Onkyo CR-715DAB, CR-715 User Manual

CD Receiver

CR-715 CR-715DAB

Instruction Manual

Thank you for purchasing an Onkyo CD Receiver. Please read this manual thoroughly before making any connections and plugging it in.

Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver.

Please retain this manual for future reference.

Contents

Getting Started ..........................

2

Connections ............................

14

Basic Operation ......................

25

Playing a Disc..........................	28
Listening to the Radio ...........	36
Clock and Timer ......................	47
Miscellaneous .........................	54
Troubleshooting................................	54
If you can’t resolve an issue, try reset-
ting the CD receiver by holding down
the [ ] button and pressing the
[STANDBY/ON] button.

En

PORTABLE CART WARNING

S3125A

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING		AVIS
RISK OF ELECTRIC SHOCK		RISQUE DE CHOC ELECTRIQUE
DO NOT OPEN		NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Damage Requiring Service

Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power-supply cord or plug is damaged,

B.If liquid has been spilled, or objects have fallen into the apparatus,

C.If the apparatus has been exposed to rain or water,

D.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,

E.If the apparatus has been dropped or damaged in any way, and

F.When the apparatus exhibits a distinct change in performance this indicates a need for service.

16.Object and Liquid Entry

Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.

Don’t put candles or other burning objects on top of this unit.

17.Batteries

Always consider the environmental issues and follow local regulations when disposing of batteries.

18.If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation.

Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a flue-like gap for warm air to escape.

2

Precautions

1.Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.

2.AC Fuse—The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact your Onkyo dealer.

3.Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.

4.Power WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the unit’s rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times.

Pressing the [STANDBY/ON] button to select Standby mode does not fully shutdown the unit. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet.

5.Never Touch this Unit with Wet Hands—Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer.

6.Handling Notes

•If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it.

•Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.

•This unit’s top and rear panels may get warm after prolonged use. This is normal.

•If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally.

•When you’ve finished using this unit, remove all discs and turn off the power.

7.Installing this Unit

•Install this unit in a well-ventilated location.

•Ensure that there’s adequate ventilation all around this unit, especially if it’s installed in an audio rack. If the ventilation is inadequate, the unit may overheat, leading to malfunction.

•Do not expose this unit to direct sunlight or heat sources, because its internal temperature may rise, shortening the life of the optical pickup.

•Avoid damp and dusty places, and places subject to vibrations from loudspeakers. Never put the unit on top of, or directly above a loudspeaker.

•Install this unit horizontally. Never use it on its side or on a sloping surface, because it may cause a malfunction.

•If you install this unit near a TV, radio, or VCR, the picture and sound quality may be affected. If this occurs, move this unit away from the TV, radio, or VCR.

8.To Obtain a Clear Picture—This unit is a hightech, precision device. If the lens on the optical pickup, or the disc drive mechanism becomes dirty or worn, the picture quality may be affected. To maintain the best picture quality, we recommend regular inspection and maintenance (cleaning or worn part replacement) every 1,000 hours of use depending on the operating environment. Contact your Onkyo dealer for details.

9.Moisture Condensation

Moisture condensation may damage this unit.

Read the following carefully:

Moisture may condense on the lens of the optical pickup, one of the most important parts inside this unit.

•Moisture condensation can occur in the following situations:

–The unit is moved from a cold place to a warm place.

–A heater is turned on, or cold air from an air conditioner is hitting the unit.

–In the summer, when this unit is moved from an air conditioned room to a hot and humid place.

–The unit is used in a humid place.

•Do not use this unit when there’s the possibility

of moisture condensation occurring. Doing so may damage your discs and certain parts inside this unit.

If condensation does occur, remove all discs and leave this unit turned on for two to three hours. By this time, the unit will have warmed up and any condensation will have evaporated.

For European Models

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.

GROEBENZELL, GERMANY

K. MIYAGI

ONKYO EUROPE ELECTRONICS GmbH

3

Precautions—Continued

This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit.

To prevent being exposed to the laser beam, do not try to open the enclosure.

DANGER:

VISIBLE AND/OR INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT STARE INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

The label on the right is applied on the rear panel.

1.This unit is a CLASS 1 LASER PRODUCT and

employs a laser inside the cabinet.

2.To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualified personnel.

For British models

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue: Neutral Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse. If the power cord’s plug is not suitable for your socket outlets, cut it off and fit a suitable plug. Fit a suitable fuse in the plug.

