Niles Audio PERS-2400B User Manual

Size:
1.12 Mb
Download

PERS-2400B

PERSONAL

EMERGENCY

REPORTING

SYSTEM

BY

BY

Installation,

and Operation Instructions

USA & Canada (800) 421-1587& (800)392-0123

(760) 438-7000- Toll Free FAX (800)468-1340

www.linearcorp.com

CONTENTS

1. FRONT PANEL FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. REMOVING BOTTOM COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3. CONSOLE BOTTOM FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4. OPTIONAL VB-4BVOICE BOARD INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5. OPTIONAL RELAY OUTPUT CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6. OPTIONAL REMOTE SPEAKER/MIC CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 2 7. BACKUP BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8. INSTALL TRANSFORMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 9. APPLY POWER - SELECT DIALING METHOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 10. TRANSMITTER INSTALLATION OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 11. INSTALLING SINGLE TRANSMITTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 12. INSTALLING MULTIPLE TRANSMITTERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 13. TESTING TRANSMITTERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 14. ERASING TRANSMITTERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 15. LOCAL PROGRAMMING WITHRA-2400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 16. TELEPHONE CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 17. SYSTEM OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 18. ACTIVITY TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 19. AUDIO BOARD OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 20. SPEAKERPHONE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 21. SUPERVISORY CONDITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 22. WIRELESS INSTALLATION TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LINEAR LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PRODUCT DESCRIPTION

The PERS-2400BConsole is a supervised wireless emergency reporting product designed for medical alert applications. Thetable-toporwall-mountConsole provides “pushbutton” emergency assistance to anyone who desires additional security and peace of mind. For the visually impaired, each button on the Console is molded with braille characters to identify the button’s function.

The Console receives signals from up to 16 Linear wireless transmitters. Activating a transmitter causes the Console’s digital communicator to send the appropriate alarm report to the central monitoring station via the standard telephone network. In addition to the central station report, audible and visual indications occur and the alarm relay energizes during an emergency activation.

The emergency alarm can be triggered by the large EMERGENCY button on the face of the Console or with a wireless transmitter.The fire alarm can be triggered by wireless smoke alarms.

The optional activity timer can be set for 8, 12 or 24 hour operation. The emergency alarm will trigger automatically if the time set elapses before an activity transmitter is triggered or the Console’s HOME button is pressed.

If the optional Model VB-4Bvoice board is installed, the Console will “talk” to the user.

The digitized voice, will sound “emergency”, “fi re”, “CO Alarm”, “timer done soon”, and other system operation, setup, and supervisory prompts from a 38 word vocabulary. In addition, the voice board supports 2-wayautomatic,2-waymanual, and1-waylisten-onlyaudio communications with central station monitoring personnel using the Console’sbuilt-inhigh-sensivitymicrophone and speaker.

The Console can be programmed to act as a remote controlled “speakerphone”. With the speakerphone mode enabled (Model VB-4Bvoice board required) the Console will monitor the telephone line for an incoming call. Activating any emergency transmitter (or the Console’s EMERGENCY button) while the telephone is ringing will cause the Console to seize the line and begin full duplex voice communications. Activating any emergency transmitter (or EMERGENCY button) during the call will disconnect the line. The Console willauto-disconnectafter 15, 30, or 60 minutes (programmable).

Supervised transmitters regularly send status reports to the Console and low battery reports when their batteries are low. When the Console receives a low battery report, the TROUBLE indicator fl ashes. If the Console fails to receive a status report from a transmitter for a period of 24 hours, the TROUBLE indicator will light. All supervisory conditions can sound a local annunciation and be reported to the central station.

The Console’s digital communicator can route calls to three telephone numbers: primary, secondary, and supervisory. General reporting codes and individual sensor reporting codes are programmable for the 4x2 format. Alternately, Ademco Contact ID may be selected for the communicator reporting format.

Powered by a low voltage plug-intransformer, the Console has provisions for a rechargeable backup battery for operation during AC power outages. A power switch allows forout-of-servicestorage of the Console without discharge of the battery.The battery is recharged and supervised by the Console. If the backup battery becomes low the POWER light will fl ash and the condition can be reported to the central station.

