Onkyo HT-R390 User Manual

0 (0)

AV Receiver

HT-R390 HT-R290

Instruction Manual

Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit.

Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.

Please retain this manual for future reference.

Contents

Introduction ...................................

2

Connections.................................

10

Turning On & Basic Operations ......

17

Advanced Operations .................

27

Controlling Other Components...

38

Appendix ......................................

44

En

PORTABLE CART WARNING

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

 

AVIS

RISK OF ELECTRIC SHOCK

 

RISQUE DE CHOC ELECTRIQUE

DO NOT OPEN

 

NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to

S3125A

avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

En

15.Damage Requiring Service

Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power-supply cord or plug is damaged,

B.If liquid has been spilled, or objects have fallen into the apparatus,

C.If the apparatus has been exposed to rain or water,

D.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,

E.If the apparatus has been dropped or damaged in any way, and

F.When the apparatus exhibits a distinct change in performance this indicates a need for service.

16.Object and Liquid Entry

Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.

Don’t put candles or other burning objects on top of this unit.

17.Batteries

Always consider the environmental issues and follow local regulations when disposing of batteries.

18.If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation.

Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a flue-like gap for warm air to escape.

The temperature protection operates if the apparatus attain an abnormal high temperature.

The apparatus cannot operate until it has cooled down.

2

Precautions

1.Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.

2.AC Fuse—The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact your Onkyo dealer.

3.Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.

4.Power WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the unit’s rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times.

Pressing the [ON/STANDBY] button to select Standby mode does not fully disconnect from the mains. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet.

5.Preventing Hearing Loss Caution

Excessive sound pressure from earphones and headphones can cause hearing loss.

6.Batteries and Heat Exposure Warning

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat as sunshine, fire or the like.

7.Never Touch this Unit with Wet Hands—Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer.

8.Handling Notes

If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it.

Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.

This unit’s top and rear panels may get warm after prolonged use. This is normal.

If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally.

For U.S. models

FCC Information for User CAUTION:

The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

For Canadian Models

NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modèle pour les Canadien

REMARQUE: CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB003 DU CANADA.

Sur les modèles dont la fiche est polarisée: ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

En

3

Batteries (AA/R6)

For British models

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue: Neutral Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse.

If the power cord’s plug is not suitable for your socket outlets, cut it off and fit a suitable plug. Fit a suitable fuse in the plug.

For European Models

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.

GROEBENZELL, GERMANY

K. MIYAGI

ONKYO EUROPE ELECTRONICS GmbH

Supplied Accessories

Make sure you have the following accessories:

Indoor FM antenna ( page 16)

AM loop antenna ( page 16)

Power cord (Brazilian models) ( page 16)

Remote controller (RC-762M) and two batteries (AA/R6) ( page 4)

*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color.

Installing the batteries

Note

• If the remote controller doesn’t work reliably, try replacing the batteries.

Don’t mix new and old batteries or different

types of batteries.

If you intend not to use

the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

Remove expired batteries as soon as possible to prevent damage from leakage or corrosion.

Aiming the remote controller

To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below.

Remote control sensor

AV receiver

Approx. 16 ft. (5 m)

En

4

Contents

Introduction

 

Important Safety Instructions .........................................

2

Precautions.......................................................................

3

Supplied Accessories......................................................

4

Features ............................................................................

6

Front & Rear Panels.........................................................

7

Front Panel.....................................................................

7

Display............................................................................

8

Rear Panel .....................................................................

8

Remote Controller............................................................

9

Controlling the AV Receiver ...........................................

9

Controlling Other Components

 

iPod/iPhone Playback via Onkyo Dock ........................

38

Using the Onkyo Dock..................................................

38

Controlling Your iPod/iPhone .......................................

39

Controlling Other Onkyo Components ........................

41

Preprogrammed Remote Control Codes ......................

41

Entering Remote Control Codes...................................

41

Remote Control Codes for

 

Onkyo Components Connected via u.....................

41

Resetting REMOTE MODE Buttons .............................

42

Resetting the Remote Controller ..................................

42

Controlling Other Components .....................................

42

Connections

 

Connecting the AV Receiver .........................................

10

Connecting Your Speakers ..........................................

10

About AV Connections .................................................

