Panasonic 42HL57, 26HL57, 32HL57, 37HL57 User Manual

0 (0)

LCD Color Television

26HL57

32HL57

37HL57

42HL57

For an overview of steps for setting up your new TV, see page 7.

A high definition tuner and programming are required to view High Definition TV broadcasts. Please contact your cable or satellite provider.

Owner’s Record

The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.

Model number: Serial number:

© 2007 TOSHIBA CORPORATION

YC/M VX1A00043600

All Rights Reserved

 

Dear Customer,

Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and keep it nearby for future reference.

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See item 20 on page 3.

WARNING: If you decide to wall mount this television, always use a UL Listed wall bracket appropriate for the size and weight of this television. The use of any wall bracket other than a UL Listed wall bracket appropriate for the size and weight of this television for wall mounting this television could result in serious bodily injury and/or property damage. See “Removing the Pedestal Stand” (- page 5).

Child Safety

It Makes A Difference

Where Your TV Stands

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

aIf you are like most consumers, you have a TV in your home. Many homes, in fact, have more than one TV.

aThe home theater entertainment experience is a growing trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.

aSometimes TVs are improperly secured or inappropriately situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over,

causing unnecessary injury.

Toshiba Cares!

a The consumer electronics industry is committed to

making home entertainment enjoyable and safe.

aThe Consumer Electronics Association formed the Home Entertainment Support Safety Committee,

comprised of TV and consumer electronics furniture manufacturers, to advocate children’s safety and

educate consumers and their families about television safety.

Tune Into Safety

a One size does NOT fit all! Use appropriate furniture large enough to support the weight of your TV (and other electronic components).

aUse appropriate angle braces, straps, and anchors to secure your furniture to the wall (but never screw anything directly into the TV).

aCarefully read and understand the other enclosed instructions for proper use of this product.

aDo not allow children to climb on or play with furniture and TVs.

aAvoid placing any item on top of your TV (such as a VCR, remote control, or toy) that a curious child may reach for.

aRemember that children can become excited while watching a program and can potentially push or pull a TV over.

aShare our safety message about this hidden hazard of the home with your family and friends. Thank you!

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. www.CE.org

CEA is the Sponsor, Producer and Manager of the International CES®

2

Wide blade

Important Safety Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of

the polarized or grounding type plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades

and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Precautions

14a) CAUTION: If the TV is dropped and the cabinet or enclosure surface has been damaged or the TV does not operate normally, take the following precautions:

ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or fire.

NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic liquid. If the liquid comes in contact with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and consult your doctor.

ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped.

15)CAUTION:

To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

To prevent electric shock, match wide blade of plug to wide slot; fully insert.

16)WARNING:

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

Installation, Care, and Service

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

17)Never modify this equipment. Changes or modifications may void the warranty.

18)DANGER: RISK OF

SERIOUS PERSONAL INJURY, DEATH, OR

EQUIPMENT DAMAGE!

Never place the TV on an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

19)To avoid damage to this product, never place or store the TV in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.

20)Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy tie from the hooks on the rear of the TV pedestal to a wall, pillar, or other immovable structure. Make sure the tie is tight, secure, and parallel to the floor.

Sturdy tie (as short as possible)

4"

 

 

min.

Hooks

Clip

Clip

 

 

TV side

 

TV top

21)The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

22)Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

• on a bed, sofa, rug, or similar surface;

• too close to drapes, curtains, or walls; or

• in a confined space such as a bookcase, built-in cabinet, or any other place with poor

ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV. Leave a space of at least 4 (four) inches around the TV.

(continued)

3

23)Always place the back of the television at least four (4) inches away from any vertical surface (such as a wall) to allow proper ventilation.

24)Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

25)Never overload wall outlets and extension cords.

26)Always operate this equipment from a 120 VAC, 60 Hz power source only.

27)Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

Ground clamp

Electric service equipment

Ground clamps

Antenna lead-in wire

Antenna discharge unit (NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Power service grounding

electrode system (NEC Art 250 Part-H)

28)

DANGER: RISK OF SERIOUS

PERSONAL INJURY OR DEATH!

Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.

Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

29)If you use the TV in a room whose temperature is 32 ºF (0 ºC) or below, the picture brightness may vary until the LCD warms up. This is not a sign of malfunction.

30) Always unplug the TV before cleaning. Gently wipe the display panel surface (the TV screen) using a dry, soft cloth only (cotton, flannel, etc.). A hard cloth may damage the

surface of the panel. Avoid

contact with alcohol, thinner, benzene, acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage the surface. Never spray volatile compounds such as insecticide on the cabinet. Such products may damage or discolor the cabinet.

31)

WARNING:

RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind into the TV cabinet slots.

32)While it is thundering, do not touch the connecting cables or apparatus.

33)For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

34)During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.

35)

WARNING: RISK OF

 

SERIOUS PERSONAL

 

INJURY OR EQUIPMENT

 

DAMAGE!

Never strike the screen with a sharp or heavy object.

36)• The LCD screen of this product can be damaged by ultraviolet radiation from the sun. When selecting a location for the television, avoid locations where the screen may be exposed to direct sunlight, such as in front of a window.

Never touch, press, or place anything on the LCD screen. These actions will damage the LCD screen. If you need to clean the LCD screen, follow the instructions in item 30 on this page.

Service

37)

WARNING:

RISK OF ELECTRIC SHOCK!

Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Center.

38)If you have the TV serviced:

Ask the service technician to use only replacement parts specified by the manufacturer.

Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

39)The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury.

When the TV reaches the end of its useful life, dispose of the used TV by the approved method for your area, or ask a qualified service technician to properly dispose of the TV.

4

Choosing a location for your LCD TV

To Display your LCD TV on the included Pedestal Stand:

Observe the following safety precautions:

1)Read and Follow the pedestal assembly instructions included with the pedestal.

CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble pedestal as indicated below.

Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.

2)Place the TV on a sturdy, level surface that can support the weight of the TV.

3)Be sure to secure the TV to a wall, pillar, surface, or other

immovable structure. To secure the TV in this manner, use the included strap located at the rear of the pedestal stand. (-item 20, page 3).

To Display your LCD TV using a Wall Bracket:

If you decide to wall mount your LCD TV, always use a ULlisted wall bracket appropriate for the size and weight of the LCD TV (- page 2) :

1)CAUTION: Two people are required for installation.

2)Unplug and remove any cables and/or other component connectors from the rear of the TV.

3)Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

4)After attaching the appropriate bracket(s) to the wall and the back of the TV, remove the pedestal stand from the TV as described below.

Removing the Pedestal Stand

1)Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2)Remove the jack pack cover on the back of the TV to expose the pedestal stand screws. The jack pack cover can be removed without tools.

3)Remove the five screws shown in the diagram below. This will allow removal of the pedestal stand.

4)Once you have removed all five screws holding the pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV.

Five screws

Important notes about your LCD TV

The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms.

1)An afterimage (ghost) may appear on the screen if a fixed, nonmoving image is displayed for a long period of time. The afterimage is not permanent and will disappear in a short period of time.

2)The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance.

Note: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work with this TV.

Trademark Information

WOW, SRS and l symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

5

Contents

Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Welcome to Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features of your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Overview of steps for installing, setting up, and

using your new TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 TV front and side panel controls and connections . . . . . . . . . 8 TV back panel connections. . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 2: Connecting your TV . . . . . . . . . . . . . . . . . . . . . . .10

Overview of cable types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the connection illustrations . . . . . . . . . . . . . . . . . . . . 10 Connecting an antenna or cable TV . . . . . . . . . . . . . . . . . . . 10 Connecting a VCR and antenna or Cable TV

(no Cable box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Connecting a VCR with S-video and a cable box . . . . . . . . 12 Connecting a DVD player with ColorStream® (component

video), a VCR, and a satellite receiver. . . . . . . . . . . . . . 13 Connecting a camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connecting an audio system . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connecting an HDMIor DVI device to the HDMI

input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Connecting a personal computer (PC) . . . . . . . . . . . . . . . . . 16