The Console is programmed using Linear’s RA-2400 remote access software (available on CD and at Linear’s Web site: www.linearcorp.com). Refer to the software’s built-in help fi le for programming details.

TRANSMITTER COMPATIBILITY

EMERGENCY

DXT-41DXT-42

DXT-61ADXS-21DXS-23

DXS-62A

DXS-31

NOTE: COMPATABILITY WITH THEPERS-2400BHAS NOT BEEN VERIFIED BY UL

NOTE: NOT A UL LISTED DEVICE

FIRE CARBON

MONOXIDE

 

DXS-73

DXS-80

R

ACTIVITY

 

A

 

D

 

 

I

 

 

O

 

 

S

 

 

I

 

 

G

DXS-31/32

DXS-54

N

 

 

A

 

 

L

 

 

S

 

 

 

PERS-2400B

UP TO 16 TRANSMITTERS

CONSOLE

 

CAN BE USED WITH

 

EACH CONSOLE

 

TO CENTRAL STATION

VIA TELEPHONE

OPERATION SUMMARY

A variety of Linear’s supervised DXS and non-supervisedDX format transmitters can be used with the Console. Transmitters can be assigned to the following four functions:

EMERGENCY

Portable, supervised and non-supervised,pendant,belt-clip,or wristband type transmitters (ModelsDXT-41,DXT-42,DXT-61A,DXS-21,DXS-23,DXS-62A)and stationary, supervised ModelDXS-31transmitters are used for medical alert applications. When a medical alert transmitter is triggered, the Console sounds atwo-tonesiren and an emergency report is sent to the central station. The emergency alarm can also be triggered by pressing the

Console’s EMERGENCY button.

FIRE

Supervised Model DXS-73wireless photoelectric smoke alarms trigger the fi re alarm.

When the fi re alarm is activated, the Console sounds a repeated series of three beeps and a fi re report is sent to the central station.

CARBON MONOXIDE (CO)

Supervised Model DXS-80wireless carbon monoxide detectors trigger the CO alarm. When a carbon monoxide alarm is activated, the Console sounds a repeated series of four beeps and a carbon monoxide report is sent to the central station.

ACTIVITY

Supervised, switch or motion triggered transmitters (Models DXS-31/DXS-32andDXS-54)can be used for ensuring human activity. TheDXS-54motion detector will monitor room activity. TheDXS-31andDXS-32transmitters can be wired to a pushbutton or switch for manual activity monitoring. As long as a signal is received at least once every 8, 12, or 24 hours (programmable) an alarm willnot be triggered. 15 minutes before the programmed time expires, the HOME indicator will start blinking and a low pitched beep will sound every ten seconds.The activity timer can be reset with a signal from one of the activity transmitters or by pressing the HOME button on the Console. Failure to reset the activity timer within the programmed time period will cause the Console to sound thetwo-toneemergency siren and send an inactivity report to the central station. The activity timer can be turned on or off at the Console or through programming.

1. FRONT PANEL FEATURES

TROUBLE INDICATOR

EMERGENCY BUTTON

• NORMALLY OFF

• PRESS AND HOLD TO TRIGGER

• LIGHTS WHEN ANY TRANSMITTERS ARE MISSING

THE EMEREGNCY ZONE

(SUPERVISORY)

• PRESS DURING RING FOR

• BLINKS SLOWLY WHEN ANY TRANSMITTERS

SPEAKERPHONE MODE

HAVE A LOW BATTERY

• PRESS DURING SPEAKERPHONE

 

MODE TO DISCONNECT

POWER INDICATOR

LIGHTS WHEN AC IS PRESENT

BLINKS SLOWLY WHEN BATTERY IS CHARGING

BLINKS QUICKLY WHEN AC IS ABSENT

(CONSOLE ON BATTERY POWER)

• OFF IN TEST AND SETUP MODES

CLEAR BUTTON

• STOPS ALARM

• ADDS CANCEL TO AN ALARM REPORT IN PROGRESS

• PRESS IMMEDIATELY AFTER EMERGENCY TO PREVENT REPORT

CLEARS INDICATORS

STOPS TROUBLE BEEPER

• PRESS FOR 5 SECONDS TO ADD A TRANSMITTER

 