12

Connecting Components with HDMI ............................

13

Connecting Your Components .....................................

14

Connecting Onkyo u Components ............................

15

Connecting a Recording Component ...........................

15

Connecting Antenna.....................................................

16

Connecting the Power Cord .........................................

16

Turning On & Basic Operations

 

Turning On/Off the AV Receiver ...................................

17

Turning On ...................................................................

17

Turning Off ...................................................................

17

Playback..........................................................................

18

Playing the Connected Component..............................

18

Listening to AM/FM Radio ............................................

18

Using Basic Functions ..................................................

21

Using the Listening Modes ...........................................

21

Using the Home Menu..................................................

24

Selecting Speakers A and B.........................................

24

Using the Sleep Timer..................................................

24

Setting the Display Brightness .....................................

25

Displaying Source Information .....................................

25

Changing the Input Display ..........................................

25

Using the Music Optimizer ...........................................

25

Muting the AV Receiver................................................

26

Using Headphones.......................................................

26

Recording .....................................................................

26

Advanced Operations

 

Advanced Setup .............................................................

27

On-screen Setup Menus ..............................................

27

Common Procedures in Setup Menu ...........................

27

HDMI Input ...................................................................

28

Component (Component Video Input)..........................

28

Digital Audio (Digital Audio Input).................................

28

Sp Config (Speaker Configuration) ..............................

29

Sp Distance (Speaker Distance) ..................................

30

Level Cal (Level Calibration) ........................................

30

Audio Adjust .................................................................

31

Source Setup................................................................

32

Hardware......................................................................

34

HDMI Setup..................................................................

34

Using the Audio Settings ..............................................

36

Appendix

 

Troubleshooting .............................................................

44

Connection Tips and Video Signal Path ......................

48

About HDMI.....................................................................

49

Using an RIHD-compatible TV, Player,

 

or Recorder...................................................................

50

Specifications .................................................................

52

To reset the AV receiver to its factory defaults, turn it on and, while holding down VCR/DVR, press

8ON/STANDBY ( page 44).

En

5

Features

Amplifier

110 Watts/Channel @ 6 ohms

100 Watts/Channel @ 6 ohms (IEC)

120 Watts/Channel @ 6 ohms (JEITA)

Optimum Gain Volume Circuitry

H.C.P.S. (High Current Power Supply) Massive High Power Transformer

Processing

HDMI (Audio Return Channel, 3D, DeepColor, x.v.Color*1, Lip Sync, DTS*2-HD Master Audio, DTSHD High Resolution Audio, Dolby TrueHD*3, Dolby Digital Plus, DSD and Multi-CH PCM)

Non-Scaling Configuration

A-Form Listening Mode Memory

Direct Mode

Music Optimizer*4 for Compressed Digital Music files

192 kHz/24-bit D/A Converters

Powerful and Highly Accurate 32-bit Processing DSP

Connections

4 HDMI*5 Inputs and 1 Output

Onkyo pfor System Control

3 Digital Inputs (2 Optical/1 Coaxial)

Component Video Switching (2 Inputs/1 Output)

Universal Port for the Dock for iPod®/iPhone®*6/HD Radio™*7 tuner module (North American, Central American and South American models)/DAB+ tuner module (European and Asian models)

Miscellaneous

40 FM/AM Presets

Audyssey Dynamic EQ®*8 for loudness correction

Audyssey Dynamic Volume®*8 to maintain optimal listening level and dynamic range

EX.BASS for natural deeper bass

Crossover Adjustment (40/50/60/70/80/90/100/120/150/200 Hz)

A/V Sync Control Function (up to 400 ms)

Auto Standby Function

On-Screen Display via HDMI

*1 “x.v.Color” is a trademark of Sony Corporation.

*2

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes software.

© DTS, Inc. All Rights Reserved.

*3

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

*4 Music Optimizer™ is a trademark of Onkyo Corporation.

*5

“HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.”

*6 Apple, iPhone, iPod, and iPod nano are trademarks of Apple Inc, registered in the U.S. and other countries.

*7

The HD Radio Ready logo is a proprietary trademark of iBiquity Digital Corp.

To receive HD Radio broadcasts, you must install an Onkyo UP-HT1 HD Radio tuner module (sold separately).