Chapter 3: Using the remote control . . . . . . . . . . . . . . . . . . .17

Preparing the remote control for use. . . . . . . . . . . . . . . . . . . 17 Installing the remote control batteries . . . . . . . . . . . . . . . . . 17 Remote control effective range. . . . . . . . . . . . . . . . . . . . . . . 17 Learning about the remote control . . . . . . . . . . . . . . . . . . . . 18 Using the remote control to operate your other devices . . . . 19 Remote Control functional key chart . . . . . . . . . . . . . . . . . . 20 Programming the remote control

to operate your other devices . . . . . . . . . . . . . . . . . . . . . 21 Remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Chapter 4: Menu layout and navigation . . . . . . . . . . . . . . . . .24

Menu Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Navigating the menu system. . . . . . . . . . . . . . . . . . . . . . . . . 25

Chapter 5: Setting up your TV. . . . . . . . . . . . . . . . . . . . . . . .26

Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . 26 Programming channels into the TV’s channel memory . . . . 26 Programming channels automatically . . . . . . . . . . . . . . 26

Manually adding and deleting channels

in the channel memory . . . . . . . . . . . . . . . . . . . . . . 27 Programming your favorite channels . . . . . . . . . . . . . . . . . . 27 Labeling channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Setting the HDMIaudio mode . . . . . . . . . . . . . . . . . . . . . . 29

Chapter 6: Using the TV’s features . . . . . . . . . . . . . . . . . . . .30

Selecting the video input source to view . . . . . . . . . . . . . . . 30 Labeling the video input sources . . . . . . . . . . . . . . . . . . . . . 30 Tuning channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Tuning your favorite channels . . . . . . . . . . . . . . . . . . . . 31 Tuning to the next programmed channel . . . . . . . . . . . . 31

Tuning to a specific channel (programmed or unprogrammed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Tuning to a specific programmed channel

(or video mode) using the Program list . . . . . . . . . . 31 Switching between two channels using Channel

Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Selecting the picture size . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Adjusting the Picture Position . . . . . . . . . . . . . . . . . . . . . . . 33 Using the auto aspect ratio feature . . . . . . . . . . . . . . . . . . . . 33 Using the blue screen function . . . . . . . . . . . . . . . . . . . . . . . 34 Selecting the gray level for 4:3 mode side panels . . . . . . . . 34 Selecting the cinema mode (480i signals only) . . . . . . . . . . 34

Adjusting the picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Selecting the picture mode . . . . . . . . . . . . . . . . . . . . . . . 35 Adjusting the picture quality . . . . . . . . . . . . . . . . . . . . . 35 Using the black stretch feature. . . . . . . . . . . . . . . . . . . . 36 Using MPEG noise reduction. . . . . . . . . . . . . . . . . . . . . 36 Using CableClear®/DNR (digital noise reduction) . . . . 36 Selecting the color temperature . . . . . . . . . . . . . . . . . . . 37

Using the closed caption mode . . . . . . . . . . . . . . . . . . . . . . . 37 Closed Caption Reception Adjustment . . . . . . . . . . . . . 38 Adjusting the audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Muting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Selecting stereo/SAP broadcasts . . . . . . . . . . . . . . . . . . 38 Adjusting the audio quality . . . . . . . . . . . . . . . . . . . . . . 39 Using the SRS WOWsurround sound feature . . . . . . 39 Using the StableSound® feature. . . . . . . . . . . . . . . . . . . 40 Using the Locks menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Entering the PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . 40 If you cannot remember your PIN code. . . . . . . . . . . . . 40 Changing your PIN code . . . . . . . . . . . . . . . . . . . . . . . . 41 Locking channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Using the Video lock feature . . . . . . . . . . . . . . . . . . . . . 41

Using the PC settings feature . . . . . . . . . . . . . . . . . . . . . . . . 42 Setting the PC Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Setting the sleep timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Setting the On timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Displaying TV setting information on-screen using

RECALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Understanding the auto power off feature . . . . . . . . . . . . . . 44 Understanding the last mode memory feature . . . . . . . . . . . 44

Chapter 7: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 45

General troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Chapter 8: Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Limited Canadian Warranty for Toshiba Brand Flat Panel

Televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

6

For help, refer to the Troubleshooting section (- Chapter 7).

Chapter 1: Introduction

Welcome to Toshiba

Thank you for purchasing this Toshiba TV, one of the most innovative LCD TVs on the market.