 

HOME BUTTON

 

 

 

 

• PRESS TO RESET ACTIVITY TIMER

 

• PRESS FOR 5 SECONDS TO TURN ACTIVITY TIMER OFF

HOME INDICATOR

 

• IF ACTIVITY TIMER IS OFF, PRESS FOR

5 SECONDS TO TURN ACTIVITY TIMER ON

LIGHTS WHEN ACTIVITY TIMER IS ON

BLINKS SLOWLY WHEN LESS THAN 15 MINUTES REMAIN ON THE ACTIVITY TIMER

BLINKS QUICKLY WHEN THE ACTIVITY TIMER HAS EXPIRED

SENDING INDICATOR

HOME BUTTON COVER

• ADHESIVE BACKED PLATE TO

• NORMALLY OFF

HIDE THE HOME BUTTON IF THE

• FLASHES WHEN CONSOLE IS PLACING A CALL

ACTIVITY TIMER IS NOT USED

 

3. CONSOLE BOTTOM FEATURES

16 VAC 1.25 AMP

PLUG-IN

TRANSFORMER

EXTERNAL SPEAKER, RELAY OUTPUT, ANDDIALER POWERTERMINALS

1 AMP 2AG

BATTERY FUSE (HIDDEN)

LOCAL

PHONE

JACK

12-VOLT1.2 AMP/HOUR BACKUP BATTERY

OPTIONAL

VB-4BVOICE BOARD

TELEPHONE

POWER

TEST

LINE JACK

SWITCH

BUTTON

2. REMOVING BOTTOM COVER

TO ACCESS THE INSIDE OF THE CONSOLE

PRESS THE TWO LOCKING TABS IN AND

REMOVE THE CONSOLE'S BOTTOM COVER

REMOVE

COVER

PRESS

TABS

IN

4. OPTIONAL VB-4BVOICE BOARD INSTALLATION

1

2 PRESS-FITMICROPHONE INTO

 

ROUND MOUNTING HOLE

CONNECT BLACK

MICROPHONE WIRE

TO CENTER

TERMINAL

CONNECT RED

MICROPHONE WIRE

TO THIS TERMINAL

3

4

SEAT

MICROPHONE

5

NOTE: POWER MUST BE OFF AND BATTERYSHOULD BE REMOVED

OR DISCONNECTED BEFORE INSTALLING THE AUDIO BOARD

CAREFULLY ALIGN PINS TO CONNECTORS

ON BOTH ENDS OF BOARD

BE SURE THAT THE

WHITE ARROWS ON

AUDIO BOARD POINT

TOWARD THE

BATTERY AREA

PRESS BOARD

COMPLETELY

INTO CONNECTORS

NOTE: AFTER THE AUDIO BOARD IS INSTALLED AND ENABLED, THE CONSOLE WILL SPEAK INSTEAD OF BEEP DURING PROGRAMMING

1

5. OPTIONAL RELAY OUTPUT CONNECTIONS

NOISEMAKER OR VISUAL INDICATOR

EXTERNAL

POWER SUPPLY

FORM "A" DRY CONTACT RELAY 24 VOLTS AT 1 AMP MAXIMUM

5

4 - RELAY NORMALLY OPEN

3 - RELAY COMMON

21

CONSOLE

TERMINAL BLOCK

CONNECT WIRES

TO TERMINALS

ROUTE CABLE UNDER STRAIN-RELIEFCLAMP

7. BACKUP BATTERY

1TURN POWER SWITCH OFF

ON

OFF

2CONNECT RED LEAD TO POSITIVE AND BLACK LEAD TO NEGATIVE BATTERY TERMINAL

BATTERY TYPE: 12-VOLT,1.2 AMP/HOUR

3FIT BATTERY INTO CONSOLE

SLIDE DOWN

THEN BACK

6. OPTIONAL REMOTE SPEAKER/MIC CONNECTIONS

VB-4B

 

