable

K1HA05AD0007

Stylus pen

VGQ0C14

≥ This is used for operations that are hard to

operate with your fingers or performing

detailed operation s wit h the touch screen

operation. (l 27, 48)

CD-ROM

Software

VQT3J15

∫ Inserting the battery

Install the battery by inserting it in the

direction shown in the figure.

A Insert the battery until it clicks and locks.

∫ Charging the battery

A DC input terminal

1 Connect the AC adaptor to the DC inp ut

terminal.

2 Connect the AC cable to the AC

adaptor, then the AC outlet.

≥ The status indicator will flash red at an

interval of 2 seconds, indicating that

charging has begun.

It will turn off when the charging is

completed.

∫ Inserting/removing an SD card

≥ Check that the access lamp has gone off.

1) Open the SD card cover and insert

(remove) the SD card into (from) the

card slot B.

≥ Face the label side C in the direction

shown in the illustration and press it

straight in as far as it will go.

≥ Press the center of the SD card and then

pull it straight out.

2) Securely close the SD card cover.

≥ Securely close it until it clicks.

Quick Guide









Access lamp [ACCESS] A

≥ When this unit is accessing the SD

card or built-in memory, the access

lamp lights up.







VQT3J15

∫ Turning the unit on/off

Turning the unit on and off with the

power button

Open the LCD monitor and press the power

button to turn on the unit.

A The status indicator lights on.

≥ To turn off the unit, hold down the power

button until the status indicator goes off.

Turning the unit on and off with the LCD

monitor

Opening the LCD monitor turns on the unit.

Closing the LCD monitor turns off the unit.

To turn on the unit

A The status indicator lights on.

To turn off the unit

B The status indicator goes off.

∫ Selecting a mode

Operate the mode switch to change the

mode to , or .

∫ How to use the touch screen

You can operate by directly touching the

LCD monitor (touch screen) with your finger.

It is easier to use the stylus pen (supplied)

for detailed operation or if it is hard to

operate with your fingers.

Touch

T ouch and release t he touch scr een to select

icon or pictur e.

Slide while touching

Move your finger while pr essing on t he touch

screen.





Motion Picture Recording

Mode (l 32)

Still Picture Recording Mode

(l 34)

Playback Mode (l 38, 76)

VQT3J15

Touch Menu

Touch to display the Touch Menu.

Touch (left side)/ (rig ht s ide) of on

the Touch Menu to switch the operation

icons.

A Touch Menu

∫ Language selection

1) Touch [MENU], then touch [SETUP] #

[LANGUAGE].

2) Touch desired language.

∫ Selecting a media to record

[HDC-TM80/HDC-HS80]

1) Change the mode to or .

2) Select the menu.

3) Touch the media to record motion

pictures or still pictures.

≥ Touch [VIDEO/SD C A R D] or [PICTURE/

SD CARD] to record to the SD card.

Touch [VIDEO/Built-inMemory] or

[PICTURE/Built-inMemory] to record to

the built-in memory.

Touch [VIDEO/HDD] or [PICTURE/HDD]

to record to the HDD.

≥ The media is selected separately to

motion pictures or still pictures is

highlighted in yellow .

4) Touch [ENTER].

∫ Recording motion pictures

1) Change the mode to .

2) Open the LCD monitor.

3) Press the recor ding start/stop button to

start recording.

A When you begin recording, ; changes

to ¥.

∫ Recording still pictures

1) Change the mode to .

2) Open the LCD monitor.

3) Press the button fully to take the

picture.

: [MEDIA SELECT]



VQT3J15

∫ Motion picture/Still picture

playback

1) Change the mode to .

2) Touch the play mode select icon A.

Select the [VIDEO/PICTURE] you wish

to play back.

Select the [MEDIA ] and [VIDEO/

PICTURE] you wish to play back.

≥ Touc h [ENTER].

4) Touch the scene or the still pictur e to be

played back.

B is displayed when [AVCHD] is

touched or is displayed when

[iFrame] is touched in step 3.

≥ To display the next (previous) page:

jSlide the thumbnail display upward

(downward) while touching it.

jSwitch the Touch Menu, and then

touch (up) / (down) on the

thumbnail scroll lever.

5) Select the playback operation by

touching the operation icon.