This manual applies to models 26HL57, 32HL57, 37HL57, and 42HL57. The model and serial numbers are on the back of your TV. Write these numbers in the space provided on the front cover of this manual for your records.

Instructions in this manual are based on using the remote control. You can also use the controls on the TV if they have the same name as those on the remote control.

Please read all the safety and operating instructions carefully, and keep the manual for future reference.

Features of your new TV

The following are just a few of the many exciting features of your new Toshiba widescreen LCD TV:

Two sets of ColorStream® HD high-resolution component video inputs (- pages 9 and 13).

Two HDMIdigital, high-definition multimedia interfaces (- pages 9 and 15).

SRS WOWaudio technologies (- page 39).

CableClear® DNR digital picture noise reduction (- page 36).

PC IN (Analog RGB) computer input (- pages 9 and 16).

Overview of steps for installing, setting up, and using your new TV

Follow these steps to set up your TV and begin using its many exciting features.

1 Carefully read the important safety, installation, care, and service information (-pages 2–4). Keep this manual for future reference.

2 Observe the following when choosing a location for the TV:

Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure (- page 3).

Place the TV in a location where light does not reflect on the screen.

Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY.

3 Do not plug in any power cords until AFTER you have connected all cables and devices to your TV.

4 BEFORE connecting cables or devices to the TV, learn the functions of the TV’s connections and controls (- pages 8–9).

5 Connect your other electronic device(s) to the TV (- pages 10–16).

6 Install the batteries in the remote control (- page 17).

7 See “Learning about the remote control” (-page 18) for an overview of the buttons on the remote control.

8 Programming the remote control to operate your other device(s) (- pages 19–23).

9 AFTER connecting all cables and devices, plug in the power cords for your TV and other devices.

Press POWER on the TV control panel or remote control to turn on the TV.

10 See “Menu layout and navigation” for a quick overview of the TV’s menu system (- page 24).

11 Program channels into the TV’s channel memory (- page 26).

12 For details on using the TV’s features, see Chapter 6.

13

14 For technical specifications and warranty information, see Chapter 8.

15 Enjoy your new TV!

7

Chapter 1: Introduction

TV front and side panel controls and connections

TV top

TV front

Right side panel

POWER

4

6

5 7

8

9

Control panel

3

1 2

1Green LED — Green light indicates power is on.

2Remote sensor — Point the remote control toward the remote sensor. See “Remote control effective range” (- page 17).

3VIDEO-2 IN — The side panel A/V connections are referred to as “VIDEO 2” and include standard A/V inputs plus an optional S-video input.

Note: Standard (composite) video and S-video cables carry only video information; separate audio cables are required for a complete connection.

4POWER — Press to turn the TV on and off.

5ARROWS BbC c — When a menu is on-screen, these buttons function as up/down/left/right menu navigation buttons.

6CHANNEL Bb — When no menu is on-screen, these buttons change the channel (programmed channels only; - page 26).

7VOLUME C c — When no menu is on-screen, these buttons adjust the volume level.

8MENU — Press to access the menu system (- page 24).

9INPUT (ENTER) — Repeatedly press to change the source you are viewing (Video1/ColorStream HD1,

Video2, ColorStream HD2, HDMI1, HDMI2, PC, or antenna/cable channel).

When a menu is on-screen, the INPUT button on the TV’s control panel functions as the ENTER button.

8

Chapter 1: Introduction

TV back panel connections

For an explanation of cable types and connections, see Chapter 2 (- page 10).

 

1

2

TV back

 

Power cord

 

Cable Clamper

3

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

6

7

 

 

 

 

 

 

1ColorStream® HD-1 and ColorStream® HD-2

Two sets of ColorStream® high-definition component video inputs (with standard analog audio inputs) for connecting devices with component video output, such as a Toshiba DVD player with ColorStream®.

Note: Component video cables carry only video information; separate audio cables are required for a complete connection.

2Fixed Audio OUT — Analog audio outputs for connecting an audio amplifier.

3PC/HDMI-1 (AUDIO) IN — PC audio input terminals are shared with HDMI1 analog audio input terminals, and their use can be configured in the Set Up menu

(- page 42).