 

 

 

VOICE

 

 

 

 

BOARD

 

 

 

 

 

 

REMOVE

 

 

 

 

JUMPER

 

 

 

 

WIRE

 

 

VB-4BTERMINAL BLOCK

 

CONSOLE

 

TERMINAL BLOCK

EXTERNAL MICROPHONE (+)

5 - DIALER POWER

 

 

MICROPHONE COMMON (-)

4 - RELAY NORMALLY OPEN

 

 

CONSOLE MICROPHONE (+)

3 - RELAY COMMON

 

 

 

 

2 -

DIALER COMMON

 

 

EXTERNAL SPEAKER

 

 

 

 

 

1 - EXTERNAL SPEAKER

 

NOTE: REMOVE

 

 

 

USE

JUMPER WHEN

 

 

 

USING AN

 

 

 

SHIELDED

 

 

 

EXTERNAL SPKR

 

 

 

TWISTED PAIR

 

 

 

 

NOTE: NOT

 

 

WIRE FOR

 

 

 

MICROPHONE

 

TESTED BY UL

 

 

 

SPKR

 

 

 

 

SPKR

 

 

 

 

MIC (-)

 

 

 

 

MIC (+)

 

 

 

RSM-1TERMINAL BLOCK

LINEAR

 

RSM-1

MODEL RSM-1

TERMINALS

 

 

8. INSTALL TRANSFORMER

1 PLUG TRANSFORMER INTO ANUN-SWITCHED117 VAC OUTLET

2 SECURETRANSFORMER

WITH SCREW

2

9. APPLY POWER - SELECT DIALING METHOD

TURN POWER

SWITCH ON

ON

NOTE: THE DEFAULT DIALING METHOD IS TONE DIALING

IF REQUIRED, CHANGE THE DIALING METHOD BY PRESSING AND HOLDING THE HOME & CLEAR BUTTONS WHILE SWITCHING THE POWER ON

7 BEEPS SOUND FOR PULSE DIALING

8 BEEPS SOUND FOR TONE DIALING

10. TRANSMITTER INSTALLATION OPTIONS

FOR ALL TWO-BUTTONTRANSMITTERS

WHEN IT IS

IT WILL

ACTIVATE

INSTALLED

USING

WITH THE

EITHER

LEFT BUTTON

BUTTON

 

WHEN IT IS

IT WILL ONLY

INSTALLED

ACTIVATE

WITH THE

USING BOTH

RIGHT BUTTON

BUTTONS

FOR DXS-31STATIONARY TRANSMITTERS

WHEN IT IS INSTALLED

WHEN IT IS INSTALLED

WITH THE JUMPER SET

WITH THE JUMPER SET

FOR DELAY

FOR INSTANT

IT WILL

IT WILL

FUNCTION

FUNCTION

AS EMERGENCY

AS ACTIVITY

FOR MODEL DXS-32:CUT JUMPER (INSTANT TX) FOR USE AS AN ACTIVITY TX. SEEDXS-32INSTALLATION INSTRUCTIONS

11. INSTALLING SINGLE TRANSMITTERS

ADDS ONE TRANSMITTER AT A TIME

1 PRESS CLEAR BUTTON FOR 5 SECONDS

• 5 BEEPS SOUND

(TX ADD MODE)

2ACTIVATE TRANSMITTER

• 1 BEEP SOUNDS

(TX ADDED) CONSOLE REVERTS TO OPERATE MODE

NOTE: IF THE CONSOLE'S MEMORY

 

IS FULL, ONE LONG BEEP SOUNDS WHEN

DXS-62A

TRYING TO ADD A TRANSMITTER

3REPEAT STEPS 1 & 2 FOR ADDITIONAL TRANSMITTERS (UP TO 16 TOTAL)

NOTE: PRESS CLEAR BEFORE TRANSMITTING TO RETURN TO OPERATE MODE WITHOUT ENTERING A TRANSMITTER

2 BEEPS SOUND WITH ACTIVITY TIMER ENABLED

3 BEEPS SOUND WITH ACTIVITY TIMER DISABLED

THE CONSOLE WILL RETURN TO OPERATE MODE AUTOMATICALLY AFTER 30 SECONDS

NOTE: WRITE DOWN EACH TRANSMITTER'S TYPE AND ZONE NUMBER WHEN THE TRANSMITTER IS ADDED. THE CENTRAL STATION WILL NEED TO KNOW THE TYPE AND REPORTING ZONE FOR EACH TRANSMITTER.

