One for All URC-8811, URC-8011, URC-3605, URC-6131, Big Easy URC-3300, URC-4330, URC-4021, URC-5705, URC-4041 User Manual

Size:
785.47 Kb
Download

TABLE OF CONTENTS

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features And Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Programming Device Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Searching For Your Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Programming A Master Power Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Programming The Power Key For The Master Power Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Operating The Master Power Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Clearing The Master Power Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Programming Favorite Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Locking Volume Control To One Mode

(Global Volume Lock). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Unlocking Volume Control For A Single Device

(Individual Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Unlocking All Volume Control

(Restoring Default Setting ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Clearing Custom Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Restoring Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Instructions To The User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Lifetime Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Setup Codes For Cable Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Setup Codes For Cable Box/PVR (or DVR) Combos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Setup Codes For DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Setup Codes For DVD Player/VCR Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Setup Codes For PVRs (or DVRs). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setup Codes For Satellite Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setup Codes For Satellite Receiver/PVR (or DVR) Combos. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setup Codes For TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setup Codes For TV/DVD Player Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Setup Codes For TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Setup Codes For TV/VCR/DVD Player Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Setup Codes For VCRs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

2

INTRODUCTION

The One For All 3 Device Universal Remote Control (URC-3021)is designed to remotely operate up to three home entertainment devices. It also features intuitive andeasy-to-usekeys for instant control of DVD and PVR (or DVR) components. Moreover, its sophisticated technology will allow you to consolidate your original home entertainment remote controls into oneeasy-to-useproduct. Advanced features include:

Intuitive buttons to allow easy access to functions and menus on your DVD player, PVR (or DVR), and Cable/Satellite devices

Direct code setup for easy device programming

Step-and-Setcode search and Code Verificationfor an alternate way to program devices

Power Macro for master on/off control of all of your equipment with a single keystroke

Volume Lock/Unlock feature to lock or unlock the volume control to one mode or individual modes

Device Key Re-Assignment to remotely control a second (duplicate) device

Channel Scan and Favorite Channel Scanfor easy channel surfing

Color-codedkeys to quickly locate popular functions

Extensive code library for popular video devices including DVD players and PVRs (or DVRs)

The URC-3021remote control requires two (2) new AAA alkaline batteries (not included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference.

3

FEATURES AND FUNCTIONS

Use the illustration below to locate features on the One For All 3 Device Universal Remote Control (URC-3021)and then study theKey Charts (on the next two pages) to learn how they function.

To find out what type of devices can be controlled by each device key after programming, see the Device Table on page 6.

4

Key Charts

When the LED (red light) blinks, the remote control is working and (after programming) is sending signals.

Press DVD/VCR,CBL/SAT, orTV once to select a desired home entertainment device to control. Also see theDevice Table on page 6.

Press POWER once to turn on or off the selected device. For master power control, seeProgramming A Master Power Macro on page 10.

Use the keypad (1 ~9 and0) to directly select channels (e.g.,009 or031).

Use TV/VID to switch the TV’s input to view TV or video programs.

Press ENTER once after entering the channel numbers on some TVs.

Use GUIDE to display your selected device’s program guide or setup menu.

Press MENU once to display your selected device’s main menu.

Use INFO to display the current channel and program oron-screendirectory.

Use EXIT to exit from your selected device’s guide or menu.

Use the Cursor Keys to move the cursor in the program guide and menu screens.

Use SELECT (OK) to choose options from your selected device’s menu or guide.

Press LAST once to recall the last channel.

Use FAV to scan all channels, or after programming, to scan up to10 favorite channels.

Use CH(orCH) to select the next higher (or lower) channel.

Press SUBTITLE/CC once to display (or turn off) subtitles or closed captions,if available on your DVD player or cable/satellite service.

For a PVR (or DVR), press PVR MENU once to display a list of your recorded shows.

Press MUTE once to turn the sound off or on.

Use VOL(orVOL) to raise (or lower) the sound volume.

5

Use REW, PLAY, FWD, PAUSE,or STOPto control your VCR, PVR (or DVR), or DVD player.

For a DVD player, use SKIP F. orSKIP R. to view the next or previous chapter.

For a VCR, PVR (or DVR), or VOD (if available), use SCAN- orSCAN+ to quickly scan forward or back through a video program. UseREPLAY for an instant replay. UseQUICK SKIP to advance the video program a preset amount (as set on your device).

