Panasonic FX-301 User Manual

0 (0)

FX-301 SERIES

Digital Fiber Sensor

Superior performance and advanced user-friendly multi-functionality enables expert usage on the very first day

* Passed the UL 991 Environment Test

http://www.fiber-sensor.com

* UL 61010C-1 compatible, Passed the UL 991 Environment Test based on SEMI S2-0200. [Category applicable for semiconductor manufacturing: TWW2, Process Equipment] [Applicable standards: UL 61010C-1]

[Additional test / evaluation standards as per intended use: UL 991, SEMI S2-0200]

Long-range sensing made possible with built-in optical lens

For the first time in the industry, an optical ‘double coupling lens’ has been incorporated directly into the fiber sensor itself. This lens maximizes the light emission efficiency, resulting in a tremendous improvement in the sensing range. Sensing ranges with small diameter fibers and ultra-small diameter fibers, which have become very popular in recent years due to the miniaturization of chip components, have been increased by 50 % over previous values achieved with other amplifiers.

Stable long-term sensing

The newly developed four-chemical emitting element that uses the FX-301 (red LED type) suppresses changes over long periods of time as much as possible, so that a stable light emitting level is maintained. There is very little element deterioration so that stable and accurate sensing can be maintained over long periods.

Selectable response time

We offer 4 selectable levels to correspond with various applications: the response time 150 !s FAST mode, the LONG mode, perfect for adverse environments, and the S-D mode, especially made for minute detection.

Enhanced worksite-friendly installability

Our new fiber cutter utilizes a specially developed two-in-one fiber attachment that now makes it possible to cut two fibers simultaneously to exactly the same length. Also, since the fibers can be attached to the amplifier while being fixed in position in the two-in-one fiber attachment, sensitivity changes due to variation in the amount of fiber insertion do not occur.

68

08/2005

 

Easy maintenance, as main and sub units are identical

Both main and sub units utilize the same amplifier body. This feature allows for easy mounting in the side-by-side configuration. The main and sub unit functions are distinguished only by the proper use of 3-core main cable and the 1-core sub cable. Moreover, by utilizing the same body for both main and sub units, inventor y management and maintenance is simplified.

Wiringand labor-saving design allows side- by-side configuration for up to sixteen units

Up to sixteen amplifiers can be connected in a side-by-side configuration. As the sub cable contains only one output line, a great amount of wiring and space can be saved. Also, special ‘sliding’ connectors have been provided for all main and sub cables, which can be detached merely by releasing the lock and pulling directly back, without having to slide the amplifier body to the side. Using this connector system, only a minimal amount of space is required for regular maintenance.

FX-301

Environmentally friendly packaging

With regard to effects on the environment, we only utilize the simplest of packaging methods greatly contributing to the reduction in wastes generated by your worksite.

Also, the bags are made of polyethylene, a substance that doesn’t give off polluting gases when burned.

Polyethylene packaging

Even beginners can quickly learn how to use the MODE NAVI

MODE NAVI uses six indicators to display the amplifier’s basic operations. The current operating mode can be confirmed at a glance, so even a first time user can easily operate the amplifier without becoming confused.

The use of only two switches makes for very simple operations

Only two switches, the large jog switch and the large MODE key, are required for operation. Depressing the large MODE key sets the ‘mode selection’ and ‘mode cancel’ functions. The large jog switch is used to select from the detailed functions available within each mode, as well as to change numerical values after the mode has been chosen.

08/2005

69

 

FX-301

4 types of light sources available

In addition to our red LED (four-chemical emitting element) type, the blue, green, and infrared LED types are also provided to correspond to your specific application.

Optical communication function lets multiple sensors be adjusted all at once

The optical communication function allows the data that is currently set to be copied and saved all at once for all amplifiers connected together from the right side. This greatly reduces troublesome setup tasks and makes setup much smoother.

Equipped with each type of timer

These sensors are equipped with 3 types of timers, ON-delay, OFF-delay, and ONE SHOT, for compatibility to variegated environments.

ON-delay timer

This function is useful for sensing only objects taking a long time travel.

OFF-delay timer

This function is useful when the connected device has a slow response time.

ONE SHOT timer

This function is useful when the input specifications of the connected device require a signal of fixed width.

Easy code input setting

Every function can be directly set merely by the input of a four digit code (numbers) from the code table. This convenient feature is easy to set up.

In the event that settings are accidentally changed at the operating site, merely entering the correct code can restore the original settings. This results in easy and quick maintenance.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Invertible digital display

 

 

Selectable cable length

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The digital display can be inverted as per its orientation once mounted onto the amplifier.

 

 

Made available are 3 lengths, 1 m 3.281 ft,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 m 6.562 ft, and 5 m 16.404 ft, to suit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

your application requirements. This helps

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

reduce the waste caused by cutting cables

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and lightens the installation workload.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

70

08/2005

 

FX-301

Optional units for greater freedom and control when installing

Sensor-PLC connection system

SC SERIES Bank selection unit

FX-CH SERIES

This wire-saving system enables the collective connection of up to 16 I/O devices with an MIL connector. Scattered installation is also possible with the help of a sensor separate unit.

Without directly manipulating the sensor itself, you can simultaneously switch up to 16 fiber sensors’ settings using an external emitted signal. (Load and save)

mAlso possible with the FX-301 series’ databank function

APPLICATIONS

Workpieces detection

This standard type of FX-301 using red light has a four-chemical emitting element for stable sensing over long periods.

Sensing film meandering

Infrared LED type is ideal for sensing environments with light restrictions, such as places where light-sensitive film is being handled. (The emission peak wavelength: 940 nm 0.037 mil.) It includes full-auto teaching function which allows sensitivity to be set without stopping the workpiece line.

Sensing semi-transparent stickers

The blue LED type greatly reduces the dampening rate, making it ideal for delicate sensing.

Detecting chip component

Because of low light intensity fluctuations when detecting minute moving objects, decrease the hysteresis in PRO mode and accurate sensing will be possible in highspeed mode. This method is optimal for chip component verification in taping equipment.

Sensing register marks

The green LED type can accurately discriminate between red and yellow, that cannot be easily detected using red LED type.

Detecting register marks on a transparent sheet

When detecting registration marks on transparent film with a thru-beam type, the S-D (reduced light intensity) mode will enable minute light intensity fluctuation sensing.

08/2005

71

 

FX-301

ORDER GUIDE

Amplifiers

Quick-connection cable is not supplied with the amplifier. Please order it separately.

 

 

 

 

 

 

 

 

Type

 

Appearance

Model No.

Emitting element

Output

 

 

 

 

 

 

 

 

 

 

output

 

 

FX-301

Red LED

 

 

 

 

 

 

 

 

 

 

 

 

FX-301B

Blue LED

NPN open-collector

 

 

 

 

 

NPN

 

 

FX-301G

Green LED

transistor

 

 

 

 

 

 

 

 

 

 

 

Digital

 

 

 

 

 

 

 

 

 

 

FX-301P

Red LED

 

 

 

 

 

 

FX-301H

Infrared LED

 

 

 

output

 

 

 

 

 

 

 

 

 

FX-301BP

Blue LED

PNP open-collector

 

 

 

 

 

PNP

 

 

FX-301GP

Green LED

transistor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FX-301HP

Infrared LED

 

 

 

 

 

 

 

 

 

 

Quick-connection cables Quick-connection cable is not supplied with the amplifier. Please order it separately.

Type

Model No.

 

 

 

Description

 

 

 

 

 

 

 

CN-73-C1

Length: 1 m

3.281 ft

 

 

 

 

 

 

0.15 mm2

3-core cabtyre cable, with connector on one end

Main cable

CN-73-C2

Length: 2 m

6.562 ft

Cable outer diameter: "3.0 mm "0.118 in

 

 

 

 

 

CN-73-C5

Length: 5 m 16.404 ft

 

 

 

CN-71-C1

Length: 1 m

3.281 ft

 

 

 

 

 

 

0.15 mm2

1-core cabtyre cable, with connector on one end

Sub cable

CN-71-C2

Length: 2 m

6.562 ft

Cable outer diameter: "3.0 mm "0.118 in

 

 

 

 

 

CN-71-C5

Length: 5 m 16.404 ft

 

 

 

 

 

 

 

 

Main cable

CN-73-C

End plates End plates are not supplied with the amplifier. Please order separately when the amplifiers are mounted in cascade.

Appearance

Model No.

Description

When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates ensure that all

MS-DIN-E amplifiers are mounted together in a secure and fully connected manner.

Two pcs. per set

OPTIONS

Designation

Model No.

Description

 

 

 

 

Amplifier mounting

MS-DIN-2

Mounting bracket for amplifier

bracket

 

 

 

 

 

10 sets of 2 communication window seals and 1 connector seal

 

 

Communication window seal:

Fiber amplifier

FX-MB1

It prevents malfunction due to transmission signal from another

amplifier, as well as, prevents effect on another amplifier.

protective seal

 

Connector seal:

 

 

 

 

It prevents contact of any metal, etc., with the pins of the quick-

 

 

connection cable.

 

 

 

 

Amplifier mounting bracket

MS-DIN-2

Fiber amplifier protective seal

FX-MB1

72

08/2005

 

FX-301

LIST OF FIBERS

Standard fibers [Thru-beam type (one pair set)]

 

Shape of fiber head

Sensing range (mm in ) (Note 1)

 

:LONG

 

:FAST

Min. sensing object

Fiber cable

Allowable

 

 

 

 

 

Type

 

:STD

 

:S-D

under the optimum

length

bending

Model No.

 

 

 

 

(mm in)

Red LED

Blue LED Green LED Infrared LED

 

condition (Note 2)

 

:Free-cut

radius

 

 

 

 

 

 

With lens

19,500 767,715

5,400 212.598

2,800

 

2.400

94.488

"0.4 mm

 

 

 

 

 

14,000 551.180

2,700 106.299

 

110.236

1,200 47.244

 

 

FT-FM10L

 

 

 

"0.016 in

10 m

 

 

 

10,000 393.700

1,900 74.803

1,400 55.118

900

35.433

 

 

 

opaque object

32.808 ft

 

 

 

 

3,800 149.606

 

1,000 39.370

(Note 3)

 

 

range

With lens

1,600 62.992

400

15.748

 

 

155

6.102

"0.02 mm

 

 

 

 

 

 

 

 

 

800 31.496

200

7.874

200

7.874

77

3.031

 

 

FT-SFM2L

 

"0.0008 in

2 m

 

sensing

 

580 22.835

130

5.118

100

3.937

55

2.165

opaque object

6.562 ft

 

 

 

280 11.024

 

 

65

2.559

 

 

R25 mm

 

Lens mountable

1,100 43.307

220

8.661

 

 

100

3.937

"0.04 mm

 

R0.984 in

 

 

530 20.866

110

4.331

110

4.331

50

1.969

 

 

FT-B8

 

"0.0016 in

2 m

 

Long

 

400 15.748

75

2.953

55

2.165

30

1.181

 

 

opaque object

6.562 ft

 

 

 

180 7.087

 

 

40

1.575

 

 

 

 

 

 

1,000 39.370

200

7.874

 

 

90

3.543

"0.03 mm

 

 

 

 

 

 

 

 

 

 

 

 

480 18.898

100

3.937

100

3.937

45

1.772

 

 

FT-NB8

 

 

"0.0012 in

2 m 6.562 ft

 

 

 

360 14.173

70

2.756

50

1.969

28

1.102

 

 

 

opaque object

(Note 4)

 

 

 

 

168 6.614

 

 

35

1.378

 

 

 

 

 

 

 

 

 

 

 

 

 

Lens mountable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

 

 

FT-FM2

 

 

 

 

 

 

 

 

 

 

 

R0.984 in

 

 

Sleeve 90 mm 3.543 in

 

 

 

 

 

 

 

 

 

Fiber

 

 

 

 

 

 

 

 

 

 

 

 

FT-FM2S

 

 

 

 

 

 

 

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

 

R0.984 in

 

 

Sleeve 40 mm 1.575 in

780 30.709

150

5.906

 

 

50

1.969

"0.03 mm

 

Sleeve

 

 

 

 

 

R10 mm

 

 

 

400 15.748

75

2.953

70

2.756

25

0.984

 

FT-FM2S4

 

 

"0.0012 in

2 m

 

 

280 11.024

40

1.575

35

1.378

18

0.709

R0.394 in

 

 

opaque object

6.562 ft

 

 

 

130 5.118

 

 

24

0.945

 

 

 

 

 

Lens mountable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FT-T80

 

 

 

 

 

 

 

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

 

 

R0.984 in

 

Standard

 

 

 

 

 

 

 

 

 

 

 

FT-SFM2

 

126 4.961

140

 

22

0.866

45

opaque object

(Note 4)

 

 

 

 

700 27.559

5.512

 

 

1.772

"0.03 mm

 

R25 mm

 

 

 

360 14.173

70

2.756

66

2.598

22

0.866

"0.0012 in

2 m 6.562 ft

FT-N8

 

 

250 9.843

40

1.575

33

1.299

17

0.669

 

 

R0.984 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R25 mm

FT-NFM2

 

 

 

 

 

 

 

 

 

 

 

R0.984 in

 

 

Sleeve 90 mm 3.543 in

 

 

 

 

 

 

 

 

 

Fiber

 

 

 

 

 

 

 

 

 

 

 

 

FT-NFM2S

 

 

270 10.630

50

1.969

 

 

16

0.630

"0.025 mm

 

R25 mm

 

 

 

 

 

R0.984 in

 

 

 

140 5.512

25

0.984

24

0.945

8

0.315

 

 

 

 

"0.0010 in

2 m

Sleeve

 

 

Sleeve 40 mm 1.575 in

100 3.937

16

0.630

12

0.472

5

0.197

 

 

 

6.562 ft

R10 mm

 

 

 

49 1.929

 

 

8

0.315

 

opaque object

FT-NFM2S4

 

 

 

 

 

 

 

 

 

 

 

R0.394 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R25 mm

FT-SNFM2

 

 

 

 

 

 

 

 

 

 

 

R0.984 in

 

Elbow

Lens mountable

530 20.866

85

3.346

 

 

32

1.260

"0.04 mm

 

 

 

 

230 9.055

42

1.654

44

1.732

16

0.630

 

R25 mm

FT-R80

 

"0.0016 in

2 m

 

 

150 5.906

28

1.102

22

0.866

12

0.472

opaque object

6.562 ft

R0.984 in

 

 

 

80 3.150

 

 

16

0.630

 

 

 

 

 

 

2,000 78.740

400

15.748

 

 

150

5.906

"0.05 mm

 

 

 

 

 

 

 

 

 

 

 

 

1,000 39.370

200

7.874

200

7.874

75

2.953

 

 

FT-V10

 

 

"0.0019 in

 

 

 

 

800 31.496

130

5.118

100

3.937

40

1.575

 

 

 

 

opaque object

 

 

 

 

 

350 13.780

 

 

65

2.559

 

 

 

 

 

 

 

 

 

 

2 m

 

 

 

 

400 15.748

80

3.150

 

 

30

1.181

 

 

 

 

 

 

 

 

6.562 ft

 

 

 

 

200 7.874

40

1.575

40

1.575

15

0.591

 

 

FT-SFM2SV2

view-Side

 

 

 

 

 

180 7.087

25

0.984

26

1.024

22

0.866

 

1 m

 

 

 

140 5.512

28

1.102

20

0.787

12

0.472

 

 

 

 

 

Sleeve part cannot be bent.

