KE-5T, KE-5TB,
KE-8T, KE-9TB, KE-17TB
PLASTIC-PALM
10BASE-T ETHERNET HUB
User’s Guide
FCC Warning
This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Table of Contents
INTRODUCTION............................................................................1
PRODUCT FEATURES..................................................................... |
1 |
THE FRONT PANEL OF PLASTIC-PALM HUBS...................... |
2 |
THE REAR PANEL OF PLASTIC-PALM HUBS........................ |
3 |
LED INDICATORS.......................................................................... |
4 |
REAR PANEL INDICATORS............................................................ |
5 |
Twisted-pair Jacks ................................................................. |
5 |
Uplink Jack ............................................................................. |
5 |
Power Jack .............................................................................. |
6 |
INSTALLATION..............................................................................7
INSTALLING THE HUB................................................................... |
7 |
CONNECTING THE POWER ADAPTER.......................................... |
7 |
CABLES AND CONNECTORS......................................................... |
8 |
CROSSOVER CABLES..................................................................... |
9 |
SPECIFICATIONS .......................................................................10
GENERAL ...................................................................................... |
10 |
ENVIRONMENTAL AND PHYSICAL............................................. |
10 |
P/N: 6012-0161110 Rev.01
Introduction
Thank you for choosing the PLASTIC-PALM 10BASE-T Ethernet Hub. The hub was designed and manufactured to give you years of trouble-free and reliable service.
The hub is designed for plug-and-play installation and easy management. The hub provides an Uplink connection for your network expansion via a RJ-45 connector, making it easy to link two or more hubs together.
The hub features LINK/RX LEDs to show the connection and receive status of each twisted pair port. PWR and COL indicators show the status of the hub as whole.
Product Features
üCompliance to IEEE 802.3 10BASE-T/2 standard.
üAutomatic paritioning function of each port to isolate network failure.
üEthernet connections support Category 3 or better twisted-pair cable.
üLED indicators for each twisted pair port for link and receive reporting diangnosis.
üUplink jack for easy linking of two hubs to further expand the network.
üCompact design in palm size.
üThe hub’s housing made by Plastic materil.
1
Loading...