Panasonic HDC-SD20P, HDC-TM20P, HDC-HS20PC, HDC-TM20PC, HDC-HS20P User Manual

...

0 (0)

VQT1Y00

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

High Definition Video Camera

Operating Instructions

Model No.

HDC-SD20P/PC

HDC-TM20P/PC

HDC-HS20P/PC

Before connecting, operating or adjusting this product, please read the instructions completely.

Spanish Quick Use Guide is included.

Guía para rápida consulta en español está incluida.

VQT1Y00

Things You Should Know

Thank you for choosing Panasonic!

You have purchased one of the most sophisticated

and reliable products on the market today. Used

properly, we’re sure it will bring you and your family

years of enjoyment. Please take time to fill in the

information on the right.

The serial number is on the tag located on the back

of your camera. Be sure to retain this manual as

your convenient camera information source.

Safety Precautions

The following mark and symbols are located on bottom of the unit.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND

THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE

APPARATUS.

≥ USE ONLY THE RECOMMENDED ACCESSORIES.

≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN

ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK

OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THA T CURTAINS

AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the

power supply cord shall remain readily operable. To completely disconnect this apparatus from the

AC Mains, disconnect the power supply cord plug from AC receptacle.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

The lightning flash with arrowhead

symbol, within an equilateral

triangle, is intended to alert the user

to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing) instructions

in the literature accompanying the

appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

VQT1Y00

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

THE FOLLOWING APPLIES ONLY IN CANADA.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

≥ Reorient or relocate the receiving antenna.

≥ Increase the separation between the equipment and receiver.

≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

≥ Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: T o assure continued compliance, follow the attached installation instructions

and use only shielded interface cables with ferrite core when connecting to

computer or peripheral devices.

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this

equipment.

Declaration of Conformity

Trade Name: Panasonic

Model No.: HDC-SD20P/HDC-TM20P/HDC-HS20P

Responsible party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company

1-800-211-PANA (7262)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

HDC-SD20P HDC-TM20P HDC-HS20P

VQT1Y00

Batteries

1 Battery pack (Lithium ion battery pack)

≥ Use the specified unit to recharge the battery pack.

≥ Do not use the battery pack with equipment other than the specified unit.

≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals.

≥ Do not touch the plug terminals (i and j) with metal objects.

≥ Do not disassemble, remodel, heat or throw into fire.

2 Button-type battery (Lithium battery)

≥ Insert with poles aligned.

≥ Do not touch the terminals (i and j) with metal objects.

≥ Do not recharge, disassemble, remodel, heat or throw into fire.

≥ Keep out of reach of children

If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with

water.

If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly

with water, and then consult a doctor.

Warning

Risk of fire, explosion and burns. Do not disassemble.

Do not heat the batteries above the following temperatures or incinerate.

Button-type battery 60 oC (140 oF)

Battery pack 60 oC (140 oF)

AC adaptor

This AC adaptor operates on AC between 110 V and 240 V.

But

≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120V AC power supply only .

≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the

AC outlet configuration.

≥ When connecting to a supply of greater than AC 125V, ensure the cord you use is suited to the

voltage of the AC supply and the rated current of the AC adaptor.

≥ Contact an electrical parts distributor for assistance in selecting a suitable AC plug adaptor or AC

cord set.

Product Identification Marking is located on the bottom of units.

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special

handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

A lithium ion/polymer battery that is recyclable powers the product

you have purchased. Please call 1-800-8-BATTERY for information

on how to recycle this battery.

U.S.A./CANADA CONSUMERS: ATTENTION:

VQT1Y00

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the

unit and the applicable safety instructions listed below. Keep these operating instructions handy for

future reference.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding-type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your

safety. If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

11) Only use attachments/accessories specified

by the manufacturer.

12) Use only with the cart,

stand, tripod, bracket, or

table specified by the

manufacturer, or sold

with the apparatus. When

a cart is used, use

caution when moving the

cart/apparatus combination to avoid injury

from tip-over.

13) Unplug this apparatus during lightning

storms or when unused for long periods of

time.

14) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

VQT1Y00

Precautions

USE & LOCATION

≥ TO AVOID SHOCK HAZARD ... Your camera

and power supply should not be exposed to

rain or moisture. Do not connect the power

supply or operate your camera if it gets wet.

Your camera has been designed for outdoor

use, however it is not designed to sustain

direct exposure to water, rain, sleet, snow,

sand, dust, or a direct splashing from a pool or

even a cup of coffee. This action could

permanently damage the internal parts of your

camera. Do not attempt to disassemble this

unit. There are no user serviceable parts

inside. Unplug your camera from the power

supply before cleaning.

≥ AS WITH ANY SMALL OBJECT , SD CARDS

CAN BE SWALLOWED BY YOUNG

CHILDREN. DO NOT ALLOW CHILDREN TO

HANDLE THE SD CARD.