Press REC twice to record a VCR or PVR (or DVR) program.

Use SLEEP to set the sleep timer on a selected device if equipped with this feature.

Use SET for all programming sequences.

Device Table

NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 8.

After programming, the One For All 3 Device Universal Remote Control will be able to control the following types of devices:

DEVICE KEY

CONTROLS THESE TYPES OF DEVICES

DVD Player

VCR

• PVR (or DVR)

TV/DVD Player Combo

VCR/DVD Player Combo

TV/VCR Combo

TV/VCR/DVD Player Combo

VCR/DVD Player Combo

Cable Box (or Converter)

Cable Box/PVR (or DVR) Combo

• Satellite Receiver

• Satellite Receiver/PVR (or DVR) Combo

• Television

6

INSTALLING BATTERIES

1.On the remote control’s back, push the tab and lift off the battery cover.

2.Obtain two (2) new AAA alkaline batteries. Match the + and – marks on the batteries to the + and – marks in the battery case, then insert the new batteries.

3.Press the battery cover back into place. The tab should click when the cover is locked.

4.Test the remote control by pressing any mode key (e.g.,

TV). If the batteries are inserted correctly, theLED (red light) will blink.

NOTE: When batteries need replacement, the remote control will stop operating. Remove the old batteries and insert new ones within 10 minutes to ensure all of your programming information is restored.

7

PROGRAMMING DEVICE CONTROL

The One For All 3 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola cable box. To control devices other than the default brands, perform the following steps; otherwise skip this section:

1.Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2.On the remote control,press a device key once (i.e., DVD/VCR,

CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions.

NOTE: To program control of a DVD Player, DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD/VCR once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3.Press and hold SET until theLED (red light) blinks twice, then releaseSET.

4.Use the Manufacturer’s Codes (starting on page 18) to locate the type of device and brand name and then enter the firstfour-digitcode for your device. If performed correctly, theLED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.

5.Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn’t work, try

Searching For Your Code on next page.

NOTE: If the device does not have a POWER key, pressPLAY.

6.Repeat steps 1 through 5 for each device you want to con-

trol. For future reference,write down each working device code in the following boxes:

DVD/VCR Code:

Device Type:__________________

CBL/SAT Code:

Device Type:__________________

TV Code:

Device Type:__________________

8

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code.

NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and insert the required media.

For example, to search for a code for your TV:

1.

On the remote control, press TV once.

2.Press and hold SET until theLED (red light) blinks twice, then releaseSET.

3.Enter 9 -9 -1. TheLED will blink twice.

4.Aim the remote control at the TV and slowly alternate between pressing POWER andTV. Stop when the TV turns off (after pressingPOWER). If the device does not have a Power

key, you can substitute another function, such as digits 0 ~9 ,

CH, orPLAY).

NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.

5.To lock in the code, press and release SET. TheLED will

blink twice.

6.To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate device key for the device you are searching for.

CHECKING THE CODES

If you have set up the remote control using the Searching For Your Code procedure as above, you may need to find out whichfour-digitcode is operating your equipment. For example,to find out which code is operating your TV:

1.

On the remote control, press TV once.

2.Press and hold SET until theLED (red light) blinks twice, then releaseSET.

3.

Enter 9 -9 -0. TheLED will blink twice.

4.To view the code for the first digit, press 1 once.Wait 3 seconds, count theLED blinks (e.g., three blinks = 3) and write down the number in the leftmost box in the TV code boxes on page 8.

NOTE: If a code digit is “0”, the LED will not blink.

9

5.

Repeat step 4 (on the previous page) three more times for

 

remaining digits. Use 2 for the second digit,3 for the third

 

digit, and 4 for the fourth digit.Write down the code dig-

 

its in the remaining TV code boxes on page 8.

6.To check for codes of other devices, repeat steps 1 through 5 (starting on the previous page), but substitute the appropriate device key for each device you are checking.Write down the device’s code digits in the appropriate code boxes on page 8.

PROGRAMMING A MASTER POWER MACRO

In its default state, the POWER key on the One For All 3 Device Universal Remote Control will individually power your home entertainment devices on or off. However, you can also program aMaster Power Macro onto thePOWER key that will sequentially turn on or off all the devices with a single key press.