70 2.756

 

 

14

0.551

 

 

 

 

R25 mm

 

 

 

390 15.354

 

 

 

 

 

 

 

 

 

 

 

50

1.969

 

44

1.732

"0.02 mm

 

R0.984 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FT-V22

 

 

125 4.921

16

0.630

13

0.512

15

0.591

"0.0008 in

3.281 ft

 

 

Sleeve part cannot be bent.

opaque object

 

 

 

63 2.480

 

 

8

0.315

 

 

 

 

 

 

 

 

175 6.890

28

1.102

 

 

10

0.394

 

 

 

 

 

 

 

 

 

 

 

 

 

 

80 3.150

14

0.551

14

0.551

5

0.197

 

2 m

 

FT-V41

 

 

60 2.362

10

0.394

7

0.276

3

0.118

 

 

 

 

 

6.562 ft

 

 

 

Sleeve part cannot be bent.

27 1.063

 

 

5

0.197

 

 

 

 

 

Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.

2)The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type.

The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent condition.

3)Sensing range for a 2 m 6.562 ft long fiber. A 10 m 32.808 ft long fiber will cause damping of the beam and cannot be used.

4)The fiber cutter is not supplied as an accessory with FT-NB8 and FT-N8. Please order it separately.

08/2005

73

 

FX-301

LIST OF FIBERS

Sharp bending fibers / Flexible fibers [Thru-beam type (one pair set)]

Type

 

Widebeam

 

Rectangularhead

Sharpbending

rangeNarrowbeam

 

Longsensing

 

Standard

 

Smalldiameter

 

Side-view

 

Rectangularhead

Flexible

Standard

 

Smalldiameter

 

 

Shape of fiber head

Sensing range (mm in) (Note 1)

 

 

:LONG

:FAST

Min. sensing object

Fiber cable

Allowable

 

 

 

:STD

:S-D

Model No.

(mm in)

Red LED

Blue LED Green LED Infrared LED

under the optimum

length

bending

condition (Note 2)

:Free-cut

radius

 

 

 

Wide area sensing

3,500 137.795

2,400 94.488

1,200 47.244

800

31.496

"0.3 mm

 

 

 

Sensing width

3,500 137.795

1,200 47.244

600

23.622

400

15.748

 

R1 mm

 

32 mm

3,500 137.795

700

27.559

350

13.780

240

9.449

"0.012 in

2 m

FT-WA30

R0.039 in

1.260 in

3,500 137.795

 

 

 

 

 

opaque object

6.562 ft

 

W5 H69 D20

 

 

 

 

 

W0.197 H2.717 D0.787

(Note 3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wide area sensing

3,500 137.795

600

23.622

300

11.811

220

8.661

"0.25 mm

 

 

 

Sensing width

 

R1 mm

 

11 mm

1,500 59.055

300

11.811

150

5.906

110

4.331

"0.010 in

2 m

FT-WA8

0.433 in

1,100 43.307

220

8.661

110

4.331

80

3.150

R0.039 in

opaque object

6.562 ft

 

W4.2 H31 D13.5

750 29.528

 

 

 

 

 

 

 

 

W0.165 H1.220 D0.531

 

400

15.748

200

7.874

180

7.087

 

 

 

 

Easy mounting Top sensing

2,500 98.425

"0.08 mm

 

 

 

W3 H8 D12 W0.118 H0.315 D0.472

1,200 47.244

200

7.874

100

3.937

90

3.543

 

 

FT-WZ8H

"0.003 in

 

 

 

850 33.465

140

5.512

70

2.756

65

2.559

 

 

 

opaque object

 

 

 

 

410 16.142

 

 

 

 

 

 

 

 

 

Easy mounting Side sensing

1,500 59.055

240

9.449

120

4.724

100

3.937

"0.05 mm

 

 

 

W3 H12 D8 W0.118 H0.472 D0.315

700 27.559

120

4.724

60

2.362

50

1.969

 

R1 mm

FT-WZ8E

"0.0020 in

2 m

 

500 19.685

80

3.150

40

1.575

30

1.181

R0.039 in

 

opaque object

6.562 ft

 

 

210 8.268

 

 

 

 

 

 

 

 

Easy mounting Front sensing

700 27.559

80

3.150

40

1.575

36

1.417

"0.04 mm

 

 

 

W8.5 H12 D3 W0.335 H0.472 D0.118

330 12.992

40

1.575

20

0.787

18

0.709

 

 

FT-WZ8

"0.0016 in

 

 

 

240 9.449

25

0.984

13

0.512

12

0.472

 

 

 

opaque object

 

 

 

 

120 4.724

 

 

 

 

 

 

 

 

 

Side-view type with small light

1,700 66.929

300

11.811

160

6.299

150

5.906

"0.06 mm

 

 

 

dispersion

700 27.559

150

5.906

80

3.150

75

2.953

 

R1 mm

FT-WKV8

 

"0.0024 in

2 m

 

600 23.622

100

3.937

60

2.362

45

1.772

R0.039 in

 

opaque object

6.562 ft

 

 

300 11.811

 

 

 

 

 

 

 

 

With lens Long sensing range

1,200 47.244

240

9.449

120

4.724

110

4.331

"0.02 mm

 

 

 

 

600 23.622

120

4.724

60

2.362

55

2.165

 

R1 mm

FT-WS8L

 

"0.0008 in

2 m

 

420 16.535

90

3.543

40

1.575

35

1.378

R0.039 in

 

opaque object

6.562 ft

 

 

210 8.268

 

 

 

 

 

 

 

 

Lens mountable

 

 

 

 

 

 

 

"0.03 mm

 

 

FT-W8

 

 

 

 

 

 

 

 

"0.0012 in

 

 

 

570 22.441

90

3.543

56

2.205

42

1.654

opaque object

 

 

 

 

"0.05 mm

 

R1 mm

 

 

290 11.417

45

1.772

28

1.102

21

0.827

"0.0020 in

2 m

FT-WS3

 

200 7.874

30

1.181

20

0.787

15

0.591

R0.039 in

 

opaque object

6.562 ft

 

 

100 3.937

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.03 mm

 

 

FT-WS8

 

 

 

 

 

 

 

 

"0.0012 in

 

 

 

 

 

 

 

 

 

 

opaque object

 

 

 

 

160 6.299

16

0.630

10

0.394

8

0.315

"0.02 mm

 

 

FT-W4

 

80 3.150

8

0.315

5

0.197

4

0.157

 

R1 mm

 

"0.0008 in

2 m

 

 

55 2.165

5

0.197

3

0.118

2.5

0.098

R0.039 in

FT-WS4

 

opaque object

6.562 ft

 

28 1.102

 

 

 

 

 

 

 

 

90 3.543

 

 

 

 

 

 

"0.02 mm

 

 

 

 

40 1.575

 

 

 

 

 

 

 

R1 mm

FT-WV42

 

 

 

 

"0.0008 in

2 m

 

30 1.181

 

 

 

 

 

 

R0.039 in

 

 

 

 

opaque object

6.562 ft

 

Sleeve part cannot be bent.

15 0.591

 

 

 

 

 

 

 

 

Easy mounting Top sensing

2,700 106.299

560

22.047

200

7.874

180

7.087

 

 

 

 

W3 H8 D12 W0.118 H0.315 D0.472

1,400 55.118

280

11.024

100

3.937

90

3.543

 

 

 

FT-Z8H

 

1,000 39.370

200

7.874

65

2.559

65

2.559

 

 

 

 

 

 

 

 

 

490 19.291

 

 

 

 

 

 

 

 

 

 

Easy mounting Side sensing

1,600 62.992

400

15.748

200

7.874

140

5.512

"0.03 mm

 

 

 

W3 H12 D8 W0.118 H0.472 D0.315

800 31.496

200

7.874

100

3.937

70

2.756

 

R4 mm

FT-Z8E

"0.0012 in

2 m

 

600 23.622

140

5.512

65

2.559

50

1.969

R0.157 in

 

opaque object

6.562 ft

 

 

280 11.024

 

 

 

 

 

 

 

 

Easy mounting Front sensing

800 31.496

120

4.724

60

2.362

46

1.811

 

 

 

 

W8.5 H12 D3 W0.335 H0.472 D0.118

400 15.748

60

2.362

30

1.181

23

0.906

 

 

 

FT-Z8

 

300 11.811

40

1.575

22

0.866

16

0.630

 

 

 

 

 

 

 

 

 

140 5.512

 

 

 

 

 

 

 

 

 

 

Lens mountable

650 25.591

130

5.118

70

2.756

56

2.205

 

 

 

 

 

320 12.598

65

2.559

35

1.378

28

1.102

 

 

 

FT-P80

 

230 9.055

45

1.772

25

0.984

20

0.787

"0.04 mm

 

 

 

 

 

 

 

110 4.331

 

 

 

 

 

 

 

R4 mm

 

 

 

 

 

"0.0016 in

2 m

 

Lens mountable

400 15.748

50

1.969

26

1.024

20

0.787

R0.157 in

 

opaque object

6.562 ft

 

 

190 7.480

25

0.984

13

0.512

10

0.394

 

FT-P60

 

 

 

 

 

140 5.512

18

0.709

8

0.315

7

0.276

 

 

 

 

 

 

 

 

 

80 3.150

 

 

 

 

 

 

 

 

 

 

 

250 9.843

32

1.260

18

0.709

14

0.551

 

 

 

 

 

100 3.937

16

0.630

9

0.354

7

0.276

 

2 m

 

FT-P40

 

75 2.953

12

0.472

7

0.276

5

0.197

 

 

 

 

6.562 ft

 

 

 

35 1.378

 

 

 

 

 

 

 

 

 

 

280 11.024

36

1.417

20

0.787

18

0.709

"0.02 mm

1 m

 

 

 

120 4.724

18

0.709

10

0.394

9

0.354

R4 mm

FT-P2

 

"0.0008 in

 

90 3.543

14

0.551

8

0.315

7

0.276

3.281 ft

R0.157 in

 

opaque object

 

 

42 1.654

 

 

 

 

 

 

 

 

 

 

80 3.150

14

0.551

6

0.236

14

0.551

 

500 mm

 

 

 

40 1.575

7

0.276

3

0.118

7

0.276

 

 

FT-PS1

 

30 1.181

4

0.157

2

0.079

4

0.157

 

19.685 in

 

 

 

 

 

 

17 0.669

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.

2)The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type. The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent condition.

3)The fiber cable length practically limits the sensing range to 3,500 mm 137.795 in long.