≥ DO NOT AIM YOUR CAMERA AT THE SUN

OR OTHER BRIGHT OBJECTS

≥ DO NOT LEAV E THE CAMERA WITH THE

EVF AIMED DIRECTLY AT THE SUN AS

THIS MAY CAUSE DAMAGE TO THE

INTERNAL PARTS OF THE EVF

≥ DO NOT EXPOSE YOUR CAMERA TO

EXTENDED HIGH TEMPERATURE ... Such

as, in direct sunlight, inside a closed car, next

to a heater, etc... This action could

permanently damage the internal parts of your

camera.

≥ AVOID SUDDEN CHANGES IN

TEMPERATURE ... If the unit is suddenly

moved from a cold place to a warm place,

moisture may form on the SD card and inside

the unit.

≥ DO NOT LEAVE YOUR CAMERA OR THE

POWER SUPPL Y TURNED ON WHEN NOT

IN USE.

≥ STORAGE OF YOUR CAMERA ... Store and

handle your camera in a manner that will not

subject it to unnecessary movement (avoid

shaking and striking). Your camera contains a

sensitive pick-up device which could be

damaged by improper handling or storage.

CARE

≥ TO CLEAN YOUR CAMERA ... Do not use

strong or abrasive detergents when cleaning

your camera body.

≥ TO PROTECT THE LENS ... Do not touch the

surface of the lens with your hand. Use a

commercial camera lens solution and lens

paper when cleaning the lens. Improper

cleaning can scratch the lens coating.

≥ TO PROTECT TH E FINISH OF YOUR

CAMERA ... Before handling your camera,

make sure your hands and face are free from

any chemical products, such as suntan lotion,

as it may damage the finish.

-If you see this symbol-

∫ Indemnity concerning recording

content

The manufacturer shall in no event be liable for

the loss of recordings due to malfunction or

defect of this unit, its accessories or recordable

media.

IMPORTANT

∫ Carefully observe copyright laws

Whatever you have recorded and created can

be used for your personal entertainment only.

Under copyright laws, other materials cannot

be used without obtaining permission from

the holders of the copyrights.

These operating instructions are designed for

use with models , and

. Pictures may be slightly different

from the original.

≥ The illustrations used in these operating

instructions show model ,

WARNING

CAUTION

Information on Disposal in other Countries

outside the European Union

This symbol is only valid in the

European Union.

If you wish to discard this

product, please contact your

local authorities or dealer and

ask for the correct method of

disposal.

VQT1Y00

however, parts of the explanation refer to

different models.

≥ Depending on the model, some functions are

not available.

≥ Features may vary, so please read carefully.

∫ Cards that you can use with this

unit

SD Memory Card and SDHC Memory Card

≥ 4 GB (or more) Memory Cards that do not have

the SDHC logo are not based on SD Memory

Card Specifications.

≥ Refer to page 29 for more details on SD cards.

∫ For the purposes of these

operating instructions

≥ SD Memory Card and SDHC Memory Card are

referred to as the “SD card”.

≥ Functions that can be used for motion picture

recording/motion picture playback are

indicated by in these operating

instructions.

≥ Functions that can be used for still picture

recording/still picture playback are indicated by

in these operating instructions.

≥ “HD Writer AE 1.0 for HDC” is referred to as

the “HD Writer AE 1.0”.

≥ Pages for reference are indicated by an arrow,

for example: l 00

∫ Licenses

≥ SDHC Logo is a trademark.

≥ “A VCHD” and the “AVCHD” Logo are

trademarks of Panasonic Corporation and

Sony Corporation.

≥ Manufactured under license from Dolby

Laboratories.

Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

≥ HDMI, the HDMI Logo and the High-Definition

Multimedia Interface are the registered

trademarks or trademarks of HDMI Licensing

LLC.

≥ VIERA Link™ is a trademark of Panasonic

Corporation.

≥ EZ Sync™ is a trademark of Panasonic

Corporation.

≥ HDA VI Control™ is a trademark of Panasonic

Corporation.

≥ “x.v.Color” is trademark.

≥ LEICA is a registered trademark of Leica

Microsystems IR GmbH and DICOMAR is a

registered trademark of Leica Camera AG.

≥ Microsoft

, Windows

, Windows Vista

and

DirectX

are either registered trademarks or

trademarks of the Microsoft Corporation in the

United States and/or other countries.

≥ Microsoft product screen shot(s) reprinted with

permission from Microsoft Corporation.

≥ IBM and PC/AT are registered trademarks of

International Business Machines Corporation

of the U.S.

≥ Intel

, Core

™

, Pentium

and Celeron

are the

registered trademarks or trademarks of the

Intel Corporation in the United S tat es and other

countries.

≥ AMD Athlon

™

is a trademark of the Advanced

Micro Devices, Inc.

≥ Apple, Mac OS, and iMovie are either

registered trademarks or trademarks of

Apple Inc. in the United States and/or other

countries.

≥ PowerPC is a trademark of International

Business Machines Corporation.

≥ Other names of systems and products

mentioned in these instructions are usually the

registered trademarks or trademarks of the

manufacturers who developed the system or

product concerned.