Programming The Power Key For The Master Power Macro

1.Press and hold SET until theLED (red light) blinks twice, then releaseSET.

2.Enter 9 -9 -5. TheLED will blink twice. Then pressPOWER

once.

3.For the first device you want in the power-onsequence, press its device key (e.g.,CBL/SAT) once.

4.Repeat step 3 up to two more times to add desired devices to the power-onsequence (e.g.,DVD/VCR andTV).

5.To save the settings and exit the program, press and hold SET until theLED blinks twice, then releaseSET.

Operating The Master Power Macro

1.After programming, point the remote control at the devices and press POWER for at least 2 seconds to sequentially turn on (or off) your devices.

NOTE: When POWER is pressed for less than 2 seconds, a power command will only be sent to thecurrently-selecteddevice. This allows you to still individually power devices on or off.

2.Devices will turn on (or off) according to your programmed sequence.

NOTE: The currently-selecteddevice will always turn on or off first, followed by the remaining programmed sequence. After the master power sequence has been completed, the remote control will be set to control the firstpowered-ondevice.

NOTE: If one or more devices does not have a POWER key, the power off/on sequence may be slightly delayed when the remote control signals the device(s). This action is normal.

continued on next page...

10

PROGRAMMING A MASTER POWER MACRO (cont’d)

Clearing The Master Power Macro

1.Press and hold SET until theLED (red light) blinks twice, then releaseSET.

2.Enter 9 -9 -5. TheLED will blink twice. Then pressPOWER

once.

3.Press and hold SET until theLED blinks twice, then releaseSET. TheMaster Power Macro is now cleared.

RE-ASSIGNINGDEVICE KEYS

The One For All 3 Device Universal Remote Control can be set to control a DVD player and a VCR (or a PVR) or a second DVD player by re-assigningthe unusedCBL/SAT key as follows:

1.On the remote control, press and hold SET until theLED (red light) blinks twice, then releaseSET.

2.

Enter 9 -9 -2. TheLED will blink twice.

3.

Press DVD/VCR once.

4.Press CBL/SAT once. The LED will blink twice. The CBL/SAT key is now ready to be set up to control your VCR (or PVR) or second DVD player. See Programming Device Controlon page 8.

NOTE: Only one device can be assigned to an unused device key at a time.

USING CHANNEL SCAN

In the CBL/SAT or TV mode, use the FAV key to start a 3-second scan of all channels. Or, if programmed, use the FAV key to scan only your favorite channels to view a desired channel (see Programming Favorite Channel Scanon next page. )

1.Press CBL/SAT orTV once.

2.

Press FAV once.

If Favorite Channel Scan has been set up,scanning of favorite channels will start with up to 100 channel changes or until stopped by pressing any key.

If Favorite Channel Scan has not been set up, scanning will start with the current channel, and continue up to

100 channel changes or until stopped by pressing any key.

3.To stop scanning channels at any time, press any key once.

11

PROGRAMMING FAVORITE CHANNEL SCAN

In the CBL/SAT orTV mode, you can store a list of up to 10 favorite channels, in any order, that will be immediately scanned whenFAV is pressed (seeUsing Channel Scan on the previous page).

NOTE: Favorite channels can only be programmed for one mode. After programming, if FAV is pressed while in another mode, the remote control will start scanning all channels instead (if applicable to the selected device).

1.On the remote control, press CBL/SAT orTV once.

2.Press and hold SET until theLED (red light) blinks twice, then releaseSET.

3.

Enter 9 -9 -6. TheLED will blink twice.

4.

Use the keypad to enter a favorite channel number (e.g.,

 

031). Then pressSET once.

NOTE: If the original remote control required pressing an Enter key to change the channel, also press the ENTER key after the channel number (e.g.,0 -3 -1 -ENTER). On some satellite receivers and cable boxes, you may need to press theSELECT (OK) key instead ofENTER.

5.If desired, repeat step 4 for each channel to be stored, up to a total of 10 channels.

NOTE: If you try entering more than 10 channels, the remote control will automatically exit programming. To change your favorite channel list at this point, you will first need to delete the existing list by performing the steps in “Clearing Custom Programming” on page 14. Then, perform the instructions in this section once again.

6.To exit programming with less than 10 favorite channels stored, press and hold SET until theLED blinks twice. Otherwise, the remote control will automatically exit the program after 10 channels have been stored.