C Operation icon

≥ Operation icons and screen display will

disappear when no function is performed

for a specific period of time. To display

them again, touch the screen.

(Motion picture playback)

1/;: Playback/Pause

6: Rewind playback

5: Fast forward playback

∫: Stops the playback and shows

the thumbnails.

(Still picture pl ayback)

1/;: Slide show (playback of the still

pictures in numerical order) start/

pause.

2;: Plays back the previous picture.

;1: Plays back the next picture.

∫: Stops the playback and shows

the thumbnails.

ALL



ALL





0h01m30s

VQT3J15

1 Speaker

2 USB terminal [ ] (l 101, 106, 118)

3 Intelligent auto/Manual button

[iA/MANUAL] (l 36, 72)

4 Optical image stabilizer button

[ O.I.S.] (l 50)

5 Power button [ ] (l 26)

6 HDMI mini connector [HDMI]

(l 92, 96)

7 AV multi connector (l 92, 109)

≥ Use the AV multi cable (only the supplied

cable).

8 Battery release lever [BATT] (l 20)

9 Lens cover closing switch

The lens cover will o pen automatically when

set to Motion Picture Recording Mode

or Still Picture Recording Mode. (l 27)

When not using the unit, close the lens

cover to protect the lens.

≥ Lens cover does not close automatically.

≥ Slide the Lens cover closing switch to

close the cover.

10 Lens cover

11 LED light

≥ It can be used as a Video light or Photo

light. (l 57, 71)

12 Lens

13 Internal stereo microphones

Preparation

Parts identification and handling

AV MULTI

867

VQT3J15

14 Mode switch (l 27)

15 Status indicator (l 26)

16 Recording start/stop button (l 32)

17 LCD monitor (Touch screen) (l 27)

≥ It can open up to 90o.

≥ It can rotate up to 180o A towards the lens

or 90o B towards the opposite direction.

18 Battery holder (l 20)

19 Tripod receptacle

≥ If you attach a tripod which has 5.5 mm

(0.22 q) screw or larger, it may damage

this unit.

20 SD card cover (l 25)

21 Access lamp [ACCESS] (l 25)

22 Card slot (l 25)

15 16

1817

Due to limitations in LCD production

technology , t here may be some ti ny bright

or dark spots on th e L CD monit or scr een.

However, t his is not a malfunction and

does not affect the recorded picture.



VQT3J15

23 Photoshot button [ ] (l 34)

24 Zoom lever [W/T] (In Motion Picture

Recording Mode or Still Picture

Recording Mode) (l 49)

Thumbnail display switch [ / ]/

Vo lume lever [sVOLr] (In Playback

Mode) (l 39)

25 Grip belt

Adjust the length o f the grip bel t so tha t it fits

your hand.

1 Flip the belt.

2 Adjust the length.

3 Replace the belt.

26 DC input terminal [DC IN] (l 21)

≥ Do not use any other AC adaptors except

the supplied one.

27 HDD access lamp [ACCESS HDD]

28 DC input terminal [DC IN] (l 21)

≥ Do not use any other AC adaptors except

the supplied one.

2423







VQT3J15

∫ About batteries that you can use with this unit

The battery that can be used with this unit is VW-VBK180/VW-VBK360.

≥ The unit has a function for distinguishing batteries which can be used safely. The

dedicated battery (VW-VBK180/VW-VBK360) supports this function. The only

batteries suitable for use with this unit are genuine Panasonic products and

batteries manufactured by other companies and certified by Panasonic. (Batteries

which do not support this function cannot be used). Panasonic cannot in any way

guarantee the quality, performance or safety of batteries which have been

manufactured by other companies and are not genuine Panasonic products.

Inserting/removing the battery

≥ Press the power button to turn off the unit. (l 26)

Install the battery by inserting it in the direction shown in the figure.

Preparation

Power supply

It has been found that counterfeit battery packs which look very similar to the genuine

product are made available to purchase in some markets. Some of these battery packs

are not adequately protected with internal protection to meet the requirements of

appropriate safety standards. There is a possibility that these battery packs may lead

to fire or explosion. Please be advised that we are not liable for any ac cident or failure

occurring as a result of use of a counterfeit battery pack. To ensure that safe products

are used we would recommend that a genuine Panasonic battery pack is used.