This product is licensed under the AVC patent

portfolio license for the personal and non-

commercial use of a consumer to (i) encode

video in compliance with the AVC Standard

(“AVC Video”) and/or (ii) decode AVC Video that

was encoded by a consumer engaged in a

personal and non-commercial activity and/or was

obtained from a video provider licensed to

provide AVC Video. No license is granted or shall

be implied for any other use. Additional

information may be obtained from MPEG LA,

LLC. See http://www.mpegla.com

VQT1Y00

Accessories................................................. . 10

Features........................................................ 11

Quick Guide.................................................. 12

Preparation

Before using

[1] Handling of Built-in Memory and HDD

(Hard disk drive) [HDC-TM20/

HDC-HS20] .........................................15

Handling of built-in memory

[HDC-TM20]........................................ 15

Handling of HDD [HDC-HS20]............. 16

[2] Parts identificatio n a nd ha ndling..... 17

[HDC-SD20/HDC-TM20] ..................... 17

[HDC-HS20]......................... ................ 20

Setup

[1] Power supply......................... ............ 23

Charging the battery............................ 23

Inserting/removing the battery............. 24

Charging and recording time............... 25

Connecting to the AC outlet................. 28

[2] Preparation of SD cards.................... 29

Cards that you can use with this unit... 29

Inserting/remov i ng an SD card............ 30

[3] Selecting a mode

(Turning the unit on/off).................... 31

Turning the power on and off with the

LCD monitor........................................ 32

[4] How to use the touch screen............ 33

[5] Using the menu screen..................... 34

Language selection ............................. 35

Menu list.............................................. 35

[6] Setting date and time........................ 39

World time setting (Displaying the

time of the travel destination) .............. 40

[7] Adjusting LCD monitor..... ................ 41

LCD monitor adjustment............. ......... 41

Touch screen calibration...................... 42

Recording Yourself.............................. 42

[8] Using with the remote control.......... 43

Operation of direction buttons/

OK button............................................ 44

Recording

Recording (Basic)

[1] Before recording............................... 45

Intelligent auto mode........................... 46

Quick start........................................... 48

Quick power on ................................... 49

[2] Recording motion pictures.............. 50

Recording modes/approximate

recordable time ................................... 52

PRE-REC............................................ 53

Shooting guide.................................... 53

[3] Recording still pictures .................... 54

Picture qual it y........ .. ............................ 55

Simultaneous recording

(recording still pictures while recording

motion pictures)................................... 56

Number of recordable pictures............ 56

[4] Zoom in /out functio n .......... .. ............ 5 7

Digital zoom fu n ction....... .................... 57

[5] Optical image stabilizer function..... 58

[6] AF tracking ........................................ 59

[7] Recording with the video light......... 60

Recording (Advanced)

[1] Recording functions of operation

icons.................................................... 61

Operation icons................................... 61

[2] Recording functions of menus........ 64

[3] Manual recording.............................. 74

White balance..................................... 75

Manual shutter speed/iris adjustment

.... 76

Manual focus adjustment.................... 77

Picture adju s tment ...... ........................ 77

Contents

VQT1Y00

PreparationRecordingPlaybackBackupWith a PCOthers

Playback

[1] Motion picture playback................... 78

Creating still picture from motion picture

.... 81

Highlight&Time frame index................. 81

Playing back motion pictures by date

.... 82

Intelligent scene selection ................... 82

Highlight playback............................... 83

Repeat playback.................................. 84

Resuming the previous playback......... 84

[2] Still picture playback......................... 85

Playing back still pictures by date........ 87

Editing

[1] Deleting scenes/still pictures ........... 88

[2]

