Nilfisk 56264466, 56262055, 56262174, 56262214, 56262054 User Manual

...
0 (0)
Nilfisk 56264466, 56262055, 56262174, 56262214, 56262054 User Manual

AX 300 / AX 400

Instructions For Use

Nilfisk MODELS 56264400, 56262170, 56262171 56264401, 56262175, 56262174 56262054 56262055, 56262213, 56262214, 56264466

English

4/04 Form Number 56041590

Table of Contents

 

Page

Introduction ........................................................................

2

Parts and Service ..............................................................

2

Nameplate .........................................................................

2

Unpacking the Machine .....................................................

2

Important Safety Instructions .............................................

3

Importantes mesures de sécurité ......................................

4

Preparing the Machine for Use ....................................

5-8

Installing the Brush ............................................................

5

For Use on Carpeted Floors ..............................................

6

For Use on Hard Floors .....................................................

7

Filling the Solution Tank ....................................................

8

Operation ......................................................................

9-10

After Use .........................................................................

11

Maintenance ..............................................................

12-13

Maintenance Schedule ....................................................

12

Storing the Machine .........................................................

12

Brush Maintenance ..........................................................

12

Pick-Up Tool Maintenance ..............................................

12

Power Cord Maintenance ................................................

12

Spray Nozzle Maintenance ..............................................

12

Lubrication .......................................................................

13

Vacuum Motor Maintenance ............................................

13

Optional Accessories ....................................................

14

Hard Floor Kits ................................................................

14

Brush Options ..................................................................

14

Optional Accessory Tools ................................................

14

Technical specifications ...................................................

14

INTRODUCTION

This manual will help you get the most from your Nilfisk AX 300/ 400. Read it thoroughly before operating the machine.

This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by Nilfisk service personnel using Nilfisk original replacement parts and accessories.

Call Nilfisk for repair parts or service. Please specify the Model and Serial Number when discussing your machine.

NAME PLATE

The Model and Serial Number of your machine are shown on the Nameplate on the back panel of the machine. This information is needed when ordering repair parts for the machine. Use the space below to note the Model and Serial Number of your machine for future reference.

MODEL

SERIAL NUMBER

UNPACKING THE MACHINE

When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can be inspected by the carrier that delivered it. Contact the carrier immediately to file a freight damage claim.

For UK and Ireland only: IMPORTANT!

THE PLUG IS NOT WATERPROOF - KEEP DRY

The cord is already fitted with a molded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating marked thus "10A". If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same color as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated on the last page. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted. The wires in the main lead are colored in accordance with the following code: Blue - Neutral, Brown - Live. As these colors may not correspond with the colored markings identifying the terminals in your plug, proceed as follows: The wire which is colored Blue must be connected to the terminal in the plug which is marked with the letter N or colored Blue or Black. The wire which is colored Brown must be connected to the terminal which is marked with the letter L, or colored Brown or Red.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLORED GREEN OR GREEN/YELLOW.

*WARNING: A PLUG WITH BARED FLEXIBLE CORDS IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET.

2 - FORM NO. 56041590 / AX 300 / AX 400

IMPORTANT SAFETY INSTRUCTIONS

This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other than normal residential housekeeping purposes.

When using an electrical appliance, basic precautions should always be followed, including the following:

Read all instructions before using this appliance.

WARNING!

To reduce the risk of fire, electric shock, or injury:

Do not leave the appliance when it is plugged in. Unplug the unit from the outlet when not in use and before servicing.

To avoid electric shock, do not expose to rain. Store indoors.

Do not allow to be used as a toy. Close attention is necessary when used near children.

Use only as described in this manual. Use only the manufacturer’s recommended attachments.

Do not use with damaged cord or plug. If the appliance is not working as it should be, has been dropped, damaged, left outdoors or dropped into water, return it to a service center.

Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces.

Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

Do not handle the plug, cord or appliance with wet hands.

Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

Keep loose clothing, hair, fingers, and all parts of body away from openings and moving parts.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes, or any health endangering dusts.

Turn off all controls before unplugging.

Use extra care when cleaning on stairs.

Do not use to pick up flammable or combustible liquids such as petrol or use in areas where they may be present.

