Using remote controller
*Diagram for RC-482M
RCVR MODE
CH |
VOL |
MUTING
TUN
RCVR MODE
VOL 
MUTING
TAPE operation buttons
Overview
The RC-482M/480M remote controller is a useful tool that can not only operate the TX-SR700/700E/600/600E, but also all the other components of your home theater as well. To operate any component, first press the Mode button on the remote controller that corresponds to the component that you wish to control. Then simply press the desired operation button and the component will operate accordingly. For example, if you wish to select the CD input source at the TX-SR700/700E/600/600E with the remote controller, first press the RCVR MODE button to select the TX-SR700/700E/600/ 600E and then press the CD (INPUT SELECTOR) button.
Calling up a preset radio station
1.Press the RCVR MODE button.
The RCVR MODE button lights green.
2.Press the TUN input selector button.
3.Press the desired operation button.
Operation buttons:
CH 
: Selects the desired preset station number
You may also use the following buttons:
VOL 
: Adjusts volume at TX-SR700/700E/600/600E
MUTING: Activates muting function at TX-SR700/700E/600/ 600E
Controlling an Onkyo cassette tape deck
The 
connector of the Onkyo cassette tape deck must be connected to the TX-SR700/700E/600/600E (see page 29).
1.Press the RCVR MODE button.
The RCVR MODE button lights green.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo cassette tape deck.
Operation buttons:
: Play
: Stop
: Rewind
: Fast forward
: Skips to beginning of next track during playback
: Skips to beginning of current track during playback
REC: Record/Pause
: Reverse playback
You may also use the following buttons:
VOL 
: Adjusts volume at TX-SR700/700E/600/600E
MUTING: Activates muting function at TX-SR700/700E/600/ 600E
Note:
Even for devices with the 
and 
buttons, signal discrepancies may cause them not to work properly.
63
Using remote controller
ON 
STANDBY
CD MODE
DISC 
VOL 
MUTING
CD operation buttons
Numeric keys
Controlling an Onkyo CD player
The 
connector of the Onkyo compact disc player must be connected to the TX-SR700/700E/600/600E (see page 29).
1.Press the CD MODE button.
The CD MODE button lights green.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo compact disc player.
Operation buttons:
ON: Turns on and off the compact disc player (same as the STANDBY button on the remote controller)
DISC 
: Selects disc in CD changer
: Track down
: Track up
: Play
: Stop
: Skip backward
: Skip forward
: Pause
OPEN/CLOSE 
: Opens/closes disc tray
0, 1 to 9, +10: Numeric keys
RANDOM: Random playback
You may also use the following buttons:
VOL 
: Adjusts volume at TX-SR700/700E/600/600E
MUTING: Activates muting function at TX-SR700/700E/600/ 600E
64
Using remote controller
ON |
STANDBY |
|
|
DVD MODE |
|
RETURN |
SETUP |
|
ENTER, |
||
|
||
DISC |
VOL |
|
TOP MENU |
MENU |
|
AUDIO SEL |
MUTING |
|
ANGLE |
SUBTITLE |
|
|
DVD |
|
|
operation |
|
|
buttons |
Numeric keys
SEARCH
Controlling an Onkyo DVD player
The
connector of the Onkyo DVD player must be connected to the TX-SR700/700E/600/600E (see page 29).
1.Press the DVD MODE button.
The DVD MODE button lights green.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo DVD player.
Operation buttons:
ON: Turns DVD player on and off
STANDBY: Turns DVD player off (Some sets may not respond to this button. In this case, use the ON button to put the DVD player in the standby state.)
SETUP: Displays OSD Menu of the DVD player
: Moves cursor in the OSD Menu of the DVD player
ENTER: Enter button for the OSD Menu of the DVD player
RETURN: Return button for the OSD Menu of the DVD player
TOP MENU or MENU: Displays menu screens recorded on DVD media
DISC 
: Selects disc in DVD changer
AUDIO SEL: Selects audio or language track (if recorded on the DVD)
ANGLE: Selects camera angle (if recorded on the DVD)
SUBTITLE: Selects subtitle language (if recorded on the DVD)
SEARCH: Searches for location on disc to start playback
RANDOM: Random playback
: Chapter/Track down
: Chapter/Track up
: Play
: Stop
: Fast reverse
: Fast forward
: Pause
OPEN/CLOSE 
: Opens/closes disc tray
0, 1 to 9, +10: Numeric keys
You may also use the following buttons:
VOL 
: Adjusts volume at TX-SR700/700E/600/600E
MUTING: Activates muting function at TX-SR700/700E/600/ 600E
Note:
When operating an Onkyo DVD player directly with the remote controller without connecting the 
terminals, pre-programming is necessary (see page 67).
65
Using remote controller
ON 
STANDBY
MD MODE
VOL 
MUTING
MD operation buttons
Numeric keys
ENTER
TV MODE |
VCR MODE |
TV |
VCR |
VOL 
MUTING
Controlling an Onkyo MD recorder
The 
conneÇóctor of the Onkyo MD recorder must be connected to the TX-SR700/700E/600/600E (see page 29).
1.Press the MD MODE button.
The MD MODE button lights green.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo MD recorder.
Operation buttons:
ON: Turns on and off MD player (same as the STANDBY button on the remote controller)
: Track down
: Track up
: Play
: Stop
: Skip backward
: Skip forward
REC: Record
: Pause
: Eject
1 to 9, 0, --/---: Numeric keys
ENTER: Enters settings
You may also use the following buttons:
VOL 
: Adjusts volume at TX-SR700/700E/600/600E
MUTING: Activates muting function at TX-SR700/700E/600/ 600E
VCR and TV MODE buttons
No preset codes are programmed into the VCR and TV MODE buttons. Therefore you can use these buttons to program the remote controller signals of other devices.
There are two methods. One method is selecting the name of a different brand from the table, entering the setting number listed, and calling up the pre-programming code (see page 67). The other method is sending the commands from the other brand’s remote control directly into this remote controller (see page 70).
When in the VCR and TV mode, you may use the following buttons:
VOL 
: Adjusts volume at TX-SR700/700E/600/600E
MUTING: Activates muting function at TX-SR700/700E/600/ 600E
TV
: Turns on and off the television
(and switches to the TV mode)
VCR
: Turns on and off the VCR
(and switches to the VCR mode)
66
Loading...