Oregon 59J, 58L, 59L, 58J User Manual

0 (0)
Oregon 59J, 58L, 59L, 58J User Manual

 

 

FEATURES AND BENEFITS

CHAIN

 

 

58J, 58L, 59J, AND 59L CHAINS

These new Oregon® .404”-pitch Super Guard® chains have been carefully developed to replace two popular families of chain. Users of our previous 59LG-series and 52-series chains will find it easy to make the switch. 58J, 58L, 59J, and 59L all feature a fast-working new chisel cutter that delivers performance superior to its predecessors in all cutting modes. The new cutter is mounted on our proven unequal-pitch 59 chassis for an unmatched combination of performance and durability. Oregon® 58/59 Super Guard® gives professional timber cutters who use .404”-pitch chains what they want: out- of-the-box sharpness, high performance, resistance to stretch, and consistency from chain to chain. These chains feature ramped depth gauges to reduce kickback energies, and are recommended for cutting clean wood with saws 4.0 cubic inches (65cc) and larger, and with bars 20" (50cm) and longer.

Safety / ANSI: 58J, 58L, 59J, and 59L are yellow-label chains with kickback-reducing features. These chains do not meet the kickback requirements for low-kickback chains.

Recommended Use: Professional use by loggers and forest firefighters who prefer large saws and .404”-pitch chain.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FEATURES

 

 

 

 

 

 

 

 

BENEFITS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Chisel cutters, factory ground with

 

 

• Superior cutting speed (nose-clear, nose-buried,

 

 

 

optimum angles

 

 

 

and boring)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Smooth, easy cutting, minimal feed force required,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

minimizes operator fatigue

 

 

 

 

Sharpens with a 7/32” round file

 

 

• Easy filing and maintenance

 

 

 

 

Depth gauge is ramp-shaped,

 

 

• Reduces roughness and kickback energies

 

 

 

 

and offset

 

 

 

 

 

 

 

 

 

without affecting performance

 

 

 

 

Clean-ground gullet

 

 

• Maximum chip flow, helps prevent clogs from debris

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• No out-of-the-box filing is needed

 

 

 

• Top-plate-angle

 

 

 

 

 

• Easy, consistent sharpening

 

 

 

 

 

witness mark

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lubrilinktie straps

 

 

 

 

• Improved chain and bar lubrication

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• More oil stays where it’s needed – on the chain

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The volume of oil required is reduced

 

 

 

Long, high-strength cutter top plate

 

 

• Long working life, durable, resists breakage

 

 

 

Made from patented OCS-01 steel-alloy

• Tougher than the steel on other chains, 20% tougher

 

 

 

 

material (U.S. patent no. 5,772,957)

 

 

 

at room temperature, 125% tougher at minus 20° F.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHAIN PART

 

 

 

 

CUTTER

CUTTER

KICKBACK-REDUCING

 

 

 

 

 

 

 

NUMBER

PITCH

GAUGE

SEQUENCE

TYPE

FEATURES

 

 

 

 

 

 

 

58J

.404”

.058”

Skip

Chisel

Ramp-shaped

 

Because every

 

 

 

58L

 

 

.058”

Standard

 

Depth Gauges

 

 

cut counts

 

 

 

59J

 

 

.063”

Skip

 

 

 

59L F&B

A107035 AB

0301

 

59L

 

 

.063”

Standard

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Loading...
+ 1 hidden pages