CHANGING VOLUME LOCK

The One For All 3 Device Universal Remote Control is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a device’s volume will be locked to one mode (e.g., to control TV volume in all other modes).After that, if desired, you can performIndividual Volume Unlock on a selected device to set its volume control for independent operation.

Locking Volume Control To One Mode

(Global Volume Lock)

1.Press and hold SET until theLED (red light) blinks twice, then releaseSET.

continued on next page...

12

CHANGING VOLUME LOCK (cont’d)

Locking Volume Control To One Mode

(Global Volume Lock)

2.Enter 9 -9 -3 and then press any mode key once (e.g.,TV).

The LED will blink twice.

3.Now, when you press VOL,VOL, orMUTE, the volume of the selected device (e.g.,TV) will be controlled, regardless of the mode you have selected.

Unlocking Volume Control For A Single Device (Individual Volume

Unlock)

1.After performing Global Volume Lock (above),press a desired mode key where you want volume to be unlocked (e.g.,DVD/VCR) and controlled within its own mode.

2.Press and and hold SET until theLED (red light) blinks twice, then releaseSET.

3.Enter 9 -9 -3 and then pressVOLonce. TheLED will

blink four times.

4.If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked.

5.After selecting a device that has volume unlocked (e.g., DVD/VCR), pressingVOL,VOL, orMUTE will control the

device’s volume only in its own mode.

Unlocking All Volume Control (Restoring Default Setting)

NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g., TV volume control in TV mode, VCR volume in DVD/VCR mode, etc.).

1.On the remote control, press and hold SET until theLED (red light) blinks twice,then releaseSET.

2.Enter 9 -9 -3 and then pressVOLonce. TheLED will

blink four times.

3.Volume will again be independently controlled according to its default states for all programmed devices.

13

CLEARING CUSTOM PROGRAMMING

The One For All 3 Device Universal Remote Control contains an Operational Feature Reset program. If desired, you can use it to clear custom programming, except your setup codes and reassigned device keys, and reset them to original factory settings.Also seeRestoring Factory Default Settings below.

IMPORTANT: Executing this program will erase all your custom settings for

Power Macro, Favorite Channels, and Volume Lock.

1.Press and hold SET until theLED (red light) blinks twice, then releaseSET.

2.Enter 9 -8 -0. TheLED will blink twice. The remote control will return to normal operation.

RESTORING FACTORY DEFAULT SETTINGS

The One For All 3 Device Universal Remote Control also contains a Factory Reset program that you can use to reset all custom settings and setup codes to original factory settings.Also seeClearing Custom Programming above.

IMPORTANT: Executing this program will erase all your custom settings for Power Macro, Favorite Channels, Volume Lock, Reassigned Devices, and all device settings.

1.Press and hold SET until theLED (red light) blinks twice, then releaseSET.

2.Enter 9 -8 -1. TheLED will blink twice. The remote control will return to normal operation.

14

TROUBLESHOOTING

PROBLEM:

LED (red light) does not blink when you press a key.

SOLUTION:

Replace batteries with two new AAA alkaline batteries.

PROBLEM:

LED blinks when you press a key, but home entertain-

 

ment device does not respond.

SOLUTION:

Make sure the remote control is aimed at your home

 

entertainment device and is not farther than 15 feet

 

away.

PROBLEM:

The unit does not control home entertainment devices

 

or commands are not working properly.

SOLUTION:

Try all listed codes for the device brands being set up.

 

Make sure they can be operated with an infrared remote

 

control.

PROBLEM:

Changing channels does not work.

SOLUTION:

If original remote required pressing ENTER or SELECT to

 

change channels,press ENTER orSELECT on this remote after

 

entering the channel number.

PROBLEM:

Tried Searching For Your Code method and still could not

 

find a working code.

SOLUTION:

Clear the device key as follows: Press and hold SET until

 

the LED (red light) blinks twice, then release. Next enter

 

9 -9 -2. Then press the device key to be cleared twice.

 

Now repeat the Searching For Your Code method on page

 

9.

PROBLEM:

CHandCHdo not work for your RCA TV.

SOLUTION:

Due to RCA design (1983-1987),only the original

 

remote control will operate these functions.