Dividing a scene to par tially delete

... 90

[3] Protecting scenes/still pictures ....... 91

[4] DPOF setting...................................... 92

[5] Copying between SD card and

Built-in Memory/HDD

[HDC-TM20/HDC-HS20]......................93

Confirming remaining capacity on

the copy destinati on............................. 93

Copying ........................... ................. ... 94

[6] Relay scene combining

[HDC-TM20].........................................96

[7] Formatting..................................... ..... 97

With a TV

[1] Watching Video/Pictures on

your TV............................................... 98

Connecting with a HDMI mini cable... 101

Listening in 5.1 channel sound.......... 102

Connecting with the component cable

... 102

[2] Playback using VIERA Link

™

(HDAVI Control

™

)............................. 103

Backup

With other products

[1] Connecting a DVD burner to

copy to/play back a disc ................. 105

Preparing for copying/playing back ... 105

Copying to discs................................ 107

Playing back the copied disc ............. 111

Managing the copied disc

(Formatting, Auto protect, Displaying disc

information)..... ................. ................. . 112

[2] Dubbing images onto other video

devices..............................................113

[3] With a printer (PictBridge).............. 114

With a PC

Before using

[1] What you can do with a PC...... ...... 117

End User License Agreement........... 119

[2] Operating environment................... 120

Setup

[1] Installation....................................... 123

[2] Connecting to a PC......................... 125

About the PC display......................... 127

Using with a PC

[1] Starting HD Writer AE 1.0............... 128

Reading the operating instructions of

the software applications................... 128

[2] If usin g Macintosh ........................... 129

Others

Indications

[1] Indications....................................... 130

[2] Messages......................................... 133

About recovery.................................. 134

Helpful hints

[1] Functions that cannot be used

simultaneous l y ................................ 135

[2] Troubleshooting.............................. 137

Cautions for use........................................ 144

Specifications............................................ 148

Optional accessories................................ 152

Accessory Order Form (For USA and

Puerto Rico Customers) .................... 154

Request for Service Notice

(USA and Puerto Rico Only)..................... 155

Limited Warranty

(United States and Puerto Rico)............... 156

Customer Services Directory

(United States and Puerto Rico)............... 157

Warranty (For Canadian Customers)....... 158

Index........................................................... 159

Spanish Quick Use Guide/Guía española

para el uso rápi do..... ................. ............... 161

VQT1Y00

Accessories

Check the accessories before using this unit.

Battery pack

VW-VBG070

AC adaptor

VSK0697

AC cable

K2CA2CA00025

DC cable

K2GJYDC00004

Remote control

(Built-in battery)

N2QAEC000024

AV cable

K2KYYYY00054

Component cable

K1HY10YY0005

USB cable

K1HY04YY0032

Stylus pen

VFC4394

CD-ROM

VQT1Y00

Features

∫ Very cle ar high definition pictures

This unit can record detailed high definition images.

High definition images (1920k1080)

A Number of available scan lines 1080

* If the recording mode is HA/HG/HX.

Standard images (720k480)

B Number of available scan lines 480

What is AVCHD?

This is a format for recording and playing back highly detailed high definition images.

Images are recorded based on the MPEG-4 AVC/H.264 codec for compressing images and audio is

recorded with the Dolby Digital 5.1 Creator.

≥ Since the recording method is different from an ordinary DVD video etc., the data is not compatible.

∫ Compatibility with other products





With other products Available function Picture quality

Watching Video/

Pictures on your TV

(l 98 to 104)

Playback with the HDMI mini cable

jPlayback using VIERA Link™ (HDAVI

Control™) (l 103)

High definition

images

Playback with the component cable [1080i]

Playback with the component cable [480i] Standard images

Playback with the AV cable

Using a DVD burner

(l 105 to 112)

Connecting a DVD burner to copy to/play back a

disc

jPlaying back the copied disc (l 111)

High definition

images

Standard images

What you can do with a

(l 117 to 118)

Copying data to a PC and easy editing

High definition

images

Writing data to BD/DVD discs and SD cards

Converting the motion picture data to MPEG2 Standard images

Creating a DVD Video disc

Dubbing images onto

Quick Guide

∫ Charging the battery

1 Connect the AC cable to the AC adaptor and

the AC outlet.

2 Insert the battery into the AC adaptor by

aligning the arrows.

∫ Inserting the battery

Install the battery by inserting it in the direction

shown in the figure.

A Insert the battery until it clicks and locks.

∫ Inserting/removing an SD card

1) Open the LCD monitor.

≥ Check that the access lamp has gone off.

2) Open the SD card cover by sliding the OPEN

lever B.

3) Insert/remove the SD card.

≥

Face the label side

in the direction shown in the

illustration and press it straight in as far as it will go.

≥ Press the center of the SD card and then pull it

straight out.

4) Securely close the SD card cover.

≥ Securely close it until it clicks.

∫ How to turn on the power

Turn on the power by changing the mode to

or while pressing the lock release button A.

≥

To turn off the power, change the mode to OFF.

Access lamp [ACCESS] A

≥ When this unit is accessing the SD card or

built-in memory, the access lamp lights up.

Charging lamp

[CHARGE] A

Lights up:

Charging

Goes off:

Charging

completed

OPEN

≥ Operate the mode switch while at the same

time pressing in the lock release button if

changing from OFF to another mode.

≥ Status indicator B

HDC-SD20

HDC-TM20

≥ Rotate the mode dial while at the same

time pressing in the lock release button if

changing from OFF to another mode.

≥ Align with the status indicator B.

OFF

HDC-HS20

VQT1Y00

∫ How to use the touch screen

You can operate by directly touching the LCD

monitor (touch screen) with your finger.

It is easier to use the stylus pen (supplied) for

detailed operation or if it is hard to operate with

your fingers.

Touch and release the touch screen to select

icon or picture.

∫ Language selection

1) Press the MENU button, then touch [SETUP]

# [LANGUAGE].

2) Touch [English].

∫ Recording motion pictures

1) Change the mode to .

2) Open the LCD monitor.

≥ For users who have , proceed to

step 4.

Press the MENU button, then touch

[MEDIA SELECT] # [Built-in Memory] or

[SD CARD].

Press the MENU button, then touch

[MEDIA SELECT] # [HDD] or [SD CARD].