74

08/2005

 

FX-301

LIST OF FIBERS

Special use fibers [Thru-beam type (one pair set)]

Type

 

Widebeam

 

Array

Specialuse

Narrowbeam

 

Ultra-smalldiameter

 

Toughflexible

 

Shape of fiber head

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensing range (mm in) (Note 1)

 

 

:LONG

 

 

:FAST

Min. sensing object

Fiber cable

Allowable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

:STD

 

 

:S-D

under the optimum

length

bending

Model No.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(mm in)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Red LED

Blue LED

Green LED

Infrared LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

condition (Note 2)

 

 

:Free-cut

radius

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3,500 137.795

2,400 94.488

1,200 47.244

 

800

31.496

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensing width

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3,500 137.795

1,200 47.244

600

23.622

 

400

15.748

"0.3 mm

 

 

 

 

R10 mm

 

 

 

 

 

 

 

32 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 m

 

 

 

 

 

 

 

1.260 in

 

 

 

 

 

 

 

 

 

 

3,500 137.795

700

27.559

350

13.780

 

240

9.449

"0.012 in

6.562 ft

R0.394 in

FT-A30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W5 H69 D20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3,500 137.795

 

 

 

 

 

 

 

 

opaque object

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W0.197 H2.717 D0.787

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Note 3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensing width

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3,500 137.795

600

23.622

300

11.811

 

220

8.661

"0.25 mm

 

 

 

 

 

 

 

 

 

 

 

 

11 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1,500 59.055

300

11.811

150

5.906

 

110

4.331

"0.010 in

 

 

 

 

R10 mm

FT-A8

 

 

 

 

 

 

0.433 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 m

 

 

 

 

 

 

W4.2

 

H31

 

D13.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1,100 43.307

220

8.661

110

4.331

 

80

3.150

opaque object

6.562 ft

R0.394 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

750 29.528

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W0.165 H1.220 D0.531

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Horizontal:

 

 

 

 

 

 

Top sensing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

650 25.591

 

 

 

120

4.724

60

2.362

 

48

1.890

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W5 H15 D15 W0.197 H0.591 D0.591

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

330 12.992

 

 

 

 

 

60

2.362

30

1.181

 

24

0.945

"0.025 mm

 

 

 

 

 

FT-AFM2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.0010 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

220 8.661

 

 

 

 

 

 

 

40

1.575

20

0.787

 

18

0.709

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

115 4.528

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

opaque object

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 m

 

Side sensing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

590 23.228

 

 

 

120

4.724

60

2.362

 

48

1.890

Vertical:

 

R0.984 in

 

W5

 

H15

 

D15 W0.197

 

H0.591

 

D0.591

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.45 mm

6.562 ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

290 11.417

 

 

 

 

 

60

2.362

30

1.181

 

24

0.945

 

 

 

 

 

FT-AFM2E

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

200 7.874

 

 

 

 

 

 

 

40

1.575

20

0.787

 

18

0.709

"0.018 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100 3.937

 

 

 

 

 

2,000 78.740

 

 

 

 

 

 

 

 

opaque object

 

 

 

 

 

FT-K8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

400

15.748

200

7.874

 

150

5.906

"0.06 mm

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1,000 39.370

200

7.874

100

3.937

 

75

2.953

"0.0024 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 m

 

Side-view

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

800 31.496

130

5.118

65

2.559

 

40

1.575

 

R0.984 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

opaque object

6.562 ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

350 13.780

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FT-KV8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Side-view

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

500 19.685

 

 

 

80

3.150

 

 

 

 

 

 

"0.02 mm

 

 

 

 

 

 

W2 H1.5 D20 W0.079 H0.059 D0.787

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

250 9.843

 

 

 

 

 

 

 

35

1.378

 

 

 

 

 

 

"0.0008 in

 

 

 

 

R10 mm

FT-KV1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

180 7.087

 

 

 

 

 

 

 

10

0.394

 

 

 

 

 

 

opaque object

6.562 ft

R0.394 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100 3.937

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beam diameter: "0.125 mm "0.005 in

 

 

 

 

18 0.709

 

 

 

 

 

 

 

 

 

 

 

3

0.118

1

0.039

 

4

0.157

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10 0.394

 

 

 

 

 

 

 

 

 

 

 

2

0.079

 

 

 

2

0.079

 

500 mm

 

FT-E12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8 0.315

 

 

 

 

 

 

 

 

 

 

 

 

1

0.039

 

 

 

1.5

0.059

"0.02 mm

19.685 in

 

Sleeve part cannot be bent.

 

3 0.118

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R5 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.0008 in

 

 

 

 

 

Beam diameter: "0.25 mm "0.010 in

 

 

 

 

 

 

 

80 3.150

 

 

 

 

 

 

 

 

14

0.551

6

0.236

 

10

0.394

 

 

 

 

R0.197 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

opaque object

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50 1.969

 

 

 

 

 

 

 

 

7

0.276

3

0.118

 

5

0.197

 

1 m

 

FT-E22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

36 1.417

 

 

 

 

 

 

 

 

 

 

4

0.157

2

0.079

 

3

0.118

 

3.281 ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sleeve part cannot be bent.

 

 

15 0.591

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lens mountable

 

 

 

 

 

 

 

 

 

 

 

 

 

650 25.591

 

 

 

130

5.118

64

2.520

 

130

5.118

"0.05 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

320 12.598

 

 

 

 

 

64

2.520

32

1.260

 

64

2.520

 

1 m

R10 mm

FT-P81X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.0020 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

230 9.055

 

 

 

 

 

 

 

45

1.772

22

0.866

 

45

1.772

opaque object

3.281 ft

R0.394 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

110 4.331

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.

2)The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type.

The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent condition.

3)The fiber cable length practically limits the sensing range to 3,500 mm 137.795 in long.

08/2005

75

 

FX-301

LIST OF FIBERS

Environment resistant fibers [Thru-beam type (one pair set)]

Type

 

Heat-resistant

Environmentresistant

Chemical-resistant

 

Vacuum

Shape of fiber head

Sensing range (mm in) (Note 1)

 

 

:LONG

:FAST

Min. sensing object

Fiber cable

Allowable

 

 

 

:STD

:S-D

under the optimum

length

bending

Model No.

(mm in)

Red LED

Blue LED Green LED Infrared LED

condition (Note 2)

:Free-cut

radius

 

 

 

350 C 662 F

 

 

 

 

 

 

 

 

 

 

 

Lens mountable

 

 

 

 

 

 

 

 

 

R25 mm

FT-H35-M2

 

550 21.654

100

3.937

50

1.969

420

16.535

 

 

 

"0.04 mm

2 m

R0.984 in

 

 

280 11.024

50

1.969

25

0.984

210

8.268

 

 

 

"0.0016 in

 

 

350 C 662 F

200 7.874

35

1.378

18

0.709

160

6.299

6.562 ft

Fiber

 

opaque object

 

Sleeve 60 mm 2.362 in

90 3.543

 

 

 

 

 

 

 

R0.984 in

 

 

 

 

 

 

 

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

 

Sleeve FT-H35-M2S6

 

 

 

 

 

 

 

 

 

 

R10 mm

 

 

 

 

 

 

 

 

 

 

 

R0.394 in

 

Allows flexible wiring

 

 

 

 

 

 

 

 

1 m

 

 

200 C 392 F

 

 

 

 

 

 

 

 

 

FT-H20W-M1

Lens mountable

310 12.205

44

1.732

22

0.866

220

8.661

"0.02 mm

3.281 ft

 

 

 

 

 

140 5.512

22

0.866

11

0.433

110

4.331

 

R10 mm

 

 

"0.0008 in

 

 

 

100 3.937

14

0.551

7

0.276

70

2.756

 

R0.394 in

 

 

opaque object

 

 

 

50 1.969

 

 

 

 

 

 

2 m

 

FT-H20W-M2

 

 

 

 

 

 

 

 

 

6.562 ft

 

 

 

 

 

 

 

 

 

 

 

 

200 C 392 F

550 21.654

100

3.937

50

1.969

420

16.535

"0.04 mm

1 m

 

 

Lens mountable

280 11.024

50

1.969

25

0.984

210

8.268

 

FT-H20-M1

"0.0016 in

 

 

200 7.874

35

1.378

18

0.709

160

6.299

3.281 ft

 

 

opaque object

 

 

 

90 3.543

 

 

 

 

 

 

 

R25 mm

 

130 C 266 F

880 34.646

72

2.835

32

1.260

70

2.756

"0.06 mm

 

R0.984 in

 

Lens mountable

440 17.323

36

1.417

16

0.630

35

1.378

 

 

FT-H13-FM2

"0.0024 in

2 m

 

 

300 11.811

26

1.024

10

0.394

25

0.984

 

 

opaque object

6.562 ft

 

 

 

155 6.102

 

 

 

 

 

 

 

 

Easy mounting Rectangular head

 

 

 

 

 

 

 

 

 

 

 

SEMI S2 compliant

 

 

 

 

 

 

 

 

 

 

 

W7 H15 D13

3,500 137.795

320

12.598

160

6.299

320

12.598

"4 mm

 

 

 

W0.276 H0.591 D0.512

1,500 59.055

160

6.299

80

3.150

160

6.299

2 m

R25 mm

FT-Z802Y

"0.157 in

 

1,000 39.370

120

4.724

60

2.362

120

4.724

6.562 ft

R0.984 in

 

opaque object

 

530 20.866

 

 

 

 

 

 

 

 

 

 

3,500 137.795

160

6.299

160

6.299

400

15.748

 

 

 

 

 

1,500 59.055

80

3.150

80

3.150

200

7.874

 

 

 

FT-L8Y

 

1,000 39.370

50

1.969

50

1.969

150

5.906

"0.08 mm

 

 

 

 

 

 

 

530 20.866

 

 

 

 

 

 

2 m

R30 mm

 

 

 

 

 

"0.003 in

 

Side-view

800 31.496

120

4.724

80

3.150

75

2.953

6.562 ft

R1.181 in

 

opaque object

 

 

400 15.748

60

2.362

40

1.575

38

1.496

(Note 3)

 

FT-V8Y

 

 

 

 

280 11.024

35

1.378

25

0.984

24

0.945

 

 

 

 

 

 

 

 

 

140 5.512

 

 

 

 

 

 

 

 

 

 

Lens mountable

470 18.504

100

3.937

46

1.811

70

2.756

 

 

 

 

 

230 9.055

50

1.969

23

0.906

35

1.378

 

 

R200 mm

FT-6V

 

165 6.496

30

1.181

16

0.630

22

0.866

"0.02 mm

 

R7.874 in

 

80 3.150

 

 

 

 

 

 

1 m

 

 

 

 

 

 

"0.0008 in

 

 

 

220 8.661

36

1.417

18

0.709

28

1.102

3.281 ft

 

 

 

opaque object

 

 

 

100 3.937

18

0.709

9

0.354

14

0.551

 

R30 mm

FT-60V

 

 

 

 

75 2.953

12

0.472

6

0.236

10

0.394

 

 

R1.181 in

 

35 1.378

 

 

 

 

 

 

 

 

 

 

Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.

2)The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type. The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent condition.

3)The allowable cutting range is 500 mm 19.685 in from the end that the amplifier inserted.

The vacuum type fiber must be used with the following products as a set.

FT-J6: Fiber at atmospheric side (one pair set) FV-BR1: Photo-terminal (one pair set)

Semi-standard fibers (Custom made per order)

The fiber cable length or sleeve length of the standard fibers can be modified at your request. Select the fiber cable length (symbol ) or the sleeve length (symbol f ) from the table below.

 

Type

Basic model No.

Fiber cable length

f Sleeve length

 

(Unit: m ft)

(Unit: cm in)

 

 

 

 

 

 

 

 

 

 

 

 

Standard threaded

FT-FM

3 9.843, 4 13.123, 5 16.404, 10 32.808,

 

 

 

head (free-cut)

15 49.213, 20 65.617,25 82.021, 30 98.425

 

 

 

 

 

 

 

 

With sleeve

FT-FM -S f

2 6.562 (Note), 3 9.843, 4 13.123, 5 16.404,

1 0.394, 2 0.787, 3 1.181, 4 1.575, 5 1.969, 6 2.362,

 

10 32.808, 15 49.213, 20 65.617, 25 82.021, 30 98.425

7 2.756, 8 3.150, 9 3.543, 10 3.937, 11 4.331, 12

 

 

 

With large diameter lens

FT-FM L

20 65.617, 30 98.425

4.724

 

 

 

 

Small diameter threaded

FT-NFM2-S f

 

 

 

 

 

 

head with sleeve (free-cut)

 

 

 

1 0.394, 2 0.787, 3 1.181, 4 1.575, 5 1.969, 6 2.362,

 

 

FT-WA30-

 

 

 

7 2.756, 8 3.150, 9 3.543, 10 3.937, 11 4.331, 12

 

 

FT-WA8-

 

 

 

4.724

 

 

Wide beam

5 16.404

 

 

 

 

FT-A30-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FT-A8-

 

 

 

 

 

 

200 C 392 F heat-resistant

FT-H20-M

2 6.562, 3 9.843

 

 

 

 

 

 

350 C 662 F heat-resistant

FT-H35-M

3 9.843

 

 

 

 

 

 

 

 

Chemical-resistant

FT-Z80 Y

5 16.404, 7 22.966

 

 

 

 

 

 

Note: The standard fiber has a 2 m 6.562 ft fiber cable length and a 4 cm 1.575 in or 9 cm 3.543 in sleeve length.

Correlation between sensing range attenuation coefficient and fiber cable length

The longer the fiber cable, the shorter the sensing range.

76

08/2005

 

FX-301

LIST OF FIBERS

Standard fibers (Reflective type)

 

Shape of fiber head

Sensing range (mm in ) (Note 1, 2)

 

:LONG

 

:FAST

Min. sensing object

Fiber cable

Allowable

 

Type

 

:STD

 

:S-D

at the maximum

length

bending

Model No.