*8

Manufactured under license from Audyssey Laboratories™, Inc. U.S. and foreign patents pending.

Audyssey Dynamic EQ® and Audyssey Dynamic Volume® are registered trademarks of Audyssey Laboratories, Inc.

En

6

Front & Rear Panels

Front Panel

(North American and Brazilian models)

a b cd e f g h i j k l m n

o p q

 

 

 

 

 

 

 

r

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

s

(European and Asian models)

 

 

 

 

 

 

 

 

 

t

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The page numbers in parentheses show where you can find the main explanation for each item.

a 8ON/STANDBY button (17) b HDMI THRU indicator (35)

c SPEAKERS A and B buttons (24) d Remote control sensor (4)

e LISTENING MODE buttons (21) f Display (8)

gDIMMER button (North American and Brazilian models) (25)

h MEMORY button (19)

i TUNING MODE button (18) j DISPLAY button (25)

k SETUP button (27)

lTUNING, PRESET (18 to 19), arrow and ENTER buttons

m RETURN button

n MASTER VOLUME control (18)

o MUSIC OPTIMIZER button (25, 37) p PHONES jack (26)

q TONE and Tone Level buttons (36) r Input selector buttons (18)

s AUX INPUT AUDIO and VIDEO jacks (14, 26)

tRT/PTY/TP button (European and Asian models) (20)

En

7

Onkyo HT-R390 User Manual

Display

 

 

 

 

 

 

a

b

c

d

e

f

g

 

 

 

 

 

 

h

 

 

 

 

 

 

i

For detailed information, see the pages in parentheses.

a A and B speaker indicators (24) b Audio input indicators

c Listening mode and format indicators (21, 25) d Audyssey indicators (32)

e Tuning indicators (18)

fRDS indicator (excluding North American and Brazilian models) (19)

g SLEEP indicator (24, 34) h MUTING indicator (26) i Message area

Rear Panel

Illustrations are based on HT-R390.

(North American, European and Asian models)

a b

 

 

 

 

c d e f

 

 

 

g

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

h

i j

k

(Brazilian models)

En

8

a DIGITAL IN COAXIAL and OPTICAL jacks b COMPONENT VIDEO IN and OUT jacks c HDMI IN and OUT jacks

d FM ANTENNA jack and AM ANTENNA terminal e UNIVERSAL PORT jack

fSPEAKERS terminals

(FRONT A, CENTER, SURR, SUBWOOFER, FRONT B)

gPower cord (North American, European and Asian models)

h u REMOTE CONTROL jack

iComposite video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT, CBL/SAT IN, GAME IN, TV/CD IN)

j MONITOR OUT V jack

k AC INLET (Brazilian models)

See “Connecting the AV Receiver” for connection ( pages 10 to 16).

Remote Controller

Controlling the AV Receiver

a

i

c

 

b

 

 

j

c

d

 

 

k

e d

e a

f

l

m

g

 

f

h

n

b

 

To control the AV receiver, press RECEIVER to select Receiver mode.

You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components.

See “Entering Remote Control Codes” for more details ( page 41).

For detailed information, see the pages in parentheses.

a 9ON/STANDBY button (17)

bREMOTE MODE/INPUT SELECTOR buttons (18, 41 to 42)

c TONE and Tone Level buttons (36) d SP A/B button (24)

e Arrow q/w/e/rand ENTER buttons f SETUP button (27)

g LISTENING MODE buttons (21) h DIMMER button (25)

i DISPLAY button (25) j MUTING button (26) k VOL q/wbutton (18) l RETURN button

m AUDIO button (24) n SLEEP button (24)

Controlling the tuner

To control the AV receiver’s tuner, press TUNER (or

RECEIVER).

You can select AM or FM by pressing TUNER repeatedly.

a Arrow q/wbuttons (18)

b D.TUN button (19)

c DISPLAY button (19)

d TUN MODE button (18)

e CH +/– button (19)

f Number buttons (19)

En

9

Connecting the AV Receiver

Connecting Your Speakers

Connecting the Speaker Cables

The following illustration shows which speaker should be connected to each pair of terminals.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Front B right

 

 

 

 

Front B left

Speakers B

Passive

Surround

Surround

Subwoofer

right

left

Front A right

Center

Front A left

 

Speakers A

 

Using a Passive Subwoofer.