Removing the battery

Be sure to hold down the power button until the sta tus

indicator goes off. Then remove the battery while

supporting the unit to prevent it from dropping.

Move the battery release lever in the direction

indicated by the arrow and remove the battery

when unlocked.

ャモヵヵ

A Insert the battery until it

clicks and locks.

VQT3J15

Charging the battery

Important:

≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device.

≥ Do not use the AC cable with any other equipment as it is designed only for this unit.

Also, do not use the AC cable from other equipment with this unit.

≥ The battery can also be charged using a battery charger (VW-BC10PP; optional).

≥ The battery will not be charged if the unit is turned on.

≥ It is recommended to charge the battery in a temperatu re between 10 oC to 30 oC

(50 °F to 86 °F). (The battery temperature should also be the same.)

A DC input terminal

≥ Insert the plugs as far as they will go.

1 Connect the AC adaptor to the DC input terminal.

2 Connect the AC cable to the AC adaptor, then the AC outlet.

≥

The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun.

It will turn off when the charging is completed.

∫ Connecting to the AC outlet

If you turn on the unit while connec ting the AC adaptor , you can use the unit with power

supplied from the outlet.

≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 137.

≥ We recommend using Panasonic batteries (l 12, 22, 23, 148).

≥ If you use other batteries, we cannot guarantee the quality of this product.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in an automobile ex posed to direct sunlight for a long period

of time with doors and windows closed.

When this unit is purchased, the battery is not charged. Charge the battery fully

before using this unit for the first time.





VQT3J15

Charging and recording time

∫ Charging/Recording time

≥ Temperature: 25 oC (77 oF)/humidity: 60%RH (When using AC adaptor)

HDC-SD80

Battery model number

[Voltage/Capacity

(minimum)]

Charging

time

Recording

mode

Maximum

continuous

recordable time

Actual

recordable

time

Supplied ba ttery/

VW-VBK180 (optional)

[3.6 V/1790 mAh]

2h25min

[HA], [HG] 1 h 50 min

55 min

[HX], [HE] 1h55min

[iFrame] 2h 1h

VW-VBK360 (optional)

[3.6 V/3580 mAh]

4h20min

[HA], [HG],

[HX], [HE]

3h45min 1h55min

[iFrame] 3h55min 2h

HDC-TM80

Battery model number

[Voltage/Capacity

(minimum)]

Charging

time

Recording

mode

Maximum

continuous

recordable time

Actual

recordable

time

Supplied ba ttery/

VW-VBK180 (optional)

[3.6 V/1790 mAh]

2h25min

[HA], [HG] 1 h 50 min

55 min

[HX], [HE] 1h55min

[iFrame] 2h 1h

VW-VBK360 (optional)

[3.6 V/3580 mAh]

4h20min

[HA], [HG],

[HX], [HE]

3h45min 1h55min

[iFrame] 3h55min 2h

VQT3J15

≥ These times are approximations.

≥ The indicated charging time is f or when the batter y has been disc harged compl etely.

Charging time and recordable time vary depending on the usage conditions such as

high/low temperature.

≥ The actual recordable time refers to the recorda ble t ime when repeat ed ly st art ing/s toppin g

recording, turning the unit on/off, moving the zoom lever etc.

≥ The batteries heat up after use or charging. This is not a malfunction.

HDC-HS80

Battery model

number

[Voltag e/Cap acity

(minimum)]

Charging

time

Recording

destination

Recording

mode

Maximum

continuous

recordable

time

Actual

recordable

time

Supplied battery/

VW-VBK180

(optional)

[3.6 V/1790 mAh]

2h25min

HDD

[HA], [HG],

[HX], [HE]

1h35min

50 min

[iFrame] 1h45min

[HA], [HG],

[HX], [HE]

1h40min 50min

[iFrame] 1h45min 55min

VW-VBK360

(optional)

[3.6 V/3580 mAh]

4h20min

HDD

[HA], [HG],

[HX], [HE]

3h15min

1h40min

[iFrame] 3h25min

1h45min

[HA], [HG],

[HX], [HE]

3h25min

1h45min

[iFrame] 3h35min

1h50min

Battery capacit y indica tion

≥ The display changes as the battery capacity reduces.