 

 

 

 

 

 

(mm in)

Red LED

Blue LED Green LED Infrared LED

 

sensitivity (Note 3)

 

:Free-cut

radius

 

 

 

 

 

range

480 18.898

80

3.150

42

1.654

26

1.654

"0.02 mm

 

 

 

sensing

220 8.661

40

1.575

21

0.827

13

0.827

"0.0008 in

2 m

 

FD-B8

160 6.299

26

1.024

14

0.551

9

0.551

 

gold wire

 

Long

75 2.953

 

 

 

 

 

 

6.562 ft

 

 

 

 

 

 

 

 

Coaxial

310 12.205

46

1.811

24

0.945

90

3.543

 

500 mm

 

 

 

140 5.512

23

0.906

12

0.472

45

1.772

 

R25 mm

FD-5

 

100 3.937

15

0.591

8

0.315

30

1.181

"0.02 mm

19.685 in

R0.984 in

 

47 1.850

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.0008 in

 

 

 

 

310 12.205

46

1.811

24

0.945

20

0.787

 

 

 

 

gold wire

 

 

 

 

140 5.512

23

0.906

12

0.472

10

0.394

 

 

FD-FM2

 

 

2 m

 

 

100 3.937

15

0.591

8

0.315

7

0.276

 

 

 

 

6.562 ft

 

 

 

47 1.850

 

 

 

 

 

 

 

 

 

 

Sleeve 90 mm 3.543 in

 

 

 

 

 

 

 

 

 

Fiber

 

 

 

 

 

 

 

 

 

 

 

 

FD-FM2S

 

 

270 10.630

46

1.811

24

0.945

20

0.787

"0.02 mm

 

R25 mm

 

 

 

R0.984 in

 

 

 

110 4.331

23

0.906

12

0.472

10

0.394

 

 

 

 

"0.0008 in

2 m

 

 

Sleeve 40 mm 1.575 in

85 3.346

15

0.591

8

0.315

7

0.276

Sleeve

 

 

gold wire

6.562 ft

 

 

 

39 1.535

 

 

 

 

 

 

R10 mm

FD-FM2S4

 

 

 

 

 

 

 

 

 

 

 

R0.394 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

270 10.630

46

1.811

24

0.945

20

0.787

 

 

 

 

 

 

110 4.331

23

0.906

12

0.472

10

0.394

 

 

 

FD-T80

 

 

85 3.346

15

0.591

8

0.315

7

0.276

 

 

 

 

 

 

 

 

 

 

 

39 1.535

 

 

 

 

 

 

 

 

 

 

 

Small diameter

90 3.543

16

0.630

8

0.315

6

0.236

"0.02 mm

 

 

 

 

 

45 1.772

8

0.315

4

0.157

3

0.118

 

R25 mm

FD-T40

 

 

"0.0008 in

2 m

 

 

35 1.378

5

0.197

2

0.079

2

0.079

gold wire

6.562 ft

R0.984 in

 

 

 

 

 

 

 

 

 

 

 

 

16 0.630

 

 

 

 

 

 

 

 

 

270 10.630

46

1.811

24

0.945

20

0.787

 

 

 

 

 

 

110 4.331

23

0.906

12

0.472

10

0.394

 

 

 

FD-S80

 

 

85 3.346

15

0.591

8

0.315

7

0.276

 

 

 

 

 

 

 

 

 

Standard

 

39 1.535

 

 

 

 

 

 

 

2 m

R25 mm

 

 

42 1.654

46

 

24

 

20

 

 

 

 

 

260 10.236

1.811

0.945

0.787

 

 

 

 

 

 

120 4.724

23

0.906

12

0.472

10

0.394

 

 

 

FD-N8

 

 

85 3.346

15

0.591

8

0.315

7

0.276

"0.02 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

75 2.953

16

0.630

8

0.315

4

0.157

"0.0008 in

6.562 ft

R0.984 in

 

 

 

gold wire

 

 

 

38 1.496

8

0.315

4

0.157

2

0.079

(Note 4)

 

FD-N4

 

 

 

 

 

 

28 1.102

5

0.197

2

0.079

1.5

0.059

 

 

 

 

 

 

 

 

 

 

 

13 0.512

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R25 mm

FD-NFM2

 

 

 

 

 

 

 

 

 

 

 

R0.984 in

 

 

Sleeve 90 mm 3.543 in

 

 

 

 

 

 

 

 

 

Fiber

 

 

 

 

 

 

 

 

 

 

 

 

FD-NFM2S

 

 

90 3.543

16

0.630

8

0.315

6

0.236

"0.02 mm

 

R25 mm

 

 

 

R0.984 in

 

 

 

45 1.772

8

0.315

4

0.157

3

0.118

 

 

 

 

"0.0008 in

2 m

 

 

Sleeve 40 mm 1.575 in

35 1.378

5

0.197

2

0.079

2

0.079

Sleeve

 

 

gold wire

6.562 ft

 

 

 

16 0.630

 

 

 

 

 

 

R10 mm

FD-NFM2S4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R0.394 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R25 mm

FD-SNFM2

 

 

 

 

 

 

 

 

 

 

 

R0.984 in

 

Elbow

 

185 7.283

32

1.260

16

0.630

10

0.472

"0.02 mm

 

 

 

 

30 1.181

16

 

8

 

5

 

6.562 ft

R0.984 in

FD-R80

 

gold wire

 

 

85 3.346

0.630

0.315

0.197

"0.0008 in

2 m

R25 mm

 

 

60 2.362

10

0.394

5

0.197

3

0.118

 

 

 

 

 

 

100 3.937

14

0.551

7

0.276

4

0.157

 

 

 

 

view-Side

 

45 1.772

7

0.276

3.5

0.138

 

 

 

 

 

FD-SFM2SV2

 

25 0.984

3

0.118

 

 

 

 

gold wire

6.562 ft

 

 

 

32 1.260

4

0.157

 

 

 

 

"0.02 mm

 

 

 

 

Sleeve part cannot be bent.

16 0.630

 

 

 

 

 

 

 

R25 mm

 

 

 

 

 

"0.0008 in

2 m

 

 

Small diameter

55 2.165

6

0.236

3

0.118

 

 

R0.984 in

 

 

 

 

 

 

 

 

17 0.669

 

 

 

 

 

 

 

 

 

FD-V41

 

 

 

 

 

 

 

 

 

 

Sleeve part cannot be bent.

9 0.354

 

 

 

 

 

 

 

 

 

 

Notes: 1) The sensing range is specified for white non-glossy paper (FD-B8, FD-5, FD-FM2, FD-FM2S, FD-FM2S4, FD-N8, FD-T80, FD-S80 and FD-R80: 400 400 mm 15.748 15.748 in, FD-T40, FD-N4, FD-NFM2, FD-NFM2S, FD-NFM2S4, FD-SNFM2, FD-SFM2SV2 and FD-V41: 200 200 mm 7.874 7.874 in) as the object.

2)Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.

3)The minimum sensing object size is the value for red LED type at maximum sensitivity. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type.

Also, note that the corresponding setting distance is different from the rated sensing distance.

4)The fiber cutter is not supplied as an accessory with FD-N8 and FD-N4. Please order it separately.

08/2005

77

 

FX-301

LIST OF FIBERS

Sharp bending fibers / Flexible fibers (Reflective type)

Type

Long sensing range

Standard

High precision

Sharp bending

-Fixed reflectivefocus

view-Side

Standard

Flexible

Small diameter

Shape of fiber head

Sensing range (mm in) (Note 1, 2)

 

:LONG

:FAST

Min. sensing object

Fiber cable

Allowable

 

 

:STD

:S-D

at the maximum

length

bending

Model No.

(mm in)

Red LED

Blue LED Green LED Infrared LED

sensitivity (Note 3)

:Free-cut

radius

 

 

 

Long sensing range Rectangular head

20 to 480 0.787 to 18.898

 

 

 

 

 

 

"0.3 mm

 

 

 

 

20 to 230 0.787 to 9.055

 

 

 

 

 

 

 

R1 mm

FD-WKZ1

 

 

 

 

"0.012 in

2 m

 

20 to 170 0.787 to 6.693

 

 

 

 

 

 

R0.039 in

 

 

 

 

copper wire

6.562 ft

 

 

25 to 100 0.984 to 3.937

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

190 7.480

23

0.906

14

0.551

11

0.433

 

 

 

 

 

90 3.543

11

0.433

7

0.276

5.5

0.217

 

 

R1 mm

FD-W8

 

60 2.362

8

0.315

4

0.157

3

0.118

 

 

R0.039 in

 

 

 

 

 

32 1.260

 

 

 

 

 

 

 

 

 

 

Sleeve 40 mm 1.575 in

 

 

 

 

 

 

 

 

 

Fiber

 

 

30 1.181

5

0.197

3

0.118

2

0.079

 

 

R1 mm

 

 

15 0.591

2.5

0.098

1.5

0.059

1

0.039

 

 

R0.039 in

FD-W44

 

12 0.472

1.5

0.059

1

0.039

 

 

 

 

Sleeve

 

 

 

 

 

 

5 0.197

 

 

 

 

 

 

 

 

R10 mm

 

 

 

 

 

 

 

 

 

"0.02 mm

 

R0.394 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.0008 in

2 m

 

 

 

190 7.480

23

0.906

14

0.551

11

0.433

gold wire

6.562 ft

 

FD-WT8

 

 

 

 

 

 

90 3.543

11

0.433

7

0.276

5.5

0.217

 

 

 

 

 

60 2.362

8

0.315

4

0.157

3

0.118

 

 

 

 

 

32 1.260

 

 

 

 

 

 

 

 

R1 mm

FD-WS8

 

 

 

 

 

 

 

 

 

 

R0.039 in

 

 

 

 

 

 

 

 

 

 

 

 

30 1.181

5

0.197

3

0.118

2

0.079

 

 

 

 

 

15 0.591

2.5

0.098

1.5

0.059

1

0.039

 

 

 

FD-WT4

 

12 0.472

1.5

0.059

1

0.039

 

 

 

 

 

 

5 0.197

 

 

 

 

 

 

 

 

 

 

Small spot for sensing minute objects

Coaxial Lens mountable

 

65 2.559

11

0.433

6

0.236

5

0.197

"0.02 mm

 

FD-WG4

 

32 1.260

5

0.197

3

0.118

2.5

0.098

 

R2 mm

 

"0.0008 in

2 m

For sensing minute objects Coaxial

25 0.984

3

0.118

2

0.079

1.5

0.059

R0.079 in

gold wire

6.562 ft

 

11 0.433

 

 

 

 

 

 

FD-WSG4

 

 

 

 

 

 

 

 

 

 

Glass substrate detection

6.5 to 14 0.256 to 0.551 (Convergent point 8 0.315)

 

 

 

 

 

 

"1.9 mm

 

 

 

7 to 12 0.276 to 0.472 (Convergent point 8 0.315)

 

 

 

 

 

 

 

 

W24 H21 D4

 

 

 

"0.075 in

 

FD-WL41

7.5 to 12 0.295 to 0.472 (Convergent point 8 0.315)

 

 

 

 

 

 

 

W0.945 H0.827 0.157

 

 

 

 

 

 

Cannot use

 

 

 

 

 

metal pipe (gray)

 

R1 mm

 

 

 

 

2 m

Specular object detection

0.6 to 3.5 0.024 to 0.138 (Convergent point 2 0.079)

 

 

 

 

 

 

"0.08 mm

R0.039 in

 

 

 

6.562 ft

 

 

 

 

 

 

 

 

 

 

W15 H19 D3

0.9 to 2.7 0.035 to 0.106 (Convergent point 2 0.079)

 

 

 

 

 

 

"0.003 in

 

FD-WL42

1 to 2.5 0.039 to 0.098 (Convergent point 2 0.079)

 

 

 

 

 

 

 

W0.591 H0.748 0.118

 

 

 

gold wire

 

 

 

Cannot use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15 0.591

 

 

 

 

 

 

 

 

 

"0.02 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7 0.276

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.0008 in

 

 

 

R1 mm

FD-WV42

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 0.197

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 m

R0.039 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gold wire

6.562 ft

 

Sleeve part cannot be bent. Cannot use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

220 8.661

40

1.575

20

0.787

18

0.709

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100 3.937

20

0.787

10

0.394

9

0.354

 

 

 

 

 

FD-P80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

70 2.756

13

0.512

7

0.276

6

0.236

 

 

 

 

 

 

 

 

 

 

 

 

35 1.378

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

90 3.543

20

0.787

10

0.394

8

0.315

 

 

 

 

 

FD-P60

 

 

 

 

 

 

 

45 1.772

 

10

0.394

5

0.197

4

0.157

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30 1.181

 

 

 

6

0.236

3

0.118

2.5

0.098

"0.02 mm

 

2 m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16 0.630

 

 

 

 

 

 

 

 

 

6.562 ft

R4 mm

FD-P50

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.0008 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gold wire

 

 

 

R0.157 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

36 1.417

 

5

0.197

3

0.118

2

0.079

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18 0.709

 

 

 

2.5

0.098

1.5

0.059

1

0.039

 

 

 

 

 

FD-P40

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14 0.551

 

 

 

 

1.5

0.059

1

0.039

 

 

 

 

 

 

 

6 0.236

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50 1.969

 

8

0.315

4

0.157

7

0.276

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25 0.984

 

 

 

4

0.157

2

0.079

3.5

0.138

 

1 m

 

FD-P2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19 0.748

 

 

 

2.5

0.098

1.5

0.059

2

0.079

 

3.281 ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9 0.354

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes: 1) The sensing range is specified for white non-glossy paper [100 100 mm 3.937 3.937 in (FD-WKZ1, FD-W8, FD-WT8, FD-WS8 and FD-P80: 400 400 mm 15.748 15.748 in, FD-WG4, FD-WSG4, FD-P60 and FD-P50: 200 200 mm 7.874 7.874 in, FD-WL41: glass substrate 100 100 t 2 mm 3.937 3.937 t 0.472 in)] as the object.

2)Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.

3)The minimum sensing object size is the value for red LED type at maximum sensitivity. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type.

Also, note that the corresponding setting distance is different from the rated sensing distance. However, with the fixed-focus reflective type, when the sensitivity is at MAX., it is only possible to detect the minimum size of the sensing object at a distance corresponding to the convergent point.