To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room, and choose the one that provides the most satisfying results

Push-type speaker terminals

Strip 3/8" to 1/2" (10 to 12 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown.

Corner position

1/3 of wall position

3/8" to 1/2" (10 to 12 mm)

En

10

Speaker Configuration

The following table indicates the channels you should use depending on the number of speakers that you have.

No matter how many speakers you use, a passive subwoofer is recommended for a really powerful and solid bass.

To get the best from your surround sound system, you need to set the speaker settings manually ( page 29).

Number of channels

2

3

4

5

Front speakers

 

 

 

 

 

 

 

 

 

Center speaker

 

 

 

 

 

 

 

 

 

Surround speakers

 

 

 

 

 

 

 

 

 

Connecting the Speaker Cables

The AV receiver’s positive (+) speaker terminals are color-coded for ease of identification. (The negative (–) speaker terminals are all black.)

Speaker

Color

 

 

Front left

White

 

 

Front right

Red

 

 

Center

Green

 

 

Surround left

Blue

 

 

Surround right

Gray

 

 

Subwoofer

Purple

 

 

Speaker Connection Precautions

Read the following before connecting your speakers:

You can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in amp protection circuit may be activated.

Disconnect the power cord from the wall outlet before making any connections.

Read the instructions supplied with your speakers.

Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive (+) terminals, and negative (–) terminals only to negative (–) terminals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural.

Unnecessarily long, or very thin speaker cables may affect the sound quality and should be avoided.

Be careful not to short the positive and negative wires. Doing so may damage the AV receiver.

Make sure the metal core of the wire does not have contact with the AV receiver’s rear panel. Doing so may damage the AV receiver.

Don’t connect more than one cable to each speaker terminal. Doing so may damage the AV receiver.

Don’t connect one speaker to several terminals.

En

11

About AV Connections

Connected image with AV components

HDMI cable

 

: Video & Audio

 

AV receiver

 

Blu-ray Disc/

 

TV, projector, etc.

DVD player

Game console

Other cables

 

: Video

 

 

 

: Audio

 

 

AV receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blu-ray Disc/

 

 

 

 

 

 

 

TV, projector, etc.

Game console

DVD player

Before making any AV connections, read the manuals supplied with your AV components.

Don’t connect the power cord until you’ve completed and double-checked all AV connections.

• Push plugs in all the way to make good connections (loose connections can cause noise or

 

 

 

 

 

Right!

 

malfunctions).

 

 

 

 

 

 

 

 

 

• To prevent interference, keep audio and video cables away from power cords and speaker cables.

Wrong!

AV Cables and Jacks

Signal

Cable

Jack

 

Description

Video and

HDMI

 

HDMI

HDMI connections can carry digital video and audio.

Audio

 

 

 

 

 

 

 

Video

Component video

Y

 

 

 

 

PB

 

 

PR

Green

Component video separates the luminance (Y) and color

difference signals (PB, PR), providing the best picture Blue quality (some TV manufacturers label their component

video sockets slightly differently).

Red

Composite video

Yellow

Composite video is commonly used on TVs, VCRs, and

V

other video equipment.

 

 

Audio

Optical digital

 

audio

OPTICAL

Optical digital connections allow you to enjoy digital

 

 

 

sound such as PCM*, Dolby Digital or DTS. The audio

 

 

 

 

 

 

quality is the same as coaxial.

 

 

 

Coaxial digital

Coaxial digital connections allow you to enjoy digital

audio

Orange sound such as PCM*, Dolby Digital or DTS. The audio

 

quality is the same as optical.

Analog audio (RCA)

L

R

White

Analog audio connections (RCA) carry analog audio.

 

Red

 

*Available sampling rate for PCM input signal is 32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the HDMI connection.

Note

The AV receiver does not support SCART plugs.

The AV receiver’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s removed. Push plugs in all the way.

Caution

To prevent shutter damage, hold the optical plug straight when inserting and removing.

En

12

Connecting Components with HDMI

VCR or DVD recorder/Digital Video Recorder

Game console

TV, projector, etc.