####

If there is less than 3 minutes rema ining, then will become red. If the battery

discharges, then will flash.

≥ The remaining battery capacity is displayed when using the Panasonic battery that you

can use for this unit. The actual time can vary depending on your actual use.

≥ When using the AC adaptor or batteries made by other companies, the remaining

battery capacity will not be shown.

VQT3J15

The unit can record still pictures or motion pictures to an SD card, built-in memory or HDD.

To record to an SD card, read the following.

Cards that you can use with this unit

Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for

motion picture record ing.

* SD Speed Class Rating is the speed

standard regarding continuous writing.

Check via the label on the card, etc.

≥

Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC

Memory Cards that can be used for motion picture recording on the following website.

http://panasonic.jp/support/global/cs/e_cam

(This website is in English only.)

≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB

or more Memory Cards that do not have the SDXC logo are not based

on SD Memory Card Specifications.

≥ When the write-protect switch A on SD card is locked, no recording,

deletion or editing will be possible on th e card.

≥ Keep the Memory Card out of reach of children to prevent swallowing.

Preparation

Recording to a card

This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC

Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC

memory card with other equipment, ch eck the equipment is compatible with these

memory cards.

Card type Capacity Motion picture recording

Still picture

recording

Memory

Card

8MB/16MB/

32 MB

Cannot be used.

Cannot be

guaranteed in

operation.

64 MB/128 MB/

256 MB

Cannot be guaranteed in operation.

512MB/1GB/

2GB

Can be used. Can be used.

SDHC

Memory

Card

4GB/6GB/8GB/

12 GB/16 GB/

24 GB/32 GB

SDXC

Memory

Card

48 GB/64 GB

e.g.:

VQT3J15

Inserting/removing an SD card

Caution:

Check that the access lamp has gone off.

1 Open the SD card cover and

insert (remove) the SD card

into (from) the card slot B.

≥ Face the label side C in the direction

shown in the illustration and press it

straight in as far as it will go.

≥ Press the center of the SD card and then

pull it straight out.

2 Securely close the SD card

cover.

≥ Securely close it until it clicks.

≥ Do not touch the terminals on the back of

the SD card.

≥ Do not apply strong shocks, bend, or drop

the SD card.

≥ Electrical noise, static electricity or the

failure of this unit or the SD card may

damage or erase the dat a st ored on the

SD card.

≥ When the card access lam p is lit, do not:

jRemove the SD card

jTurn the unit off

jInsert and remove the USB cable

jExpose the unit to vibrations or shock

Performing the above while the lamp is on

may result in damage to data/SD card or

this unit.

≥ Do not expose the terminals of the SD

card to water, dirt or dust.

≥ Do not place SD cards in the following

areas:

jIn direct sunlight

jIn very dusty or humid areas

jNear a hea ter

jLocations susceptible to significant

difference in temperat ure (cond ensation

can occur.)

jWhere static electricity or

electromagnetic waves occur

≥ To protect SD cards, return them to their

cases when you are not using th em.

≥ About disposing of or giving away the SD

card. (l 138)

When using an SD card not from Panasonic, or one previously used on other equipment, for

the first time on this unit, format the SD card. (

46, 47) When the SD card is formatted, all

of the recorded data is deleted. Once the data is deleted, it cannot be restored.







Access lamp [ACCESS] A

≥ When this unit is accessing the SD

card or built-in memory, the access

lamp lights up.

VQT3J15

You can turn the unit on and off using the power button or by opening and closing the LCD

monitor.

Turning the unit on and off with the power button

Open the LCD monitor and press the power button to turn on the unit.

A The status indicator lights on.

Turning the unit on and off with the LCD monitor

Unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.

During normal use, opening and closing of the LCD monitor can be conveniently used

to turn the unit on/off.

∫ To turn on the unit

A The status indicator lights on.

∫ To turn off the unit

B The status indicator goes off.

≥ The unit will not turn off while recording motion pictures even if the LCD monitor is closed.

≥ In the following cases, opening t he L CD monit or does not t urn on the un it. P ress t he power

button to turn on the unit.

jWhen the un i t i s originally purchased

jWhen you have turned off the unit using the power button

Preparation

Turning the unit on/off

A clicking sound is heard when the unit is shaken.