4) Press the recording start/stop button to start

recording.

∫ Recording still pictures

1) Change the mode to .

2) Open the LCD monitor.

≥ For users who have , proceed to

step 4.

Press the MENU button, then touch

[MEDIA SELECT] # [Built-in Memory] or

[SD CARD].

Press the MENU button, then touch

[MEDIA SELECT] # [HDD] or [SD CARD].

4) Press the button fully to take the picture.

VQT1Y00

∫ Motion picture playback

1) Change the mode to .

2) Touch the play mode select icon A to select

desired media to be played back.

≥ Touch [VIDEO/SD CARD ] to play back the SD

card.

Touch [VIDEO/Built-in Memory] to play back

the built-in memory.

Touch [VIDEO/HDD] to play back the HDD.

3) Touch the scene to be played back.

4) Select the playback operation by touching

the operation icon.

1/;: Playback/Pause

6: Rewind playback

5: Fast forward playback

∫: Stops the playback and shows the

thumbnails.

∫ Still picture playback

1) Change the mode to .

2) Touch the play mode select icon A to sele ct

desired media to be played back.

≥ Touch [PICTURE/SD CARD] to play back the

SD card.

T ouch [PICTURE/Built-in Memory] to play back

the built-in memory.

Touch [PICTURE/HDD] to play back the HDD.

3) Touch the still picture to be played back.

4) Select the playback operation by touching

the operation icon.

1/;: Slide show (playback of the still pictures

in numerical order) start/pause.

2;: Plays back the previous picture.

;1: Plays back the next picture.

∫: Stops the playback and shows the

thumbnails.

0h00m00s0h00m00s0h00m00s

VQT1Y00

Preparation

Before using

Handling of Built-in Memory and HDD (Hard

disk drive) [HDC-TM20/HDC-HS20]

This unit is equipped with the built-in 16 GB memory. When using this component, pay attention to the

following points.

This unit is equipped with the built-in 80 GB HDD. While the HDD is capable of storing a large amount

of data, there are a few things to look out for. When using this component, pay att ention to the following

points.

∫ Back up data periodically.

The built-in memory is temporary storage. In order to avoid erasing data due to static electricity,

electromagnetic waves, breakage, and failures, back up the data to a PC or DVD disc. (l 105, 117)

∫ Access lamp [ACCESS] A

≥ The lamp illuminates while the SD card or built-in memory is being accessed (initialization, recording,

playback, deleting etc.).

≥ Do not perform the following operations when the lamp illuminates. It may damage the built-in

memory or cause a malfunction in the unit.

jTurn the unit off

jInsert and remove the USB cable

jExpose the unit to vibrations or shock

≥ About disposing of or giving away this unit. (l 145)

Indemnity about recorded content

Panasonic does not accept any responsibility for damages directly or indirectly due to any type of

problems that result in loss of recording or edited content, and does not guarantee any content if

recording or editing does not work properly. Likewise, the above also applies in a case where any

type of repair is made to the unit (including any other non-built-in memory/HDD related component).

Handling of built-in memory [HDC-TM20]

VQT1Y00

∫ Do not expose the HDD to

vibrations and shocks.

Due to the environment and handling conditions,

the HDD may be subject to partial damages or

may not be able to read, record, and play back

data. Do not expose the unit to vibrations or

shock, and do not turn off the power during

recording or playback.

If the unit is used in a place with loud sounds,

such as a club or similar venue, the recording

may stop due to sound vibrations. Recording

data on an SD card is recommended in these

places.

∫ Back up data periodically.

The HDD is temporary storage. In order to avoid

erasing data due to static electricity,

electromagnetic waves, breakage, and failures,

back up the data to a PC or DVD disc. (l 105,

117)

∫ If the HDD experiences any

abnormality, back up data

immediately.

Failure in the HDD may produce continuous

noise or choppy sound during recording or

playing back. Continuous use will cause further

deterioration, and may eventually disable the

HDD. If these phenomena are observed, copy

the data on the HDD to a PC, a DVD disc etc.

immediately and contact consumer support.

(l 157, 158)

Once the HDD is out of order, data cannot be

restored.

∫ Operation may stop in hot or cold

environments.

The unit is disabled in order to protect the HDD.

∫ Do not use the unit in low

atmospheric pressures.

The HDD may fail if it is used at altitudes of

3000 m (9800 feet) or higher above sea level.

∫ Transportation

When the unit is transported, turn off the power

and be careful not to shake, drop, or cause

impact to the unit.

∫ Falling detection

[ ] is indicated on the screen when it detects a

falling state (a weightless state). If the falling

state is detected repeatedly, the unit may stop

the recording or playback operation in order to

protect the HDD.

∫ HDD access lamp [ACCESS HDD]

≥ The lamp illuminates while the HDD is being

accessed (initialization, recording, playback,

deleting etc.).

≥ Do not perform the following operations when

the lamp illuminates. It may damage the HDD

or cause a malfunction in the unit.

jTurn the unit off

jInsert and remove the USB cable

jExpose the unit to vibrations or shock

≥ About disposing of or giving away this unit.