4VIDEO-1 IN — Standard (composite) video and standard (analog) audio inputs for connecting devices with composite video output.

Note: VIDEO-1 input terminals are shared with ColorStream HD-1 input terminals. When component video cables are connected to the ColorStream HD-1 terminals and ColorStream HD-1 is the current input mode, the VIDEO-1 input terminals will not carry any signals.

5ANT — Antenna input that supports analog (NTSC) antenna signals and analog cable TV signals.

6PC IN — For use when connecting a personal computer (- page 16).

7HDMIIN — High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device, or uncompressed digital video from a DVI device (- item 3, at left; also - page 15).

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

9

Chapter 2: Connecting your TV

Overview of cable types

Cables can be purchased from most stores that sell audio/video devices. Before purchasing any cables, be sure of connector types required by your devices and the length of each cable.

Coaxial (F-type) cable

Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT input on your TV.

Standard A/V cables (red/white/yellow)

Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with analog audio and composite video output. These cables (and the related inputs on your TV) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio.

S-video cable

S-video cable is for use with video devices with S-video output. Separate audio cables are required for a complete connection.

Note: An S-video cable provides better picture performance than a composite video cable. If you connect an S-video cable, be sure to disconnect the standard (composite) video cable or the picture performance will be unacceptable.

Component video cables (red/green/blue)

Component video cables come in sets of three and are for use with video devices with component video output. (ColorStream® is Toshiba’s brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.

Note: Component video cables provide better picture performance than a standard (composite) video or S-video cable.

HDMIcable

HDMI (High-Definition Multimedia Interface) cable is for use with devices with an HDMI output. An HDMI cable delivers digital audio and video in its native format. This cable carries both video and audio information; therefore, separate audio cables are not required for a complete HDMI device connection (- page 15).

Note: HDMI cable provides better picture performance than a standard (composite) video or S-video cable.

Analog RGB (15-pin) computer cable

Analog RGB (15-pin) computer cable is for connecting a PC to the TV’s PC IN terminal (- page 16).

About the connection illustrations

You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s owner’s manual.

Connecting an antenna or cable TV

This connection allows you to watch TV programs or basic cable channels.

From antenna or cable

TV lower back panel

10

Chapter 2: Connecting your TV

Connecting a VCR and antenna or Cable TV (no Cable box)

TV upper back panel

From Cable TV or antenna

Stereo VCR

VIDEO

AUDIO

 

 

L

R

 

 

 

 

IN

IN from ANT

 

 

 

CH 3

 

 

 

CH 4

 

 

OUT

OUT to TV

 

 

 

 

L

R

 

TV lower back panel

You will need:

coaxial cables

standard A/V cables

For better picture performance, if your VCR has S-video, connect an S-video cable and standard (analog) audio cables to the VIDEO-2 inputs on the side panel (instead of the VIDEO-1 inputs). Do not connect both types of video cable to VIDEO-2 at the same time or the picture performance will be unacceptable.

If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only.

To view the antenna or Cable signal:

Select the ANT video input source on the TV.*

To view the VCR:

Turn ON the VCR. Select the Video1 video input source on the TV.*

*To select the video input source, press INPUT on the remote control (- page 30). To program the TV remote control to operate other devices, see Chapter 3.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

11

Chapter 2: Connecting your TV

Connecting a VCR with S-video and a cable box

An S-video connection will provide better picture performance than a standard (composite) video cable.

TV right side panel

 

 

From Cable TV

 

Cable box

 

IN

CH 3

 

 

 

CH 4

OUT

 

 

 

Stereo VCR

 

 

 

VIDEO

AUDIO

 

 

L

R

 

 

 

IN

CH 3

IN from ANT

 

 

 

 

 

CH 4

 

 

OUT

 

OUT to TV

 

 

 

 

L R

 

 

TV lower back panel

You will need:

coaxial cables

S-video cable

Do not connect both types of video cable to VIDEO-2 at the same time or the picture performance will be unacceptable.

standard audio cables

If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only.

Note: When you use a Cable box, you may not be able to use the remote control to program or access certain features on the TV.