12. INSTALLING MULTIPLE TRANSMITTERS

ADDS MULTIPLE TRANSMITTERS

1 PRESS TEST BUTTON

• 4 BEEPS SOUND (TEST MODE)

2 PRESS TEST BUTTON AGAIN

• 5 BEEPS SOUND (ADD TX MODE)

NOTE: EACH TIME THE TEST BUTTON IS PRESSED IN THE ADD TX MODE, THE CONSOLE WILL BE READY TO INSTALL A TRANSMITTER IN THE NEXT AVAILABLE SENSOR ZONE LOCATION. IF THE VB-4BVOICE BOARD IS INSTALLED, THE CONSOLE WILL ANNOUNCE THE SENSOR ZONE LOCATION NUMBER.

3 ACTIVATE TRANSMITTER

• 1 BEEP SOUNDS

(TX ADDED)

 

NOTE: IF THE CONSOLE'S MEMORY

 

IS FULL, ONE LONG BEEP SOUNDS

 

WHEN TRYING TO ADD A TRANSMITTER

DXS-62A

4 REPEAT STEPS 2 & 3 FOR

 

ADDITIONAL TRANSMITTERS

 

(UP TO 16 TOTAL)

 

5PRESS CLEAR TO RETURN TO OPERATE MODE

2 BEEPS SOUND WITH ACTIVITY TIMER ENABLED

3 BEEPS SOUND WITH ACTIVITY TIMER DISABLED

THE CONSOLE WILL RETURN TO OPERATE

MODE AUTOMATICALLY AFTER 3 MINUTES

NOTE: WRITE DOWN EACH TRANSMITTER'S TYPE AND ZONE NUMBER WHEN THE TRANSMITTER IS ADDED. THE CENTRAL STATION WILL NEED TO KNOW THE TYPE AND REPORTING ZONE FOR EACH TRANSMITTER

3

13. TESTING TRANSMITTERS

1 PRESS TEST BUTTON

• 4 BEEPS SOUND (TEST MODE)

2 ACTIVATE EACH OF THE CONSOLE'S TRANSMITTERS, ONE AT A TIME

3 COUNT THE NUMBER OF BEEPS THAT THE CONSOLE SOUNDS WHEN THE TRANSMITTER

IS ACTIVATED

1-BEEP= TX OK

2-BEEPS= TX HAD ALARM

3-BEEPS= TX MISSED STATUS

4-BEEPS= TX HAS LOW BATTERY

NOTE: WITH THE MODEL VB-4BVOICE BOARD

INSTALLED, THE CONSOLE WILL ANNOUNCE

THE TRANSMITTER STATUS

4PRESS CLEAR TO RETURN TO OPERATE MODE

2 BEEPS SOUND WITH ACTIVITY TIMER ENABLED

3 BEEPS SOUND WITH ACTIVITY TIMER DISABLED

THE CONSOLE WILL RETURN TO OPERATE MODE

AUTOMATICALLY AFTER 3 MINUTES

15. LOCAL PROGRAMMING WITH RA-2400

1PERFORM THE STEPS DETAILED IN THE RA-2400/PERS-2400REFERENCE GUIDE (P/N 217163) TO SET UP THERA-2400PROGRAM

2 TO LOCALLY PROGRAM

 

THE CONSOLE, CONNECT

 

THE MODEM'S LINE JACK

 

TO THE CONSOLE'S LINE

LINE-TO-LINE

JACK

 

3 PRESS TEST BUTTON MOMENTARILY

• 4 BEEPS SOUND (TEST MODE)

NOTE: CONSOLE WILL EXIT TEST MODE

AUTOMATICALLY AFTER 3 MINUTES

OR BY PRESSING THE CLEAR BUTTON

4WHEN RA-2400CONNECTION TIMER STARTS COUNTING DOWN, PRESS THE EMERGENCY BUTTON

• 4 BEEPS SOUND (RA-2400ANSWER)

5PERFORM PROGRAMMING IN THE RA-2400SOFTWARE, THEN

DISCONNECT FROM THE CONSOLE

14. ERASING TRANSMITTERS

CAUTION: ALL TRANSMITTERS

WILL BE ERASED!

