Nostalgia Electrics MOS-400 User Manual

0 (0)
Nostalgia Electrics MOS-400 User Manual

M A R G A R I T A O A S I S ™

MOS-400 Series

FOR HOUSEHOLD USE ONLY

READ THESE INSTRUCTIONS BEFORE

USING THIS UNIT!

SAVE THESE INSTRUCTIONS!

1

IMPORTANT PRECAUTIONS

Appliance Specifications:

450 Watts 120V / 60HZ

Important Precautions to Remember:

A.NEVER immerse the MARGARITA OASIS™ base or cord in water.

B.NEVER use near water.

C.NEVER leave unit unattended if used near children.

D.NEVER use a scouring pad on the MARGARITA OASIS™.

E.NEVER use an abrasive sponge or harsh cleaning products on the MARGARITA OASIS™.

F.NEVER use for anything other than what this item was originally intended.

G.Avoid contact with moving parts.

H.DO NOT operate this appliance with a damaged cord or plug, or in the event the appliance ever malfunctions.

I.DO NOT place motor base in dishwasher.

J.Keep out of reach of children.

K.Unplug MARGARITA OASIS™ from electrical outlet when not in use and before cleaning. Remove plug by gripping the plug body and pulling out of the outlet. Never yank or twist cord to unplug the unit.

L.This appliance is NOT A TOY

M.This appliance is not intended for use by young children or infirm persons without supervision.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS before operating this MARGARITA OASIS™

Do not use outdoors, FOR HOUSEHOLD USE ONLY.

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

To protect against electrical shock, do not immerse cord, plugs or unit in water.

Close supervision is necessary when any appliance is used by or near children.

Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

Do not operate any appliance with a damaged cord or plug. Should the appliance malfunction or become damaged, return the appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.

2

IMPORTANTSAFE GUARDS (Continued)

The appliance manufacturer does not recommend the use of accessory attachments. This may result in injuries.

Never place fingers or other utensils into feed or discharge areas.

The cord should be arranged so that it will not drape over the table or counter top in such a way where it can be pulled on by children. This should also reduce the risk of becoming entangled or tripping.

Keep hands and utensils out of container while blending to reduce the risk of severe

injury to persons or damage to the MARGARITA OASIS™. A scraper may be used, but only when the MARGARITA OASISTM is not running.

Do not place on or near a hot gas or electric burner, or in a heated oven.

Before plugging your unit into the main electrical supply, make sure the voltage corresponds to that indicated on the maker’s nameplate.

Extreme caution must be used when moving the MARGARITA OASIS™ with liquids.

Do not use this appliance for other than intended use.

Blades are sharp. Handle carefully.

To reduce the risk of injury, never place cutter-assembly blades on base without pitcher properly attached.

Always operate the MARGARITA OASIS™ with cover in place.

A unit that is plugged into an outlet should not be left unattended.

Check the ice shaving chamber for presence of foreign objects prior to use.

Make sure the glass pitcher with blender base is properly attached before inserting into MARGARITA OASIS™ base unit.

PRE-USE PREPARATION AND ASSEMBLY

Prepare for first use by thoroughly washing the glass pitcher, lid, blending blade and base, clear ice bowl, see through ice cover, and water reservoir in warm sudsy water and thoroughly dry. DO NOT put the motor base in water. To clean the motor base when needed, use a damp cloth to wipe the exterior, and then dry off with a clean, non-abrasive towel. (See Parts Breakdown on page 3).

1.Check the blending base of the glass pitcher to confirm the mixing blade and rubber washer are in place and the base has been properly attached.

2.Set the pitcher lid on the mouth of the glass pitcher. Note the ice shaving chute goes up and down to allow for the insertion of the pitcher. Tip the pitcher slightly as you insert the mouth of the pitcher under the ice shaving chute, pushing upward and simultaneously setting the pitcher base onto the motor base. (See Photo Illustration on page 4.)

3.To open the ice shaving chamber located at the top of the motor base, push the front tab away from you. With your thumb on the tab and your first two fingers hooked into the lip (located directly across from the tab over clear window), gently lift up.

Loading...
+ 5 hidden pages