Panasonic ES8243A, ES8243 User Manual

Operating Instructions

Manuel d’utilisation

Rechargeable Shaver

Rasoir rechargeable

Model No. ES8243

N° de modèle ES8243

English	2
Français	8
Español	14

Before operating this unit, please read these instructions completely.

Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil.

English

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

Read all instructions before using this appliance.

DANGER Toshock:reduce the risk of electric

1.Do not reach for an appliance that has fallen into water. Unplug immediately.

2.Charger unit is not for immersion or for use in shower.

3.Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.

4.Except when charging, always unplug this appliance from the electrical outlet immediately after using.

5.Unplug this appliance before cleaning.

6.Do not use an extension cord with this appliance.

WARNING To reduce the risk of burns, fire, electric shock, or injury to persons:

1.Close supervision is necessary when this appliance is used by, on, or near children or invalids.

2.Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

3.Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.

4.Keep the cord away from heated surfaces.

5.Never drop or insert any object into any opening.

6.Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

7.Do not use this appliance with damaged shaving blades and/or foil, as facial injury may occur.

8.Always attach plug to appliance first, then to outlet. To disconnect, turn all controls to “off” then remove plug from outlet.

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

Power source: 100-240 V AC, 50-60 Hz (Automatic voltage conversion)

Motor voltage: 3.6 V DC Charging time: 1 hour

This product is intended for household use only.

Important

Before use

This Wet/Dry shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water. The following is the symbol of Wet shaver. The symbol means that the hand-held part may be used in a bath or shower.

Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic Wet/Dry shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method.

Using the shaver

Caution - The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil etc. is damaged as you will cut your skin.

Charging the shaver

Do not use any power cord or AC adaptor other than one specifically designed for this model. Plug in the adaptor into a household outlet where there is no moisture and handle it with dry hands. The shaver may become warm during use and charging. However, this is not a malfunction. Do not charge the shaver where it will be exposed to direct sunlight or other heat sources. Hold the adaptor when disconnecting it from the household outlet. If you tug on the power cord, you may damage it. Contact an authorized service center if the power cord gets damaged.

Adequate ambient temperature for charging is 15-35 °C (5995 °F).

If the indicators on the LCD panel do not glow, wait for a short while until it glows.

The adaptor is intended to be correctly oriented in a vertical or floor mount position.

Cleaning the shaver

Warning - Disconnect the power cord from the shaver before cleaning it to prevent electric shock.

Keep both the inner blades inserted. If only one of the inner blades is inserted, the shaver may be damaged. If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Wipe it with a cloth dampened with soapy water. Do not use thinner, benzine or alcohol.

Storing the shaver

Disconnect the power cord when storing the shaver. Do not bend the power cord or wrap it around the shaver. Do not leave this shaver within the reach of small children. Keep these operating instructions in a safe place.

English

English

Parts identification

Protective cap	6 Pivot action	Trimmer handle
System outer foil	selector	Adaptor (RE7 40)
3 Inner blades	7 OFF/ON switch	Power cord
4 System outer foil	8 LCD panel	Appliance plug
release buttons	9 Appliance socket
5 Finger rest	Trimmer

Charge	Charging

1 Insert the appliance plug into the shaver.

2 Plug in the adaptor into a household outlet.

• The indicators on the LCD panel glow and charging starts.

• Charging is completed when the indicators on the LCD panel blink. (Max. 1 hour later)

•If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration.

Reading the LCD panel

The LCD panel shows the remaining battery capacity from 0% to 100%, in 10% increments.

				After charging is			10 minutes after
	While charging						charging is
				completed
							completed

Shave	Using the shaver

90˚

English

The indicators

The indicators

The indicators blink

blink once every

once every 2

glow.

second.

seconds.

During use

After use

min.used

min.used

The used time is shown.

The used time and the

remaining battery capacity

• The shown time returns to

are shown alternately after

[0’00”] after 10 minutes.

turning off the shaver.

When the battery capacity is low

• You can shave 1 to 2 times after “10%” appears.

(This will differ depending on usage.)

“10%” appears and blinks.

•A full charge will supply enough power for approx. 14 shaves of 3 minutes each.

1 Press the OFF/ON 2 Hold the shaver as switch. illustrated above and

shave.

•Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.

Pivot action selector
Use to select “SOFT” (soft) or “LOCK” (lock).	SOFT
You can change the pivot action whether the
shaver is turned on or off.	LOCK

Using the trimmer

Slide the trimmer handle up. Place at a right angle to your skin and move downwards to trim your sideburns.

English

Clean

Cleaning

We recommend that you clean your shaver with the “sonic” vibration turbo-cleaning mode when the faucet symbol appears on the LCD panel.

1. Disconnect the power cord from the shaver.

2. Apply some hand soap and some water to the outer foil.

3. Press the OFF/ON switch for more than 2 seconds to activate the turbo mode for “sonic” vibration cleaning.

• appears on the LCD panel.

• After about 20 seconds, it will be automatically turned off, or you can turn it off by pressing the OFF/ON switch.

4. Remove the system outer foil and press the OFF/ON switch for more than 2 seconds to activate the turbo mode for “sonic” vibration cleaning and clean it with running water.

5. Wipe off any drops of water with a dry cloth.

6. Remove the system outer foil to allow it to dry completely.

Caution for turbo mode

•Shaving in turbo mode may damage your skin. Turn the shaver off and then on again to cancel turbo mode.

•Do not place your fingers on the OFF/ON switch while using the shaver. This may cause the shaver to turn off or enter turbo mode. Place your fingers on the finger rest while using the shaver.