1PRESS AND HOLD TEST BUTTON FOR 5 SECONDS

• 6 BEEPS SOUND (ALL TRANSMITTERS WERE ERASED)

2PRESS CLEAR TO RETURN TO OPERATE MODE

2 BEEPS SOUND WITH ACTIVITY TIMER ENABLED

3 BEEPS SOUND WITH ACTIVITY TIMER DISABLED

THE CONSOLE WILL RETURN TO OPERATE MODE

AUTOMATICALLY AFTER 3 MINUTES

16. TELEPHONE CONNECTIONS

LOCAL

TELEPHONE

TELEPHONE

JACK

 

CONSOLE WITH

 

REAR COVER

 

INSTALLED

ROUTE CABLES UNDER

 

STRAIN-RELIEFTABS

 

CONNECT LOCAL

CONNECT TELEPHONE

TELEPHONE TO

THIS JACK

LINE TO THIS JACK

4

17. SYSTEM OPERATION

CONSOLE

STANDING BY

POWER LIGHT IS ON

OTHER LIGHTS ARE OFF

- IN CASE OF EMERGENCY -

PRESS AND

MOMENTIARLY

HOLD

EMERGENCY

BUTTON

CONSOLE

IN ALARM

SENDING LIGHT

FLASHES DURING

COMMUNICATION

- OR - ACTIVATE EMERGENCY

TRANSMITTER

PRESS TRANSMITTERBUTTON FOR AT LEAST 2 SECONDS

SIREN SOUNDS

UNTIL CLEAR BUTTON

IS PRESSED,

CENTRAL STATION

REPORT IS COMPLETE, OR SIREN TIME EXPIRES

PRESS CLEAR TO STOP SIREN (ADDS CANCEL TO ALARM REPORT IN PROGRESS)

19. AUDIO BOARD OPERATION

1

2

3CENTRAL STATION OPERATOR:

PRESSING ANY KEY OTHER THAN "9" WILL EXTEND THE AUDIO TIME 90 MORE SECONDS

NOTE: TO USE THE AUDIO MODES, THE MODEL VB-4BAUDIO MODULE MUST BE INSTALLED IN THE CONSOLE

18. ACTIVITY TIMER

1 ENABLING THE ACTIVITY TIMER

PRESS THE HOME BUTTON FOR 5 SECONDS TO TURN THE

ACTIVITY TIMER ON

NOTE: THE ACTIVITY TIMER CAN

BE ENABLED FOR 8, 12, OR 24 HOURS, OR DISABLED BY PROGRAMMING

NOTE: TO TURN THE ACTIVITY TIMER OFF,

PRESS THE HOME BUTTON FOR FIVE SECONDS

2 ACTIVITY TIMER RUNNING

THE HOME INDICATOR WILL LIGHT, SHOWING THAT THE ACTIVITY TIMER IS ENABLED

4 RESETING ACTIVITY TIMER

THE SUBSCRIBER NEEDS TO PRESS THE HOME BUTTON OR TRIGGER AN ACTIVITY TRANSMITTER BEFORE THE TIMER EXPIRES TO PREVENT AN INACTIVITY REPORT

PRESSING THE HOME BUTTON RESTARTS THE TIMER

3 TIME RUNNING OUT

THE HOME INDICATOR WILL BLINK & A SHORT BEEP SOUNDS EVERY

10 SECONDS WHEN LESS THAN

15 MINUTES OF TIME REMAIN

20. SPEAKERPHONE OPERATION

1PROGRAM THE CONSOLE TO ENABLE SPEAKERPHONE MODE

NOTE: SPEAKERPHONE MODE CAN ONLY BE USED ON INCOMING CALLS AND WILL NOT FUNCTION WHEN THE CONSOLE IS OPERATING FROM BACKUP BATTERY POWER. ATTEMPTING TO ANSWER WHILE THE CONSOLE IS ON BACKUP POWER WILL CAUSE AN EMERGENCY ALARM.

