Niles Audio SSVC-2, SSVC-4, SSVC-6 User Manual

0 (0)

®

Niles Audio

Corporation

www.nilesaudio.com

12331 S.W. 130 Street

Miami, Florida 33186

Tel: (305) 238-4373

Fax: (305) 238-0185

©2004 Niles Audio Corporation. All rights reserved. Niles, the Niles logo and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation. Because we strive to improve our products, Niles reserves the right to change product specifications without notice. The technical and other information contained herein is not intended to set forth all technical and other specifications of Niles products. Additional information can be obtained on-line at www.nilesaudio.com or by calling Niles at 1-800-289-4434. Printed in China 01/04 DS00357ACN

I N S T A L L A T I O N & O P E R A T I O N G U I D E

SSVC-2/SSVC-4/SSVC-6

SPEAKER SELECTION/VOLUME CONTROL SYSTEMS

B L E N D I N G H I G H F I D E L I T Y A N D A R C H I T E C T U R E ®

S P E A K E R S E L E C T I O N / V O L U M E C O N T R O L S Y S T E M

SSVC-2/SSVC-4/

SSVC-6

Speaker Selection/

Volume Control

Systems

TABLE OF CONTENTS

Introduction

Introduction

1

The SSVC series is a combination speaker selector and volume

controller. It allows you to connect multiple pairs of speakers

Features and

 

to your stereo receiver or amplifier and adjust the volume of

 

any pair independently. Additionally, you can choose to listen

Benefits

2

to any pair of speakers, or any combination of pairs simultane-

Installation

 

ously. You don’t have to worry about overloading your amplifier.

 

The SSVC series uses impedance magnification to keep your

Considerations 5

amplifier running safely, even with all speakers playing.

Installation

8

A perfect application for the SSVC series is individually control-

 

 

ling speaker “on/off” and volume adjustment for multiple

Operation

10

pairs of speakers: one pair in the room with the main stereo

 

 

system and all other pairs at remote locations. The SSVC series

Specifications 12

adjusts the volume of the speakers connected to it by attenu-

 

 

ating the amplifier signal. Niles volume controls use autoform-

 

 

ers instead of L-pads for the volume controlling element. This

 

 

assures minimal internal power dissipation with virtually no

 

 

power wasted as heat.

1

S P E A K E R S E L E C T I O N / V O L U M E C O N T R O L S Y S T E M

Notes

14

Niles Audio SSVC-2, SSVC-4, SSVC-6 User Manual

S P E A K E R S E L E C T I O N / V O L U M E C O N T R O L S Y S T E M

12 position volume control provides greater attenuation than conventional

10 position designs.

Recessed areas for

custom room

SSVC-4 SPEAKER SELECTOR/VOLUME CONTROL SYSTEM

labels.

Attractive low-profile

design.

1

2

3

4

 

 

 

 

Simple

push-button

operation. Connect up to two pairs of speakers.

Niles Audio Corporation Miami, Florida USA

3/4

5/6

SPEAKER 4

SPEAKER 3

SPEAKER 2

SPEAKER 1

2

AMPLIFIER

1

 

 

 

 

 

SPEAKER PAIRS

 

 

 

 

Impedamce

Removable

Magnification

Connectors.

Selection.

 

S P E A K E R S E L E C T I O N / V O L U M E C O N T R O L S Y S T E M

Specifications

Audio Power Handling

100 watts/channel continuous music power

Frequency Response

+/- 1.2 dB from 20 Hz to 20 kHz

Mounting

Table-top component

Wiring Requirements

Individual runs of 2-conductor speaker wire. Connectors accommodate wire sizes 14-22 gauge (16 gauge recommended)

Overall Dimensions

8-1/2" wide x 2" high x 7-1/4" deep

Weight 3 lb.

3

12

Loading...
+ 5 hidden pages