(l 145)

Handling of HDD [HDC-HS20]

VQT1Y00

Preparation

Before using

Parts identification and

handling

1 LCD monitor (Touch screen) (l 33, 41)

≥ It can open up to 90o.

≥ It can rotate up to 180o A towards the lens or

90o B towards the opposite direction.

2 Manual button [MANUAL] (l 74)

3 Optical image stabilizer button

[ , O.I.S.] (l 58)

4 Light button [LIGHT] (l 60)

5 Speaker

6 Intelligent auto button [iA] (l 46)

7 PRE-REC button [PRE-REC] (l 53)

8 Battery holder (l 24)

9 DC input terminal [DC IN] (l 28)

≥ Always use the supplied AC adaptor or a

genuine Panasonic AC adaptor (VW-AD21PP;

optional).

10 USB terminal [ ] (l 105, 114, 125)

11 Menu button [MENU] (l 34)

12 Delete button [ ] (l 88)

13 SD card open lever [OPEN] (l 30)

14 Audio-video output t e r mi na l [A/V]

(l 98, 113)

≥ Use the AV cable (only the supplied cable).

15 Component terminal [COMPONENT]

(l 98)

16 HDMI mini connector [HDMI] (l 98, 103)

[HDC-SD20/HDC-TM20]

A/V

23456 7

14 15 16

11 12

Due to limitations in LCD production

technology, there may be some tiny bright or

dark spots on the LCD monitor screen.

However, this is not a malfunction and does

not affect the recorded picture.

VQT1Y00

17 Access lamp [ACCESS] (l 15, 30)

18 Card slot (l 30)

19 SD card cover (l 30)

20 Built-in flash (l 71)

21 Lens (LEICA DICOMAR)

22 Lens hood

Rotate the lens hood counter-clockwise A to

remove it. In order to attach it, place into slot B,

and then rotate it clockwise C.

≥ When fitting the tele conversion lens

(VW-T4314H; optional) or the wide conversion

lens (VW-W4307H; optional), first remove the

lens hood.

23 Remote control sensor (l 44)

24 Recording lamp (l 36)

25 Video ligh t ( l 60)

26 Recording start/stop button (l 50)

27 Status indicator (l 31)

28 Mode switch (l 31)

29 Photoshot button [ ] (l 54)

30 Zoom lever [W/T] (In recording mode)

(l 57)

Thumbnail display switch/Volume lever

[s /VOLr] (In playback mode) (l 79)

31 Internal microphones (5.1 channel

support)

Lens cover A

≥The lens cover opens in

recording mode.

(l 31)

20 21

2425

30 31

3233

VQT1Y00

32 Grip belt

Adjust the length of the grip belt so that it fit s your

hand.

1 Flip the belt.

2 Adjust the length.

3 Replace the belt.

33 Shoulder strap fix ture

34 Battery release lever [BATT] (l 24)

35 Tripod receptacle

This is a hole for attaching the unit to the optional

tripod. (For details on mounting the tripod, refer

to the operating instructions for the tripod.)

A Camera base

Be sure that the grip belt stays clear of the video

light B when the tripod is used as shown below.

34 35



VQT1Y00

1 LCD monitor (Touch screen) (l 33, 41)

≥ It can open up to 90o.

≥ It can rotate up to 180o A towards the lens or

90o B towards the opposite direction.

2 Manual button [MANUAL] (l 74)

3 Optical image stabilizer button

[ , O.I.S.] (l 58)

4 Light button [LIGHT] (l 60)

5 Speaker

6 Intelligent auto button [iA] (l 46)

7 PRE-REC button [PRE-REC] (l 53)

8 Battery holder (l 24)

9 DC input terminal [DC IN] (l 28)

≥ Always use the supplied AC adaptor or a

genuine Panasonic AC adaptor (VW-AD21PP;

optional).

10 USB terminal [ ] (l 105, 114, 125)

11 Menu button [MENU] (l 34)

12 Delete button [ ] (l 88)

13 SD card open lever [OPEN] (l 30)

14 Audio-video output t e r mi na l [A/V]

(l 98, 113)

≥ Use the AV cable (only the supplied cable).

15 Component terminal [COMPONENT]

(l 98)

16 HDMI mini connector [HDMI] (l 98, 103)

17 Access lamp [ACCESS] (l 30)

18 Card slot (l 30)

19 SD card cover (l 30)

[HDC-HS20]

A/V

1 234567

11 12

14 15 16

Due to limitations in LCD production

technology, there may be some tiny bright or

dark spots on the LCD monitor screen.

However, this is not a malfunction and does

not affect the recorded picture.

VQT1Y00

20 Built-in flash (l 71)

21 Lens (LEICA DICOMAR)

22 Lens hood

Rotate the lens hood counter-clockwise A to

remove it. In order to attach it, place into slot B,

and then rotate it clockwise C.

