M A R G A R I T A M A N I A ™
MMA-600 Series
FOR HOUSEHOLD USE ONLY
READ THESE INSTRUCTIONS BEFORE USING THIS
UNIT!
SAVE THESE INSTRUCTIONS!
ENGLISH |
1 |
IMPORTANT PRECAUTIONS
Appliance Specifications:
350 Watts 120V / 60HZ
Important Precautions to Remember:
A.NEVER immerse the MARGARITA MANIA™ base or cord in water.
B.NEVER use near water.
C.NEVER leave unit unattended if used near children.
D.NEVER use a scouring pad on the MARGARITA MANIA. ™
E.NEVER use an abrasive sponge or harsh cleaning products on the MARGARITA MANIA. ™
F.NEVER use for anything other than what this item was intended.
G.Avoid contact with moving parts.
H.DO NOT operate this appliance with a damaged cord or plug or in the event the appliance ever malfunctions.
I.DO NOT place motor base in dishwasher.
J.Keep out of reach of children.
K.Unplug MARGARITA MANIA™ from electrical outlet when not in use and before cleaning. Remove plug by gripping the plug body and pulling out of the outlet. Never yank or twist cord to unplug the unit.
L.This appliance is NOT A TOY
M.This appliance is not intended for use by young children or infirm persons without supervision.
IMPORTANT SAFE GUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS before operating this MARGARITA MANIA™
Do not use outdoors, FOR HOUSEHOLD USE ONLY.
This appliance has a polarized plug (one blade is wider than the other). To reduce the Risk of electrical shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
To protect against electrical shock, do not immerse cord, plugs or unit in water.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning.
Do not operate any appliance with a damaged cord or plug. Should the appliance malfunction or become damaged, return the appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment or send back to company as stated in this booklet in the warranty.
Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the Margarita Mania™. A scraper may be used but must be used only when the Margarita Mania™ is not running.
ENGLISH |
2 |
IMPORTANT SAFE GUARDS (Continued)
Blades are sharp. Handle carefully.
Install the blender pitcher onto blender base (do not reach hands inside of blender as the blades are sharp).
To reduce the risk of injury, never place blending blades on base without pitcher properly attached.
Clean all parts of the Margarita Mania™ prior to use.
Always operate Margarita Mania™ with ice compartment lid in place.
Check the ice shaving chamber for presence of foreign objects before using.
The appliance manufacturer does not recommend the use of accessory attachments. This will risk injuries.
Never place fingers or other utensils into feed or discharge areas.
The cord should be arranged so that it will not drape over the table or counter top in such a way where it can be pulled on by children. This should also reduce the risk resulting from becoming entangled or tripping.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Before plugging your unit into the main electrical supply, make sure the voltage corresponds to that indicated on the maker’s nameplate.
DO NOT attempt to move the MARGARITA MANIA™ while the unit is in operation.
Do not use this appliance for other than intended use.
A unit that is plugged into an outlet should not be left unattended.
Check the Ice shaving chamber for presence of foreign objects prior to use.
This is not a commercial unit. Do not leave unit running for more than 3 minutes at a time.
Make sure the glass pitcher with blender base is properly attached before inserting into MARGARITA MANIA™ base unit.
PRE-USE PREPARATION AND ASSEMBLY
Prepare for first use by thoroughly washing the clear glass pitcher and lid, blending blade, and base, ice tray, clear ice cover and water reservoir in warm sudsy water and thoroughly dry.
DO NOT put the motor base in water. To clean motor base when needed, using a damp cloth to wipe exterior should be sufficient, followed by drying with a clean dry towel. (See Parts Breakdown on page 3).
1.Check the blending base of the glass pitcher to confirm the mixing blade and rubber washer are in place and the base has been properly attached.
2.Set the pitcher lid on the mouth of the pitcher. NOTE: The ice shaving chute goes up and down to allow for the insertion of the pitcher. Tip the pitcher slightly as you insert the mouth of the pitcher under the ice shaving chute, pushing upward and simultaneously set the pitcher base onto the blending gear. (See Breakdown illustration on page 3)
3.To remove the clear ice cover, push in the two large tabs located on one side of the clear lid while you lift the cover out. This allows the two extruding tabs to back out of their receptor holes in the ice tray. (See photo illustration C, on page 4)
Loading...