 

Satellite/cable set-top box, etc. Blu-ray Disc/DVD player

Connect your components to the appropriate jacks. The default input assignments are shown below.

: Assignment can be changed ( page 28).

Jack

 

Components

Assignable

Input

HDMI IN1

Blu-ray Disc/DVD player

 

 

HDMI IN2

VCR or DVD recorder/Digital Video Recorder

 

 

HDMI IN3

Satellite/cable set-top box, etc.

 

 

HDMI IN4

Game console

 

Output

HDMI OUT

TV, projector, etc.

 

See also:

“Connection Tips and Video Signal Path” ( page 48)

“About HDMI” ( page 49)

“Using an RIHD-compatible TV, Player, or Recorder” ( page 50)

Audio return channel (ARC) function

Audio return channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the AV receiver ( page 35).

To use ARC function, you must select the TV/CD input selector, your TV must support ARC function and “HDMI Ctrl(RIHD)” is set to “On” ( page 34).

Tip

To listen to audio received by the HDMI IN jacks through your TV’s speakers:

Set the “HDMI Ctrl(RIHD)” setting to “On” for an p-compatible TV.

Set the “Audio TV Out” setting to “On” ( page 35) when the TV is not compatible with por the “HDMI Ctrl(RIHD)” setting to “Off”.

Set your Blu-ray Disc/DVD player’s HDMI audio output setting to PCM.

To listen to TV audio through the AV receiver, see “Connecting Your Components” ( page 14).

Note

When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound may be cut off.

When the “Audio TV Out” setting is set to “On” ( page 35) to hear from your TV’s speakers, by controlling the AV receiver’s volume, the sound will be output from the AV receiver’s speakers, too. When the “HDMI Ctrl(RIHD)” setting is set to “On

( page 35) to hear from speakers of p-compatible TV, by controlling the AV receiver’s volume, the AV receiver’s speakers will produce sound while the TV’s speakers are muted. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume.

En

13

Connecting Your Components

The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.

A B C D E

Connect your components to the appropriate jacks. The default input assignments are shown below.

 

 

 

 

 

 

: Assignment can be changed ( page 28).

 

 

 

 

 

 

No.

Jack

 

 

Components

Assignable

 

 

 

 

 

 

 

A

 

AUX INPUT

 

VIDEO

 

Camcorder, etc

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO L/R

 

 

 

 

 

 

 

 

 

 

 

B

 

DIGITAL IN

 

OPTICAL

1 (GAME)

Game console

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 (TV/CD)

TV, CD player

 

 

 

 

 

 

 

 

 

 

 

 

 

COAXIAL (BD/DVD)

Blu-ray Disc/DVD player

 

 

 

 

 

 

 

 

 

C

 

COMPONENT

 

IN 1 (BD/DVD)

 

Blu-ray Disc/DVD player, RI dock

 

 

 

VIDEO

 

 

 

 

 

 

 

 

IN 2 (CBL/SAT)

 

Satellite/cable set-top box, RI dock, etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

TV, projector, etc.

 

 

 

 

 

 

 

 

 

D

 

MONITOR OUT

 

 

TV, projector, etc.

 

 

 

 

 

 

 

 

 

 

BD/DVD IN

 

 

Blu-ray Disc/DVD player

 

 

 

 

 

 

 

 

 

 

VCR/DVR IN

 

 

VCR, DVD recorder/Digital Video Recorder,

 

 

 

 

 

 

 

RI dock

 

 

 

 

 

 

 

 

 

 

CBL/SAT IN

 

 

Satellite/cable set-top box, etc.

 

 

 

 

 

 

 

 

 

 

GAME IN

 

 

Game console, RI dock

 

 

 

 

 

 

 

 

 

 

TV/CD IN

 

 

TV, CD player, cassette tape deck, MD, CD-R,

 

 

 

 

 

 

 

Turntable*1, RI dock

 

E

 

UNIVERSAL PORT

 

Universal port option dock (UP-A1 etc.)

 

*1

Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn’t have it, you’ll need a commercially

 

available phono preamp.

 

 

 

 

If your turntable has a moving coil (MC) type cartridge, you’ll need a commercially available MC head amp or MC transformer as well as a phono preamp. See your turntable’s manual for details.