PROBLEM:

No remote control of volume.

SOLUTION:

See Changing Volume Lock on page 12 to lock/unlock

 

volume.

For assistance, please contact us in any of the following ways:

E-mail:ofasupport@ueic.com

Internet: http://www.oneforall.com

Consumer Help Line: (330) 405-8612

INSTRUCTIONS TO THE USER

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase separation between equipment and receiver.

Connect equipment into an outlet or a circuit different from that to which the receiver is connected.

Consult dealer or experienced radio/TV technician for help.

15

LIFETIME WARRANTY

One For ALL ("OFA") warrants this product to be free from defects in materials and workmanship, under normal use, throughout the period of the product’s ownership by the original purchaser. This warranty does not cover damages or failures caused by products or services not supplied by OFA, or which result from accident, misuses, abuse, neglect, mishandling, misapplication, faulty installation, set-upadjustment, improper maintenance, alteration, maladjustment of consumer controls, modifications, commercial use, or that is attributable to acts of God.

There are no express warranties except as listed above. OFA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING

FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF

WARRANTY,ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE,ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion or limitation of incidental or consequential damagers, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

To obtain warranty service for a defective product, please return the product, preferably in the original carton, along with your purchase receipt, to the store of original purchase for the first 90 days.A note detailing the complaint would be helpful. The store, at its option, will replace or repair this product if found to be defective.

If the unit has been purchased more than 90 days ago, please return it to CT Global Inc. 8918 Stone Green Way, Louisville, KY 40220 together with the original receipt and $3.95 to cover postage and handling. It will be repaired or replaced at the manufacturer’s option. The manufacturer reserves the right to substitute a currently manufactured model with equal or superior features.

One For All: (330) 405-8655

URC-3021

March 2004

16

ADDITIONAL INFORMATION

As you update your home entertainment system, One For All® has a universal remote control that will fit your needs. Look for these exciting products at a retailer near you:

One For All Access 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-3605One For All Big Easy3-Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-3300

One For All DVD Expert 4-Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-4041One For All Big Easy4-Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-4330One For All Access 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-4605One For All Access 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-5705One For All 4 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-4021One For All 3 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-3021

One For All PVR 6-Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-6131One For All6-DeviceHome Theater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-6011One For All8-DeviceHome Theater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .URC-8011

One For All 8L-DeviceHome Theater

With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-8811

One For All A/V LCD 8 Device

With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-8910

One For All IR/RF LCD 8 Device

With Learning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-9910

One For All 8 Device Home Theater Remote

Powered By Kameleon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . URC-9960

ONE FOR ALL® is the registered trademark of Universal Electronics Inc.

Computime International Ltd. is the Licensee of the ONE FOR ALL® brand for

USA and Canada.

Copyright 2004 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc.

The One For All® 3 Device Universal Remote Control is compatible for use in

North America, excluding Mexico.

This One For All® 3 Device Universal Remote Control is covered by one or more of the following US Patents:

6,587,067 6,496,135 5,515,052 5,959,751

6,587,067 5,481,256

17

MANUFACTURER’S CODES

Setup Codes for Cable Boxes

Americast

0899

 

 

Philips

0305, 0317

Bell South

0899

 

 

Pioneer

0877, 1877, 0144, 0533

Director

0476

 

 

Pulsar

0000

General Instrument

0476, 0810, 0276

 

 

Quasar

0000

GoldStar

0144

 

 

Runco

0000

Hamlin

0009

 

 

Samsung

0144

Jerrold

0476, 0810, 0276

 

 

Scientific Atlanta

0877, 1877, 0477

Memorex

0000

 

 

Sony

1006

Motorola

0476, 0810, 0276

 

 

Supercable

0276

Pace

0237

 

 

Toshiba

0000

Panasonic

0000, 0107

 

 

Zenith

0000, 0525, 0899

Paragon

0000

 

 

 

 

 

 

 

 

Setup Codes for Cable Box/PVR (or DVR) Combos

Motorola

1376

 

 

Scientific Atlanta

1877

 

Pioneer

1877

 

 

 

 

Setup Codes for DVD Players

 

 

 

 

 

 

 

 

Apex Digital

0672, 0717, 0794, 1056, 0755,

 

 

Mintek

0839, 0717

 

 

0797, 1100, 0796, 1061

 

 