2WHILE THE TELEPHONE IS RINGING, ACTIVATING AN EMERGENCY TRANSMITTER OR PRESSING THE EMERGENCY BUTTON WILL SEIZE THE TELEPHONE LINE

3THE AUDIO BOARD WILL BEGIN 2-WAYFULL DUPLEX MODE FOR AUDIO COMMUNICATIONS

WARNING: THE CONSOLE WILL NOT BE ABLE TO REPORT AN EMERGENCY WHILE THE SPEAKERPHONE MODE IS ACTIVE

NOTE: TO REPORT AN EMERGENCY WHEN THE SPEAKERPHONE IS IN USE, PRESS EITHER THE EMERGENCY BUTTON OR THE BUTTON ON AN EMERGENCY TRANSMITTER TO END THE PHONE CALL AND THEN PRESS ONE OF THESE BUTTONS AGAIN TO REPORT THE EMERGENCY.

4THE AUDIO BOARD WILL END AUDIO COMMUNICATIONS WHEN EITHER:

THE EMERGENCY BUTTON IS PRESSED

ANY EMERGENCY TRANSMITTER IS ACTIVATED

THE AUTO-DISCONNECTTIMER RUNS OUT

NOTE: TO USE THE SPEAKERPHONE MODE, THE MODEL VB-4BAUDIO MODULE MUST BE INSTALLED IN THE CONSOLE

5

21. SUPERVISORY CONDITIONS

TRANSMITTER LOW BATTERY TROUBLE

WHEN A TRANSMITTER SENDS A LOW BATTERY SIGNAL THE

CONSOLE'S TROUBLE INDICATOR WILL BLINK SLOWLY.

TRANSMITTER SUPERVISORY TROUBLE

IF A TRANSMITTER PROGRAMMED AS SUPERVISED FAILS

TO REPORT STATUS IN A 24 HOUR PERIOD, THE CONSOLE'S

TROUBLE INDICATOR WILL LIGHT.

CONSOLE BACKUP BATTERY TROUBLE

 

WHEN TROUBLE EXISTS,

THE CONSOLE WILL TEST ITS BACKUP

 

 

THE CONSOLE WILL BEEP EVERY

BATTERY EVERY 8 HOURS. IF THE BATTERY

HOUR UNTIL CLEARED:

TESTS LOW, THE POWER INDICATOR WILL

2-BEEPS= CONSOLE LOW BATTERY

BLINK SLOWLY WHILE THE CONSOLE

3-BEEPS= TRANSMITTER SUPERVISORY

CHARGES THE BATTERY.

4-BEEPS= TRANSMITTER LOW BATTERY

 

THE CONSOLE WILL REPORT TROUBLE AND/OR 30-DAYSTATUS TO THE CENTRAL STATION IF ENABLED IN THE COMMUNICATOR PROGRAMMING

CLEARING TROUBLE INDICATIONS

NOTE: THE CONSOLE WILL ANNOUNCE THE SUPERVISORY CONDITIONS WITH THE OPTIONAL MODEL VB-4BVOICE BOARD INSTALLED. THE VOICE CAN BE DISABLED THROUGH PROGRAMMING