Features

Amplifier

•Onkyo VL Digital Technology

•Discrete Output Stage Circuitry

•Optimum Gain Volume Circuitry

•Direct Mode

•Super Bass (On/ Off) and Tone Control

•Optical Digital Input

•Gold-Plated 4 Audio Inputs and 2 Outputs

•Subwoofer Pre Out

—CR-715DAB only—

•DC Power Out for Wireless USB Audio Transport (UWL-1)

CD Player

•Plays CDs, MP3 CDs,CD-Rs and CD-RWs

•Wolfson 192kHz/ 24-Bit D/A Converter

•VLSC (Vector Linear Shaping Circuitry)*

•25 Track Programming

•Repeat Mode

Tuner & Other

•4-Mode Program Timer (Play or Rec / Once or Every)

•Sleep Timer

•Battery-Free Memory Backup

•Headphone Jack

•Aluminium Front Panel

•RI-Dock Compatible Remote Control (iPod Control Capable)

—CR-715DAB only—

• 40 FM/DAB Presets

*VLSC and the VLSC logo are registered trademarks of Onkyo Corporation.

4

Supplied Accessories

Make sure you have the following accessories:

Remote controller and two batteries (AA/R6)

Indoor FM antenna

DAB antenna (CR-715DAB only)

Power cord

(Plug type varies from country to country.)

*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color.

Before Using the CD

Receiver

Installing the Batteries

1 Detach the battery cover by pressing the tab and pulling up the cover.

2 Insert two AA-size batteries into the battery compartment.

Carefully follow the polarity diagram (positive

(+) and negative (–) symbols) inside the battery compartment.

3 After the batteries are installed and seated correctly, attach the compartment cover.

Notes:

•If the remote controller doesn’t work reliably, try replacing the batteries.

•Don’t mix new and old batteries or different types of batteries.

•If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

•Expired batteries should be removed as soon as possible to prevent damage from leakage or corrosion.

5

Contents

Basic Operations

Getting Started
Important Safety Instructions...............................	2
Precautions .........................................................	3
Features ..............................................................	4
Supplied Accessories ..........................................	5
Before Using the CD Receiver ............................	5
Installing the Batteries .....................................	5
Contents .............................................................	6
Getting to Know the CD Receiver .......................	7
Front Panel ......................................................	7
Display.............................................................	8
Rear Panel.......................................................	9
Remote Controller .........................................	10
Using the Remote Controller .........................	11
Disc Notes .........................................................	12
Connections
Connecting Antennas ........................................	14
Connecting Speakers ........................................	16
Connecting the Power Cord ..............................	23
First Time Setup ................................................	24
Setting the Clock with the AccuClock
Function ......................................................	24
Basic Operation
Basic Operation .................................................	25
Turning On the CD Receiver .........................	25
Adjusting the Volume.....................................	25
Selecting the Input Source ............................	25
Using Headphones ........................................	25
Adjusting the Bass and Treble.......................	26
Using the Super Bass Function .....................	26
Using the Direct Function ..............................	26
Muting the Sound ..........................................	26
Changing the Input Display ...........................	27
Playing a Disc
Playing CDs.......................................................	28
Using the Remote Controller .........................	29
Displaying CD Information .............................	29
Selecting MP3 Files.......................................	30
Displaying MP3 Information...........................	32
Listening to the Radio
Listening to the Radio........................................	36
Tuning into FM Radio Stations ......................	36
Displaying Radio Information.........................	37
Receiving RDS ..............................................	37
Listening to DAB Digital Radio (CR-715DAB only) ...	38
Presetting FM Stations Automatically
(Auto Preset) ..............................................	41
Presetting FM/DAB Stations Manually ..........	42
Selecting Preset Stations ..............................	43

Clock and Timer
Setting the Clock...............................................	47
Setting AccuClock to Use a Specific
Station ........................................................	47
Setting the Clock Manually ...........................	48
Using the Timers...............................................	49
About the Timers...........................................	49
Programming the Timers ..............................	50
Turning Timers On and Off ...........................	52
Checking Timer Settings...............................	52
Using the Sleep Timer ..................................	53
Miscellaneous
Troubleshooting ................................................	54
Specifications....................................................	57