Mitsubishi

0521, 1521

 

 

 

 

Axion

1072

 

 

Nesa

0717

 

 

 

 

Blaupunkt

0717

 

 

Norcent

1003

 

 

 

 

Blue Parade

0571

 

 

Onkyo

0503

 

 

 

 

CineVision

0876

 

 

Oritron

0651

 

 

 

 

Curtis Mathes

1087

 

 

Panasonic

0490, 1762

 

 

 

 

CyberHome

1024, 1023, 0816

 

 

Philips

0503, 0539, 0646

 

 

 

 

Daewoo

0784

 

 

Pioneer

0525, 0571

 

 

 

 

Denon

0490

 

 

Polk Audio

0539

 

 

 

 

Dual

1068

 

 

Proscan

0522

 

 

 

 

DVD2000

0521

 

 

Qwestar

0651

 

 

 

 

Emerson

0591, 0675

 

 

RCA

0522, 0571, 0717

 

 

 

 

Enterprise

0591

 

 

Rotel

0623

 

 

 

 

Fisher

0670

 

 

Rowa

0823

 

 

 

 

Funai

0675

 

 

Samsung

0573, 1075, 0820

 

 

 

 

GE

0522, 0815, 0717

 

 

Sanyo

0670

 

 

 

 

Go Video

0744, 0715, 0783

 

 

Shinsonic

0533, 0839

 

 

 

 

GPX

0699

 

 

Sony

0533, 1533, 0864, 1033

 

 

 

 

Greenhill

0717

 

 

Sylvania

0675

 

 

 

 

Hitachi

0573

 

 

Symphonic

0675

 

 

 

 

Hiteker

0672

 

 

Technics

0490

 

 

 

 

JVC

0558, 0623

 

 

Theta Digital

0571

 

 

 

 

Kenwood

0490, 0534

 

 

Toshiba

0503

 

 

 

 

KLH

0717, 1020

 

 

Tredex

0799

 

 

 

 

Koss

0651

 

 

Urban Concepts

0503

 

 

 

 

Lasonic

0798

 

 

Xbox

0522

 

 

 

 

Magnavox

0503, 0675

 

 

Yamaha

0490, 0539, 0545

 

 

 

 

Marantz

0539

 

 

Zenith

0503, 0591

 

 

 

 

Microsoft

0522

 

 

 

 

Setup Codes For DVD Player/VCR Combos

 

Apex Digital

1061

 

 

Sanyo

0104

 

 

Go Video

0744, 0715

 

 

Sony

0864

Hitachi

0000

 

 

Sylvania

0675, 0000

Panasonic

1762

 

 

Symphonic

0675, 0000

RCA

0060

 

 

Toshiba

0503

Samsung

1075, 0820

 

 

 

 

 

 

 

 

 

continued on next page...

 

 

 

 

 

 

18

MANUFACTURER’S CODES

Setup Codes for PVRs (or DVRs)

Panasonic

0616

Sonic Blue

0616, 0614

Philips

0618

Sony

0636

ReplayTV

0614, 0616

Tivo

0636, 0618

Setup Codes for Satellite Receivers

AlphaStar

0772

Mitsubishi

0749

DirecTV

0392, 0566, 0639, 0247, 0749,

Motorola

0869

 

1749, 0724, 0819, 1856

Next Level

0869

 

 

Dish Network System 1005, 0775

Panasonic

0247, 0701

 

 

Dishpro

1005, 0775

Paysat

0724

 

 

Echostar

1005, 0775

Philips

0749, 1749, 0724, 0722

 

 

Expressvu

0775

Proscan

0392, 0566

 

 

GE

0566

RadioShack

0869

 

 

General Instrument

0869

RCA

0392, 0566, 0855, 0143

 

 

GOI

0775

Samsung

1276

 

 

Hitachi

0819

SKY

0856

 

 

HTS

0775

Sony

0639, 1639

 

 

Hughes Network

 

Star Choice

0869

Systems

0749, 1749

Toshiba

0749, 1749, 0790, 1285

JVC

0775

UltimateTV

0392, 0639

Magnavox

0724, 0722

Uniden

0724, 0722

Memorex

0724

Zenith

0856, 1856

 

 