If foam or liquid comes out with the vacuum exhaust, switch power off immediately. Verify that there are no foreign objects obstructing the float ball from moving freely. Contact Nilfisk if the problem persists.

Liquid ejected at the spray nozzle could be dangerous as a result of its temperature, pressure or chemical content.

Only use the brushes provided with the appliance or those specified in the instruction manual. The use of other brushes may impair safety.

SAVE THESE INSTRUCTIONS

FORM NO. 56041590 / AX 300 / AX 400 - 3

IMPORTANTES MESURES DE SÉCURITÉ

Cette machine ne convient qu´à un usage industriel, par exemple dans des hôtels, écoles, hôpitaux, usines, boutiques et bureaux et autres à l´exclusion de tout usage de maintenance résidentielle normale.

L’utilisation d’un appareil électrique demande certaines précautions:

LIRE TOUTES LES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER CET APPAREIL

AVERTISSEMENT!

Pour réduire les risques d’incendie, de choc électrique ou de blessure:

Ne pas laisser l’appareil sans surveillance lorsqu’il est branché. Débrancher lorsque l’appareil n’est pas utilisé et avant l’entretien.

Pour réduire les risques de choc électrique, utiliser à l’intérieur seulement.

Ne pas permettre aux enfants de jouer avec l’appareil. Une attention particulière est nécessaire lorsque l’appareil est utilisé par des enfants ou à proximité de ces derniers.

N’utiliser que conformément à cette notice avec les accessoires recommandés par le fabricant.

Ne pas utiliser si le câble ou la fiche est endommagé. Retourner l’appareil à un atelier de réparation s’il ne fonctionne pas bien, s’il est tombé ou s’il a été endommagé, oublié à l’extérieur ou immergé.

Ne pas tirer soulever ou traîner l’appareil par le câble. Ne pas utiliser le câble comme une poignée, le coincer dans l’embrasure d’une porte ou l’appuyer contre des arêtes vives ou des coins. Ne pas faire rouler l’appareil sur le câble. Garder le câble à l’écart des surfaces chaudes.

Ne pas débrancher en tirant sur le câble. Tirer plutôt la fiche.

Ne pas toucher la fiche ou l’appareil avec des mains humides.

N’insérer aucun objet dans les ouvertures. Ne pas utiliser l’appareil lorsqu’une ouverture est bloquée. S’assurer que de la poussière, de la peluche, des cheveux ou d’autres matières ne réduisent pas le débit d’air.

Maintenir les cheveux, les vêtements amples, les doigts et toutes les parties du corps à l’écart des ouvertures et des pièces mobiles.

Ne pas aspirer de matières en combustion ou qui dégagent de la fumée, comme des cigarettes, des allumettes ou des cendres chaudes.

Mettre toutes les commandes à la position ARRÊT avant de débrancher l’appareil.

User de prudence lors du nettoyage des escaliers.

Ne pas aspirer des liquides inflammables ou combustibles, comme de l’essence, et ne pas faire fonctionner dans des endroits ou peuvent se trouver de tels liquides.

Si de la mousse ou un liquide s’échappe avec l’air évacué, mettez immédiatement l’aspirateur hors tension. Assurez-vous qu’aucun corps étranger n’empêche le flotteur de se déplacer librement. Si le problème persiste, contactez Nilfisk.

Le liquide qui sort de l’embout de vaporisation peut s’avérer dangereux en raison de sa température, de sa pression ou du produit chimique qu’il contient.

Utilisez uniquement les brosses fournies avec l’appareil ou celles spécifiées dans le manuel d’instructions. L’utilisation d’autres brosses peut mettre la sécurité en péril.

CONSERVER CES INSTRUCTIONS

4 - FORM NO. 56041590 / AX 300 / AX 400

1

2

3

4

5

6

standard black

carpet

 

 

 

(optional) blue

smooth surface

 

 

 

(optional) gray 500

light grit

 

 

 

(optional) gray 240

grout grit

Select the correct brush for your cleaning application.

7

8

FORM NO. 56041590 / AX 300 / AX 400 - 5

1

2

3

4

Remove wheel

5

6

7

8

6 - FORM NO. 56041590 / AX 300 / AX 400

Loading...
+ 14 hidden pages