Advanced Operations
Connecting Other Components ........................	17
About Connections........................................	17
Cables and Jacks..........................................	17
Connecting a Subwoofer...............................	17
Connecting an Onkyo Cassette Deck ...........	18
Connecting an Onkyo MD recorder ..............	19
Connecting an Onkyo CD Recorder .............	20
Connecting a Component with a Digital Audio
Output (CR-715DAB only)..........................	21
Connecting an Onkyo RI Dock
(Remote Interactive Dock)..........................	22
Connecting a TV ...........................................	22
Connecting a Portable Audio Device ............	23

Memory Playback .........................................	33
Random Playback.........................................	34
Repeat Playback...........................................	34
Setting MP3 Preferences ..............................	34

Naming Presets ............................................	44
Copying Presets............................................	45
Erasing a Preset’s Name ..............................	46
Erasing Presets.............................................	46

6

Getting to Know the CD Receiver

Front Panel

1	2	3	4						5
	6	7	8	9	J	K	L	M	N	O

The page numbers in parentheses show where you can find the main explanation for each item.

ASTANDBY indicator (23, 25)

Lights up in Standby mode.

BSTANDBY/ON button (25, 48, 51, 54)

Sets the CD receiver to On or Standby.

CRemote control sensor (11)

Receives control signals from the remote controller.

DDisplay

See “Display” on page 8.

EVOLUME control (25)

Adjusts the volume level.

The volume control indicator lights up when the CD receiver is on.

FPHONES jack (25)

This stereo minijack is for connecting a pair of stereo headphones for private listening.

GLINE 2 IN jack

This stereo minijack is for connecting an audio source, such as an MP3 music player or personal computer.

HDisc tray (28)

The CD is loaded here.

IINPUT button (25, 27, 41, 43)

Used to select the input source.

JDIRECT button (26)

Used with the Direct function.

The DIRECT button’s indicator lights up when the Direct function is on.

KTONE button (26)

Used to adjust the bass and treble.

LMulti control (28, 43)

Used to select radio presets, tracks, and MP3 folders. Also used to select and set various functions and settings.

MEject [] button (28)

Ejects the loaded CD.

NStop [] button (28, 54)

Stops CD playback.

OPlay/Pause [/ ] button (28)

Starts CD playback. Pressing it during playback pauses playback.

7

Getting to Know the CD Receiver—Continued

Display
	1	2	3 4	5	6	7	8
9	J	K				L M	N	O	P

ASLEEP indicator

Lights up when the Sleep function has been set.

BMP3 indicator

Lights up when an MP3 CD is loaded.

CPCM indicator (CR-715DAB only)

Lights up when the digital input signal received by the DIGITAL IN jack is PCM. It flashes if the signal is not PCM or the CD receiver is not locked to the incoming digital signal.

DFOLDER indicator

Lights up while the number of an MP3 folder is being displayed.

EDIRECT indicator

Lights up when the Direct function is on.

FS.BASS indicator

Lights up when the Super Bass function is on.

GMUTING indicator

Flashes while the CD receiver is muted.

HPlayback mode indicators

1FOLDER: Lights up when 1-folder playback is selected.

MEMORY: Lights up when memory playback is selected.

RANDOM: Lights up when random playback is selected.

REPEAT: Lights up when repeat playback is selected for all tracks.

REPEAT 1: Lights up when repeat playback is selected for one track.

IPlay and pause / indicators

The Play indicator lights up for playback. The Pause indicator lights up while playback is paused.

JTIMER indicators

Show the status of the timers.

TIMER: Lights up when a timer has been programmed.

1, 2, 3, 4: Light up when a timer has been programmed.

: Lights up when a timer has been programmed for recording.

KTuning indicators

AUTO: Lights up when Auto Tuning is selected, and disappears when Manual Tuning is selected.

: Lights up when the CD receiver is tuned to a radio station.

DAB (CR-715DAB only): Lights up when the CD receiver is tuned to a DAB digital radio station.

FM ST: Lights up when the CD receiver is tuned to a stereo FM station.

RDS (European model only): Lights up when the CD receiver is tuned to a radio station that supports RDS (Radio Data System).

LFILE indicator

Lights up when an MP3 file number is being displayed.

MTRACK indicator

Lights up when a CD track number is being displayed.

NTITLE, ARTIST and ALBUM indicators

TITLE lights up when the title (ID3 tag) of an MP3 track is being displayed.

ARTIST lights up when the artist name from an MP3 track (ID3 tag) is being displayed. ALBUM lights up when the album name from an MP3 track (ID3 tag) is being displayed.