Setup Codes for Satellite Receiver/PVR (or DVR) Combos

Echostar

1005

Expressvu

0775

Proscan

0392

Setup Codes for TVs

AOC

0030

Admiral

0093, 0463

Advent

0761, 0842

Aiko

0092

Akai

0702, 0030, 0672, 0812

Alfide

0672

America Action

0180

Anam

0180

Apex Digital

0748, 0765, 0767

Audiovox

0451, 0180, 0092, 0623

Baysonic

0180

Bell & Howell

0154

Bradford

0180

Broksonic

0236, 0463

CXC

0180

Candle

0030

Carnivale

0030

Carver

0054

Celebrity

0000

Celera

0765

Changhong

0765

Cineral

0451, 0092

Citizen

0060, 0030, 0092

Clarion

0180

Contec

0180

Craig

0180

Crosley

0054

Crown

0180, 0672

RCA

0392

Sony

0639

Crown Mustang

0672

Curtis Mathes

0047, 0054, 0154, 0451, 0093,

 

0060, 0702, 0030, 0145, 0166,

 

1147, 1347

Daewoo

0451, 1661, 0092, 0672, 0623

Denon

0145

Dumont

0017

Durabrand

0178, 0180

Electroband

0000

Emerson

0154, 0236, 0463, 0180, 0178,

 

0171, 0623

Envision

0030

Fisher

0154

Fujitsu

0683, 0809

Funai

0180, 0171

Futuretech

0180

GE

0047, 0051, 0451, 0178, 1147,

 

1347

Gateway

1755, 1756

Gibralter

0017, 0030

GoldStar

0030, 0178

Gradiente

0053

Grundig

0672

Grunpy

0180

Hallmark

0178

Harman/Kardon

0054

Harvard

0180

Havermy

0093

Hello Kitty

0451

19

Hitachi

0145, 1145

Infinity

0054

Inteq

0017

JBL

0054

JCB

0000

JVC

0463, 0053

Jensen

0761

KEC

0180

KLH

0765, 0767

KTV

0180, 0030

Kenwood

0030

Kioto

0706

LXI

0047, 0054, 0154, 0156, 0178

MGA

0150, 0030, 0178

MTC

0060, 0030

Magnavox

0054, 0706, 0030, 1454, 1254

Marantz

0054, 0030

Matsushita

0250, 0650

Megatron

0178, 0145

Memorex

0154, 0250, 0463, 0150, 0178

Midland

0047, 0017, 0051

Mitsubishi

0093, 0150, 1250, 0178, 0836

Motorola

0093

Multitech

0180

NAD

0156, 0178, 0866

NEC

0030, 1704, 0704

NTC

0092

Nikko

0030, 0178, 0092

Norcent

0748, 0824

Onwa

0180

Optimus

0154, 0250, 0166, 0650

Optonica

0093

Orion

0236, 0463

Panasonic

0051, 0250, 0650

Penney

0047, 0156, 0051, 0060, 0030,

 

0178, 1347

Philco

0054, 1661, 0463, 0030, 0145

Philips

0054, 1454, 0690

Pilot

0030

Pioneer

0166, 0866

Portland

0092

Prima

0761

Prism

0051

Proscan

0047

Proton

0178

Pulsar

0017

Quasar

0051, 0250, 0650

RCA

0047, 1047, 1147, 1247, 1347,

 

1447, 1547

RadioShack

0047, 0154, 0180, 0030, 0178

Realistic

0154, 0180, 0030, 0178

Runco

0017, 0030

SSS

0180

Sampo

0030, 1755

Samsung

0060, 0702, 0030, 0178, 0812

Sansei

0451

Sansui

0463

Sanyo

0154

Scotch

0178

Scott

0236, 0180, 0178

Sears

0047, 0054, 0154, 0156, 0178,

 

0171

Semivox

0180

Semp

0156

Sharp

0093

Sheng Chia

0093

Sony

0000, 1100, 0810

Soundesign

0180, 0178

Squareview

0171

Starlite

0180

Supreme

0000

Sylvania

0054, 0030, 0171

Symphonic

0180, 0171

TMK

0178

TNCi

0017

TVS

0463

Tandy

0093

Technics

0051, 0250

Techwood

0051

Teknika

0054, 0180, 0150, 0060, 0092

Telefunken

0702

Toshiba

0154, 0156, 0060, 1356, 1656,

 