78

08/2005

 

FX-301

LIST OF FIBERS

Special use fibers (Reflective type)

 

 

Shape of fiber head

 

 

 

 

 

 

 

 

 

 

 

Sensing range (mm in) (Note 1, 2)

 

 

:LONG

 

:FAST

Min. sensing object

 

Fiber cable

Allowable

 

Type

 

 

 

 

 

 

 

 

 

 

 

 

 

:STD

 

:S-D

at the maximum

 

length

bending

Model No.

 

 

 

 

 

(mm in)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Red LED

Blue LED Green LED Infrared LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

sensitivity (Note 3)

 

 

:Free-cut

radius

 

 

beam

W7 H15 D30 W0.276 H0.591 D1.181

150 5.906

15

0.591

 

 

 

 

 

 

 

 

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

200 7.874

25

0.984

 

 

 

 

 

 

"0.02 mm

 

 

 

 

 

 

FD-A15

 

Wide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100

 

3.937

 

 

 

 

 

 

 

"0.0008 in

 

 

2 m

 

R0.984 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50 1.969

 

 

 

 

 

 

 

 

 

 

 

 

 

gold wire

 

6.562 ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Top sensing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FD-AFM2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Array

 

 

 

 

 

 

 

 

 

 

W5

 

H20

 

D20

220 8.661

40

1.575

 

18

0.709

12

0.472

"0.02 mm

 

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W0.197 H0.787 D0.787

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

110 4.331

20

0.787

 

9

0.354

6

0.236

"0.0008 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 m

 

 

 

 

 

 

 

 

 

 

 

 

Side sensing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

78 3.071

 

 

 

13

0.512

 

5

0.197

4

0.157

 

R0.984 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gold wire

 

 

 

 

 

 

 

 

 

 

 

 

 

W5 H20 D20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

39 1.535

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.562 ft

 

FD-AFM2E

 

 

 

 

 

 

 

 

 

 

 

 

W0.197 H0.787 D0.787

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Coaxial Lens mountable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FD-G4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

110 4.331

22

0.866

 

12

0.472

7

0.276

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

55 2.165

 

 

 

 

 

 

11

0.433

 

6

0.236

3.5

0.138

 

 

2 m

 

 

 

 

Coaxial Lens mountable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

42 1.654

 

 

 

 

 

 

8

0.315

 

4

0.157

2

0.079

"0.02 mm

 

6.562 ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19 0.748

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.0008 in

 

R25 mm

FD-G6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

precision

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gold wire

 

 

 

 

 

R0.984 in

 

 

Coaxial

Lens mountable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 0.236

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

38 1.496

 

 

 

 

 

 

6

0.236

 

3

0.118

10

0.394

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18 0.709

 

 

 

 

 

 

 

 

 

3

0.118

 

1.5

0.059

5

0.197

 

 

 

 

 

 

 

FD-EG1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

High

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14 0.551

 

 

 

 

 

 

 

 

 

 

 

2

0.079

 

1

0.039

3

0.118

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Coaxial

Lens mountable

12 0.472

 

 

 

 

 

 

 

 

 

 

 

 

2

0.079

 

1

0.039

3

0.118

 

 

500 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25 0.984

 

 

 

 

 

 

 

5

0.197

 

2

0.079

6

0.236

 

 

 

 

 

 

 

FD-EG2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9 0.354

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

0.039

 

 

 

2

0.079

"0.04 mm

 

19.685 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 0.197

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R10 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.0016 in

 

 

 

 

 

 

 

 

Coaxial Lens mountable

 

 

 

 

 

 

 

 

 

 

 

 

15 0.591

 

 

 

 

 

 

 

 

 

 

 

2

0.079

 

1

0.039

3

0.118

 

 

 

 

 

R0.394 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gold wire

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8 0.315

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

0.039

 

 

 

1.5

0.059

 

 

 

 

 

 

 

FD-EG3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 0.197

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

0.039

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 0.118

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11 0.433

 

 

 

 

 

 

 

 

 

 

 

 

2

0.079

 

1

0.039

1

0.039

 

 

 

 

 

 

R10 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 0.236

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

0.039

 

 

 

 

 

 

 

 

 

 

 

 

FD-E12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 0.157

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 m

 

R0.394 in

 

diameter

Sleeve part cannot be bent.

1 0.039

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Coaxial

 

 

 

 

 

 

 

 

 

 

 

 

7 0.276

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.02 mm

 

3.281 ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

45 1.772

 

 

 

 

 

 

6

0.236

 

3

0.118

6

0.236

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

23 0.906

 

 

 

 

 

 

 

3

0.118

 

1.5

0.059

3

0.118

 

 

 

 

 

 

 

FD-E22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

17 0.669

 

 

 

 

 

 

 

 

 

 

2

0.079

 

1

0.039

2

0.079

 

 

 

 

 

 

 

 

small-Ultra

Sleeve part cannot be bent.

"0.0008 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

useSpecial

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 0.197

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gold wire

 

500 mm

R25 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

0.118

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FD-EN500S1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 0.079

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19.685 in

R0.984 in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sleeve part cannot be bent.

 

Cannot use

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Coaxial

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

38 1.496

 

 

 

 

 

 

 

6

0.236

 

3

0.118

4

0.157

 

 

1 m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18 0.709

 

 

 

 

 

 

 

 

 

3

0.118

 

1.5

0.059

2

0.079

 

 

 

FD-ENM1S1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14 0.551

 

 

 

 

 

 

 

 

 

 

 

2

0.079

 

1

0.039

1.5

0.059

 

 

3.281 ft

 

 

 

 

Sleeve part cannot be bent.

 

 

 

6 0.236

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Glass substrate detection

 

 

 

 

 

 

 

 

 

R4

 

 

SEMI S2 compliant

0 to 20 0 to 0.787

 

 

 

 

 

 

(LCD glass)

 

FD-L43

 

W17

H29

D3.8

 

 

 

 

R0.157

 

 

 

 

 

 

 

 

 

 

 

 

 

 

reflective

W0.669 H1.142 D0.150

 

 

 

 

 

 

 

 

 

 

 

Glass substrate detection

2.5 to 18 0.098 to 0.709 (Convergent point 8 0.315)

 

 

 

 

 

 

"0.06 mm

 

 

 

W24 H21 D4

3 to 16 0.118 to 0.630 (Convergent point 8 0.315)

 

 

 

 

 

 

"0.0024 in

 

 

FD-L41

W0.945 H0.827 D0.157

3.5 to 15 0.138 to 0.591 (Convergent point 8 0.315)

 

 

 

 

 

 

 

 

 

 

 

Cannot use

 

 

 

 

 

 

gold wire

 

 

 

Fixed-focus

Specular object detection

0.5 to 4 0.020 to 0.157 (Convergent point 2 0.079)

 

 

 

 

 

 

"0.03 mm

2 m

R10 mm

 

W15 H19 D3

1 to 3.8 0.039 to 0.150 (Convergent point 2 0.079)

 

 

 

 

 

 

"0.0012 in

6.562 ft

FD-L42

W0.591 H0.748 D0.118

1.3 to 3.5 0.051 to 0.138 (Convergent point 2 0.079)

 

 

 

 

 

 

gold wire

 

R0.394 in

 

 

 

 

Cannot use

 

 

 

 

 

 

 

 

 

W6 H18 D14

2.5 to 18 0.098 to 0.709 (Convergent point 6 0.236)

4.5to9.5 0.177to0.374

5to9 0.197to0.354 4.5to9.5 0.177to0.374

"0.02 mm

 

 

 

 

W0.236 H0.709 D0.551

4 to 12 0.157 to 0.472 (Convergent point 6 0.236)

5to9

0.197to0.354

5.5to8

0.217to0.315

 

 

"0.0008 in

 

 

FD-L4

 

4.5 to 11 0.177 to 0.433 (Convergent point 6 0.236)

5.5to8 0.217to0.315

 

 

 

 

 

 

 

 

 

 

4.8 to 9.5 0.189 to 0.374 (Convergent point 6 0.236)

 

 

 

 

 

 

gold wire

 

 

 

 

Contact type

 

 

 

 

 

 

 

 

 

 

 

Protective tube

FD-F8Y

sensing

"6 "0.236

 

 

 

 

 

 

 

 

(Liquid)

2 m 6.562 ft

R40 mm R1.575 in

 

 

 

 

 

 

 

 

 

 

Fiber

 

 

 

 

 

 

 

 

 

 

 

 

(Note 4)

R15 mm R0.591 in

 

Mountable on pipe

Applicable pipe diameter:

 

 

 

 

 

 

 

2 m

 

FD-F41

level

Standard

 

Outer dia. "6 to "26 mm "0.236 to "1.024 in transparent pipe

 

 

 

6.562 ft

 

 

W25 H13 D20

 

 

 

5 m

 

FD-F91

W0.984 H0.512 D0.787

[PVC, fluorine resin, polycarbonate, acrylic, glass, wall thickness 1 to 3 mm 0.039 to 0.118 in]

 

16.404 ft

R10 mm

Liquid

(Liquid)

Mountable on pipe For PFA, wall

Applicable pipe diameter:

 

 

 

 

 

 

2 m

R0.394 in

FD-F4

 

 

 

 

 

 

 

thickness 1 mm 0.039 in pipe

Outer dia. "6 to "26 mm "0.236 to "1.024 in transparent pipe

 

 

 

6.562 ft

 

 

W25 H13 D20

 

 

 

5 m

 

FD-F9

 

 

 

 

 

 

[PFA (fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in]

 

 

 

W0.984 H0.512 D0.787

 

 

 

 

 

 

 

 

16.404 ft

 

 

flexible

 

 

 

185 7.283

32

1.260

16

0.630

30

1.181

 

1 m

 

 

 

 

 

80 3.150

16

0.630

8

0.315

15

0.591

 

 

FD-P81X

 

 

 

60 2.362

10

0.394

5

0.197

10

0.394

"0.02 mm

3.281 ft

 

 

 

 

 

 

 

 

 

35 1.378

 

 

 

 

 

 

 

R10 mm

 

Tough

 

 

 

 

 

 

 

 

 

 

"0.0008 in

 

 

Small spot for sensing minute objects

90 3.543

22

0.866

12

0.472

18

0.709

 

R0.394 in

 

gold wire

 

 

 

 

 

45 1.772

11

0.433

6

0.236

9

0.354

 

1 m 3.281 ft

 

FD-G6X

 

 

 

35 1.378

6

0.236

4

0.157

5

0.197

 

 

 

Coaxial High precision

20 0.787

 

 

 

 

 

 

 

(Note 4)

 

 

Notes: 1) The sensing range is specified for white non-glossy paper [100 100 mm 3.937 3.937 in (FD-A15, FD-G4, FD-G6X: 200 200 mm 7.874 7.874 in,

 

FD-AFM2, FD-AFM2E, FD-P81X: 400 400 mm 15.748 15.748 in, FD-L43: glass substrate 76 52 t 1.1 mm 2.992 2.047 t 0.043 in, FD-L41:

 

glass substrate 100 100 t 2 mm 3.937 3.937 t 0.079 in)] as the object.

 

 

 

 

 

 

 

 

2)Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.

3)The minimum sensing object size is the value for red LED type at maximum sensitivity. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type.

Also, note that the corresponding setting distance is different from the rated sensing distance. However, with the fixed-focus reflective type, when the sensitivity is at MAX., it is only possible to detect the minimum size of the sensing object at a distance corresponding to the convergent point.

4)Following is the allowable cutting range from the end that the amplifier is inserted FD-F8Y: 1,000 mm 39.370 in, FD-G6X: 700 mm 27.559 in.

08/2005

79

 

FX-301

LIST OF FIBERS

Environment resistant fibers (Reflective type)

Type

Environmentresistant

Heat-resistant

Vacuum

Shape of fiber head

Sensing range (mm in) (Note 1, 2)

 

:LONG

:FAST

Min. sensing object

Fiber cable

Allowable

 

 

:STD

:S-D

at the maximum

length

bending

Model No.