To view basic and premium Cable channels:

Turn OFF the VCR. Select the ANT video input source on the TV.* Tune the TV to channel 3 or 4 (whichever channel the Cable box output is set to). Use the Cable box controls to change channels.

To view the VCR:

Turn ON the VCR. Select the Video2 video input source on the TV.*

*To select the video input source, press INPUT on the remote control (- page 30). To program the TV remote control to operate other devices, see Chapter 3.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

12

Panasonic 42HL57, 26HL57, 32HL57, 37HL57 User Manual

Chapter 2: Connecting your TV

Connecting a DVD player with ColorStream® (component video), a VCR, and a satellite receiver

Your TV has two sets of ColorStream® (component video) inputs.

TV upper back panel

From antenna

 

 

 

 

TV right side panel

Stereo VCR

 

 

 

 

 

 

 

 

VIDEO

AUDIO

 

 

 

 

 

 

 

L

R

 

 

 

 

 

 

 

 

 

IN

IN from ANT

 

 

 

 

AUDIO

 

 

 

CH 3

 

 

 

 

OUT

 

 

 

CH 4

Y

PB

PR

 

L

 

 

OUT

 

 

 

 

 

OUT to TV

 

 

 

 

 

 

 

 

 

COMPONENT VIDEO S-VIDEO VIDEO

R

 

L

R

 

 

 

 

 

 

 

 

OUT

OUT

 

 

 

 

 

DVD player with component video

 

 

 

 

 

From satellite dish

 

 

 

 

 

 

 

 

 

 

TV lower back panel

 

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

OUT

 

 

 

 

Y

PB

PR

 

L

 

 

 

 

Satellite

COMPONENT VIDEO S-VIDEO

VIDEO

R

 

 

 

 

IN

OUT OUT

 

 

 

 

 

 

 

 

 

Satellite receiver with component video

You will need:

coaxial cables

standard A/V cables

For better picture performance, if your VCR has S-video, connect an S-video cable and standard (analog) audio cables to the VIDEO-2 inputs on the side panel (instead of the VIDEO-1 inputs). Do not connect both types of video cable to VIDEO-2 at the same time or the picture performance will be unacceptable.

If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only.

standard audio cables

component video cables

You can connect the component video cables (plus audio cables) from the DVD player or satellite receiver to either set of ColorStream terminals on the TV (HD-1 or HD-2). The ColorStream HD-1 and HD-2 terminals can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance.

If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to VIDEO-1. If your DVD player has HDMI video, see page 15.

To view antenna or Cable channels:

Select the ANT video input source on the TV.*

To view the DVD player:

Turn ON the DVD player. Select the ColorStream HD2 video input source on the TV.*

To view satellite programs using the component video connections:

Turn on the satellite receiver. Select the ColorStream HD1 video input source on the TV.*

To view the VCR or view and record antenna channels:

Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the Video2 video input source on the TV.*

To record a TV program while watching a DVD:

Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD2 video input source on the TV* to view the DVD.

*To select the video input source, press INPUT on the remote control (- page 30). To program the TV remote control to operate other devices, see Chapter 3.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

13

Chapter 2: Connecting your TV

Connecting a camcorder

You will need:

standard A/V cables

For better picture performance, if your camcorder has S-video, connect an S-video cable (plus the audio cables) to VIDEO-2 on the TV right side panel.

Camcorder

VIDEO AUDIO

OUT

L

R

VIDEO-2 inputs on TV right side panel

To view the camcorder video:

Select the Video2 video input source on the TV.*

*To select the video input source, press INPUT on the remote control (- page 30). To program the TV remote control to operate other devices, see Chapter 3.

Connecting an audio system

This connection allows you to use external speakers with an external analog audio amplifier to adjust the sound level.

You will need:

standard audio cables

Analog audio amplifier

LINE IN

L

R

TV upper back panel

To control the audio:

1 Turn on the TV and the stereo amplifier.

2 Minimize the sound volume from the TV’s built-in speakers and control the volume level using the amplifier’s remote control.