≥ This is the sound of the lens moving an d i s not a defect.

This sound will no longer be heard when the unit is turned on and change the mode to

or .

To turn off the unit

Hold down the power button until the

status indicator goes off.





VQT3J15

Change the mode to recording or pl ayback.

Operate the mode switch to change the mode to , or .

You can operate by directly touching the LCD monitor (touch screen) with your finger.

It is easier to use the stylus pen (supplied) for detaile d operati on or if it is hard to oper ate with

your fingers.

∫ Touch

Touch and release the touch screen to s elect icon or

picture.

≥ Touch the center of the icon.

≥ Touc hing the touch screen will not operate while you

are touching another part of the touch screen.

∫ Slide while touching

Move your finger while pressing on the touch screen.

Preparation

Selecting a mode

Motion Picture Recording Mode (l 32)

Still Picture Re co rding Mode (l 34)

Playback Mode (l 38, 76)

Preparation

How to use the touch screen

VQT3J15

∫ About the operation icons

///:

These icons are used to switch the menu and thumbnail

display page, fo r item selection and setting etc.

Touch to return to the previous screen such as when

setting menus.

About the Touch Menu

Touch (left side)/ (right side) of on the Touch Menu to switch the operat ion icons.

Touch (left side)/ (right side) of on the Touch Menu.

≥ It is also possible to swit ch the operation icons by sliding the Touch Menu right or left while

touching it.

B Touch these icons to switch pages upward or downward.

C Displayed only during the Manual Mode.

∫ To display the Touch Menu

A Touch Menu

Recording Mode Playback Mode

The Touch Menu will disappear when n o function is

performed for a specific period of time during

Recording mode. To display it again, touch .



FOCUS

SHTR

IRIS



ALL

VQT3J15

≥ Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.

≥ Perform the touch screen c alibration when the touch is not recognized or wrong location is

recognized. (l 48)

When the unit is turned on for the first time, a message asking you to set the date and time

will appear.

Select [YES] and perform steps 2 to 3 below to set the date and time.

1 Select the menu. (l 41)

Touch the date or time to be set, then set the desired value using / .

A Displaying the World time setting (l 42):

[HOME]/ [DESTINATION]

≥ The year can be set between 2000 and 2039.

≥ The 12-hour system is used to display the time.

3 Touch [ENTER].

≥ A message prompting for World time setting may be

displayed. Perform the World time setting by touching the screen. (l 42)

≥ Touch [EXIT] to complete the setting.

≥ The date and time function is driven by a built-in lithium battery.

≥ When this unit is purchased, the clock is set. If the time display becomes [- -], the built-in

lithium battery needs to be cha rged. To recharge the built-in lithium battery, connect the AC

adaptor or attac h the b at ter y t o this unit . Leav e the uni t as it is fo r ap pro x. 2 4hours and the

battery will maintain the date and time for approx. 4 months. (The battery is still being

recharged even if the unit is off.)

Preparation

Setting date and time

: [SETUP] # [CLOCK SET]

VQT3J15

∫ Basic cam era positi oning

1 Hold the unit with both hands.

2 Put your hand through the grip belt.

3 It is convenient to use the Recording button icon A when holding the unit at waist level.

≥ When recording, make sure your footing is stab le and there is no danger of colliding with

another person or objec t.

≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is

backlit, it will become dark in the recording.

≥ Keep your arms near your body and separate your legs for better balance.

≥ Do not cover the microphones with your hand etc.

∫ Basic motion picture recording

≥ The unit should normally be held steady when recording.

≥ If you move the unit when recording, do so slowly, maintaining a constant speed.

≥ The zoom operation is use ful f or reco rding sub jec ts yo u ca nnot get cl ose to, bu t overu se o f

zoom in and zoom out can make the resulting motion picture less enjoyable to watch.

∫ Recording Yourself

Rotate the LCD monitor towards the lens side.

≥ The image is horizontally flipped as if you see a mirror

image. (However the image recorded is t he same as a

normal recording.)

≥ Only some indications will appear on the screen. When

appears, return the direction of the LCD monitor to

normal position and check the warning/alarm indication.

(l 126)

Basic

Before recording





+ 130 hidden pages