(mm in)

Red LED

Blue LED Green LED Infrared LED

sensitivity (Note 3)

:Free-cut

radius

 

 

 

350 C 662 F Coaxial

 

 

 

 

 

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

 

FD-H35-M2

 

 

 

 

 

 

 

 

 

 

R0.984 in

350 C 662 F Sleeve 60 mm 2.362 in

270 10.630

36

1.417

20

0.787

140

5.512

"0.02 mm

2 m

R25 mm

 

6.562 ft

 

 

 

 

 

 

 

 

 

 

 

Fiber

 

 

140 5.512

18

0.709

10

0.394

70

2.756

"0.0008 in

 

R0.984 in

FD-H35-M2S6

 

100 3.937

12

0.472

7

0.276

45

1.772

 

Sleeve

 

gold wire

 

R10 mm

 

 

47 1.850

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R0.394 in

 

200 C 392 F Coaxial

 

 

 

 

 

 

 

 

 

R25 mm

 

 

 

 

 

 

 

 

 

 

1 m

FD-H20-M1

 

 

 

 

 

 

 

 

 

3,281 ft

R0.984 in

 

350 C 662 F Sleeve 90 mm 3.543 in

160 6.299

22

0.866

12

0.472

80

3.150

"0.02 mm

 

Fiber

 

 

80 3.150

11

0.433

6

0.236

40

1.575

1 m

R25 mm

 

 

"0.0008 in

R0.984 in

FD-H35-20S

 

57 2.244

7

0.276

4

0.157

28

1.102

3,281 ft

Sleeve

 

gold wire

R10 mm

 

 

 

 

 

 

 

 

 

 

26 1.024

 

 

 

 

 

R0.394 in

 

200 C 392 F Coaxial

270 10.630

36

1.417

20

0.787

140

5.512

"0.02 mm

 

R25 mm

 

 

140 5.512

18

0.709

10

0.394

70

2.756

1 m

FD-H20-21

 

"0.0008 in

 

100 3.937

12

0.472

7

0.276

45

1.772

3,281 ft

R0.984 in

 

47 1.850

 

 

 

 

 

 

gold wire

 

 

 

 

 

 

 

 

 

 

 

300 C 572 F Glass substrate detection

 

 

 

 

 

 

 

 

 

 

 

Fixed-focus reflective type

 

 

 

 

 

 

 

 

2 m

 

FD-H30-L32

W19 H27 D5

 

 

 

 

 

 

 

 

 

0 to 15 0 to 0.591

 

 

 

 

 

 

 

6.562 ft

 

W0.748 H1.063

 

 

 

"0.02 mm

R25 mm

 

D0.197

0 to 10 0 to 0.394

 

 

 

 

 

 

 

 

 

 

 

"0.0008 in

 

 

180 C 356 F Glass substrate detection

1 to 8 0.039 to 0.315

 

 

 

 

 

 

 

R0.984 in

 

 

 

 

gold wire

 

 

Fixed-focus reflective type

2 to 6 0.079 to 0.236

 

 

 

 

 

 

 

 

FD-H18-L31

 

 

 

 

 

 

 

 

 

 

W19 H27 D5

 

 

 

 

 

 

 

 

2 m

 

W0.748 H1.063

 

 

 

 

 

 

 

 

6.562 ft

 

 

D0.197

 

 

 

 

 

 

 

 

 

 

130 C 266 F

310 12.205

20

0.787

20

0.787

25

0.984

"0.02 mm

 

R25 mm

 

 

140 5.512

11

0.433

11

0.433

12

0.472

 

FD-H13-FM2

 

"0.0008 in

2 m

 

100 3.937

7

0.276

7

0.276

8

0.315

R0.984 in

 

47 1.850

 

 

 

 

 

 

gold wire

6.562 ft

 

 

 

165 6.496

26

1.024

14

0.551

21

0.827

"0.02 mm

1 m

R200 mm

 

 

75 2.953

13

0.512

7

0.276

10

0.394

FD-6V

 

"0.0008 in

 

52 2.047

9

0.354

4

0.157

6

0.236

3,281 ft

R7.874 in

 

26 1.024

 

 

 

 

 

 

gold wire

 

 

 

 

 

 

 

 

 

 

 

Notes: 1) The sensing range is specified for white non-glossy paper [400 400 mm 15.748 15.748 in (FD-H30-L32, FD-H18-L31: glass substrate 50 50 mm 1.969 1.969 in)] as the object.

2)Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.

3)The minimum sensing object size is the value for red LED type at maximum sensitivity. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type. Also, note that the corresponding setting distance is different from the rated sensing distance.

The vacuum type fiber must be used with the following products as a set.

FT-J6: Fiber at atmospheric side (one pair set)

FV-BR1: Photo-terminal (one pair set)

Semi-standard fibers (Custom made per order)

The fiber cable length or sleeve length of the standard fibers can be modified at your request. Select the fiber cable length (symbol ) or the sleeve length (symbol f ) from the table below.

 

Type

Basic model No.

 

Fiber cable length

 

f Sleeve length

 

 

(Unit: m ft)

 

 

(Unit: cm in)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Standard threaded

FD-FM

3

9.843, 4 13.123, 5 16.404,

 

 

 

 

 

 

head (free-cut)

10 32.808, 15 49.213, 20 65.617

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FD-FM -S f

2

6.562 (Note), 3 9.843, 4 13.123,

1

0.394, 2

0.787, 3

1.181, 4 1.575,

 

With sleeve

5

16.404, 10 32.808, 15 49.213,

5

1.969, 6

2.362, 7

2.756, 8 3.150,

 

 

 

20 65.617

 

 

9 3.543, 10 3.937, 11 4.331, 12 4.724

 

 

 

 

 

 

 

 

 

 

 

Small diameter

FD-NFM2-S f

 

 

 

 

1

0.394, 2

0.787, 3

1.181, 4 1.575,

threaded head with

 

 

 

 

5

1.969, 6

2.362, 7

2.756, 8 3.150,

 

 

 

 

sleeve (free-cut)

 

 

 

 

 

9 3.543, 10 3.937, 11 4.331, 12 4.724

 

 

 

 

 

 

 

 

 

 

 

200 C 392 F heat-resistant

FD-H20-M

 

2 6.562, 3 9.843

 

 

 

 

 

 

 

 

 

 

 

 

 

350 C 662 F heat-resistant

FD-H35-M

 

3 9.843

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: The standard fiber has a 2 m 6.562 ft fiber cable length and a 4 cm 1.575 in or 9 cm 3.543 in sleeve length.

Correlation between sensing range attenuation coefficient and fiber cable length

The longer the fiber cable, the shorter the sensing range.

Accessories (attached with fibers)

 

 

 

Fiber cutter

Fiber attachment

 

 

 

FX-CT2

FX-AT2

FX-AT3

FX-AT4

 

 

(for fixed-length fiber)

for "2.2 mm

(for "1 mm "0.039 in fiber)

 

 

("0.087 in fiber)

FX-AT5

 

 

 

 

(for "1.3 mm "0.051 in

 

 

 

 

FX-AT6

)

 

 

 

for "1 mm "0.039 in and "1.3 mm

 

 

 

("0.051 in mixed fiber

Notes: 1) Fiber cutter is not supplied as accessory along with FT-NB8, FT-N8, FD-N8 and FD-N4. Please order it separately.

2) The fiber attachment is not attached with FT-N8/NB8/P80 and FD-N8/P80. The previous FX-AT10 attachment is attached with FD-N4.

80

08/2005

 

FX-301

FIBER OPTIONS

Lens (For thru-beam type fiber)

Designation Model No.

Expansion

lens FX-LE1

(Note 1)

fiber

Super-

 

 

 

type

expansion

FX-LE2

lens

 

 

 

thru-beam

(Note 1)

 

 

 

For

 

 

Side-

view FX-SV1 lens

Expansion lens for

vacuum FV-LE1 fiber

(Note 1)

Description

Increases the sensing range by 5 times or

Sensing range (mm) [Lens on both sides] (Note 2)

more.

Fiber Mode

LONG

STD

FAST

S-D

• Ambient temperature:

FT-B8

3,500 (Note 3)

2,500

2,000

1,000

60 to 350 C

FT-FM2

3,500 (Note 3)

3,500 (Note 3)

2,500

1,300

76 to 662 F

FT-T80

3,500 (Note 3)

3,500 (Note 3)

2,500

1,300

 

 

FT-R80

3,500 (Note 3)

2,300

1,600

800

 

FT-W8

3,500 (Note 3)

2,900

2,000

1,000

 

FT-P80

3,500 (Note 3)

3,500 (Note 3)

2,500

1,100

 

FT-P60

3,500 (Note 3)

3,500 (Note 3)

1,500

900

 

FT-P81X

3,500 (Note 3)

3,500 (Note 3)

2,500

1,100

 

FT-H35-M2

3,500 (Note 3)

2,000

1,500

750

 

FT-H20W-M1

1,600 (Note 3)

1,300

900

500

 

FT-H20W-M2

2,600

1,300

900

500

 

FT-H20-M1

1,600 (Note 3)

1,600 (Note 3)

1,100

900

Tremendously increases the sensing range with large diameter lenses.

Ambient temperature:60 to 350 C76 to 662 F

Sensing range (mm) [Lens on both sides] (Note 2)

Fiber Mode

LONG

STD

FAST

S-D

FT-B8

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

FT-FM2

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

FT-R80

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

FT-W8

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

FT-P80

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

FT-P60

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

FT-P81X

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

FT-H35-M2

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

FT-H20W-M1

1,600 (Note 3)

1,600 (Note 3)

1,600 (Note 3)

1,500

FT-H20W-M2

3,500 (Note 3)

3,500 (Note 3)

3,000

1,500

FT-H20-M1

1,600 (Note 3)

1,600 (Note 3)

1,600 (Note 3)

1,600 (Note 3)

FT-H13-FM2

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

3,500 (Note 3)

Beam axis is bent by 90 .

Ambient temperature:60 to 300 C76 to 572 F

Sensing range (mm) [Lens on both sides] (Note 2)

Fiber Mode

LONG

STD

FAST

S-D

FT-B8

1,100

530

400

186

FT-FM2

1,200

600

440

210

FT-T80

1,200

600

440

210

FT-W8

900

450

330

160

FT-P80

1,200

600

440

210

FT-P60

650

300

200

130

FT-P81X

1,200

600

440

200

FT-H35-M2

550

280

200

90

FT-H20W-M1

310

140

100

50

FT-H20W-M2

310

140

100

50

FT-H20-M1

550

280

200

90

Sensing range increases by 15 times or

Sensing range (mm) [Lens on both sides] (Note 2)

more.

 

 

 

 

 

 

 

 

 

 

Mode

LONG

STD

FAST

S-D

 

• Ambient temperature:

 

 

 

Fiber

 

 

 

 

 

40 to 120

C

 

FT-6V

3,500 (Note 3)

2,700

1,800

940

 

40 to 248

F

 

FT-60V

2,800

1,450

1,000

490

 

 

 

 

 

 

 

 

Notes: 1) Be careful when installing the thru-beam type fiber equipped with the expansion lens, as the beam envelope becomes narrow and alignment is difficult.

Especially when installing a fiber with many cores (sharp bending fibers and heat-resistant glass fiber) please be sure to use it only after you have adjusted it sufficiently. Notes: 2) The sensing ranges are the values for red LED type amplifier. Please contact our office for details on sensing ranges for other types of amplifiers. Notes: 3) The fiber cable length practically limits the sensing range to 3.500 mm 137.795 in long (FT-H20W-M1 and FT-H20-M1: 1,600 mm 62.992 in).

Lens (For reflective type fiber)

Designation

Pinpoint spot lens

 

Zoom lens

 

typefiber

Finest spot

reflectiveFor

lens

 

 

 

 

Finest spot

 

lens

 

 

Zoom lens

 

 

Side-view

)

 

(type

Model No.

FX-MR1

FX-MR2

FX-MR3

FX-MR6

FX-MR5

Description

Pinpoint spot of "0.5 mm "0.020 in. Enables detection of minute objects or small marks.

• Applicable fibers: FD-WG4, FD-G4 • Distance to focal point: 6 1 mm 0.236 0.039 in

• Ambient temperature: 40 to 70 C 40 to 158 F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The spot diameter is adjustable from "0.7 mm

Sensing range (Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"0.028 in to "2 mm "0.079 in according to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Screw-in depth

Distance to focal point

Spot diameter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

how much the fiber is screwed in.

7 mm

"18.5 mm approx.

"0.7 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Applicable fibers: FD-WG4, FD-G4

12 mm

"27 mm approx.

"1.2 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Ambient temperature: 40 to 70 C 40 to 158 F

14 mm

"43 mm approx.

"2.0 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Accessory: MS-EX-3 (mounting bracket)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Extremely fine spot of "0.3 mm "0.012 in approx. Sensing range (Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

achieved.

Fiber

Distance to focal point

Spot diameter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Applicable fibers: FD-WG4, FD-G4, FD-EG1,FD-EG2,

FD-EG3

7.5 0.5 mm

"0.15 mm approx.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FD-EG3, FD-G6X, FD-G6

FD-EG2

7.5 0.5 mm

"0.2 mm approx.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Ambient temperature: 40 to 70 C 40 to 158 F

FD-EG1

7.5 0.5 mm

"0.3 mm approx.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FD-WG4/G4/G6X/G6

7.5 0.5 mm

"0.5 mm approx.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Extremely fine spot of "0.1 mm "0.004 in approx. Sensing range (Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

achieved.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fiber

Distance to focal point

Spot diameter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Applicable fibers: FD-WG4, FD-G4, FD-EG1,FD-EG2,

FD-EG3

7 0.5 mm

"0.1 mm approx.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FD-EG3, FD-G6X, FD-G6

FD-EG2

7 0.5 mm

"0.15 mm approx.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Ambient temperature: 20 to 60 C 4 to 140 F

FD-EG1

7 0.5 mm

"0.2 mm approx.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FD-WG4/G4/G6X/G6

7 0.5 mm

"0.4 mm approx.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FX-MR2 is converted into a side-view type and

Sensing range (Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

can be mounted in a very small space.

Screw-in depth

Distance to focal point

Spot diameter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8 mm

13 mm approx.

"0.5 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Applicable fibers: FD-WG4, FD-G4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10 mm

15 mm approx.

"0.8 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Ambient temperature: 40 to 70 C 40 to 158 F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14 mm

30 mm approx.

"3.0 mm

Note: The sensing ranges are the values when used in combination with red LED type amplifier. Please contact our office for details on sensing distances for other types of amplifier.

08/2005

81

 

FX-301

FIBER OPTIONS

Others

Designation

Model No.