PRESS THE CLEAR BUTTON TO STOP TROUBLE

INDICATORS AND SOUNDERS

NOTE: THE TROUBLE CONDITION WILL LIKELY OCCUR AGAIN

UNTIL THE PROBLEM IS FIXED

SPECIFICATIONS

CODING FORMATS

DX CODE 24-BITA1D PPM

1,048,567 CODES

DXS CODE 24-BITA1D PPM

1,048,567 CODES

POWER REQUIREMENTS

PRIMARY SUPPLY

16 VAC 1.25 AMP PLUG-INTRANSFORMER

BACKUP SUPPLY

12 VOLT 1.2 AMP/HOUR BATTERY

NORMAL OPERATING CURRENT

80 mA

ALARM OPERATING CURRENT

120 mA

BACKUP OPERATION DURATION

32 HOURS MINIMUM

BATTERY LIFE EXPECTED

3 YEARS

BACKUP SUPPLY OPERATING CURRENT

32 mA

RF CHARACTERISTICS

RECEIVER TYPE

DUAL-DIVERSITYSUPERHETERODYNE

RF SENSITIVITY

-100dBm TYPICAL

RADIO FREQUENCY

315 Mhz

MAXIMUM RANGE

400 FEET LINE-OF-SIGHT,OPEN RANGE

 

UL LISTED FOR 150’

COMMUNICATOR

COMMUNICATOR FORMATS

4 BY 2 (GENERAL OR POINT-TO-POINT),

 

ADEMCO CONTACT ID

 

UL TESTED WITH SURGARD SGMLRG-DG

 

CENTRAL STATION RECEIVER

 

 

 

 

DIALING

TONE OR PULSE

 

DIALING DELAY

0 OR 15 SECONDS

REMOTE ACCESS PASSWORD

6 DIGITS

NOTE: THE INSTALLER MUST

ACCOUNT NUMBER LENGTH

4 DIGITS

VERIFY COMPATIBILITY

PRIMARY TELEPHONE NUMBER

20 DIGITS

BETWEEN THE PERS-2400BAND

SECONDARY TELEPHONE NUMBER

20 DIGITS

THE UL LISTED DIGITAL ALARM

SUPERVISORY TELEPHONE NUMBER

20 DIGITS

COMMUNICATOR RECEIVER

 

 

 

CONSOLE STATUS REPORT

OPTIONAL 1,

7 OR 30 DAY REPORT

CONSOLE

OPERATING TEMPERATURE

32°-100°F(0-50°C)

EMERGENCY ALARM DURATION

1-30MINUTES

ACTIVITY TIMER PERIOD

8, 12, OR 24 HOURS

AUDIO

LISTEN-ONLY,2-WAYMANUAL,2-WAYDUPLEX,

SPEAKERPHONE

 

RELAY OUTPUT

N.O. @ 24 VOLT AC/DC 1 AMP

 

MAXIMUM, NEC CLASS II CIRCUITRY

22. WIRELESS INSTALLATION TIPS

WALLBOARD AND

 

WOOD STUDS

CONSTRUCTION

MATERIALS WILL AFFECT RADIO RANGE

90% - 100% OF FULL POWER

LIGHT CONCRETE

CONCRETE WITH STEEL

REINFORCEMENT OR

OR BRICK

METAL LATH AND PLASTER

 

65% - 95%

10% - 70%

OF FULL POWER

OF FULL POWER

CENTRALLY LOCATE CONSOLE

CONSOLE LOCATION WILL

RIGHT

AFFECT RADIO RANGE

TRANSMITTERS AT THE

OTHER END OF THE HOUSE

MIGHT BE TOO FAR AWAY

WRONG!

LINEAR LIMITED WARRANTY

This Linear product is warranted against defects in material and workmanship for twelve

(12) months. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal distribution channels. Linear does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities on the part of Linear LLC for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation. All implied warranties, including implied warranties for merchantability and implied warranties for fi tness, are valid only until the warranty expires.This Linear LLC Warranty is in lieu of all other warranties express or implied.

All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact Linear Technical Services at 1-800-421-1587for an RPA# and other important details.

IMPORTANT WIRELESS INFORMATION

Linear radio controls provide a reliable communications link and fi ll an important need in portable wireless signaling. However, there are some limitations which must be observed.

For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as Part 15 devices. As such, they have limited transmitter power and therefore limited range.

A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals that occur on or near their operating frequencies, regardless of code settings.

Changes or modifi cations to the device may void FCC compliance.

Infrequently used radio links should be tested regularly to protect against undetected interference or fault.

A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor or dealer, and these facts should be communicated to the ultimate users.

Copyright © 2008 Linear LLC

228279 B