14

Chapter 2: Connecting your TV

Connecting an HDMIor DVI device to the HDMI input

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-861B–compliant[1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

The following signal formats can be displayed:

Format

Resolution

V. Frequency

VGA

640 × 480

59.94/60Hz

 

 

 

480i (60Hz)

720 × 480

59.94/60Hz

 

 

 

480p (60Hz)

720 × 480

59.94/60Hz

 

 

 

 

720p (60Hz)

1280

× 720

59.94/60Hz

 

 

 

 

1080i (60Hz)

1920

× 1080

59.94/60Hz

 

 

 

 

1080p (24/60Hz)

1920

× 1080

59.94/60Hz

 

 

 

 

Note: To connect a PC to the HDMI input, see page 16.

To connect an HDMI device, you will need:

one HDMI cable (type A connector) per HDMI device

For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo (). You should use an HDMI cable shorter than 16.4 ft (5m) for 1080p input signals.

HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration).

See “Setting the HDMIaudio mode” on page 29.

TV lower back panel

HDMI device

VIDEO

AUDIO

HDMI OUT

L

R

 

IN IN

OUT

L R

To view the HDMI device video:

Select the HDMI1 or HDMI2 video input source on the TV.*

Note: If the audio output mode of the HDMI device is other than the PCM mode, the TV speakers will not output sound.

*To select the video input source, press INPUT on the remote control (- page 30). To program the TV remote control to operate other devices, see Chapter 3.

To connect a DVI device, you will need:

one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device

For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

one pair of standard analog audio cables per DVI device

An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).

See “Setting the HDMIaudio mode” on page 29.

TV upper back panel

 

 

 

 

 

 

 

 

 

 

 

TV lower back panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVI device

VIDEO

AUDIO

DVI/HDCP

L

R

OUT

 

IN IN

 

 

OUT

L

R

Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

[1]EIA/CEA-861-861B compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of highdefinition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

15

Chapter 2: Connecting your TV

Connecting a personal computer (PC)

With either the PC IN or HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers.

To connect a PC to the PC IN terminal on the TV:

When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable.

TV upper back panel

TV lower back panel

PC audio

output

Computer

PC audio

cable

Conversion adapter (if necessary)

To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The following signals can be displayed:

Format

Resolution

V. Frequency

VGA

640 × 480

60Hz/75Hz

 

 

 

SVGA

800 × 600

60Hz/75Hz

 

 

 

 

XGA

1024

× 768

60Hz/70Hz/75Hz

 

 

 

 

WXGA

1280

× 768

60Hz/75Hz

 

 

 

 

WXGA

1360

× 768

60Hz

 

 

 

 

SXGA

1280

× 1024

60Hz/75Hz

 

 

 

 

Other formats or non-standard signals will not be displayed correctly.

To display the optimum picture, use the PC setting feature (-“Using the PC settings feature” on page 42).

Note:

The PC audio input terminals on the TV are shared with the HDMI-1 analog audio input terminals (- page 42).

Some PC models cannot be connected to this TV.

An adapter is not needed for computers with a compatible mini D-sub15-pin terminal.

Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

These signal formats are converted to match the number of pixels of the LCD panel.

Therefore, the TV may not display small text properly.

If you connect this TV to your PC, the compressed image is displayed in SXGA mode, therefore the picture quality may deteriorate and characters may not be read.

A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured depending on some signals. This is not the malfunction.

To connect a PC to the HDMI terminal on the TV:

When connecting a PC to the HDMI terminal on the TV, use an HDMI-to DVI adapter cable and analog audio cables.

If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analog cables are not necessary (-page 15).

TV upper back panel

TV lower back panel

PC audio

cable

PC audio

output

Computer

The following signal formats can be displayed:

Format

Resolution

V. Frequency

VGA

640 × 480

59.94/60Hz

 

 

 

480i (60Hz)

720 × 480

59.94/60Hz

 

 

 

480p (60Hz)

720 × 480

59.94/60Hz

 

 

 

 

720p (60Hz)

1280

× 720

59.94/60Hz

 

 

 

 

1080i (60Hz)

1920

× 1080

59.94/60Hz

 

 

 

 

1080p (24/60Hz)

1920

× 1080

59.94/60Hz

 

 

 

 

Note:

The edges of the images may be hidden.

If receiving a 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning).

16

Loading...
+ 36 hidden pages