 

 

 

Description

 

 

 

 

 

 

 

 

 

 

FTP-500 (0.5 m 1.640 ft)

 

 

FT-B8

 

FT-N8

 

 

 

For

 

FT-NB8

 

FT-P80

 

 

FTP-1000 (1 m 3.281 ft)

 

 

 

M4

 

FT-FM2

 

FT-P60

 

Protective tube

 

thread

 

FT-FM2S

 

FT-H13-FM2

 

FTP-1500 (1.5 m 4.921 ft)

 

 

 

 

FT-FM2S4

 

 

 

(typeFor thrufiber-beam)

 

 

 

 

 

 

 

FTP-N500 (0.5 m 1.640 ft)

For

 

FT-T80

 

FT-P40

The protective

 

 

fibers

FT-NFM2

 

FD-T40

 

FTP-N1000 (1 m 3.281 ft)

 

M3

FT-NFM2S

 

FD-P40

tube, made of

 

 

thread

 

non-corrosive

 

FTP-N1500 (1.5 m 4.921 ft)

FT-NFM2S4

 

 

 

 

Applicable

 

 

stainless steel,

 

FDP-1000 (1 m 3.281 ft)

M6

FD-FM2S

 

 

from any

 

FDP-500 (0.5 m 1.640 ft)

 

 

FD-B8

 

FD-P80

protects the

 

 

For

 

FD-FM2

 

FD-H13-FM2

inner fiber cable

Protective tube

 

thread

 

FD-FM2S4

 

 

external forces.

FDP-1500 (1.5 m 4.921 ft)

 

 

 

 

 

FD-N8

 

 

 

For reflective

 

 

 

 

 

 

 

 

 

 

FD-T80

 

 

 

(type fiber )

FDP-N500 (0.5 m 1.640 ft)

 

 

 

 

 

For

 

FD-N4

 

 

 

 

FDP-N1000 (1 m 3.281 ft)

 

 

 

 

 

M4

 

FD-NFM2

 

 

 

 

 

thread

 

FD-NFM2S

 

 

 

 

FDP-N1500 (1.5 m 4.921 ft)

 

 

 

 

 

 

 

FD-NFM2S4

 

 

 

Fiber bender

FB-1

The fiber bender bends the sleeve part of the fiber head at the

proper radius. (Note 1)

 

 

 

 

 

 

 

 

Universal sensor

MS-AJ1-F

Horizontal mounting type

 

Mounting stand assembly for fiber

mounting stand

 

MS-AJ2-F

Vertical mounting type

 

(For M3, M4 or M6 threaded head fiber)

(Note 2)

 

 

 

 

 

FX-CT2

The free-cut type fiber can be easily cut.

 

Fiber cutter

 

Accessory. Does not attach with the FT-N8/NB8 or the

FX-CT1

 

FD-N8/N4. (Note 3)

 

 

 

Attachment for fixed-

FX-AT2

This is the attachment for the fixed length fiber. (Accessory)

length fiber

 

 

 

 

 

 

 

Attachment for "2.2 mm

FX-AT3

This is the attachment for the "2.2 mm "0.087 in fiber.

"0.087 in fiber

 

(Accessory. Does not attach with the FT-N8/NB8/P80 or the FD-N8/P80.)

 

 

 

Attachment for "1 mm

FX-AT4

This is the attachment for the "1 mm "0.039 in fiber

"0.039 in fiber

 

(Accessory. Does not attach with the FD-N4.) (Note 4)

Attachment for "1.3 mm

FX-AT5

This is the attachment for the "1.3 mm "0.051 in fiber (Accessory)

"0.051 in fiber

 

 

 

 

 

 

 

Attachment for "1 mm

FX-AT6

This is the attachment for the "1 mm"0.039 in / "1.3 mm

"0.039 in / "1.3 mm

"0.051 in mixed fiber. (Accessory)

 

"0.051 in mixed fiber

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes: 1) Do not bend the sleeve part of any side-view type fiber or ultra-small diameter head type fiber.

2)Refer to p.332l for details of the universal sensor mounting stand.

3)A conventional FX-CT1 fiber cutter is attached with the FT-P80 and the FD-P80.

4)The conventional FX-AT10 fiber attachment is attached with the FD-N4.

Fiber attachment

It’s possible to simultaneously cut two fibers to the same length

Protective tube

FTP-

FDP-

Fiber bender

FB-1

Universal sensor mounting stand

MS-AJ1-F

MS-AJ2-F

Using the arm which enables adjustment in the horizontal direction, sensing can also be done from above an assembly line.

Note: The above figure is MS-AJ1-F. The mounting base of MS-AJ2-F has a different shape.

Fiber cutter

FX-CT2

FX-CT1

Each fiber (with some exceptions) has a newly developed two-in-one fiber attachment (FX-AT3/AT4/AT5/AT6) which enables two fibers to be cut simultaneously to the same length with the new fiber cutter (FX-CT2). Also, since the fibers can be attached to the amplifier while being fixed in position in the two-in-one fiber attachment, sensitivity changes resulting from variation in the amount of fiber insertion do not occur.

FX-AT2

FX-AT3

FX-AT4/AT5/AT6

82

08/2005

 

FX-301

SPECIFICATIONS

Amplifiers

 

 

 

 

 

 

 

 

 

 

Type

 

NPN output

 

 

PNP output

 

 

Red LED

Blue LED

Green LED

Infrared LED

Red LED

Blue LED

Green LED

Infrared LED

 

 

Item

Model No.

FX-301

FX-301B

FX-301G

FX-301H

FX-301P

FX-301BP FX-301GP

FX-301HP

Supply voltage

 

 

 

12 to 24 V DC 10 %

Ripple P-P 10 % or less

 

 

 

 

 

<Red LED / Infrared LED type>

 

 

 

<Blue LED / Green LED type>

 

 

 

 

 

Normal operation: 960 mW or less

 

)

 

Normal operation: 720 mW or less

 

 

 

 

 

 

 

Current consumption 40 mA or less at

 

(

Current consumption 30 mA or less at

)

Power consumption

 

 

(24 V supply voltage

 

 

24 V supply voltage

 

 

 

 

ECO mode: 600 mW or less

 

 

 

)

 

ECO mode: 430 mW or less

 

 

 

)

 

 

 

 

Current consumption 25 mA or less at 24 V

 

Current consumption 18 mA or less at 24 V

 

 

 

(supply voltage

 

 

 

 

(supply voltage

 

 

 

 

 

 

NPN open-collector transistor

 

 

 

PNP open-collector transistor

 

 

 

 

 

 

 

• Maximum sink current:100 mA

 

 

 

• Maximum source current: 100 mA

 

 

 

 

 

 

(

50 mA, if five, or more, amplifiers )

 

 

 

 

(50 mA, if five, or more, amplifiers )

Output

 

 

 

are connected in cascade.

 

 

 

 

 

are connected in cascade.

 

• Applied voltage: 30 V DC or less (between output and 0 V)

 

 

• Applied voltage: 30 V DC or less (between output and V)

 

 

 

 

• Residual voltage: 1.5 V or less

 

 

 

• Residual voltage: 1.5 V or less

 

 

 

 

 

 

 

at 100 mA (at 50 mA, if five, or more,

 

 

 

 

at 100 mA (at 50 mA, if five, or more,

 

 

 

 

 

 

amplifiers are connected in cascade)

 

 

 

 

amplifiers are connected in cascade)

 

 

 

 

 

 

sink current.

 

 

 

 

 

source current.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Utilization category

 

 

 

 

 

DC-12 or DC-13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output operation

 

 

 

 

Selectable either Light-ON or Dark-ON, with jog switch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Short-circuit

 

 

 

 

 

Incorporated

 

 

 

 

 

 

 

protection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Response time

65 !s or less (ultra high speed), 150 !s or less (FAST), 250 !s or less [STD / S-D (Red LED type only)], 2 ms or less (LONG) selectable with jog switch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensitivity setting

 

 

2-level teaching / Limit teaching / Manual adjustment / Full auto-teaching (excluding red LED type)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operation indicator

 

 

 

 

Orange LED (lights up when the output is ON)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stability indicator

 

 

Green LED (lights up under stable light received condition or stable dark condition)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MODE indicator

 

 

RUN: Green LED, TEACH ADJ L/D ON TIMER PRO: Yellow LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital display

 

 

 

 

 

4 digit red LED display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fine sensitivity adjustment function

 

 

 

 

 

Incorporated

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Timer function

Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. (timer period: 0.5 to 500 ms approx.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Automatic interference prevention function

 

 

Incorporated (Up to four sets of fiber heads can be mounted close together) (Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pollution degree

 

 

 

 

 

3 (Industrial environment)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10 to 55 °C 14 to 131 °F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If 4 to 7 units are connected in cascade: 10 to 50 °C 14 to 122 °F,

 

 

 

Ambient temperature

 

 

(if 8 to 16 units are connected in cascade: 10 to 45 °C 14 to 113 °F)

 

 

 

 

 

 

 

(No dew condensation or icing allowed),

 

 

 

 

 

 

 

resistance

 

 

 

 

Storage: 20 to 70 °C 4 to 158 °F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ambient humidity

 

 

 

 

35 to 85 % RH, Storage: 35 to 85 % RH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Environmental

Ambient illuminance

 

Sunlight: 10,000?x at the light-receiving face, Incandescent light: 3,000?x at the light-receiving face

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EMC

 

 

 

 

Red LED type: EN 50081-2, EN 50082-2, EN 60947-5-2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blue / green / infrared LED type: EN 60947-5-2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Voltage withstandability

 

1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Insulation resistance

20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vibration resistance

 

 

10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Shock resistance

 

 

98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each

 

 

Emitting element (modulated)

Red LED

 

Blue LED

 

Green LED

Infrared LED

 

 

Red LED

 

Blue LED

Green LED

 

Infrared LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Material

 

 

Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, Switch: Acrylic

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting method

 

 

 

 

 

Connector (Note 3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cable extension

 

 

Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.

 

 

Weight

 

 

 

 

 

25 g approx.

 

 

 

 

 

Notes: 1) When the power supply is switched on, the emission timing are automatically set for interference prevention.

2)The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.

3)The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below. Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft) Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)

08/2005

83

 

FX-301

SPECIFICATIONS

Fibers

Item

Type

 

Standard

Flexible

 

 

 

 

Allowable bending radius

 

R25 mm R0.984 in or more [Sleeve of a head with sleeve:R10 mm R0.394 in or more (Note 1)]

R4 mm R0.157 in or more

 

 

 

 

 

 

 

 

Bending durability

 

 

 

 

1 million times or more (at R10 mm R0.394 in, FT-P40/P2 and FD-P40/P2: at R4 mm R0.157 in)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

40 to 70 °C 40 to 158 °F

40 to 70 °C 40 to 158 °F

 

 

 

 

FT-SFM2SV2: 20 to 70 °C 4 to 158 °F

 

Ambient temperature

 

FT-Z8 , FT-P60, FT-PS1, FD-P60, FD-P50:

 

 

FT-V22, FD-SFM2SV2: 20 to 60 °C 4 to 140 °F

 

 

 

 

( 40 to 60 °C 40 to 140 °F

)

 

 

 

(FT-V41, FD-V41, FT-V10: 40 to 60 °C 40 to 140 °F )

Ambient humidity

 

 

35 to 85%RH (No dew condensation or icing allowed)

 

 

 

 

 

 

 

 

 

 

Fiber core

 

 

 

Acrylic

 

 

 

 

 

 

 

 

Material

Sheath

 

Polyethylene (FT-V22: Polyolefin)

Vinyl chloride (FT-PS1: Polyethylene, FD-P2: Vinyl chloride and Polyurethane)

 

 

 

 

 

 

 

 

 

FT-SFM2L/T80/SFM2/SNFM2/SFM2SV2/V22/V41,

FT/FD-P80, FT-P60: Brass (Nickel plated)

 

 

 

 

Brass (Nickel plated)

Stainless steel (SUS)

 

 

 

 

 

 

 

 

 

Fiber head

 

FD-T80/T40/S80/SNFM2/SFM2SV2/V41 and Sleeve: Stainless steel (SUS)

Case of FT-Z8 : Polycarbonate

 

 

 

 

FT-FM10L: ABS, Lens of FT-FM10L/SFM2L/V10: Acrylic

 

 

 

 

Lens of FT-Z8H/Z8E, Front film of FT-Z8: Polyester

 

 

 

FT-V10: Stainless steel (SUS) and Polycarbonate

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

All fibers (except for FT-NB8/N8 and FD-N8/N4): 1 fiber attachment set

All fibers: 1 fiber attachment set. (except for FT-P80 and FD-P80)

Accessories (Note 2)

 

Free-cut type fibers (except for FT-NB8/N8 and FD-N8/N4): FX-CT2 (fiber cutter) 1 pc.

Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc. (FT/FD-P80: FX-CT1 1 pc.)

 

Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer

Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock

 

 

 

 

 

 

1 pc. (thru-beam type: 2 pcs.)

washer 1 pc. (thru-beam type: 2 pcs.), FT-Z8 : 1 set of mounting screw

 

 

 

 

 

 

 

 

Notes: 1) Sleeve part of side-view fiber cannot be bent.

2)The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.