With connection B, you can enjoy Dolby Digital and DTS.

If your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to connect the main stereo output using connection D.

How to record the video

See “Recording” to make a connection for video recording ( page 26).

En

14

Connecting Onkyo u Components

1

Make sure that each Onkyo component is

 

connected with an analog audio cable (connection

 

D in the hookup examples) ( page 14).

2

Make the uconnection (see the illustration).

3

If you’re using an RI Dock or cassette tape deck,

 

change the Input Display ( page 25).

With u(Remote Interactive), you can use the following special functions:

System On/Auto Power On

When you start playback on a component connected via u, if the AV receiver is on Standby, it will automatically turn on and select that component as the input source.

Direct Change

When playback is started on a component connected via u, the AV receiver automatically selects that component as the input source.

Remote Control

You can use the AV receiver’s remote controller to control your other u-capable Onkyo components, pointing the remote controller at the AV receiver’s remote control sensor instead of the component. You must enter the appropriate remote control code first ( page 41).

 

R

L

e.g., CD player

ANALOG

AUDIO OUT

 

 

 

R

L

e.g., DVD player

ANALOG

AUDIO OUT

Note

Use only ucables for uconnections. ucables are supplied with Onkyo players (DVD, CD, etc.).

Some components have two ujacks. You can connect either one to the AV receiver. The other jack is for connecting additional u-capable components.

Connect only Onkyo components to ujacks. Connecting other manufacturer’s components may cause a malfunction.

Some components may not support all ufunctions. Refer to the manuals supplied with your other Onkyo components.

Connecting a Recording Component

See “Recording” on the recording ( page 26).

L

R

AUDIO

VIDEO

IN

IN

VCR, DVD recorder, cassette tape deck, CDR, MD recorder, etc.

Note

The AV receiver must be turned on for recording. Recording is not possible while it’s in Standby mode.

If you want to record directly from your TV or playback VCR to the recording VCR without going through the AV receiver, connect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs. See the manuals supplied with your TV and VCR for details.

Video signals connected to composite video inputs can be recorded only via composite video outputs. If your TV/VCR is connected to a composite video input, the recording VCR must be connected to a composite video output.

The surround sound and DSP listening modes cannot be recorded.

Copy-protected Blu-ray discs and DVDs cannot be recorded.

Sources connected to a digital input cannot be recorded. Only analog inputs can be recorded.

DTS signals will be recorded as noise, so don’t attempt analog recording of DTS CDs or LDs.

En

15

Connecting Antenna

This section explains how to connect the supplied indoor FM antenna and AM loop antenna.

The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.

Caution

Be careful that you don’t injure yourself when using thumbtacks.

Push.

Insert wire.

Release.

Assembling the AM loop antenna

 

North American and

European and Asian models

Brazilian models

 

Insert the plug fully

Insert the plug fully

into the jack.

into the jack.

Thumbtacks, etc.

AM loop antenna (supplied)

Indoor FM antenna (supplied)

Note

Once your AV receiver is ready for use, you’ll need to tune into a radio station and position the antenna to achieve the best possible reception.

Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.

Tip

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.

If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM antenna.

Connecting the Power Cord

1 (Brazilian models)

Connect the supplied power cord to the AV receiver’s AC INLET.

To AC wall outlet

2 Plug the power cord into an AC wall outlet.

Note

Before connecting the power cord, connect all of your speakers and AV components.

Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit.

Do not use a power cord other than the one supplied with the AV receiver. The supplied power cord is designed exclusively for use with the AV receiver and should not be used with any other equipment.

Never disconnect the power cord from the AV receiver while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet first, and then the AV receiver.

En

16

Turning On/Off the AV Receiver

8ON/STANDBY

9 ON/STANDBY

RECEIVER

Turning On

1 Press 8ON/STANDBY on the front panel. or

Press RECEIVER followed by 9ON/STANDBY on the remote controller.

The AV receiver comes on, the display lights.

Turning Off

1 Press 8ON/STANDBY on the front panel. or

Press RECEIVER followed by 9ON/STANDBY on the remote controller.

The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always turn down the volume before you turn it off.

Tip

• See “Auto Standby” about a power management setting ( page 34).

En

17

Loading...
+ 39 hidden pages