≥ When fitting the tele conversion lens

(VW-T4314H; optional) or the wide conversion

lens (VW-W4307H; optional), first remove the

lens hood.

23 Remote control sensor (l 44)

24 Recording lamp (l 36)

25 Video ligh t ( l 60)

26 Recording start/stop button (l 50)

27 Status indicator (l 31)

28 Mode dial (l 31)

29 HDD access lamp [ACCESS HDD] (l 16)

30 Photoshot button [ ] (l 54)

31 Zoom lever [W/T] (In recording mode)

(l 57)

Thumbnail display switch/Volume lever

[s /VOLr] (In playback mode) (l 79)

32 Internal microphones (5.1 channel

support)

Lens cover A

≥The lens cover opens in

recording mode.

(l 31)

20 21

2425

31 32

3334

VQT1Y00

33 Grip belt

Adjust the length of the grip belt so that it fit s your

hand.

1 Flip the belt.

2 Adjust the length.

3 Replace the belt.

34 Shoulder strap fix ture

35 Battery release lever [BATT] (l 24)

36 Tripod receptacle

This is a hole for attaching the unit to the optional

tripod. (For details on mounting the tripod, refer

to the operating instructions for the tripod.)

A Camera base

Be sure that the grip belt stays clear of the video

light B when the tripod is used as shown below.

35 36



VQT1Y00

Preparation

Setup

Power supply

∫ About batteries that you can use with this unit

The battery that can be used with this unit is VW-VBG070/VW-VBG130/VW-VBG260/VW -VBG 6.

≥ This unit has a function to distinguish the batteries that can be used, and the batteries

(VW-VBG070/VW-VBG130/VW-VBG260/VW-VBG6) are compatible with this function. (The

batteries that are not compatible to this function cannot be used.)

≥ To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.

Important:

If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC

cable from the AC adaptor.

1 Connect the AC cable to the AC adaptor and the AC outlet.

2 Insert the battery into the AC adaptor by aligning the arrows.

It has been found that counterfeit battery packs which look very similar to the genuine

product are made available to purchase in some markets. Some of these battery packs are

not adequately protected with internal protection to meet the requirements of appropriate

safety standards. There is a possibility that these battery packs may lead to fire or explosion.

Please be advised that we are not liable for any accident or failure occurring as a result of use

of a counterfeit battery pack. To ensure that safe products are used we would recommend

that a genuine Panasonic battery pack is used.

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery before using this

unit.

Charging lamp [CHARGE] A

Lights up:

Charging (Battery charging time: l 25)

Goes off:

Charging completed

Flashing:

Make sure that the terminals of the battery or the

AC adaptor are not exposed to dirt, foreign

objects or dust, then reconnect them properly.

(l 146)

VQT1Y00

≥ We recommend using Panasonic batteries (l 10, 25, 26, 152).

≥ If you use other batteries, we cannot guarantee the quality of this product.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with

doors and windows closed.

Install the battery by inserting it in the direction shown in the figure.

Inserting/removing the battery

Removing the battery

Make sure that the power is off and that the

status indicator is turned off, and then

remove by holding onto it taking care not to

drop.

Move the BATTERY lever in the direction

indicated by the arrow and remove the

battery when unlocked.

BATT

A Insert the battery until it clicks and locks.

CAUTION

Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type recommended by the

manufacturer. Dispose of used batteries

according to the manufacturer’s instructions.

VQT1Y00

∫ Charging/Recording time

≥ Temperature: 25 oC (77 oF)/humidity: 60%

Charging and recording time

HDC-SD20

Battery model number

[Voltage/Capacity

(minimum)]

Charging time

Maximum continuously

recordable time

Actual recordable

time

Supplied battery/

VW-VBG070 (optional)

[7.2 V/725 mAh]

1h35min 1h15min 45min

VW-VBG130 (optional)

[7.2 V/1250 mAh]

2h35min 2h10min 1h20min

VW-VBG260 (optional)

[7.2 V/2500 mAh]

4h40min 4h10min 2h35min

VW-VBG6 (optional)

[7.2 V/5400 mAh]

9h25min 10h20min 6h20min

HDC-TM20

Battery model number

[Voltage/Capacity

(minimum)]

Charging time

Maximum continuously

recordable time

Actual recordable

time

Supplied battery/

VW-VBG070 (optional)

[7.2 V/725 mAh]

1h35min 1h15min 45min

VW-VBG130 (optional)

[7.2 V/1250 mAh]

2h35min 2h10min 1h20min

VW-VBG260 (optional)

[7.2 V/2500 mAh]

4h40min 4h5min 2h30min

VW-VBG6 (optional)

[7.2 V/5400 mAh]

9h25min 10h10min 6h15min

VQT1Y00

* The battery pack holder kit VW-VH04 (optional) is necessary.

≥ These times are approximations.

≥ The indicated charging time is for when the battery has been discharged completely. Charging

time and recordable time vary depending on the usage conditions such as high/low

temperature.

≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping recording,

turning the unit on/off, moving the zoom lever etc.