Item

Type

Sharp bending

 

 

 

Allowable bending radius

 

R1 mm R0.039 in or more (FD-WG4/WSG4: R2 mm R0.079 in or more, Sleeve of FD-W44: R10 mm R0.394 in or more)

 

 

 

 

 

 

Ambient temperature

 

40 to 60 °C 40 to 140 °F (FT-WA30/WA8/WKV8: 40 to 55 °C 40 to 131 °F)

 

Ambient humidity

 

35 to 85 %RH (No dew condensation or icing allowed)

 

 

 

 

 

 

 

Fiber core

 

Acrylic

 

 

 

 

 

 

 

Sheath

 

Polyethylene

 

Material

 

 

 

 

 

 

Case of FT-WA30/WA8/WZ8 , Lens of FT-WS8L and Resin part of FT-WKV8: Polycarbonate, Lens of FT-WA30: Norbornene resin

 

 

 

 

Stainless steel (SUS) (including sleeve)

)

 

 

 

FT-W8/W4, FD-W8/W44/WG4: Brass (Nickel plated)

 

Fiber head

 

Lens of FT-WA8: Polyolefin, Lens of FT-WZ8H/WZ8E, Reflector of FT-WZ8E and Prism of FT-WKV8: Acrylic,

 

 

 

 

 

 

Reflector of FT-WZ8: Polycarbonate, FD-WL41: Heat-resistant ABS, Front film of FD-WL41: Polyester,

 

 

 

(FD-WL42: Aluminum (Black ALMITE), Lens of FD-WKZ1: Optical lens

 

 

 

All fibers: 1 fiber attachment set and FX-CT2 (fiber cutter) 1 pc.

 

 

 

 

Threaded fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1 pc. (thru-beam type: 2 pcs.)

 

Accessories (Note)

 

FT-WA30: 0.5 32 mm 0.020 1.260 in seal type slit mask 2 pcs.

 

 

FT-WA8: 0.5 12 mm 0.020 0.472 in seal type slit mask 2 pcs. and 1 12 mm 0.039 0.472 in seal type slit mask 2 pcs.

 

 

 

 

 

 

 

 

FT-WZ8 : 1 set of mounting screw

 

 

 

 

FD-WKZ1: mounting bracket 1 pc.

 

 

 

 

 

 

Note: The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.

Item

Allowable bending radius

Ambient temperature

Ambient humidity

Material

Fiber core

Sheath

 

 

Fiber head

Accessories (Note)

Type

 

Special use

 

 

 

 

Wide beam

Array

 

Narrow beam

High precision

 

 

FT-A30/A8: R10 mm R0.394 in or more

R25 mm R0.984 in or more

R25 mm R0.984 in or more

FD-EG2/EG3: R10 mm R0.394 in or more

 

FD-A15: R25 mm R0.984 in or more

(FT-KV1: R10 mm R0.394 in or more)

FD-G4/G6/EG1: R25 mm R0.984 in or more

 

 

 

 

FT-A30, FD-A15: 40 to 60 °C 40 to 140 °F

40 to 70 °C

 

40 to 60 °C

20 to 60°C 4 to 140 °F

 

 

 

FD-G4: 40 to 70

°C 40 to 158

°F

 

FT-A8: 40 to 70 °C 40 to 158 °F

40 to 158 °F

 

40 to 140 °F

(FD-G6: 40 to 60

°C 40 to 140

°F )

35 to 85 %RH (No dew condensation or icing allowed)

Acrylic

 

 

Polyethylene

 

Polyolefin (FD-G4/G6: Polyethylene)

Polycarbonate

)

 

Stainless steel (SUS), Polycarbonate

Brass (Nickel plated)

 

Lens of FT-A30, FD-A15: Norbornene resin

Brass (Nickel plated)

Lens: Norbornene resin

 

(Lens of FT-A8: Polyolefin

 

(Lens of FT-KV1:Polycarbonate, Prism of FT-KV8:Acrylic )

[FD-G6: Stainless steel (SUS)]

All fibers: 1 fiber attachment set and

 

 

 

FX-CT2 (fiber cutter) 1 pc.

 

 

 

 

FT-A30: 0.5 32 mm 0.020 1.260 in

All fibers: 1 fiber attachment set

 

seal type slit mask 2 pcs.

 

 

 

Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc.

 

FT-A8: 0.5 12 mm 0.020 0.472 in

 

Threaded head fibers: Nuts 2 pcs. and toothed lock washer 1 pc.

seal type slit mask 2 pcs. and

1 12 mm 0.039 0.472 in

 

 

 

seal type slit mask 2 pcs.

 

 

 

 

 

 

 

 

 

Note: The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.

84

08/2005

 

FX-301

SPECIFICATIONS

Fibers

Item

Allowable bending radius

Ambient temperature

Ambient humidity

Fiber core

Sheath

Material

Fiber head

Accessories (Note 2)

Type

 

 

Special use

 

 

 

Ultra-small diameter

 

Fixed-focus reflective

 

Tough flexible

 

FT-E12/E22: R5 mm R0.197 in or more (Note 1)

 

R10 mm R0.394 in or more

 

 

 

FD-E12: R10 mm R0.394 in or more (Note 1)

 

 

R10 mm R0.394 in or more

 

 

(FD-L43: R4 mm R0.157 in or more)

 

 

FD-E22/EN500S1/ENM1S1: R25 mm R0.984 in or more (Note 1)

 

 

 

 

 

 

 

 

 

FT-E12/E22, FD-E22: 40 to 70 °C 40 to 158 °F

 

FD-L43: 0 to 70 °C 32 to 158 °F

 

40 to 60 °C 40 to 140 °F

 

FD-E12: 40 to 60 °C 40 to 140 °F

 

FD-L41/L42: 40 to 60 °C 40 to 140 °F

 

 

 

 

(FD-P81X: 40 to 70 °C 40 to 158 °F)

 

FD-EN500S1/ENM1S1: 20 to 60 °C 4 to 140 °F

 

FD-L4: 40 to 70 °C 40 to 158 °F

 

 

 

 

 

 

35 to 85 %RH (No dew condensation or icing allowed)

 

 

 

Acrylic

 

 

 

Polyolefin

 

Polyethylene (FD-L42: Vinyl chloride)

 

Polyethylene [FT-P81X: Vinyl chloride,

 

 

 

 

 

 

Protective tube: Stainless steel (SUS)]

 

 

 

 

 

 

 

 

FD-L43/L41: Heat-resistant ABS

 

 

 

Brass (Nickel plated)

 

FD-L4: ABS

 

FT-P81X, FD-P81X: Brass (Nickel plated)

 

 

FD-L42: Aluminum (Black ALMITE)

 

 

[Sleeve: Stainless steel (SUS)]

 

 

FD-G6X: Stainless steel (SUS)

 

 

Lens of FD-L43/L4: Acrylic

 

 

 

 

 

 

 

 

 

(Front film of FD-L41: Polyester )

 

 

 

All fibers: 1 fiber attachment set

 

All fibers: 1 fiber attachment set and

 

All fibers: 1 fiber attachment set , nuts 2

 

 

FX-CT2 (fiber cutter) 1 pc.

 

pcs. (thru-beam type: 4 pcs.) and toothed

 

Threaded head fibers: Nuts 2 pcs. and

 

 

 

 

FD-L4: M2.6 (length 12 mm 0.472 in)

 

lock washer 1 pc. (thru-beam type: 2 pcs.)

 

toothed lock washer 1 pc.

 

screws with washers 2 pcs. and nuts 2 pcs.

 

FD-G6X: FX-CT2 (fiber cutter) 1 pc.

 

 

 

 

 

 

 

 

 

 

Notes: 1) Sleeve part cannot be bent.

2)The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.

 

 

Type

Item

Model No.

Allowable bending radius

Ambient temperature

Ambient humidity

 

Material

Fiber core

 

Sheath

 

 

Fiber head

 

 

 

Accessories (Note 2)

 

 

 

 

Special use

Liquid level sensing

FD-F8Y

 

FD-F4 /F9

Protective tube: R40 mm R1.575 in or more

 

R10 mm R0.394 in or more

Fiber: R15 mm R0.591 in or more

 

 

 

40 to 125 °C 40 to 257 °F (Note 1)

 

40 to 100 °C 40 to 212 °F (Note 1)

35 to 85 %RH (No dew condensation or icing allowed)

Polycarbonate

Polypropylene

Polyethylene

 

Polyetherimide

(Protective tube: Fluorine resin)

(Lens: Polycarbonate)

 

1 fiber attachment set

1 fiber attachment set, FX-CT2 (fiber cutter) 1pc.

FX-CT2 (fiber cutter) 1 pc.

Tying bands 4 pcs., anti-slip tubes 2 pcs.

 

 

Notes: 1) With the liquid sensing fiber, make sure that the temperature of the liquid is also within the ambient temperature range.

2)The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.

 

 

 

 

 

 

Environment resistant

 

 

Type

 

Heat-resistant

 

 

Chemical-resistant

Vacuum

Item

350 °C 662 °F type

300°C 572°F type

200°C 392°F type

180°C 356°F type

130°C 266°F type

 

 

Allowable bending radius

 

R25 mm R0.984 in or more

 

R30 mm R1.181 in or more

R200 mm R7.874 in or more

(FT-H20W- : R10 mm R0.394 in or more, Sleeve of a head with sleeve: R10 mm R0.394 in or more)

(FT-Z802Y: R25 mm R0.984 in or more)

(FT-60V: R30 mm R1.181 in or more)

 

 

 

 

60 to 350 °C

60 to 300 °C

60 to 200 °C

 

60 to 180 °C

60 to 130 °C

40 to 115 °C

40 to 120 °C

Ambient temperature

76 to 662 °F

76 to 572 °F

76 to 392 °F

 

76 to 356 °F

 

 

(Note 1, 2)

(Note 1, 2, 3)

(Note 2)

 

(Note 2, 4)

76 to 266 °F

40 to 239 °F

40 to 248 °F

 

 

 

 

(FT-Z802Y: 0 to 60 °C 14 to 140 °F)

 

Ambient humidity

 

 

35 to 85 %RH (No dew condensation or icing allowed)

 

 

Fiber core

Multi-component glass (Note 3)

 

Silicone

 

Acrylic

Quartz glass (Note 3)

 

 

 

 

Silicone

 

 

 

 

 

 

 

 

 

Inside stainless steel

 

 

 

 

 

Material

 

 

 

(SUS) spiral tube

 

 

 

 

 

Sheath

 

 

FD-H20-21:

 

Fluorine resin

 

Fluorine resin

 

Stainless steel (SUS)

Stainless steel (sus)

 

 

 

Protective tube: Fluorine resin

 

 

FT-H20W- :

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fluorine resin

 

 

 

Sheath: Polypropylene

 

 

Fiber head

 

 

Brass (Nickel plated)

 

Stainless steel (SUS)

Brass (Nickel plated)

(Sheath of FT-Z802Y: Fluorine resin)

Aluminum

 

 

 

 

 

 

 

 

 

FD-H20-21:Stainless steel (sus)

 

 

 

 

 

 

 

FT-H20W- , FD-H18-L31 and FT-H13-FM2: 1 fiber attachment set

 

Nuts 2 pcs. (thru-beam type: 4

Accessories (Note 5)

Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc.

 

1 fiber attachment set

pcs.) and toothed lock washer

 

 

Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1 pc. (thru-beam type: 2 pcs.)

FX-CT2 (fiber cutter) 1 pc.

1 pc. (thru-beam type: 2 pcs.)

Notes: 1) If the fiber is used below 30 °C 22 °F, its maximum resistable temperature drops to 200° C 392 °F. If the side-view lens FX-SV1 is put on the fiber head, the allowable maximum temperature drops to 300 °C 572 °F. (The ambient temperature range of FX-SV1 is from 60 to 300 °C 76 to 572 °F.)

2)The ambient temperature of heat-resistant 350 °C 662 °F type, 300 °C 572 °F type, 200 °C 392 °F type and 180 °C 356 °F type fibers are the value in dry condition. In humid environment, the ambient temperature differs. (For a high humidity of 85 %RH, the ambient temperature is 0 to 40 °C 14 to 104 °F.)

3)If the fiber material is quartz glass or multi-component glass, keep it away from vibration or impact.

4)The normal temperature for continuous usage or storage should be 60 to 150 °C 76 to 302 °F.

5)The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.

08/2005

85

 

FX-301

I/O CIRCUIT AND WIRING DIAGRAMS

NPN output type

I/O circuit diagram

Wiring diagram

Note: The quick-connection sub cable does not have brown lead wire and blue lead wire.

Terminal arrangement diagram

Notes: 1) The quick-connection sub cable does not have V (brown) and 0 V (blue). Notes: 2) 50 mA max., if five amplifiers, or more, are connected together.

Symbols … D : Reverse supply polarity protection diode

ZD: Surge absorption zener diode

Tr : NPN output transistor

PNP output type

I/O circuit diagram

Wiring diagram

Note: The quick-connection sub cable does not have brown lead wire and blue lead wire.

Terminal arrangement diagram

Notes: 1) The quick-connection sub cable does not have V (brown) and 0 V (blue). Notes: 2) 50 mA max., if five amplifiers, or more, are connected together.

Symbols … D : Reverse supply polarity protection diode

ZD: Surge absorption zener diode

Tr : PNP output transistor

86

08/2005

 

Panasonic FX-301 User Manual

FX-301

SENSING CHARACTERISTICS (TYPICAL)

Parallel deviation

FT-FM10L Thru-beam type FT-SFM2L Thru-beam type

FT-B8

Thru-beam type

FT-NB8

Thru-beam type

FT-FM2 FT-FM2S FT-FM2S4

Thru-beam type

FT-T80 FT-SFM2

FT-N8

Thru-beam type

FT-NFM2 FT-NFM2S

Thru-beam type

FT-NFM2S4 FT-SNFM2

 

 

 

FT-R80

Thru-beam type

L

 

 

FT-V10

 

Thru-beam type

 

FT-SFM2SV2

Thru-beam type

Horizontal direction

 

 

 

 

 

Vertical direction

 

Horizontal direction

 

 

 

Vertical direction

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FT-V22

Thru-beam type

FT-V41

Thru-beam type

Horizontal direction

Vertical direction

Horizontal direction

Vertical direction

08/2005

87

 

Loading...
+ 46 hidden pages