1704, 0650

Toshiba

1256

Vector Research

0030

Victor

0053

Vidikron

0054

Vidtech

0178

ViewSonic

1755

Wards

0054, 0030, 0178, 0866

Waycon

0156

White Westinghouse

0463, 0623

Yamaha

0030

Zenith

0017, 0463, 0178, 0092

Setup Codes For TV/DVD Player Combos

Sylvania

0675

Setup Codes For TV/VCR Combos

America Action

0278

GoldStar

1237

Audiovox

0278

Harley Davidson

0000

Broksonic

0479, 1479

Hitachi

0000

Citizen

1278

Lloyd’s

0000

Colt

0072

Magnasonic

1278

Curtis Mathes

1035

Magnavox

0000, 1781

Daewoo

1278

Magnin

0240

Emerson

0479, 1479, 1278

Memorex

0162, 1237

Funai

0000

continued on next page...

GE

0240, 1035, 0807, 1060

 

20

MANUFACTURER’S CODES

Setup Codes For TV/VCR Combos, continued

MGA

0240

Sansui

0000, 1479, 0479

Mitsubishi

0807

Sanyo

0240

Optimus

0162

Sears

0000, 1237

Orion

1479, 0479

Sony

0000, 1232

Panasonic

0162, 1035

Sylvania

1781

Penney

0240, 1035, 1237

Symphonic

0000

Quasar

0162, 1035

Thomas

0000

RadioShack

0000

Toshiba

1145, 0845

RCA

0240, 0807, 1060, 1035

Zenith

0000, 1479, 0479

Samsung

1014

 

 

Setup Codes For TV/VCR/DVD Player Combos

Sharp

0807

Setup Codes For VCRs

ABS

1972

 

Admiral

0048,

0209

Adventura

0000

 

Aiko

0278

 

Aiwa

0037,

0000

Akai

0041

 

Alienware

1972

 

America Action

0278

 

American High

0035

 

Asha

0240

 

Audiovox

0037,

0278

Beaumark

0240

 

Bell & Howell

0104

 

Broksonic

0184, 0121, 0209, 1479, 0479

Calix

0037

 

Canon

0035

 

Carver

0081

 

CCE

0072,

0278

Citizen

0037, 0278, 1278

Colt

0072

 

Craig

0037, 0047, 0240, 0072

Curtis Mathes

0060, 0035, 0162, 0041, 1035

Cybernex

0240

 

CyberPower

1972

 

Daewoo

0045, 0278, 1278

Denon

0042

 

Durabrand

0038, 0039

Dynatech

0000

 

Electrohome

0037

 

Electrophonic

0037

 

Emerex

0032

 

Emerson

0037, 0184, 0000, 0121, 0043,

 

0209, 0278, 0479, 1479, 1278

Fisher

0047, 0104

Fuji

0035, 0033

Funai

0000

 

Garrard

0000

 

Gateway

1972

 

GE

0060, 0035, 0240, 0807, 1060,

 

1035

 

Go Video

0432

 

GoldStar

0037, 0038, 1237

Gradiente

0000

 

Harley Davidson

0000

Harman/Kardon

0081, 0038

Harwood

0072

Hewlett Packard

1972

HI-Q

0047

Hitachi

0000, 0042, 0041

Hughes Network

 

Systems

0042

iBUYPOWER

1972

Jensen

0041

JVC

0067, 0041

KEC

0037, 0278

Kenwood

0067, 0041, 0038

KLH

0072

Kodak

0035, 0037

Lloyd’s

0000

Logik

0072

LXI

0037

Magnasonic

1278

Magnavox

0035, 0039, 0081, 0000, 1781

Magnin

0240

Marantz

0035, 0081

Marta

0037

Matsushita

0035, 0162

Media Center PC

1972

MEI

0035

Memorex

0035, 0162, 0037, 0048, 0039,

 

0047, 0240, 0000, 0104, 0209,

 

0479, 1237

MGA

0240, 0043

MGN Technology

0240

Microsoft

1972

Mind

1972

Minolta

0042

Mitsubishi

0067, 0043, 0807

Motorola

0035, 0048

MTC

0240, 0000

Multitech

0000, 0072

NEC

0104, 0067, 0041, 0038

Nikko

0037

Noblex

0240

Northgate

1972

Olympus

0035

21