≥ The batteries heat up after use or charging. This is not a malfunction.

HDC-HS20

Battery model

number

[Voltage/Capacity

(minimum)]

Charging

time

Recording

destination

Recording

mode

Maximum

continuously

recordable time

Actual

recordable

time

Supplied battery/

VW-VBG070

(optional)

[7.2 V/725 mAh]

1h35min

HDD

HA/HG/HX/

1h10min 40min

HA/HG/HX/

1h15min 45min

VW-VBG130

(optional)

[7.2 V/1250 mAh]

2h35min

HDD

HA/HG/HX 1 h 55 min 1 h 10 min

HE 2h 1h10min

HA/HG/HX/

2h5min 1h15min

VW-VBG260

(optional)

[7.2 V/2500 mAh]

4h40min

HDD

HA/HG/HX 3 h 40 min 2 h 15 min

HE 3h45min 2h20min

HA/HG/HX/

4h 2h25min

VW-VBG6

(optional)

[7.2 V/5400 mAh]

9h25min

HDD

HA/HG/HX 9 h 10 min 5 h 40 min

HE 9h25min 5h50min

HA/HG/HX/

9h55min 6h5min

VQT1Y00

Battery capacity indication

≥ The display changes as the battery capacity reduces. ####

If there is less than 3 minutes remaining, then will become red. If the battery discharges,

then ( ) will flash.

≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for

this unit. It may take time to display the remaining battery capacity. The actual time can vary

depending on your actual use.

≥ The maximum amount of remaining battery capacity able to be indicated is 9 hours 59 minutes. If

the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green and will not

change until the remaining time falls below 9 hours 59 minutes.

≥ When changing modes, the time indication will turn off momentarily in order to recalculate the

remaining battery capacity time.

≥ When using the AC adaptor or batteries made by other companies, the remaining battery capacity

will not be shown.

VQT1Y00

Important:

While the DC cable is connected to the AC adaptor, the battery will not charge.

≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do

not use the AC cable from other equipment with this unit.

A DC output terminal

B DC input terminal

Insert the DC cable matching the [ ] mar k of the DC input terminal.

1 Connect the AC cable to the AC adaptor and the AC outlet.

2 Connect the DC cable to the AC adaptor.

3 Connect the DC cable to the DC input terminal [DC IN].

≥ Make sure to set the mode to OFF and the status indicator is turned off when disconnecting the AC

adaptor.

Connecting to the AC outlet



DC IN



VQT1Y00

Preparation

Setup

Preparation of SD cards

Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture

recording.

* The SD Speed Class Rating is the speed standard for successive writes.

≥ 4 GB or more Memory Cards that do not have

the SDHC logo are not based on SD Memory

Card Specifications.

≥ When the write-protect

switch A on SD card is

locked, no recording,

deletion or editing will be

possible on the card.

≥ Keep the Memory Card out of reach of children

to prevent swallowing.

This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC

Memory Cards. When using an SDHC Memory Card on another device, confirm that the device

supports the SDHC Memory Card.

Cards that you can use with this unit

Card type Capacity

Motion picture recording

The following models of Panasonic SD cards can

be used.

Still pictur e

recording

SD Memory

Card

8MB

16 MB

Cannot be used. Can be

used.

32 MB

64 MB

128 MB

256 MB

512 MB

Cannot be guaranteed in operation.

The recording may suddenly stop during motion

picture recording depending on the SD card you

use. (l 138)

1 GB RP-SDV01G

2 GB RP-SDV02G, RP-SDM02G

SDHC

Memory

Card

4 GB RP-SDV04G, RP-SDM04G

6 GB RP-SDM06G

8 GB RP-SDV08G

12 GB RP-SDM12G

16 GB RP-SDV16G

32 GB RP-SDV32G

VQT1Y00

Caution:

When the SD card is removed while the access lamp is lit, this unit may malfunction or the data

recorded on the SD card may be lost.

1 Open the LCD monitor.

≥ Check that the access lamp has gone off.

2 Open the SD card cover by

sliding the OPEN lever B.

3 Insert/remove the SD card.

≥ Face the label side C in the direction shown in

the illustration and press it straight in as far as

it will go.

≥ Press the center of the SD card and then pull it

straight out.

4 Securely close the SD card cover.

≥ Securely close it until it clicks.

≥ Do not touch the terminals on the back of the SD card.

≥ Do not apply strong shocks, bend, or drop the SD card.

≥ Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the

data stored on the SD card.

≥ When the card access lamp is lit, do not:

jRemove the SD card

jTurn the unit off

jInsert and remove the USB cable

jExpose the unit to vibrations or shock

Performing the above while the lamp is on may result in damage to data/SD card or this unit.

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first

time on this unit, format the SD card. (l 97) When the SD card is formatted, all of the recorded data

is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc

etc. before proceeding with the formatting. (l 105, 117)

OPEN

Access lamp [ACCESS] A

≥ When this unit is accessing the SD card or

built-in memory, the access lamp lights up.

+ 134 hidden pages