ODISC, TOTAL, and REMAIN indicators

These indicators light up when the total time or the remaining disc or track time is being displayed.

PMessage area

Various information is displayed here, including radio preset numbers, tuning frequency, current time, volume level, sleep time, mode settings, and so on.

8

Getting to Know the CD Receiver—Continued

Rear Panel

1 2 3*

4 5 6* 7

8 9* J

K * CR-715DAB only

The page numbers in parentheses show where you can find the main explanation for each item.

ALINE 1 IN (22)

This analog audio input is for connecting a component with an analog output, such as a TV, or a turntable with a built-in phono equalizer.

BMD/TAPE IN/OUT (18, 19)

These analog audio inputs and outputs are for connecting a recorder with an analog input and output, such as a MiniDisc recorder or cassette deck.

CDAB ANTENNA (CR-715DAB only) (14)

This jack is for connecting a DAB antenna.

DFM ANTENNA (14, 15)

This jack is for connecting an FM antenna.

ESUBWOOFER PRE OUT (17)

This jack is for connecting a powered subwoofer.

FDC OUT (CR-715DAB only)

This jack is for powering the Onkyo UWL-1 Wireless USB Audio Transport. Only connect the special cable included with the UWL-1. Do not connect any other cable, as it will cause a malfunction. See the UWL-1’s instruction manual for more information.

GSPEAKERS (16)

These terminal posts are for connecting speakers.

H REMOTE CONTROL (18–22)

This (Remote Interactive) jack can be connected to an jack on another Onkyo component. The CD receiver’s remote controller can then be used to control that component. To use , you must make an analog audio connection (RCA) between the CD receiver and the other component, even if they are connected digitally.

IOPTICAL DIGITAL IN (CR-715DAB only) (21)

This optical digital audio input can be used to connect a component with an optical digital output, such as a CD recorder, MD recorder, games console, satellite tuner, or personal computer. Use a commercially available optical digital audio cable to make the connection.

JDOCK/CDR IN/OUT (20, 22)

These analog audio inputs and outputs are for connecting a recorder with an analog input and output such as a CD recorder, or an Onkyo RI Dock.

KPower cord (23)

See pages 14–23 for connection information.

9

	Getting to Know the CD Receiver—Continued
	Remote Controller
			The page numbers in parentheses show where you can
			find the main explanation for each item.
			A STANDBY/ON button (25, 51)
			This button is used to set the CD receiver to On or
	A	M	Standby.
			B SLEEP button (53)
	B
		N	Used to set the Sleep timer, which turns off the CD
			receiver after a specified time.
	3		C Number buttons (29, 31, 33, 43, 44, 50)
			Used to select tracks and radio presets. Also used to
		O	set the clock manually, set the timers, and enter
			names for radio presets. Can also be used with an
		P	Onkyo RI Dock or CD recorder.
			D TIMER button (24, 47, 48, 50, 52)
		Q	Used to set the timers and clock.
			E MENU/NO/CLEAR button (27, 34, 40–42,
	4	R	44–46)
	5	S	Used with various functions and settings for select-
	6		ing, cancelling, and deleting. With an Onkyo CD
		T	recorder, it works as a clear button. With an Onkyo
	7		RI Dock, it works as a mode button.
			F Previous/Next [		]/[	] and
	8
			[	PRESET]/[PRESET		] buttons (29, 38,
			40, 43)
			Used to select the previous or next track or radio
			preset. Can also be used with an Onkyo RI Dock or
	9		CD recorder. With an Onkyo cassette deck, they
			work as rewind and fast forward buttons.
	J	U	G Rewind/Fast Forward [			]/[	] and
			[	TUN]/[TUN	] buttons (29, 36, 39, 47)
			Used to rewind or fast forward CD playback. Can
			also be used with an Onkyo RI Dock or CD
	K	V	recorder. Also used to tune the radio and edit preset
			names.
	L		H CD control buttons (29)
				: Pauses playback.
				: Stops playback.
				: Starts playback.
			I VOLUME [ / ] buttons (25, 29)
			Adjust the volume level.
			J S.BASS button (26)
			Sets the Super Bass function.
			K Onkyo RI Dock and CD recorder control
			buttons
				: Pauses playback or recording.
				: Stops playback or recording.
				: Starts playback or resumes recording.

10

Getting to Know the CD Receiver—Continued

LOnkyo MD recorder and cassette deck control buttons

For twin cassette decks, only Deck B can be controlled.

: Plays side B (cassette deck).

: Pauses playback or recording (MD).

: Stops playback, recording, fast-forward, or rewind.

: Plays side A.

MCLOCK CALL button (48)

Calls up the clock to display the day and time.

NINPUT [ ]/[] buttons (25, 27, 41, 43)

Used to select the input source.

ODISPLAY button (29, 32, 37, 39, 44, 48)

Used to change the information shown on the display. Also used to select characters when naming radio presets. Can also be used with an Onkyo CD recorder. With an Onkyo RI Dock, it works as a backlight button.

PFOLDER button (30, 31, 32, 35)

Used to select MP3 folders.

QREPEAT button (34)

Sets repeat playback. Can also be used with an Onkyo RI Dock or CD recorder. With an Onkyo cassette deck, it works as a reverse mode button.

RTONE button (26)

Used to adjust the bass and treble.

SYES/MODE/SHUFFLE button (32–34, 36)

Used with various functions and settings for confirming, selecting modes, and selecting shuffle playback.

TENTER button

Used to confirm various functions and settings. Can also be used with an Onkyo RI Dock or CD recorder.

UMUTING button (26)

Mutes the output of the CD receiver.

VTUNER/BAND button (36, 38, 41, 42, 43)

Selects FM, or DAB radio as the input source.

Using the Remote Controller

When you operate the remote controller, point it at the CD receiver’s remote control sensor, as shown below.

Remote control sensor

	m
	5
.
x
Approft
)
.
(16

CD receiver

Notes:

•The remote controller may not work reliably if the CD receiver is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in mind when installing.

•If another remote controller of the same type is used in the same room, or the CD receiver is installed close to equipment that uses infrared rays, the remote controller may not work reliably.

•Don’t put anything, such as a book, on the remote controller because the buttons may be pressed inadvertently, thereby draining the batteries.

•The remote controller may not work reliably if the CD receiver is installed in a rack behind colored glass doors. Keep this in mind when installing.

•The remote controller will not work if there’s an obstacle between it and the CD receiver’s remote con-

trol sensor.

11

Disc Notes

Supported Discs

The CD receiver supports the following discs.

Disc	Logo	Format or file type
Audio CD		PCM
		Audio CD, MP3
CD-R
		MP3
		Audio CD, MP3
CD-RW
		MP3

CD Extra

Audio CD (Session 1),

MP3 (Session 2)

•Some audio CDs use copy protection that doesn’t conform to the official CD standard. Since these are nonstandard discs, they may not play properly in the CD receiver.

•The CD receiver supports CD-R and CD-RW discs. However, some CD-R and CD-RW discs may not work properly for any of the following reasons: disc burner characteristics, disc characteristics, the disc is damaged or dirty. See the manual supplied with your disc burner for more information. Condensation or dirt on the optical pickup lens can also affect playback.

•The CD receiver supports 8 cm and 12 cm discs.

•The CD receiver does not support disc types not listed.

•Don’t use discs with an unusual shape, such as those shown below, as you may damage the CD receiver.

•Don’t use discs that have residue from adhesive tape, rental discs with peeling labels, or discs with custommade labels or stickers. Doing so may damage the CD receiver and you may not be able to remove the disc properly.

Discs Made on Personal Computers

Discs made on personal computers, including those of a compatible format, may not work properly in the CD receiver because of incorrect settings in the disc burning software. Check the manuals supplied with your disc burning software for additional compatibility information.

MP3 Compatibility

•MP3 discs must be ISO 9660 Level 1 or Level 2, Romeo or Joliet compliant. Supported formats: Mode 1, Mode 2 XA Form 1.

•Folders can be up to eight levels deep.

•MP3 files must be MPEG-1/MPEG-2 Audio Layer 3 format with a sampling rate of between 8 kHz and 48 kHz and a bit-rate of between 8 kbps and 320 kbps (128 kbps recommended). Incompatible files cannot be played.

•Constant bit rate MP3 files are recommended, however, variable bit-rate (VBR) MP3 files between

8 kbps and 320 kbps are supported. (Playing times may not display correctly.)

•MP3 files must have a “.mp3” or “.MP3” file name extension. MP3 files without the proper extension will not be recognized. To prevent noise and malfunction, do not use these extensions for other types of files.

•The CD receiver supports up to 499 MP3 files and folders. Files and folders in excess of this cannot be played. Note that if the file and folder structure is very complicated, the CD receiver may not be able to read or play all of the MP3 files on the disc.

•Disc, file, and folder names may contain up to 32 characters.

•The maximum time that can be displayed for a single file is 99 minutes and 59 seconds.

•The remaining time cannot be displayed when playing MP3 files.

•MP3 file and folder names (excluding the extension) are shown on the display.

•Multisession discs are supported, however, some multisession discs may take a long time to load and some may not load at all. When burning CDs, we recommend that you use a single-session (disc-at-once), and select “Disc Close.”

•Normally, the music in the audio session of a CD Extra disc is played. However, you can set the CD receiver so that it plays any MP3 files in the data session of a CD-R/RW disc instead. If the data session contains no MP3 files, the audio session will be played regardless. See “Setting MP3 Preferences” on page 34 for more information.

•The Emphasis is not supported.

12

Disc Notes—Continued

•The following ID3 tags are supported: versions 1.0/1.1 and 2.2/2.3/2.4. Versions 2.5 and later are not supported. Normally, version 2.2/2.3/2.4 tags have priority and will be displayed regardless of the ID3 VER 1 preference on page 35.

•For ID3 version 2 tags, the tag information recognized will be those embedded in the beginning of the file. We recommend that you include only title, artist name, and album name information in ID3 tags. Compressed, encrypted, and unsynchronized ID3 tags cannot be displayed.

Note:

With CD-ROM, CD-R, and CD-RW discs that contain many files and folders and files other than MP3s, it may take a long time to read the disc. We recommend that you include only MP3 files on your discs, use about 20 folders, and limit folder nesting to three levels deep.

Disc Content Organization

■CD

CDs contain tracks.

Track 1		Track 2		Track 3		Track 4		Track 5

Audio CD

■MP3

MP3 discs contain MP3 files organized into folders.

Folder 1

Folder 2

File 1

File 2

File 3

File 1

File 2

MP3 (CD-R/CD-RW)

Handling Discs

•Never touch the underside of a disc. Always hold discs by the edge, as shown.

Underside

• Never attach adhesive tape or sticky labels to discs.

Cleaning Discs

•For best results, keep your discs clean. Fingerprints and dust can affect the sound quality and should be removed as follows. Using a clean soft cloth, wipe from the center outwards, as shown. Never wipe in a circular direction.

•To remove stubborn dust or dirt, wipe the disc with a damp soft cloth, and then dry it with a dry cloth.

•Never use solvent-based cleaning fluids, such as thinner or benzine, commercially available cleaners, or antistatic sprays intended for vinyl records, as they may damage the disc.

Storing Discs

•Don’t store discs in places subject to direct sunlight or near heat sources.

•Don’t store discs in places subject to moisture or dust, such as in a bathroom or near a humidifier.

•Always store discs in their cases and vertically. Stacking, or putting objects on unprotected discs may cause warping, scratches, or other damage.

13

Connecting Antennas

This section explains how to connect the supplied indoor FM antenna and DAB antenna (CR-715DAB only), and how to connect commercially available outdoor FM antenna.

The CD receiver won’t pick up any radio signals without an antenna connected, so you must connect the antenna to use the tuner.

DAB antenna jack
(CR-715DAB only)	FM antenna jack

Connecting the DAB Antenna (CR-715DAB only)

1 Screw the supplied DAB antenna’s plug onto the DAB ANTENNA jack.

Once the CD Receiver is ready for use, you’ll need to tune into a DAB station and adjust the position of the DAB antenna to achieve the best possible reception.

Connecting the Indoor FM Antenna

2

Use thumbtacks or something similar to

fix the DAB antenna into position.

The supplied indoor FM antenna is for indoor use only.

1 Attach the FM antenna, as shown.

Insert the plug fully into the jack.

Once the CD receiver is ready for use, you’ll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception.

2 Use thumbtacks or something similar to fix the FM antenna into position.

Thumbtacks, etc.

Caution: Be careful that you don’t injure yourself when using thumbtacks.

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead (see page 15).

14

Connecting Antennas—Continued

Connecting an Outdoor FM Antenna

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.

Notes:

•Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft.

•For best results, install the outdoor FM antenna well away from tall buildings, preferably with a clear line of sight to your local FM transmitter.

•Outdoor antenna should be located away from possible noise sources, such as neon signs, busy roads, etc.

•For safety reasons, outdoor antenna should be situated well away from power lines and other high-voltage equipment.

•Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock hazards.

■ Using a TV/FM Antenna Splitter

It’s best not to use the same antenna for both FM and TV reception, as this can cause interference problems. If circumstances demand it, use a TV/FM antenna splitter, as shown.

TV/FM antenna splitter

To CD receiver

To TV (or VCR)

15

Connecting Speakers

Connecting Your Speakers

•Connect the right speaker to the CD receiver’s right (R) SPEAKERS terminals. Connect the left speaker to the left

(L) SPEAKERS terminals.

•Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the CD receiver. Connect the negative (–) terminal on each speaker to the corresponding negative (–) terminal on the CD receiver. Use the red wires to connect the positive (+) terminals.

Right speaker

Left speaker

Red wires	Strip about 15 mm (5/8") of insulation from the ends of the speaker
	cables, and twist the bare wires tightly. Unscrew the terminal. Fully
	insert the bare wire, making sure that it’s touching the threaded shaft in
	the center. Screw the terminal tight.

R

L

Speaker cable

SPEAKERS

•Connect only speakers with an impedance of between 4 and 16 ohms. Connecting a speaker with a lower impedance may damage the speaker.

•Be careful not to short the positive and negative wires. Doing so may damage the CD receiver.

•Do not connect both speaker cables to the same L or R terminals (Fig. 1). Do not connect more than two speaker terminals to each speaker (Fig. 2).

Fig. 1

Fig. 2

R	L	L
	R

SPEAKERS

16

Connecting Other Components

About Connections

•Before making any connections, read the manuals supplied with your other components.

•Don’t connect the power cord until you’ve completed and double-checked all connections.

Connection Color Coding

RCA-type audio connections are usually color-coded: red and white. Use red plugs to connect right-channel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”).

	Analog audio
Left (white)	cable
	Left (white)
Right (red)	Right (red)

Cables and Jacks

No connecting cables are included with the CD receiver.

• Push plugs in all the way to make

Right!

good connections (loose connec-

tions can cause noise or malfunc-

tions).

• To prevent interference, keep

Wrong!

audio cables away from power

cords and speaker cables.

Optical Digital Jack (CR-715DAB)

The CD receiver’s optical digital jack has a shutter-type cover that opens when an optical plug is inserted and closes when it’s removed. Push the plug in all the way.

Caution: To prevent shutter damage, hold the optical plug straight when inserting and removing.

Note:

Do not put anything on top of the CD receiver, as it may interfere with proper ventilation.

Cable	Jack		Description
Analog audio cable	R	L	This cable carries analog audio.
(RCA)

Optical digital audio	OPTICAL	This cable carries digital audio.
cable (CR-715DAB
only)
Stereo miniplug		This cable carries analog audio.
cable

Connecting a Subwoofer

The CD receiver has a SUBWOOFER PRE OUT jack for connecting a powered subwoofer (i.e., a subwoofer with a built-in amplifier).

CD receiver

Powered subwoofer

: Signal flow

17

Connecting Other Components—Continued

Connecting an Onkyo Cassette Deck

The following diagram shows how to connect an optional Onkyo cassette deck.

Connect the CD receiver’s MD/TAPE OUT jacks to the cassette deck’s INPUT (REC) jacks, and connect the CD receiver’s MD/TAPE IN jacks to the cassette deck’s OUTPUT (PLAY) jacks.

	CD receiver’s	Onkyo cassette deck’s
	rear panel
		rear panel

LINE 1

IN	Red
OUT	White
MD/	Analog audio cables (RCA)
TAPE
IN	White

INPUT OUTPUT

(REC) (PLAY) REMOTE CONTROL

L

R

OUT

Red

DOCK/

CDR

IN

R L

What can you do with?

White Red Red White

cable supplied with the Onkyo cassette deck

• Connecting an Onkyo cassette deck to the CD receiver with an cable allows you to control the cassette deck with the CD receiver’s remote controller. In addition, when playback is started on the cassette deck, the CD receiver will automatically select it as the input source.

•To use, you must connect the Onkyo cassette deck to the CD receiver with an cable and an analog audio cable (RCA). In addition, the Input Display for the MD/TAPE jacks must be set to “TAPE.” Since this is the default setting, unless you’ve changed it, it can be left as it is (see page 27).

• Some

-capable components have two

jacks. They’re both the same, so you can use either one. The extra jack

is for connecting additional-capable components.

18